diff --git a/ChangeLog b/ChangeLog
index 51d04294cf..6a074400d1 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -6736,4 +6736,7 @@
           kconfig-frontends tools (2014-3-1).
 	*  configs/ea3152/ostest: Configuration converted to use the
           kconfig-frontends tools (2014-3-1).
+	* configs/stm3210e-eval/RIDE, nxlines, and nxtext:  Remove some old
+	  style configurations that are not worth converting to use the
+	  kconfig-frontends tools (2014-3-2).
 
diff --git a/configs/stm3210e-eval/README.txt b/configs/stm3210e-eval/README.txt
index b7f6192a58..768f121355 100644
--- a/configs/stm3210e-eval/README.txt
+++ b/configs/stm3210e-eval/README.txt
@@ -48,13 +48,13 @@ GNU Toolchain Options
   add one of the following configuration options to your .config (or defconfig)
   file:
 
-    CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
-    CONFIG_STM32_CODESOURCERYL=y  : CodeSourcery under Linux
-    CONFIG_STM32_DEVKITARM=y      : devkitARM under Windows
-    CONFIG_STM32_RAISONANCE=y     : Raisonance RIDE7 under Windows
-    CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y  : CodeSourcery under Linux
+    CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM=y      : devkitARM under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE=y     : Raisonance RIDE7 under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)
 
-  If you are not using CONFIG_STM32_BUILDROOT, then you may also have to modify
+  If you are not using CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT, then you may also have to modify
   the PATH in the setenv.h file if your make cannot find the tools.
 
   NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
@@ -696,7 +696,7 @@ Where <subdir> is one of the following:
     Uses apps/examples/buttons to exercise STM3210E-EVAL buttons and
     button interrupts.
 
-    CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y  : CodeSourcery under Windows
 
   composite
   ---------
@@ -785,15 +785,15 @@ Where <subdir> is one of the following:
        a. examples/can.  The CAN test example can be enabled by changing the
           following settings in nsh2/defconfig:
 
-          CONFIG_CAN=y             # Enable CAN "upper-half" driver support
-          CONFIG_STM32_CAN1=y      # Enable STM32 CAN1 "lower-half" driver support
+          CONFIG_CAN=y             : Enable CAN "upper-half" driver support
+          CONFIG_STM32_CAN1=y      : Enable STM32 CAN1 "lower-half" driver support
 
           The default CAN settings may need to change in your board board
           configuration:
 
-          CONFIG_CAN_EXTID=y       # Support extended IDs
-          CONFIG_CAN1_BAUD=250000  # Bit rate: 250 KHz
-          CONFIG_CAN_TSEG1=12      # 80% sample point
+          CONFIG_CAN_EXTID=y       : Support extended IDs
+          CONFIG_CAN1_BAUD=250000  : Bit rate: 250 KHz
+          CONFIG_CAN_TSEG1=12      : 80% sample point
           CONFIG_CAN_TSEG2=3
   nx:
   ---
@@ -801,9 +801,92 @@ Where <subdir> is one of the following:
     focuses on general window controls, movement, mouse and keyboard
     input.
 
-      CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
+      CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y  : CodeSourcery under Windows
       CONFIG_LCD_RPORTRAIT=y        : 240x320 reverse portrait
 
+    NOTES:
+
+    1. This example provides a framework for a number of other standalone
+       graphics tests.
+
+       a. apps/examples/nxlines:  The NXLINES graphic example illustrates
+          drawing of fat lines in various orientations.  You can modify
+          this configuration so to support the NXLINES example by making
+          the following modifications to the NuttX configuration file:
+
+          Provide the new start-up entry point:
+
+            CONFIG_USER_ENTRYPOINT="nxlines_main"
+
+          Disable apps/examples/nx:
+
+            CONFIG_EXAMPLES_NX=n
+
+          Enable and configure apps/nxlines/nxlines:
+
+            CONFIG_EXAMPLES_NXLINES=y
+            CONFIG_EXAMPLES_NXLINES_VPLANE=0
+            CONFIG_EXAMPLES_NXLINES_DEVNO=0
+            CONFIG_EXAMPLES_NXLINES_DEFAULT_COLORS=n
+            CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320
+            CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
+            CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0
+            CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4
+            CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0
+            CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb
+            CONFIG_EXAMPLES_NXLINES_BPP=16
+            CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n
+
+       b. apps/examples/nxtext:  Another example using the NuttX graphics
+          system (NX).   This example focuses on placing text on the
+          background while pop-up windows occur.  Text should continue to
+          update normally with  or without the popup windows present.
+
+          You can modify this configuration so to support the NXLINES
+          example by making the following modifications to the NuttX
+          configuration file:
+
+          Provide the new start-up entry point:
+
+            CONFIG_USER_ENTRYPOINT="nxtext_main"
+
+          Disable apps/examples/nx:
+
+            CONFIG_EXAMPLES_NX=n
+
+          Enable an NX font:
+
+            CONFIG_NXFONT_SERIF22X28B=y
+
+          Enable and configure apps/nxlines/nxtext:
+
+            CONFIG_EXAMPLES_NXTEXT=y
+            CONFIG_EXAMPLES_NXTEXT_VPLANE=0
+            CONFIG_EXAMPLES_NXTEXT_DEVNO=0
+            CONFIG_EXAMPLES_NXTEXT_BPP=16
+            CONFIG_EXAMPLES_NXTEXT_BMCACHE=512
+            CONFIG_EXAMPLES_NXTEXT_GLCACHE=16
+            CONFIG_EXAMPLES_NXTEXT_DEFAULT_COLORS=n
+            CONFIG_EXAMPLES_NXTEXT_BGCOLOR=0x0011
+            CONFIG_EXAMPLES_NXTEXT_BGFONTCOLOR=0xffdf
+            CONFIG_EXAMPLES_NXTEXT_PUCOLOR=0xfd20
+            CONFIG_EXAMPLES_NXTEXT_PUFONTCOLOR=0x001f
+            CONFIG_EXAMPLES_NXTEXT_DEFAULT_FONT=n
+            CONFIG_EXAMPLES_NXTEXT_BGFONTID=11
+            CONFIG_EXAMPLES_NXTEXT_PUFONTID=1
+            CONFIG_EXAMPLES_NXTEXT_EXTERNINIT=n
+
+          If you conconfigured the multi-used NX server (which is disabled
+          by default), then you would also nee:
+
+            CONFIG_EXAMPLES_NXTEXT_STACKSIZE=2048
+            CONFIG_EXAMPLES_NXTEXT_CLIENTPRIO=80
+            CONFIG_EXAMPLES_NXTEXT_SERVERPRIO=120
+            CONFIG_EXAMPLES_NXTEXT_NOTIFYSIGNO=4
+
+        c. Others could be similar configured:  apps/examples/nxhello,
+            nximage, ...
+
   nxconsole:
   ----------
     This is yet another NSH configuration.  This NSH configuration differs
@@ -829,32 +912,8 @@ Where <subdir> is one of the following:
 
     Other configuration settings:
 
-      CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
-      CONFIG_LCD_LANDSCAPE=y        : 320x240 landscape
-
-  nxlines:
-  ------
-    Another example using the NuttX graphics system (NX).   This
-    example focuses on placing lines on the background in various
-    orientations.
-
-      CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
-      CONFIG_LCD_RPORTRAIT=y        : 240x320 reverse portrait
-
-  nxtext:
-  ------
-    Another example using the NuttX graphics system (NX).   This
-    example focuses on placing text on the background while pop-up
-    windows occur.  Text should continue to update normally with
-    or without the popup windows present.
-
-      CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
-      CONFIG_LCD_RPORTRAIT=y        : 240x320 reverse portrait
-
-    NOTE:  When I tried building this example with the CodeSourcery
-    tools, I got a hardfault inside of its libgcc.  I haven't
-    retested since then, but beware if you choose to change the
-    toolchain.
+      CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : NuttX buildroot under Linux or Cygwin
+      CONFIG_LCD_LANDSCAPE=y              : 320x240 landscape
 
   pm:
   --
@@ -865,7 +924,7 @@ Where <subdir> is one of the following:
     configuration should provide some guideline for power management in your
     STM32 application.
 
-      CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
+      CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y  : CodeSourcery under Windows
 
     CONFIG_PM_CUSTOMINIT and CONFIG_IDLE_CUSTOM are necessary parts of the
     PM configuration:
@@ -903,20 +962,13 @@ Where <subdir> is one of the following:
     STANDBY mode.  This used of the RTC alarm could conflict with other uses of
     the RTC alarm in your application.
 
-  RIDE
-  ----
-    This configuration builds a trivial bring-up binary.  It is
-    useful only because it words with the RIDE7 IDE and R-Link debugger.
-
-      CONFIG_STM32_RAISONANCE=y     : Raisonance RIDE7 under Windows
-
   usbserial:
   ---------
     This configuration directory exercises the USB serial class
     driver at examples/usbserial.  See examples/README.txt for
     more information.
 
-      CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
+      CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
 
     USB debug output can be enabled as by changing the following
     settings in the configuration file:
@@ -966,5 +1018,5 @@ Where <subdir> is one of the following:
     class driver at system/usbmsc.  See examples/README.txt for
     more information.
 
