Add logic to measure AVR stack usage

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3722 42af7a65-404d-4744-a932-0658087f49c3

arch/avr/src/at90usb/Make.defs

@@ -58,6 +58,10 @@ ifeq ($(CONFIG_AVR_SPI),y)
 CMN_CSRCS	+= up_spi.c
 endif
 
+ifeq ($(CONFIG_DEBUG_STACK),y)
+CMN_CSRCS	+= up_checkstack.c
+endif
+
 # Required AT90USB files
 
 CHIP_ASRCS	= at90usb_exceptions.S

arch/avr/src/at90usb/at90usb_exceptions.S

@@ -148,7 +148,7 @@ excpt_common:
 	 breq	.Lnoswitch
 
 	/* A context switch has occurred, jump to up_fullcontextrestore with r24, r25
-	 * equal to the address of the new register save ared.
+	 * equal to the address of the new register save area.
 	 */
 
 	jmp	up_fullcontextrestore

arch/avr/src/at90usb/at90usb_lowinit.c

@@ -101,9 +101,7 @@
 
 static inline void up_wdtinit(void)
 {
-#ifndef CONFIG_AVR_WDT
+#ifdef CONFIG_AVR_WDT
-  wdt_disable();
-#else
   wdt_enable(WDTO_VALUE);
 #endif
 }
@@ -124,14 +122,18 @@ static inline void up_wdtinit(void)
 
 void up_lowinit(void)
 {
-  /* Initialize the watchdog timer */
+  /* Disable the watchdog timer */
 
-  up_wdtinit();
+  wdt_disable();
 
   /* Set the system clock divider to 1 */
 
   clock_prescale_set(clock_div_1);
 
+  /* Initialize the watchdog timer */
+
+  up_wdtinit();
+
   /* Initialize a console (probably a serial console) */
 
   up_consoleinit();

arch/avr/src/atmega/Make.defs

@@ -58,6 +58,10 @@ ifeq ($(CONFIG_AVR_SPI),y)
 CMN_CSRCS	+= up_spi.c
 endif
 
+ifeq ($(CONFIG_DEBUG_STACK),y)
+CMN_CSRCS	+= up_checkstack.c
+endif
+
 # Required ATMEGA files
 
 CHIP_ASRCS	= atmega_exceptions.S

arch/avr/src/atmega/atmega_lowinit.c

@@ -101,9 +101,7 @@
 
 static inline void up_wdtinit(void)
 {
-#ifndef CONFIG_AVR_WDT
+#ifdef CONFIG_AVR_WDT
-  wdt_disable();
-#else
   wdt_enable(WDTO_VALUE);
 #endif
 }
@@ -124,14 +122,18 @@ static inline void up_wdtinit(void)
 
 void up_lowinit(void)
 {
-  /* Initialize the watchdog timer */
+  /* Disable the watchdog timer */
 
-  up_wdtinit();
+  wdt_disable();
 
   /* Set the system clock divider to 1 */
 
   clock_prescale_set(clock_div_1);
 
+  /* Initialize the watchdog timer */
+
+  up_wdtinit();
+
   /* Initialize a console (probably a serial console) */
 
   up_consoleinit();

arch/avr/src/avr/avr_internal.h

@@ -41,6 +41,7 @@
  ****************************************************************************/
 
 #ifndef __ASSEMBLY__
+#  include <sys/types.h>
 #  include <stdint.h>
 #  include <stdbool.h>
 #endif
@@ -102,16 +103,6 @@ extern uint16_t g_heapbase;
 
 extern void up_copystate(uint8_t *dest, uint8_t *src);
 
-/************************************************************************************
- * Name:  up_saveusercontext
- *
- * Description:
- *   Save the register context of the currently executing (user) thread.
- *
- ************************************************************************************/
-
-extern int  up_saveusercontext(uint8_t *saveregs);
-
 /************************************************************************************
  * Name:  up_fullcontextrestore
  *
@@ -181,6 +172,26 @@ extern int avr_spicmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool
 #endif
 #endif
 
