Support for relays on the Shenzhou board (Darcy Gong)

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5266 42af7a65-404d-4744-a932-0658087f49c3

configs/shenzhou/include/board.h

@@ -422,6 +422,28 @@ EXTERN void stm32_setleds(uint8_t ledset);
 
 EXTERN void stm32_lcdclear(uint16_t color);
 
+/************************************************************************************
+ * Relay control functions
+ *
+ * Description:
+ *   Non-standard fucntions for relay control from the Shenzhou board.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_ARCH_RELAYS
+EXTERN void up_relaysinit(void);
+EXTERN void relays_setstat(int relays,bool stat);
+EXTERN bool relays_getstat(int relays);
+EXTERN void relays_setstats(uint32_t relays_stat);
+EXTERN uint32_t relays_getstats(void);
+EXTERN void relays_onoff(int relays,uint32_t mdelay);
+EXTERN void relays_onoffs(uint32_t relays_stat,uint32_t mdelay);
+EXTERN void relays_resetmode(int relays);
+EXTERN void relays_powermode(int relays);
+EXTERN void relays_resetmodes(uint32_t relays_stat);
+EXTERN void relays_powermodes(uint32_t relays_stat);
+#endif
+
 #undef EXTERN
 #if defined(__cplusplus)
 }

configs/shenzhou/src/Makefile

@@ -56,6 +56,10 @@ ifeq ($(CONFIG_ARCH_BUTTONS),y)
 CSRCS		+=  up_buttons.c
 endif
 
+ifeq ($(CONFIG_ARCH_RELAYS),y)
+CSRCS		+=  up_relays.c
+endif
+
 ifeq ($(CONFIG_STM32_OTGFS),y)
 CSRCS		+= up_usb.c
 endif

configs/shenzhou/src/shenzhou-internal.h

@@ -391,6 +391,12 @@
 #define GPIO_SD_CS      (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
                          GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN11)
 
+/* Relays */
+
+#define NUM_RELAYS      1
+#define GPIO_RELAYS_R00 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
+                         GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN0)
+
 /****************************************************************************************************
  * Public Types
  ****************************************************************************************************/

