sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

boards: Nxstyle fixes

Browse Source 
Nxstyle fixes to pass CI

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This commit is contained in:
Alin Jerpelea 2021-04-01 08:20:14 +02:00 committed by Xiang Xiao
parent 3d96d5f2ce
commit b1ca7cf3ce
34 changed files with 521 additions and 356 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
boards/arm/am335x/beaglebone-black/include/board.h
View File

@ -78,7 +78,7 @@
* *
* SYMBOL Value Meaning LED state * SYMBOL Value Meaning LED state
* LED0 LED1 LED2 * LED0 LED1 LED2
* ----------------- ----- ----------------------- ---- ---- ---------* * ----------------- ----- ----------------------- ---- ---- ---------
*/ */
#define LED_STARTED 0 /* NuttX has been started ON OFF OFF */ #define LED_STARTED 0 /* NuttX has been started ON OFF OFF */
@ -90,7 +90,7 @@
#define LED_ASSERTION 3 /* An assertion failed N/C N/C Soft glow */ #define LED_ASSERTION 3 /* An assertion failed N/C N/C Soft glow */
#define LED_PANIC 3 /* The system has crashed N/C N/C 2Hz Flashing */ #define LED_PANIC 3 /* The system has crashed N/C N/C 2Hz Flashing */
/* LED_IDLE --- /* MCU is is sleep mode Not used /* LED_IDLE --- MCU is is sleep mode Not used
* *
* After booting, LED0 and 1 are not longer used by the system and can be * After booting, LED0 and 1 are not longer used by the system and can be
* used for other purposes by the application (Of course, all LEDs are * used for other purposes by the application (Of course, all LEDs are
@ -107,12 +107,12 @@
* *
* 1. UART0 is available on FT2232H USB to Serial Adapter. * 1. UART0 is available on FT2232H USB to Serial Adapter.
* *
* FT2232H BDBUS1 Pin UART0-RXD UART0_RXD/SPI1_CS0/DCAN0_TX/I2C2_SDA/ * FT2232H BDBUS1 Pin UART0-RXD UART0_RXD/SPI1_CS0/DCAN0_TX/I2C2_SDA/
* eCAP2_IN_PWM2_OUT/PR1_PRU1_PRU_R30_14/ * eCAP2_IN_PWM2_OUT/PR1_PRU1_PRU_R30_14/
* PR1_PRU1_PRU_R31_14/GPIO1_10 * PR1_PRU1_PRU_R31_14/GPIO1_10
* FT2232H BDBUS0 Pin UART0-TXD UART0_TXD/SPI1_CS1/DCAN0_RX/I2C2_SCL/ * FT2232H BDBUS0 Pin UART0-TXD UART0_TXD/SPI1_CS1/DCAN0_RX/I2C2_SCL/
* eCAP1_IN_PWM1_OUT/PR1_PRU1_PRU_R30_15/ * eCAP1_IN_PWM1_OUT/PR1_PRU1_PRU_R30_15/
* PR1_PRU1_PRU_R31_15/GPIO1_11 * PR1_PRU1_PRU_R31_15/GPIO1_11
*/ */
/* I2Cs *********************************************************************/ /* I2Cs *********************************************************************/

4
boards/arm/imxrt/imxrt1020-evk/src/imxrt_flexspi_nor_boot.c
View File

@ -49,3 +49,7 @@ const struct boot_data_s g_boot_data =
PLUGIN_FLAG, /* Plugin flag */ PLUGIN_FLAG, /* Plugin flag */
0xffffffff /* empty - extra data word */ 0xffffffff /* empty - extra data word */
}; };
/****************************************************************************
* Public Functions
****************************************************************************/

40
boards/arm/imxrt/imxrt1020-evk/src/imxrt_flexspi_nor_flash.h
View File

@ -142,7 +142,9 @@
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS CMD_LUT_SEQ_IDX_READSTATUS #define NOR_CMD_LUT_SEQ_IDX_READSTATUS CMD_LUT_SEQ_IDX_READSTATUS
/* 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block */ /* 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config
* block
*/
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 2 #define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 2
@ -150,7 +152,9 @@
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE CMD_LUT_SEQ_IDX_WRITEENABLE #define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE CMD_LUT_SEQ_IDX_WRITEENABLE
/* 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block */ /* 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config
* block
*/
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI 4 #define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI 4
@ -174,11 +178,15 @@
#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 #define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13
/* 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block */ /* 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config
* block
*/
#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD 14 #define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD 14
/* 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk */ /* 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config
* blobk
*/
#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD 15 #define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD 15
@ -201,7 +209,7 @@ enum flexspi_serial_clkfreq_e
FLEXSPI_SERIAL_CLKFREQ_200MHz = 9, FLEXSPI_SERIAL_CLKFREQ_200MHz = 9,
}; };
/* FlexSPI clock configuration type*/ /* FlexSPI clock configuration type */
enum flexspi_serial_clockmode_e enum flexspi_serial_clockmode_e
{ {
@ -327,17 +335,17 @@ struct flexspi_mem_config_s
struct flexspi_nor_config_s struct flexspi_nor_config_s
{ {
struct flexspi_mem_config_s mem_config; /* Common memory configuration info via FlexSPI */ struct flexspi_mem_config_s mem_config; /* Common memory configuration info via FlexSPI */
uint32_t page_size; /* Page size of Serial NOR */ uint32_t page_size; /* Page size of Serial NOR */
uint32_t sector_size; /* Sector size of Serial NOR */ uint32_t sector_size; /* Sector size of Serial NOR */
uint8_t ipcmd_serial_clkfreq; /* Clock frequency for IP command */ uint8_t ipcmd_serial_clkfreq; /* Clock frequency for IP command */
uint8_t is_uniform_blocksize; /* Sector/Block size is the same */ uint8_t is_uniform_blocksize; /* Sector/Block size is the same */
uint8_t reserved0[2]; /* Reserved for future use */ uint8_t reserved0[2]; /* Reserved for future use */
uint8_t serial_nor_type; /* Serial NOR Flash type: 0/1/2/3 */ uint8_t serial_nor_type; /* Serial NOR Flash type: 0/1/2/3 */
uint8_t need_exit_nocmdmode; /* Need to exit NoCmd mode before other IP command */ uint8_t need_exit_nocmdmode; /* Need to exit NoCmd mode before other IP command */
uint8_t halfclk_for_nonreadcmd; /* Half the Serial Clock for non-read command: true/false */ uint8_t halfclk_for_nonreadcmd; /* Half the Serial Clock for non-read command: true/false */
uint8_t need_restore_nocmdmode; /* Need to Restore NoCmd mode after IP command execution */ uint8_t need_restore_nocmdmode; /* Need to Restore NoCmd mode after IP command execution */
uint32_t blocksize; /* Block size */ uint32_t blocksize; /* Block size */
uint32_t reserve2[11]; /* Reserved for future use */ uint32_t reserve2[11]; /* Reserved for future use */
}; };
#endif /* __BOARDS_ARM_IMXRT1020_EVK_SRC_IMXRT_FLEXSPI_NOR_FLASH_H */ #endif /* __BOARDS_ARM_IMXRT1020_EVK_SRC_IMXRT_FLEXSPI_NOR_FLASH_H */

4
boards/arm/imxrt/imxrt1050-evk/src/imxrt_flexspi_nor_boot.c
View File

@ -49,3 +49,7 @@ const struct boot_data_s g_boot_data =
PLUGIN_FLAG, /* Plugin flag */ PLUGIN_FLAG, /* Plugin flag */
0xffffffff /* empty - extra data word */ 0xffffffff /* empty - extra data word */
}; };
/****************************************************************************
* Public Functions
****************************************************************************/