-      CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
+      CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
 
diff --git a/configs/stm3210e-eval/RIDE/.gitignore b/configs/stm3210e-eval/RIDE/.gitignore
deleted file mode 100644
index 94ae1f24d1..0000000000
--- a/configs/stm3210e-eval/RIDE/.gitignore
+++ /dev/null
@@ -1,7 +0,0 @@
-*.xml
-*.elf
-*.hex
-*.map
-*.lst
-*.sizetmp
-
diff --git a/configs/stm3210e-eval/RIDE/Make.defs b/configs/stm3210e-eval/RIDE/Make.defs
deleted file mode 100644
index d838c78acc..0000000000
--- a/configs/stm3210e-eval/RIDE/Make.defs
+++ /dev/null
@@ -1,116 +0,0 @@
-############################################################################
-# configs/stm3210e-eval/RIDE/Make.defs
-#
-#   Copyright (C) 2009 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-include ${TOPDIR}/.config
-include ${TOPDIR}/tools/Config.mk
-include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
-
-ifeq ($(CONFIG_STM32_DFU),y)
-  LDSCRIPT = ld.script.dfu
-else
-  LDSCRIPT = ld.script
-endif
-
-ifeq ($(WINTOOL),y)
-  # Windows-native toolchains
-  DIRLINK = $(TOPDIR)/tools/copydir.sh
-  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
-  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
-  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
-  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
-else
-  # Linux/Cygwin-native toolchain 
-  MKDEP = $(TOPDIR)/tools/mkdeps.sh
-  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
-  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
-endif
-
-CC = $(CROSSDEV)gcc
-CXX = $(CROSSDEV)g++
-CPP = $(CROSSDEV)gcc -E
-LD = $(CROSSDEV)ld
-AR = $(CROSSDEV)ar rcs
-NM = $(CROSSDEV)nm
-OBJCOPY = $(CROSSDEV)objcopy
-OBJDUMP = $(CROSSDEV)objdump
-
-ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
-ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
-
-ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
-  ARCHOPTIMIZATION = -g
-endif
-
-ifneq ($(CONFIG_DEBUG_NOOPT),y)
-  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
-endif
-
-ARCHCFLAGS = -fno-builtin
-ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
-ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
-ARCHWARNINGSXX = -Wall -Wshadow
-ARCHDEFINES =
-ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
-
-CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
-CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
-CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
-CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
-CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
-AFLAGS = $(CFLAGS) -D__ASSEMBLY__
-
-NXFLATLDFLAGS1 = -r -d -warn-common
-NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
-LDNXFLATFLAGS = -e main -s 2048
-
-OBJEXT = .o
-LIBEXT = .a
-EXEEXT =
-
-ifneq ($(CROSSDEV),arm-nuttx-elf-)
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
-  LDFLAGS += -g
-endif
-
-
-HOSTCC = gcc
-HOSTINCLUDES = -I.
-HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
-HOSTLDFLAGS =
-
diff --git a/configs/stm3210e-eval/RIDE/README.txt b/configs/stm3210e-eval/RIDE/README.txt
deleted file mode 100644
index b8f40e4004..0000000000
--- a/configs/stm3210e-eval/RIDE/README.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-README
-------
-
-This directory contains a simple RIDE7 project used to bring up the
-STM3210E-EVAL board.  This project includes only the STM32 boot-up
-code under arch/arm/src and configs/stm3210e-eval/src plus as little
-additional environmental support as necessary.
-
-bigfatstub.c
-
-  The NuttX OS is not included in this project.  This file contains
-  stubs for all of the NuttX entry points and this replaces NuttX
-
-Make.defs, defconfig, setenv.h
-
-  The first step to using this RIDE project is to build a compatible
-  cygwin project.  This will set up of the directories and produce
-  all of the necessary autogenerated files.
-
-    cd tools
-    ./configure.sh stm3210e-eva/RIDE
-    cd ..
-    . ./setenv.sh
-    make
-
-nuttx.*
-
-  RIDE7 project files
-  
-../scripts/ld.scrip
-
-  This is the linker script that replaces the RIDE7 linker script.
-
-stm32-ld.sh
-
-  This is a shell script that will use the RIDE7 tools to relink the
-  NuttX binaries.  Useful because RIDE7 does not provide much linker
-  output to see what is going on.
diff --git a/configs/stm3210e-eval/RIDE/appconfig b/configs/stm3210e-eval/RIDE/appconfig
deleted file mode 100644
index 138b4e47a4..0000000000
--- a/configs/stm3210e-eval/RIDE/appconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-############################################################################
-# configs/stm3210e-eval/RIDE/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/null
-
diff --git a/configs/stm3210e-eval/RIDE/bigfatstub.c b/configs/stm3210e-eval/RIDE/bigfatstub.c
deleted file mode 100644
index 8473ec19b9..0000000000
--- a/configs/stm3210e-eval/RIDE/bigfatstub.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <stdint.h>
-#include <nuttx/irq.h>
-#include "up_internal.h"
-
-void os_start(void)
-{
-	up_lowputc('X');
-	up_lowputc('\n');
-	for (;;);
-}
-
-void up_assert(const uint8_t *filename, int lineno)
-{
-	up_lowputc('?');
-	up_lowputc('\n');
-	for (;;);
-}
-
-int irq_attach(int irq, xcpt_t isr)
-{
-	up_lowputc('A');
-	up_lowputc('\n');
-	for (;;);
-}
-
-uint32_t *up_doirq(int irq, uint32_t *regs)
-{
-	up_lowputc('I');
-	up_lowputc('\n');
-	for (;;);
-}
\ No newline at end of file
diff --git a/configs/stm3210e-eval/RIDE/defconfig b/configs/stm3210e-eval/RIDE/defconfig
deleted file mode 100644
index e7adf2665b..0000000000
--- a/configs/stm3210e-eval/RIDE/defconfig
+++ /dev/null
@@ -1,475 +0,0 @@
-############################################################################
-# configs/stm3210e-eval/RIDE/defconfig
-#
-#   Copyright (C) 2009-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
-#
-CONFIG_ARCH="arm"
-CONFIG_ARCH_ARM=y
-CONFIG_ARCH_CORTEXM3=y
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32F103ZET6=y
-CONFIG_ARCH_BOARD="stm3210e-eval"
-CONFIG_ARCH_BOARD_STM3210E_EVAL=y
-CONFIG_BOARD_LOOPSPERMSEC=5483
-CONFIG_RAM_SIZE=65536
-CONFIG_RAM_START=0x20000000
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=n
-
-#
-# Identify toolchain
-CONFIG_STM32_CODESOURCERYW=n
-CONFIG_STM32_CODESOURCERYL=n
-CONFIG_STM32_DEVKITARM=n
-CONFIG_STM32_RAISONANCE=y
-CONFIG_STM32_BUILDROOT=n
-
-#
-# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
-#
-CONFIG_STM32_DFU=n
-CONFIG_STM32_JTAG_FULL_ENABLE=y
-CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
-CONFIG_STM32_JTAG_SW_ENABLE=n
-
-#
-# Individual subsystems can be enabled:
-CONFIG_STM32_TIM2=n
-CONFIG_STM32_TIM3=n
-CONFIG_STM32_TIM4=n
-CONFIG_STM32_TIM5=n
-CONFIG_STM32_TIM6=n
-CONFIG_STM32_TIM7=n
-CONFIG_STM32_WWDG=n
-CONFIG_STM32_IWDG=n
-CONFIG_STM32_SPI2=n
-CONFIG_STM32_SPI4=n
-CONFIG_STM32_USART2=y
-CONFIG_STM32_USART3=n
-CONFIG_STM32_UART4=n
-CONFIG_STM32_UART5=n
-CONFIG_STM32_I2C1=n
-CONFIG_STM32_I2C2=n
-CONFIG_STM32_USB=y
-CONFIG_STM32_CAN1=n
-CONFIG_STM32_BKP=n
-CONFIG_STM32_PWR=n
-CONFIG_STM32_DAC=n
-CONFIG_STM32_ADC1=n
-CONFIG_STM32_ADC2=n
-CONFIG_STM32_TIM1=n
-CONFIG_STM32_SPI1=n
-CONFIG_STM32_TIM8=n
-CONFIG_STM32_USART1=y
-CONFIG_STM32_ADC3=n
-
-#
-# Timer and I2C devices may need to the following to force power to be applied:
-#
-#CONFIG_STM32_FORCEPOWER=y
-
-#
-# STM32F103Z specific serial device driver settings
-#
-CONFIG_USART1_SERIAL_CONSOLE=y
-CONFIG_USART2_SERIAL_CONSOLE=n
-CONFIG_USART3_SERIAL_CONSOLE=n
-CONFIG_UART4_SERIAL_CONSOLE=n
-CONFIG_UART5_SERIAL_CONSOLE=n
-
-CONFIG_USART1_TXBUFSIZE=256
-CONFIG_USART2_TXBUFSIZE=256
-CONFIG_USART3_TXBUFSIZE=256
-CONFIG_UART4_TXBUFSIZE=256
-CONFIG_UART5_TXBUFSIZE=256
-
-CONFIG_USART1_RXBUFSIZE=256
-CONFIG_USART2_RXBUFSIZE=256
-CONFIG_USART3_RXBUFSIZE=256
-CONFIG_UART4_RXBUFSIZE=256
-CONFIG_UART5_RXBUFSIZE=256
-
-CONFIG_USART1_BAUD=115200
-CONFIG_USART2_BAUD=115200
-CONFIG_USART3_BAUD=115200
-CONFIG_UART4_BAUD=115200
-CONFIG_UART5_BAUD=115200
-
-CONFIG_USART1_BITS=8
-CONFIG_USART2_BITS=8
-CONFIG_USART3_BITS=8
