Change the way to configure quadrature encoder prescalers.
This commit is contained in:
Sebastien Lorquet
parent
ac1bb127b6
commit
a9c66683f2
@ -2807,11 +2807,12 @@ config STM32L4_TIM1_QE
|
||||
|
||||
if STM32L4_TIM1_QE
|
||||
|
||||
config STM32L4_TIM1_QECLKOUT
|
||||
int "TIM1 output clock"
|
||||
default 2800000
|
||||
config STM32L4_TIM1_QEPSC
|
||||
int "TIM1 pulse prescaler"
|
||||
default 1
|
||||
---help---
|
||||
The output clock of TIM1.
|
||||
This prescaler divides the number of recorded encoder pulses, limiting the count rate at the expense of resolution.
|
||||
Replaces the obscure "output clock of TIM1." (CONFIG_TIM1_QECLKOUT).
|
||||
|
||||
endif
|
||||
|
||||
@ -2824,11 +2825,12 @@ config STM32L4_TIM2_QE
|
||||
|
||||
if STM32L4_TIM2_QE
|
||||
|
||||
config STM32L4_TIM2_QECLKOUT
|
||||
int "TIM2 output clock"
|
||||
default 2800000
|
||||
config STM32L4_TIM2_QEPSC
|
||||
int "TIM2 pulse prescaler"
|
||||
default 1
|
||||
---help---
|
||||
The output clock of TIM2.
|
||||
This prescaler divides the number of recorded encoder pulses, limiting the count rate at the expense of resolution.
|
||||
Replaces the obscure "output clock of TIM2." (CONFIG_TIM2_QECLKOUT).
|
||||
|
||||
endif
|
||||
|
||||
@ -2841,11 +2843,12 @@ config STM32L4_TIM3_QE
|
||||
|
||||
if STM32L4_TIM3_QE
|
||||
|
||||
config STM32L4_TIM3_QECLKOUT
|
||||
int "TIM3 output clock"
|
||||
default 2800000
|
||||
config STM32L4_TIM3_QEPSC
|
||||
int "TIM3 pulse prescaler"
|
||||
default 1
|
||||
---help---
|
||||
The output clock of TIM3.
|
||||
This prescaler divides the number of recorded encoder pulses, limiting the count rate at the expense of resolution.
|
||||
Replaces the obscure "output clock of TIM3." (CONFIG_TIM3_QECLKOUT).
|
||||
|
||||
endif
|
||||
|
||||
@ -2858,11 +2861,12 @@ config STM32L4_TIM4_QE
|
||||
|
||||
if STM32L4_TIM4_QE
|
||||
|
||||
config STM32L4_TIM4_QECLKOUT
|
||||
int "TIM4 output clock"
|
||||
default 2800000
|
||||
config STM32L4_TIM4_QEPSC
|
||||
int "TIM4 pulse prescaler"
|
||||
default 1
|
||||
---help---
|
||||
The output clock of TIM4.
|
||||
This prescaler divides the number of recorded encoder pulses, limiting the count rate at the expense of resolution.
|
||||
Replaces the obscure "output clock of TIM4." (CONFIG_TIM4_QECLKOUT).
|
||||
|
||||
endif
|
||||
|
||||
@ -2875,11 +2879,12 @@ config STM32L4_TIM5_QE
|
||||
|
||||
if STM32L4_TIM5_QE
|
||||
|
||||
config STM32L4_TIM5_QECLKOUT
|
||||
int "TIM5 output clock"
|
||||
default 2800000
|
||||
config STM32L4_TIM5_QEPSC
|
||||
int "TIM5 pulse prescaler"
|
||||
default 1
|
||||
---help---
|
||||
The output clock of TIM5.
|
||||
This prescaler divides the number of recorded encoder pulses, limiting the count rate at the expense of resolution.
|
||||
Replaces the obscure "output clock of TIM5." (CONFIG_TIM5_QECLKOUT).
|
||||
|
||||
endif
|
||||
|
||||
@ -2892,11 +2897,12 @@ config STM32L4_TIM8_QE
|
||||
|
||||
if STM32L4_TIM8_QE
|
||||
|
||||
config STM32L4_TIM8_QECLKOUT
|
||||
int "TIM8 output clock"
|
||||
default 2800000
|
||||
config STM32L4_TIM8_QEPSC
|
||||
int "TIM8 pulse prescaler"
|
||||
default 1
|
||||
---help---
|
||||
The output clock of TIM8.
|
||||
This prescaler divides the number of recorded encoder pulses, limiting the count rate at the expense of resolution.