79
boards/arm/imxrt/imxrt1050-evk/src/imxrt_flexspi_nor_flash.c
View File

@ -32,32 +32,41 @@
__attribute__((section(".boot_hdr.conf"))) __attribute__((section(".boot_hdr.conf")))
const struct flexspi_nor_config_s g_flash_config = const struct flexspi_nor_config_s g_flash_config =
{ {
.mem_config = .mem_config =
{ {
.tag = FLEXSPI_CFG_BLK_TAG, .tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION, .version = FLEXSPI_CFG_BLK_VERSION,
.read_sample_clksrc = FLASH_READ_SAMPLE_CLK_EXTERNALINPUT_FROM_DQSPAD, .read_sample_clksrc = FLASH_READ_SAMPLE_CLK_EXTERNALINPUT_FROM_DQSPAD,
.cs_hold_time = 3u, .cs_hold_time = 3u,
.cs_setup_time = 3u, .cs_setup_time = 3u,
.column_address_width = 3u, .column_address_width = 3u,
/* Enable DDR mode, Word addassable, Safe configuration, Differential clock */ /* Enable DDR mode, Word addassable,
* Safe configuration, Differential clock
*/
.controller_misc_option = (1u << FLEXSPIMISC_OFFSET_DDR_MODE_EN) | .controller_misc_option =
(1u << FLEXSPIMISC_OFFSET_WORD_ADDRESSABLE_EN) | (1u << FLEXSPIMISC_OFFSET_DDR_MODE_EN) |
(1u << FLEXSPIMISC_OFFSET_SAFECONFIG_FREQ_EN) | (1u << FLEXSPIMISC_OFFSET_WORD_ADDRESSABLE_EN) |
(1u << FLEXSPIMISC_OFFSET_DIFFCLKEN), (1u << FLEXSPIMISC_OFFSET_SAFECONFIG_FREQ_EN) |
.sflash_pad_type = SERIAL_FLASH_8PADS, (1u << FLEXSPIMISC_OFFSET_DIFFCLKEN),
.serial_clk_freq = FLEXSPI_SERIAL_CLKFREQ_133MHz, .sflash_pad_type = SERIAL_FLASH_8PADS,
.sflash_a1size = 64u * 1024u * 1024u, .serial_clk_freq = FLEXSPI_SERIAL_CLKFREQ_133MHz,
.data_valid_time = {16u, 16u}, .sflash_a1size = 64u * 1024u * 1024u,
.lookup_table = .data_valid_time =
{
16u, 16u
},
.lookup_table =
{ {
/* Read LUTs */ /* Read LUTs */
FLEXSPI_LUT_SEQ(CMD_DDR, FLEXSPI_8PAD, 0xa0, RADDR_DDR, FLEXSPI_8PAD, 0x18), FLEXSPI_LUT_SEQ(CMD_DDR,
FLEXSPI_LUT_SEQ(CADDR_DDR, FLEXSPI_8PAD, 0x10, DUMMY_DDR, FLEXSPI_8PAD, 0x06), FLEXSPI_8PAD, 0xa0, RADDR_DDR, FLEXSPI_8PAD, 0x18),
FLEXSPI_LUT_SEQ(READ_DDR, FLEXSPI_8PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(CADDR_DDR,
FLEXSPI_8PAD, 0x10, DUMMY_DDR, FLEXSPI_8PAD, 0x06),
FLEXSPI_LUT_SEQ(READ_DDR,
FLEXSPI_8PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0),
}, },
}, },
.page_size = 512u, .page_size = 512u,
@ -82,21 +91,29 @@ const struct flexspi_nor_config_s g_flash_config =
.sflash_pad_type = SERIAL_FLASH_4PADS, .sflash_pad_type = SERIAL_FLASH_4PADS,
.serial_clk_freq = FLEXSPI_SERIAL_CLKFREQ_60MHz, .serial_clk_freq = FLEXSPI_SERIAL_CLKFREQ_60MHz,
.sflash_a1size = 8u * 1024u * 1024u, .sflash_a1size = 8u * 1024u * 1024u,
.data_valid_time = {16u, 16u}, .data_valid_time =
{
16u, 16u
},
.lookup_table = .lookup_table =
{ {
/* LUTs */ /* LUTs */
/* 0 Fast read Quad IO DTR Mode Operation in SPI Mode (normal read) */ /* 0 Fast read Quad IO DTR Mode Operation in SPI Mode (normal read) */
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xed, RADDR_DDR, FLEXSPI_4PAD, 0x18), FLEXSPI_LUT_SEQ(CMD_SDR,
FLEXSPI_LUT_SEQ(DUMMY_DDR, FLEXSPI_4PAD, 0x0c, READ_DDR, FLEXSPI_4PAD, 0x08), FLEXSPI_1PAD, 0xed, RADDR_DDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(DUMMY_DDR,
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_4PAD, 0x0c, READ_DDR, FLEXSPI_4PAD, 0x08),
FLEXSPI_LUT_SEQ(STOP,
FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP,
FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
/* 1 Read Status */ /* 1 Read Status */
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x1), FLEXSPI_LUT_SEQ(CMD_SDR,
FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x1),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
@ -124,7 +141,8 @@ const struct flexspi_nor_config_s g_flash_config =
/* 5 Erase Sector */ /* 5 Erase Sector */
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xd7, RADDR_SDR, FLEXSPI_1PAD, 0x18), FLEXSPI_LUT_SEQ(CMD_SDR,
FLEXSPI_1PAD, 0xd7, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
@ -152,7 +170,8 @@ const struct flexspi_nor_config_s g_flash_config =
/* 9 Page Program */ /* 9 Page Program */
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 0x18), FLEXSPI_LUT_SEQ(CMD_SDR,
FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x8, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x8, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
@ -181,3 +200,7 @@ const struct flexspi_nor_config_s g_flash_config =
#else #else
# error Boot Flash type not chosen! # error Boot Flash type not chosen!
#endif #endif
/****************************************************************************
* Public Functions
****************************************************************************/

38
boards/arm/imxrt/imxrt1050-evk/src/imxrt_flexspi_nor_flash.h
View File

@ -140,7 +140,9 @@
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS CMD_LUT_SEQ_IDX_READSTATUS #define NOR_CMD_LUT_SEQ_IDX_READSTATUS CMD_LUT_SEQ_IDX_READSTATUS
/* 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block */ /* 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config
* block
*/
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 2 #define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 2
@ -148,7 +150,9 @@
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE CMD_LUT_SEQ_IDX_WRITEENABLE #define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE CMD_LUT_SEQ_IDX_WRITEENABLE
/* 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block */ /* 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config
* block
*/
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI 4 #define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI 4
@ -172,11 +176,15 @@
#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 #define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13
/* 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block */ /* 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config
* block
*/
#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD 14 #define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD 14
/* 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk */ /* 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config
* blobk
*/
#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD 15 #define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD 15
@ -326,17 +334,17 @@ struct flexspi_mem_config_s
struct flexspi_nor_config_s struct flexspi_nor_config_s
{ {
struct flexspi_mem_config_s mem_config; /* Common memory configuration info via FlexSPI */ struct flexspi_mem_config_s mem_config; /* Common memory configuration info via FlexSPI */
uint32_t page_size; /* Page size of Serial NOR */ uint32_t page_size; /* Page size of Serial NOR */
uint32_t sector_size; /* Sector size of Serial NOR */ uint32_t sector_size; /* Sector size of Serial NOR */
uint8_t ipcmd_serial_clkfreq; /* Clock frequency for IP command */ uint8_t ipcmd_serial_clkfreq; /* Clock frequency for IP command */
uint8_t is_uniform_blocksize; /* Sector/Block size is the same */ uint8_t is_uniform_blocksize; /* Sector/Block size is the same */
uint8_t reserved0[2]; /* Reserved for future use */ uint8_t reserved0[2]; /* Reserved for future use */
uint8_t serial_nor_type; /* Serial NOR Flash type: 0/1/2/3 */ uint8_t serial_nor_type; /* Serial NOR Flash type: 0/1/2/3 */
uint8_t need_exit_nocmdmode; /* Need to exit NoCmd mode before other IP command */ uint8_t need_exit_nocmdmode; /* Need to exit NoCmd mode before other IP command */
uint8_t halfclk_for_nonreadcmd; /* Half the Serial Clock for non-read command: true/false */ uint8_t halfclk_for_nonreadcmd; /* Half the Serial Clock for non-read command: true/false */
uint8_t need_restore_nocmdmode; /* Need to Restore NoCmd mode after IP command execution */ uint8_t need_restore_nocmdmode; /* Need to Restore NoCmd mode after IP command execution */
uint32_t blocksize; /* Block size */ uint32_t blocksize; /* Block size */
uint32_t reserve2[11]; /* Reserved for future use */ uint32_t reserve2[11]; /* Reserved for future use */
}; };
#endif /* __BOARDS_ARM_IMXRT_IMXRT1050_EVK_SRC_IMXRT_FLEXSPI_NOR_FLASH_H */ #endif /* __BOARDS_ARM_IMXRT_IMXRT1050_EVK_SRC_IMXRT_FLEXSPI_NOR_FLASH_H */

12
boards/arm/imxrt/imxrt1050-evk/src/imxrt_spi.c
View File

@ -70,12 +70,12 @@ void weak_function imxrt_spidev_initialize(void)
* Name: imxrt_lpspi1/2/3select and imxrt_lpspi1/2/3status * Name: imxrt_lpspi1/2/3select and imxrt_lpspi1/2/3status
* *
* Description: * Description:
* The external functions, imxrt_lpspi1/2/3select and imxrt_lpspi1/2/3status * The external functions, imxrt_lpspi1/2/3select and
* must be provided by board-specific logic. * imxrt_lpspi1/2/3status must be provided by board-specific logic.
* They are implementations of the select and status methods of the SPI * They are implementations of the select and status methods of the SPI
* interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h). * interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
* All other methods (including imxrt_lpspibus_initialize()) are provided by * All other methods (including imxrt_lpspibus_initialize()) are provided
* common STM32 logic. To use this common SPI logic on your board: * by common STM32 logic. To use this common SPI logic on your board:
* *
* 1. Provide logic in imxrt_boardinitialize() to configure SPI chip select * 1. Provide logic in imxrt_boardinitialize() to configure SPI chip select
* pins. * pins.
@ -85,8 +85,8 @@ void weak_function imxrt_spidev_initialize(void)
* using GPIOs in the way your board is configured. * using GPIOs in the way your board is configured.
* 3. Add a calls to imxrt_lpspibus_initialize() in your low level * 3. Add a calls to imxrt_lpspibus_initialize() in your low level
* application initialization logic * application initialization logic
* 4. The handle returned by imxrt_lpspibus_initialize() may then be used to * 4. The handle returned by imxrt_lpspibus_initialize() may then be used
* bind the SPI driver to higher level logic (e.g., calling * to bind the SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver). * the SPI MMC/SD driver).
* *

4
boards/arm/imxrt/imxrt1060-evk/src/imxrt_flexspi_nor_boot.c
View File

@ -49,3 +49,7 @@ const struct boot_data_s g_boot_data =
PLUGIN_FLAG, /* Plugin flag */ PLUGIN_FLAG, /* Plugin flag */
0xffffffff /* empty - extra data word */ 0xffffffff /* empty - extra data word */
}; };
/****************************************************************************
* Public Functions
****************************************************************************/

4
boards/arm/imxrt/imxrt1060-evk/src/imxrt_flexspi_nor_boot.h
View File

@ -61,7 +61,9 @@
#define FLASH_BASE 0x60000000 #define FLASH_BASE 0x60000000
#define FLASH_END 0x7f7fffff #define FLASH_END 0x7f7fffff
/* This needs to take into account the memory configuration at boot bootloader */ /* This needs to take into account the memory configuration at boot
* bootloader
*/
#define ROM_BOOTLOADER_OCRAM_RES 0x8000 #define ROM_BOOTLOADER_OCRAM_RES 0x8000
#define OCRAM_BASE (0x20200000 + ROM_BOOTLOADER_OCRAM_RES) #define OCRAM_BASE (0x20200000 + ROM_BOOTLOADER_OCRAM_RES)