-CONFIG_UART4_BITS=8
-CONFIG_UART5_BITS=8
-
-CONFIG_USART1_PARITY=0
-CONFIG_USART2_PARITY=0
-CONFIG_USART3_PARITY=0
-CONFIG_UART4_PARITY=0
-CONFIG_UART5_PARITY=0
-
-CONFIG_USART1_2STOP=0
-CONFIG_USART2_2STOP=0
-CONFIG_USART3_2STOP=0
-CONFIG_UART4_2STOP=0
-CONFIG_UART5_2STOP=0
-
-#
-# STM3210E-EVAL specific LCD settings
-#
-CONFIG_STM32_AM240320_DISABLE=n
-CONFIG_STM32_SPFD5408B_DISABLE=n
-CONFIG_STM32_R61580_DISABLE=y
-
-#
-# General build options
-#
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=y
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=n
-
-#
-# General OS setup
-#
-CONFIG_USER_ENTRYPOINT="null_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_DEBUG_SCHED=y
-CONFIG_HAVE_CXX=n
-CONFIG_HAVE_CXXINITIALIZE=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2009
-CONFIG_START_MONTH=9
-CONFIG_START_DAY=21
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
-CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=y
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_NXFLAT=n
-CONFIG_SCHED_WORKQUEUE=n
-CONFIG_SCHED_WORKPRIORITY=192
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=1024
-CONFIG_SIG_SIGWORK=17
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=y
-CONFIG_DISABLE_PTHREAD=y
-CONFIG_DISABLE_SIGNALS=y
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_DISABLE_ENVIRON=y
-CONFIG_DISABLE_POLL=y
-
-#
-# Misc libc settings
-#
-CONFIG_NOPRINTF_FIELDWIDTH=n
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
-
-#
-# Sizes of configurable things (0 disables)
-#
-CONFIG_MAX_TASKS=16
-CONFIG_MAX_TASK_ARGS=4
-CONFIG_NPTHREAD_KEYS=4
-CONFIG_NFILE_DESCRIPTORS=8
-CONFIG_NFILE_STREAMS=8
-CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=64
-CONFIG_NUNGET_CHARS=2
-CONFIG_PREALLOC_MQ_MSGS=4
-CONFIG_MQ_MAXMSGSIZE=32
-CONFIG_MAX_WDOGPARMS=2
-CONFIG_PREALLOC_WDOGS=4
-CONFIG_PREALLOC_TIMERS=4
-
-#
-# Filesystem configuration
-#
-CONFIG_FS_FAT=n
-CONFIG_FAT_LCNAMES=n
-CONFIG_FAT_LFN=n
-CONFIG_FAT_MAXFNAME=32
-CONFIG_FS_NXFFS=n
-CONFIG_FS_ROMFS=n
-
-#
-# Maintain legacy build behavior (revisit)
-#
-
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MTD=y
-
-#
-# SPI-based MMC/SD driver
-#
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
-
-#
-# Block driver buffering
-#
-CONFIG_FS_READAHEAD=n
-CONFIG_FS_WRITEBUFFER=n
-
-#
-# SDIO-based MMC/SD driver
-#
-CONFIG_SDIO_DMA=n
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
-
-#
-# TCP/IP and UDP support via uIP
-#
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
-
-#
-# UIP Network Utilities
-#
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
-
-#
-# USB Device Configuration
-#
-CONFIG_USBDEV=n
-CONFIG_USBDEV_ISOCHRONOUS=n
-CONFIG_USBDEV_DUALSPEED=n
-CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_REMOTEWAKEUP=n
-CONFIG_USBDEV_MAXPOWER=100
-CONFIG_USBDEV_TRACE=n
-CONFIG_USBDEV_TRACE_NRECORDS=128
-
-#
-# USB Serial Device Configuration
-#
-CONFIG_PL2303=n
-CONFIG_PL2303_EPINTIN=1
-CONFIG_PL2303_EPBULKOUT=2
-CONFIG_PL2303_EPBULKIN=3
-CONFIG_PL2303_NWRREQS=4
-CONFIG_PL2303_NRDREQS=4
-CONFIG_PL2303_VENDORID=0x067b
-CONFIG_PL2303_PRODUCTID=0x2303
-CONFIG_PL2303_VENDORSTR="Nuttx"
-CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
-CONFIG_PL2303_RXBUFSIZE=512
-CONFIG_PL2303_TXBUFSIZE=512
-
-#
-# USB Storage Device Configuration
-#
-CONFIG_USBMSC=n
-CONFIG_USBMSC_EP0MAXPACKET=64
-CONFIG_USBMSC_EPBULKOUT=2
-CONFIG_USBMSC_EPBULKIN=5
-CONFIG_USBMSC_NRDREQS=2
-CONFIG_USBMSC_NWRREQS=2
-CONFIG_USBMSC_BULKINREQLEN=256
-CONFIG_USBMSC_BULKOUTREQLEN=256
-CONFIG_USBMSC_VENDORID=0x584e
-CONFIG_USBMSC_VENDORSTR="NuttX"
-CONFIG_USBMSC_PRODUCTID=0x5342
-CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
-CONFIG_USBMSC_VERSIONNO=0x0399
-CONFIG_USBMSC_REMOVABLE=y
-
-#
-# Watchdog timer configuration
-#
-CONFIG_WATCHDOG=n
-
-#
-# Settings for examples/uip
-#
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
-
-#
-# Settings for examples/nettest
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=n
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
-
-#
-# Settings for examples/ostest
-#
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
-
-#
-# Settings for apps/nshlib
-#
-CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
-CONFIG_NSH_LINELEN=64
-CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_ARCHINIT=n
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
-
-#
-# Architecture-specific NSH options
-#
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
-
-#
-# Settings for examples/usbserial
-#
-CONFIG_EXAMPLES_USBSERIAL_INONLY=n
-CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
-
-CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
-
-#
-# Settings for examples/watchdog
-#
-# This test depends on these specific Watchdog/NSH configurations settings (your
-# specific watchdog hardware settings might require additional settings).
-#
-
-#
-# Stack and heap information
-#
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
diff --git a/configs/stm3210e-eval/RIDE/nuttx.ctx b/configs/stm3210e-eval/RIDE/nuttx.ctx
deleted file mode 100755
index eaa41d318a..0000000000
--- a/configs/stm3210e-eval/RIDE/nuttx.ctx
+++ /dev/null
@@ -1,40 +0,0 @@
-
-<Debug>
-	<FindStrings/>
-	<ReplaceStrings/>
-	<nuttx>
-		<CodeView TopRow="134220190" Focus="4294967295" />
-		<CodeView TopRow="134220190" Focus="4294967295" />
-						
-	</nuttx>
-	<Flags>
-		<Report>
-			<Def Header="FlagReport" NbCol="8" >
-				<Col Type="PT_BOOL" Header="Check" sizeCache="18" AutoSize="0" Edit="1" Sortable="1" Icon="C:\Program Files\Raisonance\Ride\config\resources\check.bmp" />
-				<Col Type="PT_STRING" Header="Kind" sizeCache="DDDDDDDDDDD" AutoSize="1" Edit="0" Sortable="1" />
-				<Col Type="PT_STRING" Header="KindID" sizeCache="DD" AutoSize="1" Edit="0" Sortable="1" Visible="0" />
-				<Col Type="PT_STRING" Header="Space" sizeCache="DDDDDD" AutoSize="1" Edit="0" Sortable="1" />
-				<Col Type="PT_STRING" Header="SpaceID" sizeCache="DD" AutoSize="0" Edit="0" Sortable="0" Visible="0" />
-				<Col Type="PT_STRING" Header="Condition" sizeCache="DDDDDDDDDDDDDDDDDDDDDDDD" AutoSize="1" Edit="0" Sortable="0" />
-				<Col Type="PT_STRING" Header="Line" sizeCache="DDDDDD" AutoSize="1" Edit="0" Sortable="1" Visible="1" />
-				<Col Type="PT_STRING" Header="Path" sizeCache="DDDDDDDDDDDDDDDDDDDD" AutoSize="1" Edit="0" Sortable="1" Visible="1" />
-							
-			</Def>
-			<Rows>
-				<Row Check="True" Kind="Breakpoint" KindID="0" Space="code" SpaceID="0" Condition="" Line="L:148" Path="C:\cygwin\home\Owner\projects\nuttx\nuttx\arch\arm\src\stm32\stm32_start.c" />
-							
-			</Rows>
-					
-		</Report>
-			
-	</Flags>
-	<Views/>
-</Debug>AutoSize="1" Edit="0" Sortable="1" Visible="1" />
-				<Col Type="PT_STRING" Header="Path" sizeCache="DDDDDDDDDDDDDDDDDDDD" AutoSize="1" Edit="0" Sortable="1" Visible="1" />
-			</Def>
-			<Rows>
-				<Row Check="True" Kind="Breakpoint" KindID="0" Space="code" SpaceID="0" Condition="" Line="L:148" Path="C:\cygwin\home\Owner\projects\nuttx\nuttx\arch\arm\src\stm32\stm32_start.c" />
-			</Rows>
-		</Report>
-	</Flags>
-</Debug>
\ No newline at end of file
diff --git a/configs/stm3210e-eval/RIDE/nuttx.dbi b/configs/stm3210e-eval/RIDE/nuttx.dbi
deleted file mode 100755
index 51748d1b0e..0000000000
--- a/configs/stm3210e-eval/RIDE/nuttx.dbi
+++ /dev/null
@@ -1,23 +0,0 @@
-[Application]
-ApplicationPath=C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\nuttx.elf
-CSX=0
-HighBankAddr=400000
-BootMode=0
-Format=ELF
-CodeOffset=0x0
-DataOffset=0x0
-LoaderTool=ARM
-Target=ARM
-DebugTool=RLINK_CORTEX
-ApplicationComponents=
-[Device]
-Name=STM32F101VET6
-[ARMSigDrv options]
-CXS=0
-[Debug]
-Explore=No
-Startup=1
-StartupSymb=main
-ToolName=RLINK_CORTEX
-[SimFile]
-path=C:\Program Files\Raisonance\Ride\sim\ARM\STM32F101VET6.sim
diff --git a/configs/stm3210e-eval/RIDE/nuttx.elf.ld b/configs/stm3210e-eval/RIDE/nuttx.elf.ld
deleted file mode 100755
index 515f91cc29..0000000000
--- a/configs/stm3210e-eval/RIDE/nuttx.elf.ld
+++ /dev/null
@@ -1,19 +0,0 @@
-
-SEARCH_DIR(".")
