sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add a general bit-bang SPI upper-half driver

Browse Source
This commit is contained in:
Gregory Nutt 2013-07-01 12:23:26 -06:00
parent 17810f3e6f
commit a82077e0fc
5 changed files with 199 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
configs/arduino-due/Kconfig
View File

@ -4,4 +4,13 @@
#
if ARCH_BOARD_ARDUINO_DUE
config ARDUINO_ITHEAD_TFT
bool "ITEAD 2.4 inch TFT w/Touch"
default n
---help---
Select this option if you have the ITEAD 2.4" TFT module installed.
This will enable support for the peripherals on that module
including the SD card, TFT LCD, and touchscreen controller.
endif

22
configs/arduino-due/README.txt
View File

@ -122,19 +122,22 @@ ITEAD 2.4" TFT with Touch
The Arduino 2.4" TFT Touch shield uses the S6D1121 controller , it
supports 8-bit data interface. The touch IC is TSC2046.
---------- --------------------------- ----------- ----- ---------- ------------------
Arduino ATSAM3X Due ITHEAD
Due PIN GPIO FUNCTION SIGNAL PIN SIGNAL NOTES
---------- ---- ---------------------- ----------- ----- ---------- ------------------
PWMH
10 SCL1 PA18 TWCK0/A20/WKUP9 SCL1 --- --- SCL not available
9 SDA1 PA17 TWD0SPCK0 SDA1 --- --- SDA not available
8 Aref --- --- AREF Vref --- ---
7 GND --- --- GND GND --- ---
6 PWM13 PB27 SPI0_SPCK/A20/WKUP10 PWM13 D13 SD_SCK SCK, also LED "L"
6 PWM13 PB27 SPI0_SPCK/A20/WKUP10 PWM13 D13 SD_SCK SCK, also LED "L", Pulled low on-board
5 PWM12 PD8 A21/NANDALE/TIOB8 PWM12 D12 SD_MISO MISO not available
4 PWM11 PD7 A17/BA1/TIOA8 PWM11 D11 SD_MOSI MOSI not available
3 PWM10 ??? ??? SS0/PWM10 D10 SD_CS ???
2 PWM9 PC21 A0/NBS0/PWML4 PWM9 D9 Touch_IRQ ---
1 PWM8 PC22 A1/PWML5 PWM8 D8 Touch_Dout ---
4 PWM11 PD7 A17/BA1/TIOA8 PWM11 D11 SD_MOSI MOSI not available, Pulled low on-board
3 PWM10 ??? ??? SS0/PWM10 D10 SD_CS Pulled low on-board
2 PWM9 PC21 A0/NBS0/PWML4 PWM9 D9 Touch_Dout ---
1 PWM8 PC22 A1/PWML5 PWM8 D8 Touch_IRQ ---
PWML
8 PWM7 PC23 A2/PWML6 PWM7 D7 DB15 ---
7 PWM6 PC24 A3/PWML7 PWM6 D6 DB14 ---
@ -144,7 +147,7 @@ ITEAD 2.4" TFT with Touch
3 PWM2 PB25 RTS0/TIOA0 PWM2 D2 DB10 ---
2 PWM1 PA9 UTXD/PWMH3 TX D1 DB9 UART0 TX
1 PWM0 PA8 URXD/PWMH0/WKUP4 RX D0 DB8 UART0 RX
---------- ---- ---------------------- ----------- ----- ---------- ------------------
POWER
1 --- --- --- --- --- --- ---
2 IOref --- --- IOREF +3V3 --- --- ---
@ -163,14 +166,15 @@ ITEAD 2.4" TFT with Touch
6 A5 PA4 TCLK1/NWAIT/AD2 AD5 A5 TFT_RS ---
7 A6 PA3 TIOB1/PWMFI1/AD1/WKUP1 AD6 --- --- ---
8 A7 PA2 TIOA1/NANDRDY/AD0 AD7 --- --- ---
---------- ---- ---------------------- ----------- ----- ---------- ------------------
NOTE:
NOTES:
1. It is not possible to use any of the SPI devices on the Shield unless
a bit-bang SPI interface is used. This includes the touch controller
and the SD card.
2. UART0 cannot be used
3. Parallel data is not contiguous in any PIO register
2. UART0 cannot be used. USARTs on the COMM connector should be available.
3. Parallel data is not contiguous in the PIO register
4. 3.3V and 5V are reversed.
Development Environment