62
boards/arm/imxrt/imxrt1060-evk/src/imxrt_flexspi_nor_flash.c
View File

@ -32,31 +32,39 @@
__attribute__((section(".boot_hdr.conf"))) __attribute__((section(".boot_hdr.conf")))
const struct flexspi_nor_config_s g_flash_config = const struct flexspi_nor_config_s g_flash_config =
{ {
.mem_config = .mem_config =
{ {
.tag = FLEXSPI_CFG_BLK_TAG, .tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION, .version = FLEXSPI_CFG_BLK_VERSION,
.read_sample_clksrc = FLASH_READ_SAMPLE_CLK_EXTERNALINPUT_FROM_DQSPAD, .read_sample_clksrc = FLASH_READ_SAMPLE_CLK_EXTERNALINPUT_FROM_DQSPAD,
.cs_hold_time = 3u, .cs_hold_time = 3u,
.cs_setup_time = 3u, .cs_setup_time = 3u,
.column_address_width = 3u, .column_address_width = 3u,
/* Enable DDR mode, Word addassable, Safe configuration, Differential clock */ /* Enable DDR mode, Word addassable,
* Safe configuration, Differential clock
*/
.controller_misc_option = (1u << FLEXSPIMISC_OFFSET_DDR_MODE_EN) | .controller_misc_option =
(1u << FLEXSPIMISC_OFFSET_WORD_ADDRESSABLE_EN) | (1u << FLEXSPIMISC_OFFSET_DDR_MODE_EN) |
(1u << FLEXSPIMISC_OFFSET_SAFECONFIG_FREQ_EN) | (1u << FLEXSPIMISC_OFFSET_WORD_ADDRESSABLE_EN) |
(1u << FLEXSPIMISC_OFFSET_DIFFCLKEN), (1u << FLEXSPIMISC_OFFSET_SAFECONFIG_FREQ_EN) |
(1u << FLEXSPIMISC_OFFSET_DIFFCLKEN),
.sflash_pad_type = SERIAL_FLASH_8PADS, .sflash_pad_type = SERIAL_FLASH_8PADS,
.serial_clk_freq = FLEXSPI_SERIAL_CLKFREQ_133MHz, .serial_clk_freq = FLEXSPI_SERIAL_CLKFREQ_133MHz,
.sflash_a1size = 64u * 1024u * 1024u, .sflash_a1size = 64u * 1024u * 1024u,
.data_valid_time = {16u, 16u}, .data_valid_time =
{
16u, 16u
},
.lookup_table = .lookup_table =
{ {
/* Read LUTs */ /* Read LUTs */
FLEXSPI_LUT_SEQ(CMD_DDR, FLEXSPI_8PAD, 0xa0, RADDR_DDR, FLEXSPI_8PAD, 0x18), FLEXSPI_LUT_SEQ(CMD_DDR,
FLEXSPI_LUT_SEQ(CADDR_DDR, FLEXSPI_8PAD, 0x10, DUMMY_DDR, FLEXSPI_8PAD, 0x06), FLEXSPI_8PAD, 0xa0, RADDR_DDR, FLEXSPI_8PAD, 0x18),
FLEXSPI_LUT_SEQ(CADDR_DDR,
FLEXSPI_8PAD, 0x10, DUMMY_DDR, FLEXSPI_8PAD, 0x06),
FLEXSPI_LUT_SEQ(READ_DDR, FLEXSPI_8PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(READ_DDR, FLEXSPI_8PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0),
}, },
}, },
@ -82,21 +90,27 @@ const struct flexspi_nor_config_s g_flash_config =
.sflash_pad_type = SERIAL_FLASH_4PADS, .sflash_pad_type = SERIAL_FLASH_4PADS,
.serial_clk_freq = FLEXSPI_SERIAL_CLKFREQ_60MHz, .serial_clk_freq = FLEXSPI_SERIAL_CLKFREQ_60MHz,
.sflash_a1size = 8u * 1024u * 1024u, .sflash_a1size = 8u * 1024u * 1024u,
.data_valid_time = {16u, 16u}, .data_valid_time =
{
16u, 16u
},
.lookup_table = .lookup_table =
{ {
/* LUTs */ /* LUTs */
/* 0 Fast read Quad IO DTR Mode Operation in SPI Mode (normal read) */ /* 0 Fast read Quad IO DTR Mode Operation in SPI Mode (normal read) */
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xed, RADDR_DDR, FLEXSPI_4PAD, 0x18), FLEXSPI_LUT_SEQ(CMD_SDR,
FLEXSPI_LUT_SEQ(DUMMY_DDR, FLEXSPI_4PAD, 0x0c, READ_DDR, FLEXSPI_4PAD, 0x08), FLEXSPI_1PAD, 0xed, RADDR_DDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_DDR,
FLEXSPI_4PAD, 0x0c, READ_DDR, FLEXSPI_4PAD, 0x08),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
/* 1 Read Status */ /* 1 Read Status */
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x1), FLEXSPI_LUT_SEQ(CMD_SDR,
FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x1),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
@ -124,7 +138,8 @@ const struct flexspi_nor_config_s g_flash_config =
/* 5 Erase Sector */ /* 5 Erase Sector */
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xd7, RADDR_SDR, FLEXSPI_1PAD, 0x18), FLEXSPI_LUT_SEQ(CMD_SDR,
FLEXSPI_1PAD, 0xd7, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
@ -152,7 +167,8 @@ const struct flexspi_nor_config_s g_flash_config =
/* 9 Page Program */ /* 9 Page Program */
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 0x18), FLEXSPI_LUT_SEQ(CMD_SDR,
FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x8, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x8, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0), FLEXSPI_LUT_SEQ(STOP, FLEXSPI_1PAD, 0x0, STOP, FLEXSPI_1PAD, 0x0),
@ -181,3 +197,7 @@ const struct flexspi_nor_config_s g_flash_config =
#else #else
# error Boot Flash type not chosen! # error Boot Flash type not chosen!
#endif #endif
/****************************************************************************
* Public Functions
****************************************************************************/

38
boards/arm/imxrt/imxrt1060-evk/src/imxrt_flexspi_nor_flash.h
View File

@ -142,7 +142,9 @@
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS CMD_LUT_SEQ_IDX_READSTATUS #define NOR_CMD_LUT_SEQ_IDX_READSTATUS CMD_LUT_SEQ_IDX_READSTATUS
/* 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block */ /* 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config
* block
*/
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 2 #define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI 2
@ -150,7 +152,9 @@
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE CMD_LUT_SEQ_IDX_WRITEENABLE #define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE CMD_LUT_SEQ_IDX_WRITEENABLE
/* 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block */ /* 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config
* block
*/
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI 4 #define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI 4
@ -174,11 +178,15 @@
#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 #define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13
/* 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block */ /* 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config
* block
*/
#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD 14 #define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD 14
/* 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk */ /* 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config
* blobk
*/
#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD 15 #define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD 15
@ -329,17 +337,17 @@ struct flexspi_mem_config_s
struct flexspi_nor_config_s struct flexspi_nor_config_s
{ {
struct flexspi_mem_config_s mem_config; /* Common memory configuration info via FlexSPI */ struct flexspi_mem_config_s mem_config; /* Common memory configuration info via FlexSPI */
uint32_t page_size; /* Page size of Serial NOR */ uint32_t page_size; /* Page size of Serial NOR */
uint32_t sector_size; /* Sector size of Serial NOR */ uint32_t sector_size; /* Sector size of Serial NOR */
uint8_t ipcmd_serial_clkfreq; /* Clock frequency for IP command */ uint8_t ipcmd_serial_clkfreq; /* Clock frequency for IP command */
uint8_t is_uniform_blocksize; /* Sector/Block size is the same */ uint8_t is_uniform_blocksize; /* Sector/Block size is the same */
uint8_t reserved0[2]; /* Reserved for future use */ uint8_t reserved0[2]; /* Reserved for future use */
uint8_t serial_nor_type; /* Serial NOR Flash type: 0/1/2/3 */ uint8_t serial_nor_type; /* Serial NOR Flash type: 0/1/2/3 */
uint8_t need_exit_nocmdmode; /* Need to exit NoCmd mode before other IP command */ uint8_t need_exit_nocmdmode; /* Need to exit NoCmd mode before other IP command */
uint8_t halfclk_for_nonreadcmd; /* Half the Serial Clock for non-read command: true/false */ uint8_t halfclk_for_nonreadcmd; /* Half the Serial Clock for non-read command: true/false */
uint8_t need_restore_nocmdmode; /* Need to Restore NoCmd mode after IP command execution */ uint8_t need_restore_nocmdmode; /* Need to Restore NoCmd mode after IP command execution */
uint32_t blocksize; /* Block size */ uint32_t blocksize; /* Block size */
uint32_t reserve2[11]; /* Reserved for future use */ uint32_t reserve2[11]; /* Reserved for future use */
}; };
#endif /* __BOARDS_ARM_IMXRT_IMXRT1060_EVK_SRC_IMXRT_FLEXSPI_NOR_FLASH_H */ #endif /* __BOARDS_ARM_IMXRT_IMXRT1060_EVK_SRC_IMXRT_FLEXSPI_NOR_FLASH_H */

4
boards/arm/lpc17xx_40xx/pnev5180b/src/lpc17_40_leds.c
View File

@ -39,6 +39,10 @@
#ifdef CONFIG_ARCH_LEDS #ifdef CONFIG_ARCH_LEDS
/****************************************************************************
* Public Functions
****************************************************************************/
/**************************************************************************** /****************************************************************************
* Name: board_autoled_initialize * Name: board_autoled_initialize
****************************************************************************/ ****************************************************************************/