-SEARCH_DIR("C:\Program Files\Raisonance\Ride\Lib\ARM")
-STARTUP("C:\cygwin\home\Owner\projects\nuttx\nuttx\arch\arm\src\stm32_vectors.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\stm32_gpio.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\stm32_irq.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\stm32_lowputc.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\stm32_rcc.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\stm32_serial.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\stm32_start.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\bigfatstub.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\up_svcall.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\up_hardfault.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\up_leds.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\up_boot.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\irq_unexpectedisr.o")
-INPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\lib_memcpy.o")
-OUTPUT("C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\nuttx.elf")
-INCLUDE "C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\scripts\ld.script"
diff --git a/configs/stm3210e-eval/RIDE/nuttx.rapp b/configs/stm3210e-eval/RIDE/nuttx.rapp
deleted file mode 100755
index ce9ffc81e2..0000000000
--- a/configs/stm3210e-eval/RIDE/nuttx.rapp
+++ /dev/null
@@ -1,83 +0,0 @@
-
-<ApplicationBuild Header="nuttx" Extern=".\nuttx.rapp" Path=".\nuttx.rapp" OutputFile=".\nuttx.elf" sate="98" >
-	<NodeC Path="..\..\..\arch\arm\src\stm32\stm32_gpio.c" Header="stm32_gpio.c" Marker="-1" OutputFile=".\stm32_gpio.o" sate="0" />
-	<NodeC Path="..\..\..\arch\arm\src\stm32\stm32_irq.c" Header="stm32_irq.c" Marker="-1" OutputFile=".\stm32_irq.o" sate="0" />
-	<NodeC Path="..\..\..\arch\arm\src\stm32\stm32_lowputc.c" Header="stm32_lowputc.c" Marker="-1" OutputFile=".\stm32_lowputc.o" sate="0" />
-	<NodeC Path="..\..\..\arch\arm\src\stm32\stm32_rcc.c" Header="stm32_rcc.c" Marker="-1" OutputFile=".\stm32_rcc.o" sate="0" />
-	<NodeC Path="..\..\..\arch\arm\src\stm32\stm32_serial.c" Header="stm32_serial.c" Marker="-1" OutputFile=".\stm32_serial.o" sate="0" />
-	<NodeC Path="..\..\..\arch\arm\src\stm32\stm32_start.c" Header="stm32_start.c" Marker="-1" OutputFile=".\stm32_start.o" sate="0" />
-	<NodeC Path=".\bigfatstub.c" Header="bigfatstub.c" Marker="-1" OutputFile=".\bigfatstub.o" sate="0" />
-	<NodeC Path="..\..\..\arch\arm\src\armv7-m\up_svcall.c" Header="up_svcall.c" Marker="-1" OutputFile=".\up_svcall.o" sate="0" />
-	<NodeC Path="..\..\..\arch\arm\src\armv7-m\up_hardfault.c" Header="up_hardfault.c" Marker="-1" OutputFile=".\up_hardfault.o" sate="0" />
-	<NodeC Path="..\src\up_leds.c" Header="up_leds.c" Marker="-1" OutputFile=".\up_leds.o" sate="0" />
-	<NodeC Path="..\src\up_boot.c" Header="up_boot.c" Marker="-1" OutputFile=".\up_boot.o" sate="0" />
-	<NodeC Path="..\..\..\sched\irq_unexpectedisr.c" Header="irq_unexpectedisr.c" Marker="-1" OutputFile=".\irq_unexpectedisr.o" sate="0" />
-	<NodeC Path="..\..\..\lib\lib_memcpy.c" Header="lib_memcpy.c" Marker="-1" OutputFile=".\lib_memcpy.o" sate="0" />
-	<Options>
-		<Config Header="Standard" >
-			<Set Header="ApplicationBuild" >
-				<Section Header="General" >
-					<Property Header="TargetFamily" Value="ARM" />
-																																		
-				</Section>
-				<Section Header="Directories" >
-					<Property Header="IncDir" Value=".;C:\cygwin\home\Owner\projects\nuttx\nuttx\arch\arm\src\common;C:\cygwin\home\Owner\projects\nuttx\nuttx\arch\arm\src\armv7-m;C:\cygwin\home\Owner\projects\nuttx\nuttx\arch\arm\src\stm32;C:\cygwin\home\Owner\projects\nuttx\nuttx\include;C:\cygwin\home\Owner\projects\nuttx\nuttx\sched" Removable="1" />
-																									
-				</Section>
-																			
-			</Set>
-			<Set Header="Target" >
-				<Section Header="ProcessorARM" >
-					<Property Header="Processor" Value="STM32F101VET6" />
-																																		
-				</Section>
-				<Section Header="ToolSetARM" >
-					<Property Header="BuildToolSetARM" Value="ARM\\GNU.config" Removable="1" />
-																																		
-				</Section>
-																										
-			</Set>
-			<Set Header="AS" >
-				<Section Header="Options" >
-					<Property Header="More" Value="-D __ASSEMBLY__" />
-																									
-				</Section>
-																			
-			</Set>
-			<Set Header="LD" >
-				<Section Header="Startup" >
-					<Property Header="DEFAULTSTARTUP" Value="No" Removable="1" />
-					<Property Header="File" Value="C:\cygwin\home\Owner\projects\nuttx\nuttx\arch\arm\src\stm32_vectors.o" Removable="1" />
-																
-				</Section>
-				<Section Header="More" >
-					<Property Header="More" Value="-nostdlib" />
-							
-				</Section>
-				<Section Header="LIB" >
-					<Property Header="STLIB" Value="0" Removable="1" />
-					<Property Header="UART0PUTC" Value="0" Removable="1" />
-					<Property Header="SMALLP" Value="0" Removable="1" />
-							
-				</Section>
-				<Section Header="Scripts" >
-					<Property Header="SCRIPTFILES" Value="No" Removable="1" />
-					<Property Header="File" Value="C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\scripts\ld.script" Removable="1" />
-							
-				</Section>
-				<Section Header="Linker" >
-					<Property Header="GC_SECTIONS" Value="" Removable="1" />
-							
-				</Section>
-					
-			</Set>
-			<Set Header="GCC" >
-				<Section Header="More" >
-					<Property Header="More" Value="-nostdinc" />
-							
-				</Section>
-					
-			</Set>
-		</Config>
-	</Options>
-</ApplicationBuild>
diff --git a/configs/stm3210e-eval/RIDE/nuttx.rdb b/configs/stm3210e-eval/RIDE/nuttx.rdb
deleted file mode 100755
index db83e52db5..0000000000
Binary files a/configs/stm3210e-eval/RIDE/nuttx.rdb and /dev/null differ
diff --git a/configs/stm3210e-eval/RIDE/nuttx.rprj b/configs/stm3210e-eval/RIDE/nuttx.rprj
deleted file mode 100755
index b366ffc086..0000000000
--- a/configs/stm3210e-eval/RIDE/nuttx.rprj
+++ /dev/null
@@ -1,4 +0,0 @@
-
-<Project Header="Project 'nuttx'" Path=".\nuttx.rprj" Project="Yes" OutputFile="" sate="96" ActiveApp="nuttx" >
-	<ApplicationBuild Header="nuttx" Extern=".\nuttx.rapp" Path=".\nuttx.rapp" OutputFile=".\nuttx.elf" sate="98" />
-</Project>
\ No newline at end of file
diff --git a/configs/stm3210e-eval/RIDE/setenv.sh b/configs/stm3210e-eval/RIDE/setenv.sh
deleted file mode 100755
index 40872c164b..0000000000
--- a/configs/stm3210e-eval/RIDE/setenv.sh
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/bash
-# configs/stm3210e-eval/RIDE/setenv.sh
-#
-#   Copyright (C) 2009 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-
-if [ "$(basename $0)" = "setenv.sh" ] ; then
-  echo "You must source this script, not run it!" 1>&2
-  exit 1
-fi
-
-if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
-
-WD=`pwd`
-export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
-export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
-export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
-
-echo "PATH : ${PATH}"
diff --git a/configs/stm3210e-eval/RIDE/stm32-ld.sh b/configs/stm3210e-eval/RIDE/stm32-ld.sh
deleted file mode 100755
index d9a8bf260e..0000000000
--- a/configs/stm3210e-eval/RIDE/stm32-ld.sh
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-GNUPATH="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
-RIDEPATH="/cygdrive/c/Program Files/Raisonance/Ride/Bin"
-
-LD=arm-none-eabi-gcc.exe 
-OBJCOPY=arm-none-eabi-objcopy.exe
-REXRDR=rexrdr.exe
-SIZE=arm-none-eabi-size.exe
-DWF2XML=dwf2xml.exe
-
-SCRIPT="C:\cygwin\home\Owner\projects\nuttx\nuttx\configs\stm3210e-eval\RIDE\nuttx.elf.ld"
-LDFLAGS="-mcpu=cortex-m3 -mthumb  -u _start -Wl,-static -nostartfiles -Wl,--warn-once -nostdlib"
-
-${LD} ${LDFLAGS} -Wl,-T -Xlinker "${SCRIPT}"
-${OBJCOPY} nuttx.elf --target=ihex nuttx.hex
-${REXRDR} nuttx.elf.sizetmp 0 ${SIZE} nuttx.elf
-${DWF2XML} nuttx.dbi nuttx-globals.Standard.xml nuttx.Standard.xml ARM
diff --git a/configs/stm3210e-eval/nx/defconfig b/configs/stm3210e-eval/nx/defconfig
