Add SPI header file

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3008 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2010-10-13 15:06:10 +00:00
parent 5025461c2a
commit aed93ecc12

View File

@ -0,0 +1,166 @@
/************************************************************************************
* arch/avr/src/at91uc3/at91uc3_spi.h
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_AVR_SRC_AT91UC3_AT91UC3_SPI_H
#define __ARCH_AVR_SRC_AT91UC3_AT91UC3_SPI_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Register offsets *****************************************************************/
#define AVR32_SPI_CR_OFFSET 0x000 /* Control Register */
#define AVR32_SPI_MR_OFFSET 0x004 /* Mode Register */
#define AVR32_SPI_RDR_OFFSET 0x008 /* Receive Data Register */
#define AVR32_SPI_TDR_OFFSET 0x00c /* Transmit Data Register */
#define AVR32_SPI_SR_OFFSET 0x010 /* Status Register */
#define AVR32_SPI_IER_OFFSET 0x014 /* Interrupt Enable Register */
#define AVR32_SPI_IDR_OFFSET 0x018 /* Interrupt Disable Register */
#define AVR32_SPI_IMR_OFFSET 0x01c /* Interrupt Mask Register */
#define AVR32_SPI_CSR0_OFFSET 0x030 /* Chip Select Register 0 */
#define AVR32_SPI_CSR1_OFFSET 0x034 /* Chip Select Register 1 */
#define AVR32_SPI_CSR2_OFFSET 0x038 /* Chip Select Register 2 */
#define AVR32_SPI_CSR3_OFFSET 0x03c /* Chip Select Register 3 */
#define AVR32_SPI_VERSION_OFFSET 0x0fc /* Version Register */
/* Register Addresses ***************************************************************/
#define AVR32_SPI0_CR (AVR32_SPI0_BASE+AVR32_SPI_CR_OFFSET)
#define AVR32_SPI0_MR (AVR32_SPI0_BASE+AVR32_SPI_MR_OFFSET)
#define AVR32_SPI0_RDR (AVR32_SPI0_BASE+AVR32_SPI_RDR_OFFSET)
#define AVR32_SPI0_TDR (AVR32_SPI0_BASE+AVR32_SPI_TDR_OFFSET)
#define AVR32_SPI0_SR (AVR32_SPI0_BASE+AVR32_SPI_SR_OFFSET)
#define AVR32_SPI0_IER (AVR32_SPI0_BASE+AVR32_SPI_IER_OFFSET)
#define AVR32_SPI0_IDR (AVR32_SPI0_BASE+AVR32_SPI_IDR_OFFSET)
#define AVR32_SPI0_IMR (AVR32_SPI0_BASE+AVR32_SPI_IMR_OFFSET)
#define AVR32_SPI0_CSR0 (AVR32_SPI0_BASE+AVR32_SPI_CSR0_OFFSET)
#define AVR32_SPI0_CSR1 (AVR32_SPI0_BASE+AVR32_SPI_CSR1_OFFSET)
#define AVR32_SPI0_CSR2 (AVR32_SPI0_BASE+AVR32_SPI_CSR2_OFFSET)
#define AVR32_SPI0_CSR3 (AVR32_SPI0_BASE+AVR32_SPI_CSR3_OFFSET)
#define AVR32_SPI0_VERSION (AVR32_SPI0_BASE+AVR32_SPI_VERSION_OFFSET)
/* Register Bit-field Definitions ***************************************************/
/* Control Register */
#define SPI_CR_SPIEN (1 << 0) /* Bit 0: SPI Enable */
#define SPI_CR_SPIDIS (1 << 1) /* Bit 1: SPI Disable */
#define SPI_CR_SWRST (1 << 7) /* Bit 7: SPI Software Reset */
#define SPI_CR_LASTXFER (1 << 24) /* Bit 24: Last Transfer */
/* Mode Register */
#define SPI_MR_MSTR (1 << 0) /* Bit 0: Master/Slave Mode */