11
boards/arm/stm32/hymini-stm32v/include/board.h
View File

@ -31,13 +31,15 @@
* Pre-processor Definitions * Pre-processor Definitions
****************************************************************************/ ****************************************************************************/
/* Clocking *************************************************************************/ /* Clocking *****************************************************************/
/* On-board crystal frequency is 8MHz (HSE) */ /* On-board crystal frequency is 8MHz (HSE) */
#define STM32_BOARD_XTAL 8000000ul #define STM32_BOARD_XTAL 8000000ul
/* PLL source is HSE/1, PLL multipler is 9: PLL frequency is 8MHz (XTAL) x 9 = 72MHz */ /* PLL source is HSE/1, PLL multipler is 9:
* PLL frequency is 8MHz (XTAL) x 9 = 72MHz
*/
#define STM32_CFGR_PLLSRC RCC_CFGR_PLLSRC #define STM32_CFGR_PLLSRC RCC_CFGR_PLLSRC
#define STM32_CFGR_PLLXTPRE 0 #define STM32_CFGR_PLLXTPRE 0
@ -86,7 +88,8 @@
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx /* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
* otherwise frequency is 2xAPBx. * otherwise frequency is 2xAPBx.
* Note: TIM1,8 are on APB2, others on APB1 */ * Note: TIM1,8 are on APB2, others on APB1
*/
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY #define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM2_FREQUENCY STM32_HCLK_FREQUENCY #define BOARD_TIM2_FREQUENCY STM32_HCLK_FREQUENCY
@ -127,7 +130,7 @@
# define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT) # define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif #endif
/* LED definitions ******************************************************************/ /* LED definitions **********************************************************/
/* The board has 2 LEDs that we will encode as: */ /* The board has 2 LEDs that we will encode as: */
#define LED_STARTED 0 /* No LEDs */ #define LED_STARTED 0 /* No LEDs */

21
boards/arm/stm32/hymini-stm32v/src/stm32_boot.c
View File

@ -41,16 +41,19 @@
* Name: stm32_boardinitialize * Name: stm32_boardinitialize
* *
* Description: * Description:
* All STM32 architectures must provide the following entry point. This entry point * All STM32 architectures must provide the following entry point. This
* is called early in the initialization -- after all memory has been configured * entry point is called early in the initialization -- after all memory
* and mapped but before any devices have been initialized. * has been configured and mapped but before any devices have been
* initialized.
* *
****************************************************************************/ ****************************************************************************/
void stm32_boardinitialize(void) void stm32_boardinitialize(void)
{ {
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function /* Configure SPI chip selects if
* stm32_spidev_initialize() has been brought into the link. * 1) SPI is not disabled, and
* 2) the weak function stm32_spidev_initialize() has been brought into
* the link.
*/ */
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) #if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2)
@ -60,10 +63,10 @@ void stm32_boardinitialize(void)
} }
#endif #endif
/* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
* disabled, and 3) the weak function stm32_usbinitialize() has been brought * disabled, and 3) the weak function stm32_usbinitialize() has been
* into the build. * brought into the build.
*/ */
#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB) #if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)
if (stm32_usbinitialize) if (stm32_usbinitialize)

57
boards/arm/stm32/hymini-stm32v/src/stm32_leds.c
View File

@ -124,29 +124,29 @@
static const uint16_t g_ledbits[8] = static const uint16_t g_ledbits[8] =
{ {
(LED_STARTED_ON_SETBITS | LED_STARTED_ON_CLRBITS | LED_STARTED_OFF_SETBITS (LED_STARTED_ON_SETBITS | LED_STARTED_ON_CLRBITS |
| LED_STARTED_OFF_CLRBITS), LED_STARTED_OFF_SETBITS | LED_STARTED_OFF_CLRBITS),
(LED_HEAPALLOCATE_ON_SETBITS | LED_HEAPALLOCATE_ON_CLRBITS (LED_HEAPALLOCATE_ON_SETBITS | LED_HEAPALLOCATE_ON_CLRBITS |
| LED_HEAPALLOCATE_OFF_SETBITS | LED_HEAPALLOCATE_OFF_CLRBITS), LED_HEAPALLOCATE_OFF_SETBITS | LED_HEAPALLOCATE_OFF_CLRBITS),
(LED_IRQSENABLED_ON_SETBITS | LED_IRQSENABLED_ON_CLRBITS (LED_IRQSENABLED_ON_SETBITS | LED_IRQSENABLED_ON_CLRBITS |
| LED_IRQSENABLED_OFF_SETBITS | LED_IRQSENABLED_OFF_CLRBITS), LED_IRQSENABLED_OFF_SETBITS | LED_IRQSENABLED_OFF_CLRBITS),
(LED_STACKCREATED_ON_SETBITS | LED_STACKCREATED_ON_CLRBITS (LED_STACKCREATED_ON_SETBITS | LED_STACKCREATED_ON_CLRBITS |
| LED_STACKCREATED_OFF_SETBITS | LED_STACKCREATED_OFF_CLRBITS), LED_STACKCREATED_OFF_SETBITS | LED_STACKCREATED_OFF_CLRBITS),
(LED_INIRQ_ON_SETBITS | LED_INIRQ_ON_CLRBITS | LED_INIRQ_OFF_SETBITS (LED_INIRQ_ON_SETBITS | LED_INIRQ_ON_CLRBITS |
| LED_INIRQ_OFF_CLRBITS), LED_INIRQ_OFF_SETBITS | LED_INIRQ_OFF_CLRBITS),
(LED_SIGNAL_ON_SETBITS | LED_SIGNAL_ON_CLRBITS | LED_SIGNAL_OFF_SETBITS (LED_SIGNAL_ON_SETBITS | LED_SIGNAL_ON_CLRBITS |
| LED_SIGNAL_OFF_CLRBITS), LED_SIGNAL_OFF_SETBITS | LED_SIGNAL_OFF_CLRBITS),
(LED_ASSERTION_ON_SETBITS | LED_ASSERTION_ON_CLRBITS | LED_ASSERTION_OFF_SETBITS (LED_ASSERTION_ON_SETBITS | LED_ASSERTION_ON_CLRBITS |
| LED_ASSERTION_OFF_CLRBITS), LED_ASSERTION_OFF_SETBITS | LED_ASSERTION_OFF_CLRBITS),
(LED_PANIC_ON_SETBITS | LED_PANIC_ON_CLRBITS | LED_PANIC_OFF_SETBITS (LED_PANIC_ON_SETBITS | LED_PANIC_ON_CLRBITS |
| LED_PANIC_OFF_CLRBITS) LED_PANIC_OFF_SETBITS | LED_PANIC_OFF_CLRBITS)
}; };
/**************************************************************************** /****************************************************************************
@ -156,27 +156,27 @@ static const uint16_t g_ledbits[8] =
static inline void led_clrbits(unsigned int clrbits) static inline void led_clrbits(unsigned int clrbits)
{ {
if ((clrbits & HYMINI_STM32_LED1) != 0) if ((clrbits & HYMINI_STM32_LED1) != 0)
{ {
stm32_gpiowrite(GPIO_LED1, false); stm32_gpiowrite(GPIO_LED1, false);
} }
if ((clrbits & HYMINI_STM32_LED2) != 0) if ((clrbits & HYMINI_STM32_LED2) != 0)
{ {
stm32_gpiowrite(GPIO_LED2, false); stm32_gpiowrite(GPIO_LED2, false);
} }
} }
static inline void led_setbits(unsigned int setbits) static inline void led_setbits(unsigned int setbits)
{ {
if ((setbits & HYMINI_STM32_LED1) != 0) if ((setbits & HYMINI_STM32_LED1) != 0)
{ {
stm32_gpiowrite(GPIO_LED1, true); stm32_gpiowrite(GPIO_LED1, true);
} }
if ((setbits & HYMINI_STM32_LED2) != 0) if ((setbits & HYMINI_STM32_LED2) != 0)
{ {
stm32_gpiowrite(GPIO_LED2, true); stm32_gpiowrite(GPIO_LED2, true);
} }
} }
static void led_setonoff(unsigned int bits) static void led_setonoff(unsigned int bits)
@ -197,6 +197,7 @@ static void led_setonoff(unsigned int bits)
void board_autoled_initialize(void) void board_autoled_initialize(void)
{ {
/* Configure LED1 & LED2 GPIOs for output */ /* Configure LED1 & LED2 GPIOs for output */
stm32_configgpio(GPIO_LED1); stm32_configgpio(GPIO_LED1);
stm32_configgpio(GPIO_LED2); stm32_configgpio(GPIO_LED2);
} }