index 45c2f3b865..071b5067a5 100644
--- a/configs/stm3210e-eval/nx/defconfig
+++ b/configs/stm3210e-eval/nx/defconfig
@@ -196,7 +196,7 @@ CONFIG_START_DAY=5
 CONFIG_GREGORIAN_TIME=n
 CONFIG_JULIAN_TIME=n
 CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=n
+CONFIG_DEV_LOWCONSOLE=y
 CONFIG_MUTEX_TYPES=n
 CONFIG_PRIORITY_INHERITANCE=n
 CONFIG_SEM_PREALLOCHOLDERS=0
@@ -269,8 +269,8 @@ CONFIG_ARCH_BZERO=n
 CONFIG_MAX_TASKS=16
 CONFIG_MAX_TASK_ARGS=4
 CONFIG_NPTHREAD_KEYS=4
-CONFIG_NFILE_DESCRIPTORS=8
-CONFIG_NFILE_STREAMS=8
+CONFIG_NFILE_DESCRIPTORS=12
+CONFIG_NFILE_STREAMS=12
 CONFIG_NAME_MAX=32
 CONFIG_STDIO_BUFFER_SIZE=64
 CONFIG_NUNGET_CHARS=2
@@ -430,7 +430,6 @@ CONFIG_NX_KBD=y
 #CONFIG_NXTK_BORDERWIDTH=4
 CONFIG_NXTK_BORDERCOLOR1=0xd69a
 CONFIG_NXTK_BORDERCOLOR2=0xad55
-CONFIG_NXTK_AUTORAISE=n
 CONFIG_NXFONT_SANS22X29=n
 CONFIG_NXFONT_SANS23X27=y
 CONFIG_NXFONT_SANS28X37=n
diff --git a/configs/stm3210e-eval/nxlines/Make.defs b/configs/stm3210e-eval/nxlines/Make.defs
deleted file mode 100644
index 860500438c..0000000000
--- a/configs/stm3210e-eval/nxlines/Make.defs
+++ /dev/null
@@ -1,116 +0,0 @@
-############################################################################
-# configs/stm3210e-eval/nxlines/Make.defs
-#
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-include ${TOPDIR}/.config
-include ${TOPDIR}/tools/Config.mk
-include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
-
-ifeq ($(CONFIG_STM32_DFU),y)
-  LDSCRIPT = ld.script.dfu
-else
-  LDSCRIPT = ld.script
-endif
-
-ifeq ($(WINTOOL),y)
-  # Windows-native toolchains
-  DIRLINK = $(TOPDIR)/tools/copydir.sh
-  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
-  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
-  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
-  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
-else
-  # Linux/Cygwin-native toolchain 
-  MKDEP = $(TOPDIR)/tools/mkdeps.sh
-  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
-  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
-endif
-
-CC = $(CROSSDEV)gcc
-CXX = $(CROSSDEV)g++
-CPP = $(CROSSDEV)gcc -E
-LD = $(CROSSDEV)ld
-AR = $(CROSSDEV)ar rcs
-NM = $(CROSSDEV)nm
-OBJCOPY = $(CROSSDEV)objcopy
-OBJDUMP = $(CROSSDEV)objdump
-
-ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
-ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
-
-ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
-  ARCHOPTIMIZATION = -g
-endif
-
-ifneq ($(CONFIG_DEBUG_NOOPT),y)
-  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
-endif
-
-ARCHCFLAGS = -fno-builtin
-ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
-ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
-ARCHWARNINGSXX = -Wall -Wshadow
-ARCHDEFINES =
-ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
-
-CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
-CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
-CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
-CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
-CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
-AFLAGS = $(CFLAGS) -D__ASSEMBLY__
-
-NXFLATLDFLAGS1 = -r -d -warn-common
-NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
-LDNXFLATFLAGS = -e main -s 2048
-
-OBJEXT = .o
-LIBEXT = .a
-EXEEXT =
-
-ifneq ($(CROSSDEV),arm-nuttx-elf-)
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
-  LDFLAGS += -g
-endif
-
-
-HOSTCC = gcc
-HOSTINCLUDES = -I.
-HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
-HOSTLDFLAGS =
-
diff --git a/configs/stm3210e-eval/nxlines/appconfig b/configs/stm3210e-eval/nxlines/appconfig
deleted file mode 100644
index c2fc508fa8..0000000000
--- a/configs/stm3210e-eval/nxlines/appconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-############################################################################
-# configs/stm3210e-eval/nxlines/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nxlines
diff --git a/configs/stm3210e-eval/nxlines/defconfig b/configs/stm3210e-eval/nxlines/defconfig
deleted file mode 100644
index 3f006a9da0..0000000000
--- a/configs/stm3210e-eval/nxlines/defconfig
+++ /dev/null
@@ -1,628 +0,0 @@
-############################################################################
-# configs/stm3210e-eval/nxlines/defconfig
-#
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
-#
-CONFIG_ARCH="arm"
-CONFIG_ARCH_ARM=y
-CONFIG_ARCH_CORTEXM3=y
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32F103ZET6=y
-CONFIG_ARCH_BOARD="stm3210e-eval"
-CONFIG_ARCH_BOARD_STM3210E_EVAL=y
-CONFIG_BOARD_LOOPSPERMSEC=5483
-CONFIG_RAM_SIZE=65536
-CONFIG_RAM_START=0x20000000
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=y
-
-#
-# Identify toolchain and linker options
-#
-CONFIG_STM32_CODESOURCERYW=n
-CONFIG_STM32_CODESOURCERYL=n
-CONFIG_STM32_DEVKITARM=n
-CONFIG_STM32_RAISONANCE=n
-CONFIG_STM32_BUILDROOT=y
-
-#
-# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
-#
-CONFIG_STM32_DFU=y
-CONFIG_STM32_JTAG_FULL_ENABLE=y
-CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
-CONFIG_STM32_JTAG_SW_ENABLE=n
-
-#
-# Individual subsystems can be enabled:
-# AHB: 
-CONFIG_STM32_DMA1=n
-CONFIG_STM32_DMA2=y
-CONFIG_STM32_CRC=n
-CONFIG_STM32_FSMC=y
-CONFIG_STM32_SDIO=y
-# APB1:
-CONFIG_STM32_TIM2=n
-CONFIG_STM32_TIM3=n
-CONFIG_STM32_TIM4=n
-CONFIG_STM32_TIM5=n
-CONFIG_STM32_TIM6=n
-CONFIG_STM32_TIM7=n
-CONFIG_STM32_WWDG=n
-CONFIG_STM32_IWDG=n
-CONFIG_STM32_SPI2=n
-CONFIG_STM32_SPI4=n
-CONFIG_STM32_USART2=y
-CONFIG_STM32_USART3=n
-CONFIG_STM32_UART4=n
-CONFIG_STM32_UART5=n
-CONFIG_STM32_I2C1=y
-CONFIG_STM32_I2C2=n
-CONFIG_STM32_USB=y
-CONFIG_STM32_CAN1=n
-CONFIG_STM32_BKP=n
-CONFIG_STM32_PWR=n
-CONFIG_STM32_DAC=n
-# APB2:
-CONFIG_STM32_ADC1=n
-CONFIG_STM32_ADC2=n
-CONFIG_STM32_TIM1=n
-CONFIG_STM32_SPI1=n
-CONFIG_STM32_TIM8=n
-CONFIG_STM32_USART1=y
-CONFIG_STM32_ADC3=n
-
-#
-# Timer and I2C devices may need to the following to force power to be applied:
-#
-#CONFIG_STM32_FORCEPOWER=y
-
-#
-# STM32F103Z specific serial device driver settings
-#
-CONFIG_USART1_SERIAL_CONSOLE=y
-CONFIG_USART2_SERIAL_CONSOLE=n
-CONFIG_USART3_SERIAL_CONSOLE=n
-CONFIG_UART4_SERIAL_CONSOLE=n
-CONFIG_UART5_SERIAL_CONSOLE=n
-
-CONFIG_USART1_TXBUFSIZE=256
-CONFIG_USART2_TXBUFSIZE=256
-CONFIG_USART3_TXBUFSIZE=256
-CONFIG_UART4_TXBUFSIZE=256
-CONFIG_UART5_TXBUFSIZE=256
-
-CONFIG_USART1_RXBUFSIZE=256
-CONFIG_USART2_RXBUFSIZE=256
-CONFIG_USART3_RXBUFSIZE=256
-CONFIG_UART4_RXBUFSIZE=256
-CONFIG_UART5_RXBUFSIZE=256
-
-CONFIG_USART1_BAUD=115200
-CONFIG_USART2_BAUD=115200
-CONFIG_USART3_BAUD=115200
-CONFIG_UART4_BAUD=115200
-CONFIG_UART5_BAUD=115200
-
-CONFIG_USART1_BITS=8
-CONFIG_USART2_BITS=8
-CONFIG_USART3_BITS=8
-CONFIG_UART4_BITS=8
-CONFIG_UART5_BITS=8
-
-CONFIG_USART1_PARITY=0
-CONFIG_USART2_PARITY=0
-CONFIG_USART3_PARITY=0
-CONFIG_UART4_PARITY=0
-CONFIG_UART5_PARITY=0
-
-CONFIG_USART1_2STOP=0
-CONFIG_USART2_2STOP=0
-CONFIG_USART3_2STOP=0
-CONFIG_UART4_2STOP=0
-CONFIG_UART5_2STOP=0
-
-#
-# STM3210E-EVAL specific LCD settings
-#
-CONFIG_STM32_AM240320_DISABLE=n
-CONFIG_STM32_SPFD5408B_DISABLE=n
-CONFIG_STM32_R61580_DISABLE=y
-
-#
-# General build options
-#
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=y
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=n
-
-#
-# General OS setup
-#
-CONFIG_USER_ENTRYPOINT="nxlines_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_GRAPHICS=n
-CONFIG_DEBUG_LCD=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_HAVE_CXX=n
-CONFIG_HAVE_CXXINITIALIZE=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2011
-CONFIG_START_MONTH=7
-CONFIG_START_DAY=8
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
-CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=y
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SCHED_WORKQUEUE=y
-CONFIG_SCHED_WORKPRIORITY=192
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=1024
-CONFIG_SIG_SIGWORK=17
-
-#
-# Settings for NXFLAT
-#
-CONFIG_NXFLAT=n
-CONFIG_NXFLAT_DUMPBUFFER=n
-CONFIG_SYMTAB_ORDEREDBYNAME=y
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=y