+/****************************************************************************
+ * Name: up_check_stack
+ *
+ * Description:
+ *   Determine (approximately) how much stack has been used be searching the
+ *   stack memory for a high water mark.  That is, the deepest level of the
+ *   stack that clobbered some recognizable marker in the stack memory.
+ *
+ * Input Parameters:
+ *   None
+ *
+ * Returned value:
+ *   The estimated amount of stack space used.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_STACK)
+extern size_t up_check_stack(void);
+#endif
+
 #endif /* __ASSEMBLY__ */
 #endif  /* __ARCH_AVR_SRC_AVR_AVR_INTERNAL_H */
 

arch/avr/src/avr/excptmacros.h

@@ -209,12 +209,16 @@
 	push	r27
 
 	/* Finally, save the stack pointer.  BUT we want the value of the stack pointer as
-	 * it was on entry into this macro.  We'll have to subtract to get that value.
+	 * it was just BEFORE the exception.  We'll have to add to get that value.
+     * The value to add is the size of the register save area including the bytes
+     * pushed by the interrupt handler (2), by the HANDLER macro (1), and the 32
+     * registers pushed above.  That is, the entire size of the register save structure
+     * MINUS two bytes for the stack pointer which has not yet been saved.
 	 */
 
 	in		r26, _SFR_IO_ADDR(SPL)
 	in		r27, _SFR_IO_ADDR(SPH)
-	adiw	r26, XCPTCONTEXT_REGS
+	adiw	r26, XCPTCONTEXT_REGS-2
 
 	push	r26				/* SPL then SPH */
 	push	r27

arch/avr/src/avr/up_checkstack.c

@@ -0,0 +1,141 @@
+/****************************************************************************
+ * arch/avr/src/avr/up_checkstack.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <sched.h>
+#include <debug.h>
+
+#include <nuttx/arch.h> 
+
+#include "os_internal.h"
+
+#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_STACK)
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Global Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_check_stack
+ *
+ * Description:
+ *   Determine (approximately) how much stack has been used be searching the
+ *   stack memory for a high water mark.  That is, the deepest level of the
+ *   stack that clobbered some recognizable marker in the stack memory.
+ *
+ * Input Parameters:
+ *   None
+ *
+ * Returned value:
+ *   The estimated amount of stack space used.
+ *
+ ****************************************************************************/
+
+size_t up_check_tcbstack(FAR _TCB *tcb)
+{
+  FAR uint8_t *ptr;
+  size_t mark;
+  int i, j;
+
+  /* The AVR uses a push-down stack:  the stack grows toward lower addresses
+   * in memory.  We need to start at the lowest address in the stack memory
+   * allocation and search to higher addresses.  The first byte we encounter
+   * that does not have the magic value is the high water mark.
+   */
+
+  for (ptr = (FAR uint8_t *)tcb->stack_alloc_ptr, mark = tcb->adj_stack_size;
+       *ptr == 0xaa && mark > 0;
+       ptr++, mark--);
+
+  /* If the stack is completely used, then this might mean that the stack
+   * overflowed from above (meaning that the stack is too small), or may
+   * have been overwritten from below meaning that some other stack or data
+   * structure overflowed.
+   *
+   * If you see returned values saying that the entire stack is being used
+   * then enable the following logic to see it there are unused areas in the
+   * middle of the stack.
+   */
+
+#if 0
+  if (mark + 16 > tcb->adj_stack_size)
+    {
+      ptr = (FAR uint8_t *)tcb->stack_alloc_ptr;
+      for (i = 0; i < tcb->adj_stack_size; i += 64)
+        {
+          for (j = 0; j < 64; j++)
+            {
+              int ch;
+              if (*ptr++ == 0xaa)
+                {
+                  ch = '.';
+                }
+              else
+                {
+                  ch = 'X';
+                }
+              up_putc(ch);
+             }
+          up_putc('\n');
+        }
+     }
+#endif
+
+  /* Return our guess about how much stack space was used */
+
+  return mark;
+}
+
+size_t up_check_stack(void)
+{
+  return up_check_tcbstack((FAR _TCB*)g_readytorun.head);
+}
+
+#endif /* CONFIG_DEBUG && CONFIG_DEBUG_STACK */

arch/avr/src/avr/up_createstack.c

@@ -43,6 +43,7 @@
 #include <sys/types.h>
 #include <stdint.h>
 #include <stdlib.h>
+#include <string.h>
 #include <sched.h>
 #include <debug.h>
 
@@ -88,26 +89,45 @@
 
 int up_create_stack(_TCB *tcb, size_t stack_size)
 {
-  if (tcb->stack_alloc_ptr &&
+  /* Is there already a stack allocated of a different size? */
-      tcb->adj_stack_size != stack_size)
+
+  if (tcb->stack_alloc_ptr && tcb->adj_stack_size != stack_size)
     {
+      /* Yes.. free it */
+
       sched_free(tcb->stack_alloc_ptr);
       tcb->stack_alloc_ptr = NULL;
     }
 