57
boards/arm/stm32/hymini-stm32v/src/stm32_spi.c
View File

@ -47,7 +47,8 @@
* Name: stm32_spidev_initialize * Name: stm32_spidev_initialize
* *
* Description: * Description:
* Called to configure SPI chip select GPIO pins for the HY-MiniSTM32 board. * Called to configure SPI chip select GPIO pins for the HY-MiniSTM32
* board.
* *
****************************************************************************/ ****************************************************************************/
@ -61,6 +62,7 @@ void stm32_spidev_initialize(void)
#ifdef CONFIG_STM32_SPI1 #ifdef CONFIG_STM32_SPI1
/* Configure the SPI-based touch screen CS GPIO */ /* Configure the SPI-based touch screen CS GPIO */
spiinfo("Configure GPIO for SPI1/CS\n"); spiinfo("Configure GPIO for SPI1/CS\n");
stm32_configgpio(GPIO_TS_CS); stm32_configgpio(GPIO_TS_CS);
#endif #endif
@ -70,38 +72,41 @@ void stm32_spidev_initialize(void)
* Name: stm32_spi1/2/3select and stm32_spi1/2/3status * Name: stm32_spi1/2/3select and stm32_spi1/2/3status
* *
* Description: * Description:
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be * The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status
* provided by board-specific logic. They are implementations of the select * must be provided by board-specific logic. They are implementations of
* and status methods of the SPI interface defined by struct spi_ops_s (see * the select and status methods of the SPI interface defined by struct
* include/nuttx/spi/spi.h). All other methods (including stm32_spibus_initialize()) * spi_ops_s (see include/nuttx/spi/spi.h). All other methods (including
* are provided by common STM32 logic. To use this common SPI logic on your * stm32_spibus_initialize()) are provided by common STM32 logic.
* board: * To use this common SPI logic on your board:
* *
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select * 1. Provide logic in stm32_boardinitialize() to configure SPI chip select
* pins. * pins.
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your * 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions
* board-specific logic. These functions will perform chip selection and * in your board-specific logic. These functions will perform chip
* status operations using GPIOs in the way your board is configured. * selection and status operations using GPIOs in the way your board is
* 3. Add a calls to stm32_spibus_initialize() in your low level application * configured.
* initialization logic * 3. Add a calls to stm32_spibus_initialize() in your low level
* 4. The handle returned by stm32_spibus_initialize() may then be used to bind the * application initialization logic
* SPI driver to higher level logic (e.g., calling * 4. The handle returned by stm32_spibus_initialize() may then be used to
* bind the SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver). * the SPI MMC/SD driver).
* *
****************************************************************************/ ****************************************************************************/
#ifdef CONFIG_STM32_SPI1 #ifdef CONFIG_STM32_SPI1
void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected) void stm32_spi1select(FAR struct spi_dev_s *dev,
uint32_t devid, bool selected)
{ {
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); spiinfo("devid: %d CS: %s\n",
(int)devid, selected ? "assert" : "de-assert");
if (devid == SPIDEV_TOUCHSCREEN(0)) if (devid == SPIDEV_TOUCHSCREEN(0))
{ {
/* Set the GPIO low to select and high to de-select */ /* Set the GPIO low to select and high to de-select */
stm32_gpiowrite(GPIO_TS_CS, !selected); stm32_gpiowrite(GPIO_TS_CS, !selected);
} }
} }
uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, uint32_t devid) uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
@ -111,9 +116,11 @@ uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
#endif #endif
#ifdef CONFIG_STM32_SPI2 #ifdef CONFIG_STM32_SPI2
void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected) void stm32_spi2select(FAR struct spi_dev_s *dev,
uint32_t devid, bool selected)
{ {
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); spiinfo("devid: %d CS: %s\n",
(int)devid, selected ? "assert" : "de-assert");
} }
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, uint32_t devid) uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
@ -123,9 +130,11 @@ uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
#endif #endif
#ifdef CONFIG_STM32_SPI3 #ifdef CONFIG_STM32_SPI3
void stm32_spi3select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected) void stm32_spi3select(FAR struct spi_dev_s *dev,
uint32_t devid, bool selected)
{ {
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); spiinfo("devid: %d CS: %s\n",
(int)devid, selected ? "assert" : "de-assert");
} }
uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, uint32_t devid) uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, uint32_t devid)

18
boards/arm/stm32/hymini-stm32v/src/stm32_ts.c
View File

@ -48,9 +48,10 @@
* Private Function Prototypes * Private Function Prototypes
****************************************************************************/ ****************************************************************************/
static int hymini_ts_irq_attach(FAR struct ads7843e_config_s *state, xcpt_t isr); static int hymini_ts_irq_attach(FAR struct ads7843e_config_s *state,
xcpt_t isr);
static void hymini_ts_irq_enable(FAR struct ads7843e_config_s *state, static void hymini_ts_irq_enable(FAR struct ads7843e_config_s *state,
bool enable); bool enable);
static void hymini_ts_irq_clear(FAR struct ads7843e_config_s *state); static void hymini_ts_irq_clear(FAR struct ads7843e_config_s *state);
static bool hymini_ts_busy(FAR struct ads7843e_config_s *state); static bool hymini_ts_busy(FAR struct ads7843e_config_s *state);
static bool hymini_ts_pendown(FAR struct ads7843e_config_s *state); static bool hymini_ts_pendown(FAR struct ads7843e_config_s *state);
@ -64,10 +65,10 @@ static FAR struct ads7843e_config_s ts_cfg =
.frequency = CONFIG_ADS7843E_FREQUENCY, .frequency = CONFIG_ADS7843E_FREQUENCY,
.attach = hymini_ts_irq_attach, .attach = hymini_ts_irq_attach,
.enable=hymini_ts_irq_enable, .enable = hymini_ts_irq_enable,
.clear=hymini_ts_irq_clear, .clear = hymini_ts_irq_clear,
.busy = hymini_ts_busy, .busy = hymini_ts_busy,
.pendown=hymini_ts_pendown .pendown = hymini_ts_pendown
}; };
static xcpt_t tc_isr; static xcpt_t tc_isr;
@ -78,7 +79,8 @@ static xcpt_t tc_isr;
/* Attach the ADS7843E interrupt handler to the GPIO interrupt */ /* Attach the ADS7843E interrupt handler to the GPIO interrupt */
static int hymini_ts_irq_attach(FAR struct ads7843e_config_s *state, xcpt_t isr) static int hymini_ts_irq_attach(FAR struct ads7843e_config_s *state,
xcpt_t isr)
{ {
iinfo("hymini_ts_irq_attach\n"); iinfo("hymini_ts_irq_attach\n");
@ -102,10 +104,11 @@ static void hymini_ts_irq_enable(FAR struct ads7843e_config_s *state,
static void hymini_ts_irq_clear(FAR struct ads7843e_config_s *state) static void hymini_ts_irq_clear(FAR struct ads7843e_config_s *state)
{ {
// FIXME Nothing to do ? /* FIXME Nothing to do ? */
} }
/* As the busy line is not connected, we just wait a little bit here */ /* As the busy line is not connected, we just wait a little bit here */
static bool hymini_ts_busy(FAR struct ads7843e_config_s *state) static bool hymini_ts_busy(FAR struct ads7843e_config_s *state)
{ {
up_mdelay(50); up_mdelay(50);
@ -113,6 +116,7 @@ static bool hymini_ts_busy(FAR struct ads7843e_config_s *state)
} }
/* Return the state of the pen down GPIO input */ /* Return the state of the pen down GPIO input */
static bool hymini_ts_pendown(FAR struct ads7843e_config_s *state) static bool hymini_ts_pendown(FAR struct ads7843e_config_s *state)
{ {
bool pin_value = stm32_gpioread(GPIO_TS_IRQ); bool pin_value = stm32_gpioread(GPIO_TS_IRQ);

22
boards/arm/stm32/nucleo-f410rb/src/stm32_adc.c
View File

@ -53,27 +53,40 @@
/**************************************************************************** /****************************************************************************
* Private Data * Private Data
****************************************************************************/ ****************************************************************************/
/* Identifying number of each ADC channel. */ /* Identifying number of each ADC channel. */
#ifdef CONFIG_STM32_ADC1_DMA #ifdef CONFIG_STM32_ADC1_DMA
/* ADC_IN0 and ADC_IN1 */ /* ADC_IN0 and ADC_IN1 */
static const uint8_t g_adc1_chanlist[ADC1_NCHANNELS] = {9, 8}; static const uint8_t g_adc1_chanlist[ADC1_NCHANNELS] =
{
9, 8
};
/* Configurations of pins used byte each ADC channels */ /* Configurations of pins used byte each ADC channels */
static const uint32_t g_adc1_pinlist[ADC1_NCHANNELS] = {GPIO_ADC1_IN9, GPIO_ADC1_IN8}; static const uint32_t g_adc1_pinlist[ADC1_NCHANNELS] =
{
GPIO_ADC1_IN9, GPIO_ADC1_IN8
};
#else #else
/* Without DMA, only a single channel can be supported */ /* Without DMA, only a single channel can be supported */
/* ADC_IN0 */ /* ADC_IN0 */
static const uint8_t g_adc1_chanlist[ADC1_NCHANNELS] = {9}; static const uint8_t g_adc1_chanlist[ADC1_NCHANNELS] =
{
9
};
/* Configurations of pins used byte each ADC channels */ /* Configurations of pins used byte each ADC channels */
static const uint32_t g_adc1_pinlist[ADC1_NCHANNELS] = {GPIO_ADC1_IN9}; static const uint32_t g_adc1_pinlist[ADC1_NCHANNELS] =
{
GPIO_ADC1_IN9
};
#endif /* CONFIG_STM32_ADC1_DMA */ #endif /* CONFIG_STM32_ADC1_DMA */
@ -96,6 +109,7 @@ int stm32_adc_setup(void)
int i; int i;
/* Configure the pins as analog inputs for the selected channels */ /* Configure the pins as analog inputs for the selected channels */
syslog(LOG_ERR, "stm32_adc_setup configuration: %d\n", ADC1_NCHANNELS); syslog(LOG_ERR, "stm32_adc_setup configuration: %d\n", ADC1_NCHANNELS);
for (i = 0; i < ADC1_NCHANNELS; i++) for (i = 0; i < ADC1_NCHANNELS; i++)

16
boards/arm/stm32/nucleo-f410rb/src/stm32_boot.c
View File

@ -49,9 +49,10 @@
* Name: stm32_boardinitialize * Name: stm32_boardinitialize
* *
* Description: * Description:
* All STM32 architectures must provide the following entry point. This entry point * All STM32 architectures must provide the following entry point. This
* is called early in the initialization -- after all memory has been configured * entry point is called early in the initialization -- after all memory
* and mapped but before any devices have been initialized. * has been configured and mapped but before any devices have been
* initialized.
* *
****************************************************************************/ ****************************************************************************/
@ -76,10 +77,11 @@ void stm32_boardinitialize(void)
* Description: * Description:
* If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional * If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional
* initialization call will be performed in the boot-up sequence to a * initialization call will be performed in the boot-up sequence to a
* function called board_late_initialize(). board_late_initialize() will be * function called board_late_initialize(). board_late_initialize() will
* called immediately after up_initialize() is called and just before the * be called immediately after up_initialize() is called and just before
* initial application is started. This additional initialization phase * the initial application is started. This additional initialization
* may be used, for example, to initialize board-specific device drivers. * phase may be used, for example, to initialize board-specific device
* drivers.
* *
****************************************************************************/ ****************************************************************************/