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=n
-CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_DISABLE_ENVIRON=y
-CONFIG_DISABLE_POLL=y
-
-#
-# Misc libc settings
-#
-CONFIG_NOPRINTF_FIELDWIDTH=n
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
-
-#
-# Sizes of configurable things (0 disables)
-#
-CONFIG_MAX_TASKS=16
-CONFIG_MAX_TASK_ARGS=4
-CONFIG_NPTHREAD_KEYS=4
-CONFIG_NFILE_DESCRIPTORS=12
-CONFIG_NFILE_STREAMS=12
-CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=64
-CONFIG_NUNGET_CHARS=2
-CONFIG_PREALLOC_MQ_MSGS=4
-CONFIG_MQ_MAXMSGSIZE=32
-CONFIG_MAX_WDOGPARMS=2
-CONFIG_PREALLOC_WDOGS=4
-CONFIG_PREALLOC_TIMERS=4
-
-#
-# Framebuffer driver options
-#
-CONFIG_FB_CMAP=n
-CONFIG_FB_HWCURSOR=n
-CONFIG_FB_HWCURSORIMAGE=n
-#CONFIG_FB_HWCURSORSIZE
-#CONFIG_FB_TRANSPARENCY
-
-#
-# Filesystem configuration
-#
-CONFIG_FS_FAT=n
-CONFIG_FAT_LCNAMES=n
-CONFIG_FAT_LFN=n
-CONFIG_FAT_MAXFNAME=32
-CONFIG_FS_NXFFS=n
-CONFIG_FS_ROMFS=n
-
-#
-# Maintain legacy build behavior (revisit)
-#
-
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MTD=y
-
-#
-# SPI-based MMC/SD driver
-#
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
-
-#
-# Block driver buffering
-#
-CONFIG_FS_READAHEAD=n
-CONFIG_FS_WRITEBUFFER=n
-
-#
-# SDIO-based MMC/SD driver
-#
-CONFIG_SDIO_DMA=y
-CONFIG_SDIO_PREFLIGHT=y
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
-
-#
-# TCP/IP and UDP support via uIP
-#
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
-
-#
-# UIP Network Utilities
-#
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
-
-#
-# USB Device Configuration
-#
-CONFIG_USBDEV=n
-CONFIG_USBDEV_ISOCHRONOUS=n
-CONFIG_USBDEV_DUALSPEED=n
-CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_REMOTEWAKEUP=n
-CONFIG_USBDEV_MAXPOWER=100
-CONFIG_USBDEV_TRACE=n
-CONFIG_USBDEV_TRACE_NRECORDS=128
-
-#
-# USB Serial Device Configuration
-#
-CONFIG_PL2303=n
-CONFIG_PL2303_EPINTIN=1
-CONFIG_PL2303_EPBULKOUT=2
-CONFIG_PL2303_EPBULKIN=3
-CONFIG_PL2303_NWRREQS=4
-CONFIG_PL2303_NRDREQS=4
-CONFIG_PL2303_VENDORID=0x067b
-CONFIG_PL2303_PRODUCTID=0x2303
-CONFIG_PL2303_VENDORSTR="Nuttx"
-CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
-CONFIG_PL2303_RXBUFSIZE=512
-CONFIG_PL2303_TXBUFSIZE=512
-
-#
-# USB Storage Device Configuration
-#
-CONFIG_USBMSC=n
-CONFIG_USBMSC_EP0MAXPACKET=64
-CONFIG_USBMSC_EPBULKOUT=2
-CONFIG_USBMSC_EPBULKIN=5
-CONFIG_USBMSC_NRDREQS=2
-CONFIG_USBMSC_NWRREQS=2
-CONFIG_USBMSC_BULKINREQLEN=256
-CONFIG_USBMSC_BULKOUTREQLEN=256
-CONFIG_USBMSC_VENDORID=0x584e
-CONFIG_USBMSC_VENDORSTR="NuttX"
-CONFIG_USBMSC_PRODUCTID=0x5342
-CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
-CONFIG_USBMSC_VERSIONNO=0x0399
-CONFIG_USBMSC_REMOVABLE=y
-
-#
-# Watchdog timer configuration
-#
-CONFIG_WATCHDOG=n
-
-#
-# Graphics related configuration settings
-#
-CONFIG_NX=y
-CONFIG_NX_MULTIUSER=n
-CONFIG_NX_NPLANES=1
-CONFIG_NX_DISABLE_1BPP=y
-CONFIG_NX_DISABLE_2BPP=y
-CONFIG_NX_DISABLE_4BPP=y
-CONFIG_NX_DISABLE_8BPP=y
-CONFIG_NX_DISABLE_16BPP=n
-CONFIG_NX_DISABLE_24BPP=y
-CONFIG_NX_DISABLE_32BPP=y
-CONFIG_NX_PACKEDMSFIRST=n
-CONFIG_NX_LCDDRIVER=y
-CONFIG_LCD_MAXPOWER=1
-CONFIG_LCD_MAXCONTRAST=1
-CONFIG_NX_MOUSE=y
-CONFIG_NX_KBD=y
-#CONFIG_NXTK_BORDERWIDTH=4
-CONFIG_NXTK_BORDERCOLOR1=0xd69a
-CONFIG_NXTK_BORDERCOLOR2=0xad55
-CONFIG_NXFONT_SANS22X29=n
-CONFIG_NXFONT_SANS23X27=y
-CONFIG_NXFONT_SANS28X37=n
-CONFIG_NXFONT_SANS22X29B=n
-CONFIG_NXFONT_SANS28X37B=n
-CONFIG_NXFONT_SANS40X49B=n
-CONFIG_NXFONT_SERIF22X29=n
-CONFIG_NXFONT_SERIF29X37=n
-CONFIG_NXFONT_SERIF38X48=n
-CONFIG_NXFONT_SERIF22X28B=y
-CONFIG_NXFONT_SERIF27X38B=n
-CONFIG_NXFONT_SERIF38X49B=n
-CONFIG_NXFONTS_CHARBITS=7
-CONFIG_NX_BLOCKING=y
-CONFIG_NX_MXSERVERMSGS=32
-CONFIG_NX_MXCLIENTMSGS=16
-
-#
-# NxConsole Configuration Settings:
-#
-CONFIG_NXCONSOLE=n
-CONFIG_NXCONSOLE_BPP=16
-CONFIG_NXCONSOLE_MXCHARS=256
-CONFIG_NXCONSOLE_CACHESIZE=32
-#
-
-#
-# STM3210E-EVAL LCD Hardware Configuration
-#
-CONFIG_LCD_NOGETRUN=y
-CONFIG_LCD_LANDSCAPE=n
-CONFIG_LCD_PORTRAIT=n
-CONFIG_LCD_RPORTRAIT=y
-CONFIG_LCD_BACKLIGHT=n
-CONFIG_LCD_PWM=n
-
-#
-# Settings for examples/uip
-#
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
-
-#
-# Settings for examples/nettest
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=n
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
-
-#
-# Settings for examples/ostest
-#
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
-
-#
-# Settings for apps/nshlib
-#
-CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
-CONFIG_NSH_LINELEN=64
-CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_CONDEV="/dev/ttyS1"
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
-
-#
-# Architecture-specific NSH options
-#
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
-
-#
-# Settings for examples/usbserial
-#
-CONFIG_EXAMPLES_USBSERIAL_INONLY=n
-CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
-
-CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
-
-#
-# Settings for examples/nx
-#
-CONFIG_EXAMPLES_NX_VPLANE=0
-CONFIG_EXAMPLES_NX_DEVNO=0
-CONFIG_EXAMPLES_NX_BGCOLOR=0x0011
-CONFIG_EXAMPLES_NX_COLOR1=0xaedc
-CONFIG_EXAMPLES_NX_COLOR2=0xe7ff
-CONFIG_EXAMPLES_NX_TBCOLOR=0xd69a
-CONFIG_EXAMPLES_NX_FONTID=0
-CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000
-CONFIG_EXAMPLES_NX_BPP=16
-CONFIG_EXAMPLES_NX_RAWWINDOWS=n
-CONFIG_EXAMPLES_NX_STACKSIZE=2048
-CONFIG_EXAMPLES_NX_CLIENTPRIO=80
-CONFIG_EXAMPLES_NX_SERVERPRIO=120
-CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
-CONFIG_EXAMPLES_NX_EXTERNINIT=n
-
-#
-# Settings for examples/nxtext
-#
-CONFIG_EXAMPLES_NXTEXT_VPLANE=0
-CONFIG_EXAMPLES_NXTEXT_DEVNO=0
-CONFIG_EXAMPLES_NXTEXT_BGCOLOR=0x0011
-CONFIG_EXAMPLES_NXTEXT_BGFONTID=11
-CONFIG_EXAMPLES_NXTEXT_BGFONTCOLOR=0xffdf
-CONFIG_EXAMPLES_NXTEXT_PUCOLOR=0xfd20
-CONFIG_EXAMPLES_NXTEXT_PUFONTID=1
-CONFIG_EXAMPLES_NXTEXT_PUFONTCOLOR=0x001f
-CONFIG_EXAMPLES_NXTEXT_BPP=16
-CONFIG_EXAMPLES_NXTEXT_NOGETRUN=y
-CONFIG_EXAMPLES_NXTEXT_EXTERNINIT=n
-CONFIG_EXAMPLES_NXTEXT_BMCACHE=512
-CONFIG_EXAMPLES_NXTEXT_GLCACHE=16
-CONFIG_EXAMPLES_NXTEXT_STACKSIZE=2048
-CONFIG_EXAMPLES_NXTEXT_CLIENTPRIO=80
-CONFIG_EXAMPLES_NXTEXT_SERVERPRIO=120
-CONFIG_EXAMPLES_NXTEXT_NOTIFYSIGNO=4
-
-#
-# Settings for examples/nximage
-#
-CONFIG_EXAMPLES_NXIMAGE_VPLANE=0
-CONFIG_EXAMPLES_NXIMAGE_DEVNO=0
-CONFIG_EXAMPLES_NXIMAGE_BPP=16
-CONFIG_EXAMPLES_NXIMAGE_XSCALEp5=n
-CONFIG_EXAMPLES_NXIMAGE_XSCALE1p5=y
-CONFIG_EXAMPLES_NXIMAGE_XSCALE2p0=n
-CONFIG_EXAMPLES_NXIMAGE_YSCALEp5=n
-CONFIG_EXAMPLES_NXIMAGE_YSCALE1p5=y
-CONFIG_EXAMPLES_NXIMAGE_YSCALE2p0=n
-CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=n
-
-#
-# Settings for examples/nxlines
-#
-CONFIG_EXAMPLES_NXLINES_VPLANE=0
-CONFIG_EXAMPLES_NXLINES_DEVNO=0
-CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320
-CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
-CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0
-CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4
-CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0
-CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb
-CONFIG_EXAMPLES_NXLINES_BPP=16
-CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n
-
-#
-# Settings for examples/watchdog
-#
-# This test depends on these specific Watchdog/NSH configurations settings (your
-# specific watchdog hardware settings might require additional settings).
-#
-
-#
-# Stack and heap information
-#
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
diff --git a/configs/stm3210e-eval/nxlines/setenv.sh b/configs/stm3210e-eval/nxlines/setenv.sh
deleted file mode 100755
index 90e6fa05ce..0000000000
--- a/configs/stm3210e-eval/nxlines/setenv.sh
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/bin/bash
-# configs/stm3210e-eval/nxlines/setenv.sh
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-
-if [ "$_" = "$0" ] ; then
-  echo "You must source this script, not run it!"
-  exit 1
-fi
-
-WD=`pwd`
-if [ ! -x "setenv.sh" ]; then
-  echo "This script must be executed from the top-level NuttX build directory"
-  exit 1
-fi
-