1
configs/arduino-due/nsh/defconfig
View File

@ -245,6 +245,7 @@ CONFIG_NSH_MMCSDMINOR=0
#
# Board-Specific Options
#
# CONFIG_ARDUINO_ITHEAD_TFT is not set
#
# RTOS Features

17
configs/arduino-due/src/Makefile
View File

@ -52,6 +52,23 @@ else
CSRCS += sam_userleds.c
endif
ifeq ($(CONFIG_ARDUINO_ITHEAD_TFT),y)
ifeq ($(CONFIG_SPI_BITBANG),y)
ifeq ($(CONFIG_MMC_SPI),y)
CSRCS += sam_mmcsd.c
endif
ifeq ($(CONFIG_INPUT),y)
CSRCS += sam_touchscreen.c
endif
endif
ifeq ($(CONFIG_LCD),y)
CSRCS += sam_lcd.c
endif
endif
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)

157
configs/arduino-due/src/arduino-due.h
View File

@ -97,6 +97,163 @@
#define GPIO_LED_TX (GPIO_OUTPUT | GPIO_CFG_PULLUP | GPIO_OUTPUT_SET | \
GPIO_PORT_PIOA | GPIO_PIN21)
/* ITEAD 2.4" TFT with Touch
*
* The Arduino 2.4" TFT Touch Shield is designed for all the Arduino
* compatible boards. It works in 3.3V voltage level. It can be directly
* plugged on the Arduino and other compatible boards. It will offer
* display, touch and storage functions for the Arduino board
*
* Features:
*
* 1. Compatible with 3.3/5V operation voltage level
* 2. Compatible with UTFT library
* 3. With SD Card Socket
*
* The Arduino 2.4" TFT Touch shield uses the S6D1121 controller , it
* supports 8-bit data interface. The touch IC is TSC2046.
*
* ---------- --------------------------- ----------- ----- ---------- ------------------
* Arduino ATSAM3X Due ITHEAD
* Due PIN GPIO FUNCTION SIGNAL PIN SIGNAL NOTES
* ---------- ---- ---------------------- ----------- ----- ---------- ------------------
* PWMH
* 10 SCL1 PA18 TWCK0/A20/WKUP9 SCL1 --- --- SCL not available
* 9 SDA1 PA17 TWD0SPCK0 SDA1 --- --- SDA not available
* 8 Aref --- --- AREF Vref --- ---
* 7 GND --- --- GND GND --- ---
* 6 PWM13 PB27 SPI0_SPCK/A20/WKUP10 PWM13 D13 SD_SCK SCK, also LED "L", Pulled low on-board
* 5 PWM12 PD8 A21/NANDALE/TIOB8 PWM12 D12 SD_MISO MISO not available
* 4 PWM11 PD7 A17/BA1/TIOA8 PWM11 D11 SD_MOSI MOSI not available, Pulled low on-board
* 3 PWM10 ??? ??? SS0/PWM10 D10 SD_CS Pulled low on-board
* 2 PWM9 PC21 A0/NBS0/PWML4 PWM9 D9 Touch_Dout ---
* 1 PWM8 PC22 A1/PWML5 PWM8 D8 Touch_IRQ ---
* PWML
* 8 PWM7 PC23 A2/PWML6 PWM7 D7 DB15 ---
* 7 PWM6 PC24 A3/PWML7 PWM6 D6 DB14 ---
* 6 PWM5 PC25 A4/TIOA6 PWM5 D5 DB13 ---
* 5 PWM4 PC26 A5/TIOB6 SS1/PWM4 D4 DB12 ---
* 4 PWM3 PC28 A7/TIOA7 PWM3 D3 DB11 ---
* 3 PWM2 PB25 RTS0/TIOA0 PWM2 D2 DB10 ---
* 2 PWM1 PA9 UTXD/PWMH3 TX D1 DB9 UART0 TX
* 1 PWM0 PA8 URXD/PWMH0/WKUP4 RX D0 DB8 UART0 RX
* ---------- ---- ---------------------- ----------- ----- ---------- ------------------
* POWER
* 1 --- --- --- --- --- --- ---
* 2 IOref --- --- IOREF +3V3 --- --- ---
* 3 RESET --- --- MASTER_RESET RST --- ---
* 4 3.3V --- --- +3V3 5V --- ---
* 5 5V --- --- +5V 3.3V --- ---
* 6 GND --- --- GND GND --- ---
* 7 GND --- --- GND GND --- ---
* 8 Vin --- --- VIN Vin --- ---
* ADCL
* 1 A0 PA16 SPCK1/TD/AD7 AD0 A0 Touch_Din ---
* 2 A1 PA24 MCDA3/PCK1/AD6 AD1 A1 Touch_CLK ---
* 3 A2 PA23 MCDA2/TCLK4/AD5 AD2 A2 --- ---
* 4 A3 PA22 MCDA1/TCLK3/AD4 AD3 A3 TFT_CS ---
* 5 A4 PA6 TIOB2/NCS0/AD3 AD4 A4 TFT_WR ---
* 6 A5 PA4 TCLK1/NWAIT/AD2 AD5 A5 TFT_RS ---
* 7 A6 PA3 TIOB1/PWMFI1/AD1/WKUP1 AD6 --- --- ---
* 8 A7 PA2 TIOA1/NANDRDY/AD0 AD7 --- --- ---
* ---------- ---- ---------------------- ----------- ----- ---------- ------------------
*
* NOTES:
*
* 1. It is not possible to use any of the SPI devices on the Shield unless
* a bit-bang SPI interface is used. This includes the touch controller