67
boards/arm/stm32/olimex-stm32-e407/include/board.h
View File

@ -42,28 +42,31 @@
* Pre-processor Definitions * Pre-processor Definitions
****************************************************************************/ ****************************************************************************/
/* Clocking *************************************************************************/ /* Clocking *****************************************************************/
/* The Olimex-STM32-E407 board features a 12MHz crystal and /* The Olimex-STM32-E407 board features a 12MHz crystal and
* a 32kHz RTC backup crystal. * a 32kHz RTC backup crystal.
* *
* This is the canonical configuration: * This is the canonical configuration:
* System Clock source : PLL (HSE) * System Clock source : PLL (HSE)
* SYSCLK(Hz) : 168000000 Determined by PLL configuration * SYSCLK(Hz) : 168000000 Determined by PLL configuration
* HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE) * HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE)
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE) * AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1) * APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2) * APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
* HSE Frequency(Hz) : 8000000 (STM32_BOARD_XTAL) * HSE Frequency(Hz) : 8000000 (STM32_BOARD_XTAL)
* PLLM : 8 (STM32_PLLCFG_PLLM) * PLLM : 8 (STM32_PLLCFG_PLLM)
* PLLN : 336 (STM32_PLLCFG_PLLN) * PLLN : 336 (STM32_PLLCFG_PLLN)
* PLLP : 2 (STM32_PLLCFG_PLLP) * PLLP : 2 (STM32_PLLCFG_PLLP)
* PLLQ : 7 (STM32_PLLCFG_PLLQ) * PLLQ : 7 (STM32_PLLCFG_PLLQ)
* Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK * Main regulator output
* Flash Latency(WS) : 5 * voltage : Scale1 mode Needed for high speed SYSCLK
* Prefetch Buffer : OFF * Flash Latency(WS) : 5
* Instruction cache : ON * Prefetch Buffer : OFF
* Data cache : ON * Instruction cache : ON
* Require 48MHz for USB OTG FS, : Enabled * Data cache : ON
* Require 48MHz for : Enabled
* USB OTG FS,
* SDIO and RNG clock * SDIO and RNG clock
*/ */
@ -157,9 +160,11 @@
#define BOARD_TIM7_FREQUENCY STM32_HCLK_FREQUENCY #define BOARD_TIM7_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY #define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY
/* LED definitions ******************************************************************/ /* LED definitions **********************************************************/
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the status LED in any
* way. The following definitions are used to access individual LEDs. /* If CONFIG_ARCH_LEDS is not defined, then the user can control the status
* LED in any way.
* The following definitions are used to access individual LEDs.
*/ */
/* LED index values for use with board_userled() */ /* LED index values for use with board_userled() */
@ -171,8 +176,9 @@
#define BOARD_LED_STATUS_BIT (1 << BOARD_LED1) #define BOARD_LED_STATUS_BIT (1 << BOARD_LED1)
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the status LED of the /* If CONFIG_ARCH_LEDs is defined, then NuttX will control the status LED of
* Olimex STM32-E405. The following definitions describe how NuttX controls the LEDs: * the Olimex STM32-E405.
* The following definitions describe how NuttX controls the LEDs:
*/ */
#define LED_STARTED 0 /* LED_STATUS on */ #define LED_STARTED 0 /* LED_STATUS on */
@ -184,7 +190,8 @@
#define LED_ASSERTION 6 /* LED_STATUS off */ #define LED_ASSERTION 6 /* LED_STATUS off */
#define LED_PANIC 7 /* LED_STATUS blinking */ #define LED_PANIC 7 /* LED_STATUS blinking */
/* Button definitions ***************************************************************/ /* Button definitions *******************************************************/
/* The Olimex STM32-E405 supports one buttons: */ /* The Olimex STM32-E405 supports one buttons: */
#define BUTTON_BUT 0 #define BUTTON_BUT 0
@ -192,7 +199,7 @@
#define BUTTON_BUT_BIT (1 << BUTTON_BUT) #define BUTTON_BUT_BIT (1 << BUTTON_BUT)
/* Alternate function pin selections ************************************************/ /* Alternate function pin selections ****************************************/
/* USART1 */ /* USART1 */
@ -225,10 +232,10 @@
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_2 /* PB5 */ #define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_2 /* PB5 */
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /* PA6 */ #define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /* PA6 */
/* Ethernet *************************************************************************/ /* Ethernet *****************************************************************/
#if defined(CONFIG_STM32_ETHMAC) #if defined(CONFIG_STM32_ETHMAC)
/* RMII interface to the LAN8710 PHY (works with LAN8720 driver)*/ /* RMII interface to the LAN8710 PHY (works with LAN8720 driver) */
# ifndef CONFIG_STM32_RMII # ifndef CONFIG_STM32_RMII
# error CONFIG_STM32_RMII must be defined # error CONFIG_STM32_RMII must be defined
@ -242,9 +249,9 @@
/* Pin disambiguation */ /* Pin disambiguation */
# define GPIO_ETH_MII_COL GPIO_ETH_MII_COL_1 /* PA3 */ # define GPIO_ETH_MII_COL GPIO_ETH_MII_COL_1 /* PA3 */
# define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2 /* PG13 */ # define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2 /* PG13 */
# define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2 /* PG14 */ # define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2 /* PG14 */
# define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_2 /* PG11 */ # define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_2 /* PG11 */
#endif #endif

19
boards/arm/stm32/stm32_tiny/src/stm32_boot.c
View File

@ -48,9 +48,10 @@
* Name: stm32_boardinitialize * Name: stm32_boardinitialize
* *
* Description: * Description:
* All STM32 architectures must provide the following entry point. This entry point * All STM32 architectures must provide the following entry point. This
* is called early in the initialization -- after all memory has been configured * entry point is called early in the initialization -- after all memory
* and mapped but before any devices have been initialized. * has been configured and mapped but before any devices have been
* initialized.
* *
****************************************************************************/ ****************************************************************************/
@ -62,18 +63,18 @@ void stm32_boardinitialize(void)
board_autoled_initialize(); board_autoled_initialize();
#endif #endif
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak
* stm32_spidev_initialize() has been brought into the link. * function stm32_spidev_initialize() has been brought into the link.
*/ */
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) #if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2)
stm32_spidev_initialize(); stm32_spidev_initialize();
#endif #endif
/* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
* disabled, and 3) the weak function stm32_usbinitialize() has been brought * disabled, and 3) the weak function stm32_usbinitialize() has been
* into the build. * brought into the build.
*/ */
#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB) #if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)
stm32_usbinitialize(); stm32_usbinitialize();

12
boards/arm/stm32/stm32_tiny/src/stm32_leds.c
View File

@ -59,6 +59,7 @@ static inline void set_led(bool v)
void board_autoled_initialize(void) void board_autoled_initialize(void)
{ {
/* Configure LED GPIO for output */ /* Configure LED GPIO for output */
stm32_configgpio(GPIO_LED); stm32_configgpio(GPIO_LED);
} }
@ -68,16 +69,21 @@ void board_autoled_initialize(void)
void board_autoled_on(int led) void board_autoled_on(int led)
{ {
ledinfo("board_autoled_on(%d)\n",led); ledinfo("board_autoled_on(%d)\n", led);
switch (led) switch (led)
{ {
case LED_STARTED: case LED_STARTED:
case LED_HEAPALLOCATE: case LED_HEAPALLOCATE:
/* As the board provides only one soft controllable LED, we simply turn it on when the board boots */ /* As the board provides only one soft controllable LED,
* we simply turn it on when the board boots
*/
set_led(true); set_led(true);
break; break;
case LED_PANIC: case LED_PANIC:
/* For panic state, the LED is blinking */ /* For panic state, the LED is blinking */
set_led(true); set_led(true);
break; break;
} }
@ -92,7 +98,9 @@ void board_autoled_off(int led)
switch (led) switch (led)
{ {
case LED_PANIC: case LED_PANIC:
/* For panic state, the LED is blinking */ /* For panic state, the LED is blinking */
set_led(false); set_led(false);
break; break;
} }