+   /* Do we need to allocate a stack? */
+ 
    if (!tcb->stack_alloc_ptr)
      {
-#ifdef CONFIG_DEBUG
+       /* Allocate the stack.  If DEBUG is enabled (but not stack debug),
+        * then create a zeroed stack to make stack dumps easier to trace.
+        */
+
+#if defined(CONFIG_DEBUG) && !defined(CONFIG_DEBUG_STACK)
        tcb->stack_alloc_ptr = (FAR void *)zalloc(stack_size);
 #else
        tcb->stack_alloc_ptr = (FAR void *)malloc(stack_size);
 #endif
      }
 
+   /* Did we successfully allocate a stack? */
+
    if (tcb->stack_alloc_ptr)
      {
        size_t top_of_stack;
-       size_t size_of_stack;
+
+       /* Yes.. If stack debug is enabled, then fill the stack with a
+        * recognizable value that we can use later to test for high
+        * water marks.
+        */
+
+#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_STACK)
+       memset(tcb->stack_alloc_ptr, 0xaa, stack_size);
+#endif
 
        /* The AVR uses a push-down stack:  the stack grows toward lower
         * addresses in memory.  The stack pointer register, points to the
@@ -117,14 +137,10 @@ int up_create_stack(_TCB *tcb, size_t stack_size)
 
        top_of_stack = (size_t)tcb->stack_alloc_ptr + stack_size - 1;
 
-       /* The AVR stack does not have to be aligned */
-
-       size_of_stack = top_of_stack - (size_t)tcb->stack_alloc_ptr + 1;
-
        /* Save the adjusted stack values in the _TCB */
 
        tcb->adj_stack_ptr  = (FAR void *)top_of_stack;
-       tcb->adj_stack_size = size_of_stack;
+       tcb->adj_stack_size = stack_size;
 
        up_ledon(LED_STACKCREATED);
        return OK;

arch/avr/src/avr/up_usestack.c

@@ -41,6 +41,7 @@
 
 #include <sys/types.h>
 #include <stdint.h>
+#include <string.h>
 #include <sched.h>
 #include <debug.h>
 
@@ -84,10 +85,13 @@
 int up_use_stack(_TCB *tcb, void *stack, size_t stack_size)
 {
   size_t top_of_stack;
-  size_t size_of_stack;
+
+  /* Is there already a stack allocated? */
 
   if (tcb->stack_alloc_ptr)
     {
+      /* Yes.. free it */
+
       sched_free(tcb->stack_alloc_ptr);
     }
 
@@ -95,6 +99,14 @@ int up_use_stack(_TCB *tcb, void *stack, size_t stack_size)
 
   tcb->stack_alloc_ptr = stack;
 
+  /* If stack debug is enabled, then fill the stack with a recognizable value
+   * that we can use later to test for high water marks.
+   */
+
+#if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_STACK)
+   memset(tcb->stack_alloc_ptr, 0xaa, stack_size);
+#endif
+
   /* The AVR uses a push-down stack:  the stack grows toward loweraddresses in
    * memory.  The stack pointer register, points to the lowest, valid work
    * address (the "top" of the stack).  Items on the stack are referenced as
@@ -103,14 +115,10 @@ int up_use_stack(_TCB *tcb, void *stack, size_t stack_size)
 
   top_of_stack = (size_t)tcb->stack_alloc_ptr + stack_size - 1;
 
-  /* The AVR stack does not need to be aligned */
-
-  size_of_stack = top_of_stack - (size_t)tcb->stack_alloc_ptr + 4;
-
   /* Save the adjusted stack values in the _TCB */
 
   tcb->adj_stack_ptr  = (FAR void *)top_of_stack;
-  tcb->adj_stack_size = size_of_stack;
+  tcb->adj_stack_size = stack_size;
 
   return OK;
 }

arch/avr/src/avr32/avr32_internal.h

@@ -101,16 +101,6 @@ extern uint32_t g_heapbase;
 
 extern void up_copystate(uint32_t *dest, uint32_t *src);
 
-/************************************************************************************
- * Name:  up_saveusercontext
- *
- * Description:
- *   Save the register context of the currently executing (user) thread.
- *
- ************************************************************************************/
-
-extern int  up_saveusercontext(uint32_t *saveregs);
-
 /************************************************************************************
  * Name:  up_fullcontextrestore
  *