-if [ -z "${PATH_ORIG}" ]; then
-  export PATH_ORIG="${PATH}"
-fi
-
-export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
-export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
-
-echo "PATH : ${PATH}"
diff --git a/configs/stm3210e-eval/nxtext/Make.defs b/configs/stm3210e-eval/nxtext/Make.defs
deleted file mode 100644
index 82696ed660..0000000000
--- a/configs/stm3210e-eval/nxtext/Make.defs
+++ /dev/null
@@ -1,116 +0,0 @@
-############################################################################
-# configs/stm3210e-eval/nxtext/Make.defs
-#
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-include ${TOPDIR}/.config
-include ${TOPDIR}/tools/Config.mk
-include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
-
-ifeq ($(CONFIG_STM32_DFU),y)
-  LDSCRIPT = ld.script.dfu
-else
-  LDSCRIPT = ld.script
-endif
-
-ifeq ($(WINTOOL),y)
-  # Windows-native toolchains
-  DIRLINK = $(TOPDIR)/tools/copydir.sh
-  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
-  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
-  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
-  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
-else
-  # Linux/Cygwin-native toolchain 
-  MKDEP = $(TOPDIR)/tools/mkdeps.sh
-  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
-  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
-endif
-
-CC = $(CROSSDEV)gcc
-CXX = $(CROSSDEV)g++
-CPP = $(CROSSDEV)gcc -E
-LD = $(CROSSDEV)ld
-AR = $(CROSSDEV)ar rcs
-NM = $(CROSSDEV)nm
-OBJCOPY = $(CROSSDEV)objcopy
-OBJDUMP = $(CROSSDEV)objdump
-
-ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
-ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
-
-ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
-  ARCHOPTIMIZATION = -g
-endif
-
-ifneq ($(CONFIG_DEBUG_NOOPT),y)
-  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
-endif
-
-ARCHCFLAGS = -fno-builtin
-ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
-ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
-ARCHWARNINGSXX = -Wall -Wshadow
-ARCHDEFINES =
-ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
-
-CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
-CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
-CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
-CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
-CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
-AFLAGS = $(CFLAGS) -D__ASSEMBLY__
-
-NXFLATLDFLAGS1 = -r -d -warn-common
-NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
-LDNXFLATFLAGS = -e main -s 2048
-
-OBJEXT = .o
-LIBEXT = .a
-EXEEXT =
-
-ifneq ($(CROSSDEV),arm-nuttx-elf-)
-  LDFLAGS += -nostartfiles -nodefaultlibs
-endif
-ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
-  LDFLAGS += -g
-endif
-
-
-HOSTCC = gcc
-HOSTINCLUDES = -I.
-HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
-HOSTLDFLAGS =
-
diff --git a/configs/stm3210e-eval/nxtext/appconfig b/configs/stm3210e-eval/nxtext/appconfig
deleted file mode 100644
index acb27582a5..0000000000
--- a/configs/stm3210e-eval/nxtext/appconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-############################################################################
-# configs/stm3210e-eval/nxtext/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nxtext
-
diff --git a/configs/stm3210e-eval/nxtext/defconfig b/configs/stm3210e-eval/nxtext/defconfig
deleted file mode 100644
index 8e7c0ddbf0..0000000000
--- a/configs/stm3210e-eval/nxtext/defconfig
+++ /dev/null
@@ -1,628 +0,0 @@
-############################################################################
-# configs/stm3210e-eval/nxtext/defconfig
-#
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
-#
-CONFIG_ARCH="arm"
-CONFIG_ARCH_ARM=y
-CONFIG_ARCH_CORTEXM3=y
-CONFIG_ARCH_CHIP="stm32"
-CONFIG_ARCH_CHIP_STM32F103ZET6=y
-CONFIG_ARCH_BOARD="stm3210e-eval"
-CONFIG_ARCH_BOARD_STM3210E_EVAL=y
-CONFIG_BOARD_LOOPSPERMSEC=5483
-CONFIG_RAM_SIZE=65536
-CONFIG_RAM_START=0x20000000
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=y
-
-#
-# Identify toolchain and linker options
-#
-CONFIG_STM32_CODESOURCERYW=y
-CONFIG_STM32_CODESOURCERYL=n
-CONFIG_STM32_DEVKITARM=n
-CONFIG_STM32_RAISONANCE=n
-CONFIG_STM32_BUILDROOT=n
-
-#
-# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
-#
-CONFIG_STM32_DFU=y
-CONFIG_STM32_JTAG_FULL_ENABLE=y
-CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
-CONFIG_STM32_JTAG_SW_ENABLE=n
-
-#
-# Individual subsystems can be enabled:
-# AHB: 
-CONFIG_STM32_DMA1=n
-CONFIG_STM32_DMA2=y
-CONFIG_STM32_CRC=n
-CONFIG_STM32_FSMC=y
-CONFIG_STM32_SDIO=y
-# APB1:
-CONFIG_STM32_TIM2=n
-CONFIG_STM32_TIM3=n
-CONFIG_STM32_TIM4=n
-CONFIG_STM32_TIM5=n
-CONFIG_STM32_TIM6=n
-CONFIG_STM32_TIM7=n
-CONFIG_STM32_WWDG=n
-CONFIG_STM32_IWDG=n
-CONFIG_STM32_SPI2=n
-CONFIG_STM32_SPI4=n
-CONFIG_STM32_USART2=y
-CONFIG_STM32_USART3=n
-CONFIG_STM32_UART4=n
-CONFIG_STM32_UART5=n
-CONFIG_STM32_I2C1=y
-CONFIG_STM32_I2C2=n
-CONFIG_STM32_USB=y
-CONFIG_STM32_CAN1=n
-CONFIG_STM32_BKP=n
-CONFIG_STM32_PWR=n
-CONFIG_STM32_DAC=n
-# APB2:
-CONFIG_STM32_ADC1=n
-CONFIG_STM32_ADC2=n
-CONFIG_STM32_TIM1=n
-CONFIG_STM32_SPI1=n
-CONFIG_STM32_TIM8=n
-CONFIG_STM32_USART1=y
-CONFIG_STM32_ADC3=n
-
-#
-# Timer and I2C devices may need to the following to force power to be applied:
-#
-#CONFIG_STM32_FORCEPOWER=y
-
-#
-# STM32F103Z specific serial device driver settings
-#
-CONFIG_USART1_SERIAL_CONSOLE=y
-CONFIG_USART2_SERIAL_CONSOLE=n
-CONFIG_USART3_SERIAL_CONSOLE=n
-CONFIG_UART4_SERIAL_CONSOLE=n
-CONFIG_UART5_SERIAL_CONSOLE=n
-
-CONFIG_USART1_TXBUFSIZE=256
-CONFIG_USART2_TXBUFSIZE=256
-CONFIG_USART3_TXBUFSIZE=256
-CONFIG_UART4_TXBUFSIZE=256
-CONFIG_UART5_TXBUFSIZE=256
-
-CONFIG_USART1_RXBUFSIZE=256
-CONFIG_USART2_RXBUFSIZE=256
-CONFIG_USART3_RXBUFSIZE=256
-CONFIG_UART4_RXBUFSIZE=256
-CONFIG_UART5_RXBUFSIZE=256
-
-CONFIG_USART1_BAUD=115200
-CONFIG_USART2_BAUD=115200
-CONFIG_USART3_BAUD=115200
-CONFIG_UART4_BAUD=115200
-CONFIG_UART5_BAUD=115200
-
-CONFIG_USART1_BITS=8
-CONFIG_USART2_BITS=8
-CONFIG_USART3_BITS=8
-CONFIG_UART4_BITS=8
-CONFIG_UART5_BITS=8
-
-CONFIG_USART1_PARITY=0
-CONFIG_USART2_PARITY=0
-CONFIG_USART3_PARITY=0
-CONFIG_UART4_PARITY=0
-CONFIG_UART5_PARITY=0
-
-CONFIG_USART1_2STOP=0
-CONFIG_USART2_2STOP=0
-CONFIG_USART3_2STOP=0
-CONFIG_UART4_2STOP=0
-CONFIG_UART5_2STOP=0
-
-#
-# STM3210E-EVAL specific LCD settings
-#
-CONFIG_STM32_AM240320_DISABLE=n
-CONFIG_STM32_SPFD5408B_DISABLE=n
-CONFIG_STM32_R61580_DISABLE=y
-
-#
-# General build options
-#
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=y
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=n
-
-#
-# General OS setup
-#
-CONFIG_USER_ENTRYPOINT="nxtext_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_GRAPHICS=n
-CONFIG_DEBUG_LCD=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_HAVE_CXX=n
-CONFIG_HAVE_CXXINITIALIZE=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2011
-CONFIG_START_MONTH=7
-CONFIG_START_DAY=8
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
-CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=y
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SCHED_WORKQUEUE=y
-CONFIG_SCHED_WORKPRIORITY=192
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=1024
-CONFIG_SIG_SIGWORK=17
-
-#
-# Settings for NXFLAT
-#
-CONFIG_NXFLAT=n
-CONFIG_NXFLAT_DUMPBUFFER=n
-CONFIG_SYMTAB_ORDEREDBYNAME=y
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=y
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=n
-CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_DISABLE_ENVIRON=y
-CONFIG_DISABLE_POLL=y
-
-#
-# Misc libc settings
-#
-CONFIG_NOPRINTF_FIELDWIDTH=n
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
-
-#
-# Sizes of configurable things (0 disables)
-#
-CONFIG_MAX_TASKS=16
-CONFIG_MAX_TASK_ARGS=4
-CONFIG_NPTHREAD_KEYS=4
-CONFIG_NFILE_DESCRIPTORS=12
-CONFIG_NFILE_STREAMS=12
-CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=64
-CONFIG_NUNGET_CHARS=2
-CONFIG_PREALLOC_MQ_MSGS=4
-CONFIG_MQ_MAXMSGSIZE=32
-CONFIG_MAX_WDOGPARMS=2
-CONFIG_PREALLOC_WDOGS=4
-CONFIG_PREALLOC_TIMERS=4
-
-#
-# Framebuffer driver options