41
boards/arm/stm32/stm32_tiny/src/stm32_spi.c
View File

@ -46,7 +46,8 @@
* Name: stm32_spidev_initialize * Name: stm32_spidev_initialize
* *
* Description: * Description:
* Called to configure SPI chip select GPIO pins for the HY-MiniSTM32 board. * Called to configure SPI chip select GPIO pins for the HY-MiniSTM32
* board.
* *
****************************************************************************/ ****************************************************************************/
@ -72,29 +73,31 @@ void stm32_spidev_initialize(void)
* Name: stm32_spi1/2select and stm32_spi1/2status * Name: stm32_spi1/2select and stm32_spi1/2status
* *
* Description: * Description:
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be * The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status
* provided by board-specific logic. They are implementations of the select * must be provided by board-specific logic. They are implementations of
* and status methods of the SPI interface defined by struct spi_ops_s (see * the select and status methods of the SPI interface defined by struct
* include/nuttx/spi/spi.h). All other methods (including stm32_spibus_initialize()) * spi_ops_s (see include/nuttx/spi/spi.h). All other methods (including
* are provided by common STM32 logic. To use this common SPI logic on your * stm32_spibus_initialize()) are provided by common STM32 logic.
* board: * To use this common SPI logic on your board:
* *
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select * 1. Provide logic in stm32_boardinitialize() to configure SPI chip
* pins. * select pins.
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your * 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions
* board-specific logic. These functions will perform chip selection and * in your board-specific logic. These functions will perform chip
* status operations using GPIOs in the way your board is configured. * selection and status operations using GPIOs in the way your board is
* 3. Add a calls to stm32_spibus_initialize() in your low level application * configured.
* initialization logic * 3. Add a calls to stm32_spibus_initialize() in your low level
* 4. The handle returned by stm32_spibus_initialize() may then be used to bind the * application initialization logic
* SPI driver to higher level logic (e.g., calling * 4. The handle returned by stm32_spibus_initialize() may then be used to
* bind the SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver). * the SPI MMC/SD driver).
* *
****************************************************************************/ ****************************************************************************/
#ifdef CONFIG_STM32_SPI1 #ifdef CONFIG_STM32_SPI1
void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected) void stm32_spi1select(FAR struct spi_dev_s *dev,
uint32_t devid, bool selected)
{ {
} }
@ -105,7 +108,8 @@ uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
#endif #endif
#ifdef CONFIG_STM32_SPI2 #ifdef CONFIG_STM32_SPI2
void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected) void stm32_spi2select(FAR struct spi_dev_s *dev,
uint32_t devid, bool selected)
{ {
switch (devid) switch (devid)
{ {
@ -136,6 +140,7 @@ uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
default: default:
break; break;
} }
return status; return status;
} }

22
boards/arm/stm32/stm32_tiny/src/stm32_usbdev.c
View File

@ -61,6 +61,7 @@ void stm32_usbinitialize(void)
uinfo("called\n"); uinfo("called\n");
/* USB Soft Connect Pullup */ /* USB Soft Connect Pullup */
stm32_configgpio(GPIO_USB_PULLUP); stm32_configgpio(GPIO_USB_PULLUP);
} }
@ -68,11 +69,13 @@ void stm32_usbinitialize(void)
* Name: stm32_usbpullup * Name: stm32_usbpullup
* *
* Description: * Description:
* If USB is supported and the board supports a pullup via GPIO (for USB software * If USB is supported and the board supports a pullup via GPIO (for USB
* connect and disconnect), then the board software must provide stm32_pullup. * software connect and disconnect), then the board software must provide
* See include/nuttx/usb/usbdev.h for additional description of this method. * stm32_pullup.
* Alternatively, if no pull-up GPIO the following EXTERN can be redefined to be * See include/nuttx/usb/usbdev.h for additional description of this
* NULL. * method.
* Alternatively, if no pull-up GPIO the following EXTERN can be redefined
* to be NULL.
* *
****************************************************************************/ ****************************************************************************/
@ -87,10 +90,11 @@ int stm32_usbpullup(FAR struct usbdev_s *dev, bool enable)
* Name: stm32_usbsuspend * Name: stm32_usbsuspend
* *
* Description: * Description:
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is * Board logic must provide the stm32_usbsuspend logic if the USBDEV
* used. This function is called whenever the USB enters or leaves suspend mode. * driver is used. This function is called whenever the USB enters or
* This is an opportunity for the board logic to shutdown clocks, power, etc. * leaves suspend mode.
* while the USB is suspended. * This is an opportunity for the board logic to shutdown clocks, power,
* etc. while the USB is suspended.
* *
****************************************************************************/ ****************************************************************************/

5
boards/arm/stm32/stm32f103-minimum/src/stm32_autoleds.c
View File

@ -69,12 +69,13 @@ void board_autoled_initialize(void)
void board_autoled_on(int led) void board_autoled_on(int led)
{ {
ledinfo("board_autoled_on(%d)\n",led); ledinfo("board_autoled_on(%d)\n", led);
switch (led) switch (led)
{ {
case LED_STARTED: case LED_STARTED:
case LED_HEAPALLOCATE: case LED_HEAPALLOCATE:
/* As the board provides only one soft controllable LED, we simply /* As the board provides only one soft controllable LED, we simply
* turn it on when the board boots. * turn it on when the board boots.
*/ */
@ -83,6 +84,7 @@ void board_autoled_on(int led)
break; break;
case LED_PANIC: case LED_PANIC:
/* For panic state, the LED is blinking */ /* For panic state, the LED is blinking */
set_led(true); set_led(true);
@ -99,6 +101,7 @@ void board_autoled_off(int led)
switch (led) switch (led)
{ {
case LED_PANIC: case LED_PANIC:
/* For panic state, the LED is blinking */ /* For panic state, the LED is blinking */
set_led(false); set_led(false);

38
boards/arm/stm32/stm32f103-minimum/src/stm32_boot.c
View File

@ -40,9 +40,10 @@
* Name: stm32_boardinitialize * Name: stm32_boardinitialize
* *
* Description: * Description:
* All STM32 architectures must provide the following entry point. This entry point * All STM32 architectures must provide the following entry point. This
* is called early in the initialization -- after all memory has been configured * entry point is called early in the initialization -- after all memory
* and mapped but before any devices have been initialized. * has been configured and mapped but before any devices have been
* initialized.
* *
****************************************************************************/ ****************************************************************************/
@ -54,18 +55,22 @@ void stm32_boardinitialize(void)
board_autoled_initialize(); board_autoled_initialize();
#endif #endif
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function /* Configure SPI chip selects if
* stm32_spidev_initialize() has been brought into the link. * 1) SPI is not disabled, and
* 2) the weak function stm32_spidev_initialize() has been brought into
* the link.
*/ */
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) #if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2)
stm32_spidev_initialize(); stm32_spidev_initialize();
#endif #endif
/* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not /* Initialize USB is
* disabled, and 3) the weak function stm32_usbinitialize() has been brought * 1) USBDEV is selected,
* into the build. * 2) the USB controller is not disabled, and
*/ * 3) the weak function stm32_usbinitialize() has been brought
* into the build.
*/
#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB) #if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)
stm32_usbinitialize(); stm32_usbinitialize();
@ -76,11 +81,12 @@ void stm32_boardinitialize(void)
* Name: board_late_initialize * Name: board_late_initialize
* *
* Description: * Description:
* If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional initialization call * If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional
* will be performed in the boot-up sequence to a function called * initialization call will be performed in the boot-up sequence to a
* board_late_initialize(). board_late_initialize() will be called immediately after * function called board_late_initialize(). board_late_initialize()
* up_initialize() is called and just before the initial application is started. * will be called immediately after up_initialize() is called and just
* This additional initialization phase may be used, for example, to initialize * before the initial application is started. This additional
* initialization phase may be used, for example, to initialize
* board-specific device drivers. * board-specific device drivers.
* *
****************************************************************************/ ****************************************************************************/
@ -89,7 +95,9 @@ void stm32_boardinitialize(void)
void board_late_initialize(void) void board_late_initialize(void)
{ {
#ifndef CONFIG_LIB_BOARDCTL #ifndef CONFIG_LIB_BOARDCTL
/* Perform board initialization here instead of from the board_app_initialize(). */ /* Perform board initialization here instead of from the
* board_app_initialize().
*/
stm32_bringup(); stm32_bringup();
#endif #endif

32
boards/arm/stm32/stm32f103-minimum/src/stm32_spi.c
View File

@ -46,7 +46,8 @@
* Name: stm32_spidev_initialize * Name: stm32_spidev_initialize
* *
* Description: * Description:
* Called to configure SPI chip select GPIO pins for the HY-MiniSTM32 board. * Called to configure SPI chip select GPIO pins for the HY-MiniSTM32
* board.
* *
****************************************************************************/ ****************************************************************************/
@ -99,22 +100,23 @@ void stm32_spidev_initialize(void)
* Name: stm32_spi1/2select and stm32_spi1/2status * Name: stm32_spi1/2select and stm32_spi1/2status
* *
* Description: * Description:
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be * The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status
* provided by board-specific logic. They are implementations of the select * must be provided by board-specific logic. They are implementations of
* and status methods of the SPI interface defined by struct spi_ops_s (see * the select and status methods of the SPI interface defined by struct
* include/nuttx/spi/spi.h). All other methods (including stm32_spibus_initialize()) * spi_ops_s (see include/nuttx/spi/spi.h). All other methods (including
* are provided by common STM32 logic. To use this common SPI logic on your * stm32_spibus_initialize()) are provided by common STM32 logic.
* board: * To use this common SPI logic on your board:
* *
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select * 1. Provide logic in stm32_boardinitialize() to configure SPI chip select
* pins. * pins.
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your * 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions
* board-specific logic. These functions will perform chip selection and * in your board-specific logic. These functions will perform chip
* status operations using GPIOs in the way your board is configured. * selection and status operations using GPIOs in the way your board is
* 3. Add a calls to stm32_spibus_initialize() in your low level application * configured.
* initialization logic * 3. Add a calls to stm32_spibus_initialize() in your low level
* 4. The handle returned by stm32_spibus_initialize() may then be used to bind the * application initialization logic
* SPI driver to higher level logic (e.g., calling * 4. The handle returned by stm32_spibus_initialize() may then be used to
* bind the SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver). * the SPI MMC/SD driver).
* *
@ -219,7 +221,6 @@ uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
} }
#endif #endif
/**************************************************************************** /****************************************************************************
* Name: stm32_spi1cmddata * Name: stm32_spi1cmddata
* *
@ -274,7 +275,6 @@ int stm32_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid,
} }
#endif #endif
return -ENODEV; return -ENODEV;
} }
#endif #endif