#define SPI_MR_PS (1 << 1) /* Bit 1: Peripheral Select */
#define SPI_MR_PCSDEC (1 << 2) /* Bit 2: Chip Select Decode */
#define SPI_MR_MODFDIS (1 << 4) /* Bit 4: Mode Fault Detection */
#define SPI_MR_LLB (1 << 7) /* Bit 7: Local Loopback Enable */
#define SPI_MR_PCS_SHIFT (16) /* Bits 16-19: Peripheral Chip Select */
#define SPI_MR_PCS_MASK (15 << SPI_MR_PCS_SHIFT)
#define SPI_MR_DLYBCS_SHIFT (24) /* Bits 24-31: Delay Between Chip Selects */
#define SPI_MR_DLYBCS:_MASK (0xff << SPI_MR_DLYBCS_SHIFT)
/* Receive Data Register */
#define SPI_RDR_MASK (0xffff)
/* Transmit Data Register */
#define SPI_TDR_MASK (0xffff)
/* Status Register */
/* Interrupt Enable Register */
/* Interrupt Disable Register */
/* Interrupt Mask Register */
#define SPI_INT_DRF (1 << 0) /* Bit 0: Receive Data Register Full */
#define SPI_INT_TDRE (1 << 1) /* Bit 1: Transmit Data Register Empty */
#define SPI_INT_MODF (1 << 2) /* Bit 2: Mode Fault Error */
#define SPI_INT_OVRES (1 << 3) /* Bit 3: Overrun Error Status */
#define SPI_INT_NSSR (1 << 8) /* Bit 8: NSS Rising */
#define SPI_INT_TXEMPTY (1 << 9) /* Bit 9: Transmission Registers Empty */
#define SPI_SR_SPIENS (1 << 16) /* Bit 16: SPI Enable Status (SR only) */
/* Chip Select Register 0-3 */
#define SPI_CSR_CPOL (1 << 0) /* Bit 0: Clock Polarity */
#define SPI_CSR_NCPHA (1 << 1) /* Bit 1: Clock Phase */
#define SPI_CSR_CSNAAT (1 << 2) /* Bit 2: Chip Select Not Active After Transfer */
#define SPI_CSR_CSAAT (1 << 3) /* Bit 3: Chip Select Active After Transfer */
#define SPI_CSR_BITS_SHIFT (4) /* Bits 4-7: Bits Per Transfer */
#define SPI_CSR_BITS_MASK (15 << SPI_CSR_BITS_SHIFT)
# define SPI_CSR_BITS(n) (((n)-8) << SPI_CSR_BITS_SHIFT)
# define SPI_CSR_8BITS (0 << SPI_CSR_BITS_SHIFT)
# define SPI_CSR_9BITS (1 << SPI_CSR_BITS_SHIFT)
# define SPI_CSR_10BITS (2 << SPI_CSR_BITS_SHIFT)
# define SPI_CSR_11BITS (3 << SPI_CSR_BITS_SHIFT)
# define SPI_CSR_12BITS (4 << SPI_CSR_BITS_SHIFT)
# define SPI_CSR_13BITS (5 << SPI_CSR_BITS_SHIFT)
# define SPI_CSR_14BITS (6 << SPI_CSR_BITS_SHIFT)
# define SPI_CSR_15BITS (7 << SPI_CSR_BITS_SHIFT)
# define SPI_CSR_16BITS (8 << SPI_CSR_BITS_SHIFT)
#define SPI_CSR_SCBR_SHIFT (8) /* Bits 8-15: Serial Clock Baud Rate */
#define SPI_CSR_SCBR_MASK (0xff << SPI_CSR_SCBR_SHIFT)
#define SPI_CSR_DLYBS_SHIFT (16) /* Bits 16-23: Delay Before SPCK */
#define SPI_CSR_DLYBS_MASK (0xff << SPI_CSR_DLYBS_SHIFT)
#define SPI_CSR_DLYBCT_SHIFT (24) /* Bits 24-31: Delay Between Consecutive Transfers */
#define SPI_CSR_DLYBCT_MASK (0xff << SPI_CSR_DLYBCT_SHIFT)
/* Version Register (Values in the Version Register vary with the version of the IP
* block implementation.)
*/
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
#endif /* __ARCH_AVR_SRC_AT91UC3_AT91UC3_SPI_H */