|
||||
Replaces the obscure "output clock of TIM8." (CONFIG_TIM8_QECLKOUT).
|
||||
|
||||
endif
|
||||
|
||||
|
||||
@ -66,31 +66,6 @@
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
/* Clocking *************************************************************************/
|
||||
/* The CLKOUT value should not exceed the CLKIN value */
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM1_QE) && CONFIG_STM32L4_TIM1_QECLKOUT > STM32L4_APB2_TIM1_CLKIN
|
||||
# warning "CONFIG_STM32L4_TIM1_QECLKOUT exceeds STM32L4_APB2_TIM1_CLKIN"
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM2_QE) && CONFIG_STM32L4_TIM2_QECLKOUT > STM32L4_APB1_TIM2_CLKIN
|
||||
# warning "CONFIG_STM32L4_TIM2_QECLKOUT exceeds STM32L4_APB2_TIM2_CLKIN"
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM3_QE) && CONFIG_STM32L4_TIM3_QECLKOUT > STM32L4_APB1_TIM3_CLKIN
|
||||
# warning "CONFIG_STM32L4_TIM3_QECLKOUT exceeds STM32L4_APB2_TIM3_CLKIN"
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM4_QE) && CONFIG_STM32L4_TIM4_QECLKOUT > STM32L4_APB1_TIM4_CLKIN
|
||||
# warning "CONFIG_STM32L4_TIM4_QECLKOUT exceeds STM32L4_APB2_TIM4_CLKIN"
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM5_QE) && CONFIG_STM32L4_TIM5_QECLKOUT > STM32L4_APB1_TIM5_CLKIN
|
||||
# warning "CONFIG_STM32L4_TIM5_QECLKOUT exceeds STM32L4_APB2_TIM5_CLKIN"
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM8_QE) && CONFIG_STM32L4_TIM8_QECLKOUT > STM32L4_APB2_TIM8_CLKIN
|
||||
# warning "CONFIG_STM32L4_TIM8_QECLKOUT exceeds STM32L4_APB2_TIM8_CLKIN"
|
||||
#endif
|
||||
|
||||
/* Timers ***************************************************************************/
|
||||
|
||||
@ -223,7 +198,7 @@ struct stm32l4_qeconfig_s
|
||||
uint32_t ti1cfg; /* TI1 input pin configuration (20-bit encoding) */
|
||||
uint32_t ti2cfg; /* TI2 input pin configuration (20-bit encoding) */
|
||||
uint32_t base; /* Register base address */
|
||||
uint32_t psc; /* Timer input clock prescaler */
|
||||
uint32_t psc; /* Encoder pulses prescaler */
|
||||
xcpt_t handler; /* Interrupt handler for this IRQ */
|
||||
};
|
||||
|
||||
@ -323,7 +298,7 @@ static const struct stm32l4_qeconfig_s g_tim1config =
|
||||
.width = TIM1_BITWIDTH,
|
||||
#endif
|
||||
.base = STM32L4_TIM1_BASE,
|
||||
.psc = (STM32L4_APB2_TIM1_CLKIN / CONFIG_STM32L4_TIM1_QECLKOUT) - 1,
|
||||
.psc = CONFIG_STM32L4_TIM1_QEPSC,
|
||||
.ti1cfg = GPIO_TIM1_CH1IN,
|
||||
.ti2cfg = GPIO_TIM1_CH2IN,
|
||||
#if TIM1_BITWIDTH == 16
|
||||
@ -349,7 +324,7 @@ static const struct stm32l4_qeconfig_s g_tim2config =
|
||||
.width = TIM2_BITWIDTH,
|
||||
#endif
|
||||
.base = STM32L4_TIM2_BASE,
|
||||
.psc = (STM32L4_APB1_TIM2_CLKIN / CONFIG_STM32L4_TIM2_QECLKOUT) - 1,
|
||||
.psc = CONFIG_STM32L4_TIM2_QEPSC,
|
||||
.ti1cfg = GPIO_TIM2_CH1IN,
|
||||
.ti2cfg = GPIO_TIM2_CH2IN,
|
||||
#if TIM2_BITWIDTH == 16
|
||||
@ -375,7 +350,7 @@ static const struct stm32l4_qeconfig_s g_tim3config =
|
||||
.width = TIM3_BITWIDTH,
|
||||
#endif
|
||||
.base = STM32L4_TIM3_BASE,
|
||||
.psc = (STM32L4_APB1_TIM3_CLKIN / CONFIG_STM32L4_TIM3_QECLKOUT) - 1,
|
||||
.psc = CONFIG_STM32L4_TIM3_QEPSC,
|
||||
.ti1cfg = GPIO_TIM3_CH1IN,
|
||||