18
boards/arm/stm32/stm32f103-minimum/src/stm32_usbdev.c
View File

@ -59,11 +59,11 @@ void stm32_usbinitialize(void)
* Name: stm32_usbpullup * Name: stm32_usbpullup
* *
* Description: * Description:
* If USB is supported and the board supports a pullup via GPIO (for USB software * If USB is supported and the board supports a pullup via GPIO (for USB
* connect and disconnect), then the board software must provide stm32_pullup. * software connect and disconnect), then the board software must provide
* See include/nuttx/usb/usbdev.h for additional description of this method. * stm32_pullup. See include/nuttx/usb/usbdev.h for additional description
* Alternatively, if no pull-up GPIO the following EXTERN can be redefined to be * of this method. Alternatively, if no pull-up GPIO the following EXTERN
* NULL. * can be redefined to be NULL.
* *
****************************************************************************/ ****************************************************************************/
@ -78,10 +78,10 @@ int stm32_usbpullup(FAR struct usbdev_s *dev, bool enable)
* Name: stm32_usbsuspend * Name: stm32_usbsuspend
* *
* Description: * Description:
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is * Board logic must provide the stm32_usbsuspend logic if the USBDEV driver
* used. This function is called whenever the USB enters or leaves suspend mode. * is used. This function is called whenever the USB enters or leaves
* This is an opportunity for the board logic to shutdown clocks, power, etc. * suspend mode. This is an opportunity for the board logic to shutdown
* while the USB is suspended. * clocks, power, etc. while the USB is suspended.
* *
****************************************************************************/ ****************************************************************************/

30
boards/arm/stm32f0l0g0/nucleo-f091rc/src/stm32_spi.c
View File

@ -99,35 +99,38 @@ void stm32_spidev_initialize(void)
* must be provided by board-specific logic. They are implementations of * must be provided by board-specific logic. They are implementations of
* the select and status methods of the SPI interface defined by struct * the select and status methods of the SPI interface defined by struct
* spi_ops_s (see include/nuttx/spi/spi.h). All other methods (including * spi_ops_s (see include/nuttx/spi/spi.h). All other methods (including
* stm32_spibus_initialize()) are provided by common STM32 logic. To use this * stm32_spibus_initialize()) are provided by common STM32 logic.
* common SPI logic on your board: * To use this common SPI logic on your board:
* *
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select * 1. Provide logic in stm32_boardinitialize() to configure SPI chip
* pins. * select pins.
* 2. Provide stm32_spi1/2select() and stm32_spi1/2status() functions * 2. Provide stm32_spi1/2select() and stm32_spi1/2status() functions
* in your board-specific logic. These functions will perform chip * in your board-specific logic. These functions will perform chip
* selection and status operations using GPIOs in the way your board is * selection and status operations using GPIOs in the way your board is
* configured. * configured.
* 3. Add a calls to stm32_spibus_initialize() in your low level application * 3. Add a calls to stm32_spibus_initialize() in your low level
* initialization logic * application initialization logic
* 4. The handle returned by stm32_spibus_initialize() may then be used to bind * 4. The handle returned by stm32_spibus_initialize() may then be used to
* the SPI driver to higher level logic (e.g., calling * bind the SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver). * the SPI MMC/SD driver).
* *
****************************************************************************/ ****************************************************************************/
#ifdef CONFIG_STM32F0L0G0_SPI1 #ifdef CONFIG_STM32F0L0G0_SPI1
void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected) void stm32_spi1select(FAR struct spi_dev_s *dev,
uint32_t devid, bool selected)
{ {
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); spiinfo("devid: %d CS: %s\n",
(int)devid, selected ? "assert" : "de-assert");
switch (devid) switch (devid)
{ {
#ifdef CONFIG_LPWAN_SX127X #ifdef CONFIG_LPWAN_SX127X
case SPIDEV_LPWAN(0): case SPIDEV_LPWAN(0):
{ {
spiinfo("SX127X device %s\n", selected ? "asserted" : "de-asserted"); spiinfo("SX127X device %s\n",
selected ? "asserted" : "de-asserted");
/* Set the GPIO low to select and high to de-select */ /* Set the GPIO low to select and high to de-select */
@ -135,6 +138,7 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
break; break;
} }
#endif #endif
default: default:
{ {
break; break;
@ -155,6 +159,7 @@ uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
break; break;
} }
#endif #endif
default: default:
{ {
break; break;
@ -169,7 +174,8 @@ uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid,
bool selected) bool selected)
{ {
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); spiinfo("devid: %d CS: %s\n",
(int)devid, selected ? "assert" : "de-assert");
} }
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, uint32_t devid) uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)

75
boards/arm/stm32f7/stm32f746g-disco/src/stm32_adc.c
View File

@ -57,6 +57,7 @@
#endif #endif
/* The number of ADC channels in the conversion list */ /* The number of ADC channels in the conversion list */
/* TODO DMA */ /* TODO DMA */
/**************************************************************************** /****************************************************************************
@ -99,52 +100,52 @@ static const uint32_t g_pinlist[6] =
* *
****************************************************************************/ ****************************************************************************/
int stm32_adc_setup(void) int stm32_adc_setup(void)
{ {
#ifdef CONFIG_STM32F7_ADC3 #ifdef CONFIG_STM32F7_ADC3
static bool initialized = false; static bool initialized = false;
struct adc_dev_s *adc; struct adc_dev_s *adc;
int ret; int ret;
int i; int i;
/* Check if we have already initialized */ /* Check if we have already initialized */
if (!initialized) if (!initialized)
{ {
/* Configure the pins as analog inputs for the selected channels */ /* Configure the pins as analog inputs for the selected channels */
for (i = 0; i < ADC3_NCHANNELS; i++) for (i = 0; i < ADC3_NCHANNELS; i++)
{ {
stm32_configgpio(g_pinlist[i]); stm32_configgpio(g_pinlist[i]);
} }
/* Call stm32_adcinitialize() to get an instance of the ADC interface */ /* Call stm32_adcinitialize() to get an instance of the ADC interface */
adc = stm32_adc_initialize(3, g_chanlist, ADC3_NCHANNELS); adc = stm32_adc_initialize(3, g_chanlist, ADC3_NCHANNELS);
if (adc == NULL) if (adc == NULL)
{ {
aerr("ERROR: Failed to get ADC interface\n"); aerr("ERROR: Failed to get ADC interface\n");
return -ENODEV; return -ENODEV;
} }
/* Register the ADC driver at "/dev/adc0" */ /* Register the ADC driver at "/dev/adc0" */
ret = adc_register("/dev/adc3", adc); ret = adc_register("/dev/adc3", adc);
if (ret < 0) if (ret < 0)
{ {
aerr("ERROR: adc_register failed: %d\n", ret); aerr("ERROR: adc_register failed: %d\n", ret);
return ret; return ret;
} }
/* Now we are initialized */ /* Now we are initialized */
initialized = true; initialized = true;
} }
return OK; return OK;
#else #else
return -ENOSYS; return -ENOSYS;
#endif #endif
} }
#endif /* (CONFIG_ADC) && (CONFIG_STM32F7_ADC3) */ #endif /* (CONFIG_ADC) && (CONFIG_STM32F7_ADC3) */

1
boards/arm/stm32l4/b-l475e-iot01a/src/stm32_timer.c
View File

@ -123,6 +123,7 @@ int stm32l4_timer_driver_setup(void)
syslog(LOG_ERR, "ERROR: Failed to setup TIM8 at /dev/timer7: %d\n", syslog(LOG_ERR, "ERROR: Failed to setup TIM8 at /dev/timer7: %d\n",
} }
#endif #endif
#ifdef CONFIG_STM32L4_TIM15 #ifdef CONFIG_STM32L4_TIM15
ret = stm32l4_timer_initialize("/dev/timer8", 15); ret = stm32l4_timer_initialize("/dev/timer8", 15);
if (ret < 0) if (ret < 0)

6
boards/arm/tms570/tms570ls31x-usb-kit/include/board.h
View File

@ -91,7 +91,7 @@
#define BOARD_PLL_NR 6 /* REFCLKDIV = 5 */ #define BOARD_PLL_NR 6 /* REFCLKDIV = 5 */
#define BOARD_PLL_NF 135 /* PLLMUL = 119 * 256 */ #define BOARD_PLL_NF 135 /* PLLMUL = 119 * 256 */
#define BOARD_PLL_OD 2 /* ODPLL = 1 */ #define BOARD_PLL_OD 2 /* ODPLL = 1 */
#define BOARD_PLL_R 1 /* PLLDIV = 1 */ #define BOARD_PLL_R 1 /* PLLDIV = 1 */
#define BOARD_PLL_FREQUENCY 180000000 #define BOARD_PLL_FREQUENCY 180000000
/* Clock Sources / Dividers /* Clock Sources / Dividers
@ -240,8 +240,8 @@
* *
* The launchpad has three mechanical buttons. * The launchpad has three mechanical buttons.
* Two of these are reset buttons: * Two of these are reset buttons:
* One button is labeled PORRST performs a power-on reset and one labeled RST * One button is labeled PORRST performs a power-on reset and one labeled
* performs an MCU reset. * RST performs an MCU reset.
* Only one button is available for general software usage. * Only one button is available for general software usage.
* That button is labeled GIOA7 and is, obviously, sensed on GIOA7. * That button is labeled GIOA7 and is, obviously, sensed on GIOA7.
* *

2
boards/renesas/rx65n/rx65n-rsk1mb/src/rx65n_main.c
View File

@ -34,7 +34,7 @@
****************************************************************************/ ****************************************************************************/
/**************************************************************************** /****************************************************************************
*Included files *Included Files
***************************************************************************/ ***************************************************************************/
#include "rx65n_macrodriver.h" #include "rx65n_macrodriver.h"

2
boards/renesas/rx65n/rx65n/src/rx65n_main.c
View File

@ -34,7 +34,7 @@
****************************************************************************/ ****************************************************************************/
/**************************************************************************** /****************************************************************************
*Included files *Included Files
***************************************************************************/ ***************************************************************************/
#include "rx65n_macrodriver.h" #include "rx65n_macrodriver.h"