configs/shenzhou/src/up_relays.c

@@ -0,0 +1,276 @@
+/****************************************************************************
+ * configs/shenzhou/src/up_relays.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *           Darcy Gong
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <unistd.h>
+
+#include <arch/board/board.h>
+#include "shenzhou-internal.h"
+#include <debug.h>
+
+#ifdef CONFIG_ARCH_RELAYS
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#define RELAYS_MIN_RESET_TIME 5
+#define RELAYS_RESET_MTIME 5
+#define RELAYS_POWER_MTIME 50
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static uint32_t g_relays_stat = 0;
+
+static const uint16_t g_relays[NUM_RELAYS] =
+{
+  GPIO_RELAYS_R00
+#ifdef GPIO_RELAYS_R01
+  , GPIO_RELAYS_R01
+#endif
+#ifdef GPIO_RELAYS_R02
+  , GPIO_RELAYS_R02
+#endif
+#ifdef GPIO_RELAYS_R03
+  , GPIO_RELAYS_R03
+#endif
+#ifdef GPIO_RELAYS_R04
+  , GPIO_RELAYS_R04
+#endif
+#ifdef GPIO_RELAYS_R05
+  , GPIO_RELAYS_R05
+#endif
+#ifdef GPIO_RELAYS_R06
+  , GPIO_RELAYS_R06
+#endif
+#ifdef GPIO_RELAYS_R07
+  , GPIO_RELAYS_R07
+#endif
+#ifdef GPIO_RELAYS_R08
+  , GPIO_RELAYS_R08
+#endif
+#ifdef GPIO_RELAYS_R09
+  , GPIO_RELAYS_R09
+#endif
+#ifdef GPIO_RELAYS_R10
+  , GPIO_RELAYS_R10
+#endif
+#ifdef GPIO_RELAYS_R11
+  , GPIO_RELAYS_R11
+#endif
+#ifdef GPIO_RELAYS_R12
+  , GPIO_RELAYS_R12
+#endif
+#ifdef GPIO_RELAYS_R13
+  , GPIO_RELAYS_R13
+#endif
+#ifdef GPIO_RELAYS_R14
+  , GPIO_RELAYS_R14
+#endif
+#ifdef GPIO_RELAYS_R15
+  , GPIO_RELAYS_R15
+#endif
+#ifdef GPIO_RELAYS_R16
+  , GPIO_RELAYS_R16
+#endif
+#ifdef GPIO_RELAYS_R17
+  , GPIO_RELAYS_R17
+#endif
+#ifdef GPIO_RELAYS_R18
+  , GPIO_RELAYS_R18
+#endif
+#ifdef GPIO_RELAYS_R19
+  , GPIO_RELAYS_R19
+#endif
+#ifdef GPIO_RELAYS_R20
+  , GPIO_RELAYS_R20
+#endif
+#ifdef GPIO_RELAYS_R21
+  , GPIO_RELAYS_R21
+#endif
+#ifdef GPIO_RELAYS_R22
+  , GPIO_RELAYS_R22
+#endif
+#ifdef GPIO_RELAYS_R23
+  , GPIO_RELAYS_R23
+#endif
+#ifdef GPIO_RELAYS_R24
+  , GPIO_RELAYS_R24
+#endif
+#ifdef GPIO_RELAYS_R25
+  , GPIO_RELAYS_R25
+#endif
+#ifdef GPIO_RELAYS_R26
+  , GPIO_RELAYS_R26
+#endif
+#ifdef GPIO_RELAYS_R27
+  , GPIO_RELAYS_R27
+#endif
+#ifdef GPIO_RELAYS_R28
+  , GPIO_RELAYS_R28
+#endif
+#ifdef GPIO_RELAYS_R29
+  , GPIO_RELAYS_R29
+#endif
+#ifdef GPIO_RELAYS_R30
+  , GPIO_RELAYS_R30
+#endif
+#ifdef GPIO_RELAYS_R31
+  , GPIO_RELAYS_R31
+#endif
+};
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+void up_relaysinit(void)
+{
+  int i;
+
+  /* Configure the GPIO pins as inputs.  NOTE that EXTI interrupts are
+   * configured for some pins but NOT used in this file
+   */
+
+  for (i = 0; i < NUM_RELAYS; i++)
+    {
+      stm32_configgpio(g_relays[i]);
+    }
+}
+
+void relays_setstat(int relays,bool stat)
+{
+  if ((unsigned)relays < NUM_RELAYS)
+    {
+      stm32_gpiowrite(g_relays[relays], stat);
+      if (!stat)
+        {
+          g_relays_stat &= ~(1 << relays);
+        }
+      else
+        {
+          g_relays_stat |= (1 << relays);
+        }
+    }
+}
+
+bool relays_getstat(int relays)
+{
+  if ((unsigned)relays < NUM_RELAYS)
+    {
+      return (g_relays_stat & (1 << relays)) != 0;
+    }
+
+  return false;
+}
+
+void relays_setstats(uint32_t relays_stat)
+{
+  int i;
+
+  for (i = 0; i < NUM_RELAYS; i++)
+    {
+      relays_setstat(i, (relays_stat & (1<<i))!=0);
+    }
+}
+
+uint32_t relays_getstats(void)
+{
+  return (uint32_t)g_relays_stat;
+}
+
+void relays_onoff(int relays, uint32_t mdelay)
+{
+  if ((unsigned)relays < NUM_RELAYS)
+    {
+      if (mdelay>0)
+        {
+          if (relays_getstat(relays))
+            {
+              relays_setstat(relays, false);
+              usleep(RELAYS_MIN_RESET_TIME*1000*1000);
+            }
+
+          relays_setstat(relays,true);
+          usleep(mdelay*100*1000);
+          relays_setstat(relays, false);
+        }
+    }
+}
+
+void relays_onoffs(uint32_t relays_stat, uint32_t mdelay)
+{
+  int i;
+
+  for (i = 0; i < NUM_RELAYS; i++)
+    {
+      relays_onoff(i, mdelay);
+    }
+}
+
+void relays_resetmode(int relays)
+{
+  relays_onoff(relays, RELAYS_RESET_MTIME);
+}
+
+void relays_powermode(int relays)
+{
+  relays_onoff(relays, RELAYS_POWER_MTIME);
+}
+
+void relays_resetmodes(uint32_t relays_stat)
+{
+  relays_onoffs(relays_stat, RELAYS_RESET_MTIME);
+}
+
+void relays_powermodes(uint32_t relays_stat)
+{
+  relays_onoffs(relays_stat, RELAYS_POWER_MTIME);
+}
+
+#endif /* CONFIG_ARCH_BUTTONS */

configs/stm32f4discovery/README.txt

@@ -1007,7 +1007,12 @@ Where <subdir> is one of the following:
     3. By default, this project assumes that you are *NOT* using the DFU
        bootloader.
  
-    4. This configuration requires that you have the genromfs tool installed
+    4. It appears that you cannot excute from CCM RAM.  This is why the
+       following definition appears in the defconfig file:
+
+       CONFIG_STM32_CCMEXCLUDE=y
+
+    5. This configuration requires that you have the genromfs tool installed
        on your system and that you have the full path to the installed genromfs
        executable in PATH variable (see apps/examples/README.txt)