-#
-CONFIG_FB_CMAP=n
-CONFIG_FB_HWCURSOR=n
-CONFIG_FB_HWCURSORIMAGE=n
-#CONFIG_FB_HWCURSORSIZE
-#CONFIG_FB_TRANSPARENCY
-
-#
-# Filesystem configuration
-#
-CONFIG_FS_FAT=n
-CONFIG_FAT_LCNAMES=n
-CONFIG_FAT_LFN=n
-CONFIG_FAT_MAXFNAME=32
-CONFIG_FS_NXFFS=n
-CONFIG_FS_ROMFS=n
-
-#
-# Maintain legacy build behavior (revisit)
-#
-
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MTD=y
-
-#
-# SPI-based MMC/SD driver
-#
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
-
-#
-# Block driver buffering
-#
-CONFIG_FS_READAHEAD=n
-CONFIG_FS_WRITEBUFFER=n
-
-#
-# SDIO-based MMC/SD driver
-#
-CONFIG_SDIO_DMA=y
-CONFIG_SDIO_PREFLIGHT=y
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
-
-#
-# TCP/IP and UDP support via uIP
-#
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
-
-#
-# UIP Network Utilities
-#
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
-
-#
-# USB Device Configuration
-#
-CONFIG_USBDEV=n
-CONFIG_USBDEV_ISOCHRONOUS=n
-CONFIG_USBDEV_DUALSPEED=n
-CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_REMOTEWAKEUP=n
-CONFIG_USBDEV_MAXPOWER=100
-CONFIG_USBDEV_TRACE=n
-CONFIG_USBDEV_TRACE_NRECORDS=128
-
-#
-# USB Serial Device Configuration
-#
-CONFIG_PL2303=n
-CONFIG_PL2303_EPINTIN=1
-CONFIG_PL2303_EPBULKOUT=2
-CONFIG_PL2303_EPBULKIN=3
-CONFIG_PL2303_NWRREQS=4
-CONFIG_PL2303_NRDREQS=4
-CONFIG_PL2303_VENDORID=0x067b
-CONFIG_PL2303_PRODUCTID=0x2303
-CONFIG_PL2303_VENDORSTR="Nuttx"
-CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
-CONFIG_PL2303_RXBUFSIZE=512
-CONFIG_PL2303_TXBUFSIZE=512
-
-#
-# USB Storage Device Configuration
-#
-CONFIG_USBMSC=n
-CONFIG_USBMSC_EP0MAXPACKET=64
-CONFIG_USBMSC_EPBULKOUT=2
-CONFIG_USBMSC_EPBULKIN=5
-CONFIG_USBMSC_NRDREQS=2
-CONFIG_USBMSC_NWRREQS=2
-CONFIG_USBMSC_BULKINREQLEN=256
-CONFIG_USBMSC_BULKOUTREQLEN=256
-CONFIG_USBMSC_VENDORID=0x584e
-CONFIG_USBMSC_VENDORSTR="NuttX"
-CONFIG_USBMSC_PRODUCTID=0x5342
-CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
-CONFIG_USBMSC_VERSIONNO=0x0399
-CONFIG_USBMSC_REMOVABLE=y
-
-#
-# Watchdog timer configuration
-#
-CONFIG_WATCHDOG=n
-
-#
-# Graphics related configuration settings
-#
-CONFIG_NX=y
-CONFIG_NX_MULTIUSER=n
-CONFIG_NX_NPLANES=1
-CONFIG_NX_DISABLE_1BPP=y
-CONFIG_NX_DISABLE_2BPP=y
-CONFIG_NX_DISABLE_4BPP=y
-CONFIG_NX_DISABLE_8BPP=y
-CONFIG_NX_DISABLE_16BPP=n
-CONFIG_NX_DISABLE_24BPP=y
-CONFIG_NX_DISABLE_32BPP=y
-CONFIG_NX_PACKEDMSFIRST=n
-CONFIG_NX_LCDDRIVER=y
-CONFIG_LCD_MAXPOWER=1
-CONFIG_LCD_MAXCONTRAST=1
-CONFIG_NX_MOUSE=y
-CONFIG_NX_KBD=y
-#CONFIG_NXTK_BORDERWIDTH=4
-CONFIG_NXTK_BORDERCOLOR1=0xd69a
-CONFIG_NXTK_BORDERCOLOR2=0xad55
-CONFIG_NXFONT_SANS22X29=n
-CONFIG_NXFONT_SANS23X27=y
-CONFIG_NXFONT_SANS28X37=n
-CONFIG_NXFONT_SANS22X29B=n
-CONFIG_NXFONT_SANS28X37B=n
-CONFIG_NXFONT_SANS40X49B=n
-CONFIG_NXFONT_SERIF22X29=n
-CONFIG_NXFONT_SERIF29X37=n
-CONFIG_NXFONT_SERIF38X48=n
-CONFIG_NXFONT_SERIF22X28B=y
-CONFIG_NXFONT_SERIF27X38B=n
-CONFIG_NXFONT_SERIF38X49B=n
-CONFIG_NXFONTS_CHARBITS=7
-CONFIG_NX_BLOCKING=y
-CONFIG_NX_MXSERVERMSGS=32
-CONFIG_NX_MXCLIENTMSGS=16
-
-#
-# NxConsole Configuration Settings:
-#
-CONFIG_NXCONSOLE=n
-CONFIG_NXCONSOLE_BPP=16
-CONFIG_NXCONSOLE_MXCHARS=256
-CONFIG_NXCONSOLE_CACHESIZE=32
-#
-
-#
-# STM3210E-EVAL LCD Hardware Configuration
-#
-CONFIG_LCD_NOGETRUN=y
-CONFIG_LCD_LANDSCAPE=n
-CONFIG_LCD_PORTRAIT=n
-CONFIG_LCD_RPORTRAIT=y
-CONFIG_LCD_BACKLIGHT=n
-CONFIG_LCD_PWM=n
-
-#
-# Settings for examples/uip
-#
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
-
-#
-# Settings for examples/nettest
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=n
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
-
-#
-# Settings for examples/ostest
-#
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
-
-#
-# Settings for apps/nshlib
-#
-CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
-CONFIG_NSH_LINELEN=64
-CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_CONDEV="/dev/ttyS1"
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_ARCHINIT=y
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
-
-#
-# Architecture-specific NSH options
-#
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
-
-#
-# Settings for examples/usbserial
-#
-CONFIG_EXAMPLES_USBSERIAL_INONLY=n
-CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
-
-CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
-
-#
-# Settings for examples/nx
-#
-CONFIG_EXAMPLES_NX_VPLANE=0
-CONFIG_EXAMPLES_NX_DEVNO=0
-CONFIG_EXAMPLES_NX_BGCOLOR=0x0011
-CONFIG_EXAMPLES_NX_COLOR1=0xaedc
-CONFIG_EXAMPLES_NX_COLOR2=0xe7ff
-CONFIG_EXAMPLES_NX_TBCOLOR=0xd69a
-CONFIG_EXAMPLES_NX_FONTID=0
-CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000
-CONFIG_EXAMPLES_NX_BPP=16
-CONFIG_EXAMPLES_NX_RAWWINDOWS=n
-CONFIG_EXAMPLES_NX_STACKSIZE=2048
-CONFIG_EXAMPLES_NX_CLIENTPRIO=80
-CONFIG_EXAMPLES_NX_SERVERPRIO=120
-CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
-CONFIG_EXAMPLES_NX_EXTERNINIT=n
-
-#
-# Settings for examples/nxtext
-#
-CONFIG_EXAMPLES_NXTEXT_VPLANE=0
-CONFIG_EXAMPLES_NXTEXT_DEVNO=0
-CONFIG_EXAMPLES_NXTEXT_BGCOLOR=0x0011
-CONFIG_EXAMPLES_NXTEXT_BGFONTID=11
-CONFIG_EXAMPLES_NXTEXT_BGFONTCOLOR=0xffdf
-CONFIG_EXAMPLES_NXTEXT_PUCOLOR=0xfd20
-CONFIG_EXAMPLES_NXTEXT_PUFONTID=1
-CONFIG_EXAMPLES_NXTEXT_PUFONTCOLOR=0x001f
-CONFIG_EXAMPLES_NXTEXT_BPP=16
-CONFIG_EXAMPLES_NXTEXT_NOGETRUN=y
-CONFIG_EXAMPLES_NXTEXT_EXTERNINIT=n
-CONFIG_EXAMPLES_NXTEXT_BMCACHE=512
-CONFIG_EXAMPLES_NXTEXT_GLCACHE=16
-CONFIG_EXAMPLES_NXTEXT_STACKSIZE=2048
-CONFIG_EXAMPLES_NXTEXT_CLIENTPRIO=80
-CONFIG_EXAMPLES_NXTEXT_SERVERPRIO=120
-CONFIG_EXAMPLES_NXTEXT_NOTIFYSIGNO=4
-
-#
-# Settings for examples/nximage
-#
-CONFIG_EXAMPLES_NXIMAGE_VPLANE=0
-CONFIG_EXAMPLES_NXIMAGE_DEVNO=0
-CONFIG_EXAMPLES_NXIMAGE_BPP=16
-CONFIG_EXAMPLES_NXIMAGE_XSCALEp5=n
-CONFIG_EXAMPLES_NXIMAGE_XSCALE1p5=y
-CONFIG_EXAMPLES_NXIMAGE_XSCALE2p0=n
-CONFIG_EXAMPLES_NXIMAGE_YSCALEp5=n
-CONFIG_EXAMPLES_NXIMAGE_YSCALE1p5=y
-CONFIG_EXAMPLES_NXIMAGE_YSCALE2p0=n
-CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=n
-
-#
-# Settings for examples/nxlines
-#
-CONFIG_EXAMPLES_NXLINES_VPLANE=0
-CONFIG_EXAMPLES_NXLINES_DEVNO=0
-CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320
-CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
-CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0
-CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4
-CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0
-CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb
-CONFIG_EXAMPLES_NXLINES_BPP=16
-CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n
-
-#
-# Settings for examples/watchdog
-#
-# This test depends on these specific Watchdog/NSH configurations settings (your
-# specific watchdog hardware settings might require additional settings).
-#
-
-#
-# Stack and heap information
-#
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
diff --git a/configs/stm3210e-eval/nxtext/setenv.sh b/configs/stm3210e-eval/nxtext/setenv.sh
deleted file mode 100755
index 0f3d387f59..0000000000
--- a/configs/stm3210e-eval/nxtext/setenv.sh
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/bash
-# configs/stm3210e-eval/nxtext/setenv.sh
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-
-if [ "$_" = "$0" ] ; then
-  echo "You must source this script, not run it!" 1>&2
-  exit 1
-fi
-
-WD=`pwd`
-if [ ! -x "setenv.sh" ]; then
-  echo "This script must be executed from the top-level NuttX build directory"
-  exit 1
-fi
-
-if [ -z "${PATH_ORIG}" ]; then
-  export PATH_ORIG="${PATH}"
-fi
-
-# This is the Cygwin path to the location where I installed the CodeSourcery
-# toolchain under windows.  You will also have to edit this if you install
-# the CodeSourcery toolchain in any other location
-export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
-
-# This is the Cygwin path to the location where I build the buildroot
-# toolchain.
-#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
-
-# Add the path to the toolchain to the PATH varialble
-export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
-
-echo "PATH : ${PATH}"