.ti2cfg = GPIO_TIM3_CH2IN,
|
||||
#if TIM3_BITWIDTH == 16
|
||||
@ -401,7 +376,7 @@ static const struct stm32l4_qeconfig_s g_tim4config =
|
||||
.width = TIM4_BITWIDTH,
|
||||
#endif
|
||||
.base = STM32L4_TIM4_BASE,
|
||||
.psc = (STM32L4_APB1_TIM4_CLKIN / CONFIG_STM32L4_TIM4_QECLKOUT) - 1,
|
||||
.psc = CONFIG_STM32L4_TIM4_QEPSC,
|
||||
.ti1cfg = GPIO_TIM4_CH1IN,
|
||||
.ti2cfg = GPIO_TIM4_CH2IN,
|
||||
#if TIM4_BITWIDTH == 16
|
||||
@ -427,7 +402,7 @@ static const struct stm32l4_qeconfig_s g_tim5config =
|
||||
.width = TIM5_BITWIDTH,
|
||||
#endif
|
||||
.base = STM32L4_TIM5_BASE,
|
||||
.psc = (STM32L4_APB1_TIM5_CLKIN / CONFIG_STM32L4_TIM5_QECLKOUT) - 1,
|
||||
.psc = CONFIG_STM32L4_TI55_QEPSC,
|
||||
.ti1cfg = GPIO_TIM5_CH1IN,
|
||||
.ti2cfg = GPIO_TIM5_CH2IN,
|
||||
#if TIM5_BITWIDTH == 16
|
||||
@ -453,7 +428,7 @@ static const struct stm32l4_qeconfig_s g_tim8config =
|
||||
.width = TIM8_BITWIDTH,
|
||||
#endif
|
||||
.base = STM32L4_TIM8_BASE,
|
||||
.psc = (STM32L4_APB2_TIM8_CLKIN / CONFIG_STM32L4_TIM8_QECLKOUT) - 1,
|
||||
.psc = CONFIG_STM32L4_TIM8_QEPSC,
|
||||
.ti1cfg = GPIO_TIM8_CH1IN,
|
||||
.ti2cfg = GPIO_TIM8_CH2IN,
|
||||
#if TIM8_BITWIDTH == 16
|
||||
@ -804,10 +779,23 @@ static int stm32l4_setup(FAR struct qe_lowerhalf_s *lower)
|
||||
stm32l4_putreg16(priv, STM32L4_GTIM_ARR_OFFSET, 0xffff);
|
||||
#endif
|
||||
|
||||
/* Set the timer prescaler value. The clock input value (CLKIN) is based on the
|
||||
* peripheral clock (PCLK) and a multiplier. These CLKIN values are provided in
|
||||
* the board.h file. The prescaler value is then that CLKIN value divided by the
|
||||
* configured CLKOUT value (minus one)
|
||||
/* Set the timer prescaler value.
|
||||
*
|
||||
* Previously, and still in the stm32fx driver, the clock input value (CLKIN)
|
||||
* was based on the peripheral clock (PCLK) and a multiplier.
|
||||
* These CLKIN values are provided in the board.h file.
|
||||
* The prescaler value is then that CLKIN value divided by the configured
|
||||
* CLKOUT value (minus one).
|
||||
*
|
||||
* It was determined that this configration makes no sense for a qencoder.
|
||||
* If we are doing precise shaft positioning, each qe pulse is important.
|
||||
* So the STM32L4 has direct config control on the pulse count prescaler,
|
||||
* instead of deriving this value from an obscure "output"setting AND the
|
||||
* timer input clock. This input clock just limits the incoming pulse rate,
|
||||
* which should be lower than the peripheral clock due to resynchronization,
|
||||
* but it is the responsibility of the system designer to decide the
|
||||
* correct prescaler value, because it has a direct influence on the
|
||||
* encoder resolution.
|
||||
*/
|
||||
|
||||
stm32l4_putreg16(priv, STM32L4_GTIM_PSC_OFFSET, (uint16_t)priv->config->psc);
|
||||
@ -1184,6 +1172,8 @@ static int stm32l4_ioctl(FAR struct qe_lowerhalf_s *lower, int cmd, unsigned lon
|
||||
{
|
||||
/* No ioctl commands supported */
|
||||
|
||||
/* TODO add an IOCTL to control the encoder pulse count prescaler */
|
||||
|
||||
return -ENOTTY;
|
||||
}
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user