* and the SD card.
* 2. UART0 cannot be used. USARTs on the COMM connector should be available.
* 3. Parallel data is not contiguous in the PIO register
* 4. 3.3V and 5V are reversed.
*/
#ifdef CONFIG_ARDUINO_ITHEAD_TFT
/* In order to use the SD card on the ITEAD shield, you must enable the
* SPI bit-bang driver as well as support for SPI-based MMC/SD cards.
*/
# if defined(CONFIG_SPI_BITBANG) && defined(CONFIG_MMC_SPI)
/* The SD slot shares the pin with LED "L" so LED support must be disabled
* to use the MMC/SD card on the ITEAD shield.
*/
# ifdef CONFIG_ARCH_LEDs
# error LEDs may not be used with the ITEAD SD card
# endif
# define GPIO_SD_SCK (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOB | GPIO_PIN27)
# define GPIO_SD_MISO (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOD | GPIO_PIN8)
# define GPIO_SD_MOSI (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOD | GPIO_PIN7)
# define GPIO_SD_CS (GPIO_OUTPUT | GPIO_CFG_PULLUP | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIO? | GPIO_PIN?)
# endif
/* In order to use the touchscreen on the ITEAD shield, you must enable the
* SPI bit-bang driver and INPUT device support.
*/
# if defined(CONFIG_SPI_BITBANG) && defined(CONFIG_INPUT)
# define GPIO_TSC_SCK (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOA | GPIO_PIN24)
# define GPIO_TSC_MISO (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOC | GPIO_PIN21)
# define GPIO_TSC_MOSI (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOA | GPIO_PIN16)
# define GPIO_TSC_CS (GPIO_OUTPUT | GPIO_CFG_PULLUP | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIO? | GPIO_PIN?)
# define GPIO_TSC_IRQ (GPIO_INPUT | GPIO_CFG_PULLUP | GPIO_INT_BOTHEDGES | \
GPIO_PORT_PIOC | GPIO_PIN22)
# define SAM_TCS_IRQ SAM_IRQ_PC21
# endif
/* Only CONFIG_LCD is expected to enable the TFT LCD */
# ifdef CONFIG_LCD
/* UART0 cannot be used with the LCD because the UART0 pins are used
* by the LCD.
*/
# ifdef CONFIG_SAM34_UART0
# error "UART0 cannot be used with the ITEAD LCD"
# endif
/* Data pins are initially configured but may be switched dynamically to
* either inputs or outputs as needed.
*/
# define GPIO_LCD_D0IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOA | GPIO_PIN8)
# define GPIO_LCD_D1IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOA | GPIO_PIN9)
# define GPIO_LCD_D2IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOB | GPIO_PIN25)
# define GPIO_LCD_D3IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOC | GPIO_PIN28)
# define GPIO_LCD_D4IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOC | GPIO_PIN26)
# define GPIO_LCD_D5IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOC | GPIO_PIN25)
# define GPIO_LCD_D6IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOC | GPIO_PIN24)
# define GPIO_LCD_D7IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOC | GPIO_PIN23)
# define GPIO_LCD_D7IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOC | GPIO_PIN23)
# define GPIO_LCD_CS (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOA | GPIO_PIN22)
# define GPIO_LCD_WR (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOA | GPIO_PIN6)
# define GPIO_LCD_RS (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
GPIO_PORT_PIOA | GPIO_PIN4)
# endif
#endif
/************************************************************************************
* Public Types
************************************************************************************/