diff --git a/configs/shenzhou/include/board.h b/configs/shenzhou/include/board.h index 2897ac2198..b0fc1b52d5 100644 --- a/configs/shenzhou/include/board.h +++ b/configs/shenzhou/include/board.h @@ -422,6 +422,28 @@ EXTERN void stm32_setleds(uint8_t ledset); EXTERN void stm32_lcdclear(uint16_t color); +/************************************************************************************ + * Relay control functions + * + * Description: + * Non-standard fucntions for relay control from the Shenzhou board. + * + ************************************************************************************/ + +#ifdef CONFIG_ARCH_RELAYS +EXTERN void up_relaysinit(void); +EXTERN void relays_setstat(int relays,bool stat); +EXTERN bool relays_getstat(int relays); +EXTERN void relays_setstats(uint32_t relays_stat); +EXTERN uint32_t relays_getstats(void); +EXTERN void relays_onoff(int relays,uint32_t mdelay); +EXTERN void relays_onoffs(uint32_t relays_stat,uint32_t mdelay); +EXTERN void relays_resetmode(int relays); +EXTERN void relays_powermode(int relays); +EXTERN void relays_resetmodes(uint32_t relays_stat); +EXTERN void relays_powermodes(uint32_t relays_stat); +#endif + #undef EXTERN #if defined(__cplusplus) } diff --git a/configs/shenzhou/src/Makefile b/configs/shenzhou/src/Makefile index 0082a526a6..14dcd9fe68 100644 --- a/configs/shenzhou/src/Makefile +++ b/configs/shenzhou/src/Makefile @@ -56,6 +56,10 @@ ifeq ($(CONFIG_ARCH_BUTTONS),y) CSRCS += up_buttons.c endif +ifeq ($(CONFIG_ARCH_RELAYS),y) +CSRCS += up_relays.c +endif + ifeq ($(CONFIG_STM32_OTGFS),y) CSRCS += up_usb.c endif diff --git a/configs/shenzhou/src/shenzhou-internal.h b/configs/shenzhou/src/shenzhou-internal.h index f9cebc5e38..862a0250dc 100644 --- a/configs/shenzhou/src/shenzhou-internal.h +++ b/configs/shenzhou/src/shenzhou-internal.h @@ -387,10 +387,16 @@ * 58 PD11 SD_CS Active low: Pulled high (See also TFT LCD CN13, pin 32) */ -#define GPIO_SD_CD (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN14) -#define GPIO_SD_CS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\ +#define GPIO_SD_CD (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN14) +#define GPIO_SD_CS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\ GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN11) +/* Relays */ + +#define NUM_RELAYS 1 +#define GPIO_RELAYS_R00 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\ + GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN0) + /**************************************************************************************************** * Public Types ****************************************************************************************************/ diff --git a/configs/shenzhou/src/up_relays.c b/configs/shenzhou/src/up_relays.c new file mode 100644 index 0000000000..075c7d5903 --- /dev/null +++ b/configs/shenzhou/src/up_relays.c @@ -0,0 +1,276 @@ +/**************************************************************************** + * configs/shenzhou/src/up_relays.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * Darcy Gong + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include + +#include +#include "shenzhou-internal.h" +#include + +#ifdef CONFIG_ARCH_RELAYS + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +#define RELAYS_MIN_RESET_TIME 5 +#define RELAYS_RESET_MTIME 5 +#define RELAYS_POWER_MTIME 50 + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +static uint32_t g_relays_stat = 0; + +static const uint16_t g_relays[NUM_RELAYS] = +{ + GPIO_RELAYS_R00 +#ifdef GPIO_RELAYS_R01 + , GPIO_RELAYS_R01 +#endif +#ifdef GPIO_RELAYS_R02 + , GPIO_RELAYS_R02 +#endif +#ifdef GPIO_RELAYS_R03 + , GPIO_RELAYS_R03 +#endif +#ifdef GPIO_RELAYS_R04 + , GPIO_RELAYS_R04 +#endif +#ifdef GPIO_RELAYS_R05 + , GPIO_RELAYS_R05 +#endif +#ifdef GPIO_RELAYS_R06 + , GPIO_RELAYS_R06 +#endif +#ifdef GPIO_RELAYS_R07 + , GPIO_RELAYS_R07 +#endif +#ifdef GPIO_RELAYS_R08 + , GPIO_RELAYS_R08 +#endif +#ifdef GPIO_RELAYS_R09 + , GPIO_RELAYS_R09 +#endif +#ifdef GPIO_RELAYS_R10 + , GPIO_RELAYS_R10 +#endif +#ifdef GPIO_RELAYS_R11 + , GPIO_RELAYS_R11 +#endif +#ifdef GPIO_RELAYS_R12 + , GPIO_RELAYS_R12 +#endif +#ifdef GPIO_RELAYS_R13 + , GPIO_RELAYS_R13 +#endif +#ifdef GPIO_RELAYS_R14 + , GPIO_RELAYS_R14 +#endif +#ifdef GPIO_RELAYS_R15 + , GPIO_RELAYS_R15 +#endif +#ifdef GPIO_RELAYS_R16 + , GPIO_RELAYS_R16 +#endif +#ifdef GPIO_RELAYS_R17 + , GPIO_RELAYS_R17 +#endif +#ifdef GPIO_RELAYS_R18 + , GPIO_RELAYS_R18 +#endif +#ifdef GPIO_RELAYS_R19 + , GPIO_RELAYS_R19 +#endif +#ifdef GPIO_RELAYS_R20 + , GPIO_RELAYS_R20 +#endif +#ifdef GPIO_RELAYS_R21 + , GPIO_RELAYS_R21 +#endif +#ifdef GPIO_RELAYS_R22 + , GPIO_RELAYS_R22 +#endif +#ifdef GPIO_RELAYS_R23 + , GPIO_RELAYS_R23 +#endif +#ifdef GPIO_RELAYS_R24 + , GPIO_RELAYS_R24 +#endif +#ifdef GPIO_RELAYS_R25 + , GPIO_RELAYS_R25 +#endif +#ifdef GPIO_RELAYS_R26 + , GPIO_RELAYS_R26 +#endif +#ifdef GPIO_RELAYS_R27 + , GPIO_RELAYS_R27 +#endif +#ifdef GPIO_RELAYS_R28 + , GPIO_RELAYS_R28 +#endif +#ifdef GPIO_RELAYS_R29 + , GPIO_RELAYS_R29 +#endif +#ifdef GPIO_RELAYS_R30 + , GPIO_RELAYS_R30 +#endif +#ifdef GPIO_RELAYS_R31 + , GPIO_RELAYS_R31 +#endif +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +void up_relaysinit(void) +{ + int i; + + /* Configure the GPIO pins as inputs. NOTE that EXTI interrupts are + * configured for some pins but NOT used in this file + */ + + for (i = 0; i < NUM_RELAYS; i++) + { + stm32_configgpio(g_relays[i]); + } +} + +void relays_setstat(int relays,bool stat) +{ + if ((unsigned)relays < NUM_RELAYS) + { + stm32_gpiowrite(g_relays[relays], stat); + if (!stat) + { + g_relays_stat &= ~(1 << relays); + } + else + { + g_relays_stat |= (1 << relays); + } + } +} + +bool relays_getstat(int relays) +{ + if ((unsigned)relays < NUM_RELAYS) + { + return (g_relays_stat & (1 << relays)) != 0; + } + + return false; +} + +void relays_setstats(uint32_t relays_stat) +{ + int i; + + for (i = 0; i < NUM_RELAYS; i++) + { + relays_setstat(i, (relays_stat & (1<0) + { + if (relays_getstat(relays)) + { + relays_setstat(relays, false); + usleep(RELAYS_MIN_RESET_TIME*1000*1000); + } + + relays_setstat(relays,true); + usleep(mdelay*100*1000); + relays_setstat(relays, false); + } + } +} + +void relays_onoffs(uint32_t relays_stat, uint32_t mdelay) +{ + int i; + + for (i = 0; i < NUM_RELAYS; i++) + { + relays_onoff(i, mdelay); + } +} + +void relays_resetmode(int relays) +{ + relays_onoff(relays, RELAYS_RESET_MTIME); +} + +void relays_powermode(int relays) +{ + relays_onoff(relays, RELAYS_POWER_MTIME); +} + +void relays_resetmodes(uint32_t relays_stat) +{ + relays_onoffs(relays_stat, RELAYS_RESET_MTIME); +} + +void relays_powermodes(uint32_t relays_stat) +{ + relays_onoffs(relays_stat, RELAYS_POWER_MTIME); +} + +#endif /* CONFIG_ARCH_BUTTONS */ diff --git a/configs/stm32f4discovery/README.txt b/configs/stm32f4discovery/README.txt index e8f0ae166b..57db94e1e6 100644 --- a/configs/stm32f4discovery/README.txt +++ b/configs/stm32f4discovery/README.txt @@ -1007,7 +1007,12 @@ Where is one of the following: 3. By default, this project assumes that you are *NOT* using the DFU bootloader. - 4. This configuration requires that you have the genromfs tool installed + 4. It appears that you cannot excute from CCM RAM. This is why the + following definition appears in the defconfig file: + + CONFIG_STM32_CCMEXCLUDE=y + + 5. This configuration requires that you have the genromfs tool installed on your system and that you have the full path to the installed genromfs executable in PATH variable (see apps/examples/README.txt)