sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

stm32f30xxx_rcc.c: remove code that refers to STM32F1 specific definitions

Browse Source
This commit is contained in:
raiden00pl 2022-11-17 10:14:25 +01:00 committed by Xiang Xiao
parent 8021dfece6
commit b239985037
1 changed files with 2 additions and 137 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

139
arch/arm/src/stm32/stm32f30xxx_rcc.c
View File

@ -416,124 +416,13 @@ static inline void rcc_enableapb2(void)
* Name: stm32_stdclockconfig
*
* Description:
* Called to change to new clock based on settings in board.h. This
* version is for the Connectivity Line parts.
* Called to change to new clock based on settings in board.h.
*
* NOTE: This logic would need to be extended if you need to select low-
* power clocking modes!
****************************************************************************/
#if !defined(CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG) && defined(CONFIG_STM32_CONNECTIVITYLINE)
static void stm32_stdclockconfig(void)
{
uint32_t regval;
/* Enable HSE */
regval = getreg32(STM32_RCC_CR);
regval &= ~RCC_CR_HSEBYP; /* Disable HSE clock bypass */
regval |= RCC_CR_HSEON; /* Enable HSE */
putreg32(regval, STM32_RCC_CR);
/* Enable FLASH prefetch buffer and set FLASH wait states */
regval = getreg32(STM32_FLASH_ACR);
regval &= ~FLASH_ACR_LATENCY_MASK;
regval |= (FLASH_ACR_LATENCY_SETTING | FLASH_ACR_PRTFBE);
putreg32(regval, STM32_FLASH_ACR);
/* Set up PLL input scaling (with source = PLL2) */
regval = getreg32(STM32_RCC_CFGR2);
regval &= ~(RCC_CFGR2_PREDIV2_MASK | RCC_CFGR2_PLL2MUL_MASK |
RCC_CFGR2_PREDIV1SRC_MASK | RCC_CFGR2_PREDIV1_MASK);
regval |= (STM32_PLL_PREDIV2 | STM32_PLL_PLL2MUL |
RCC_CFGR2_PREDIV1SRC_PLL2 | STM32_PLL_PREDIV1);
putreg32(regval, STM32_RCC_CFGR2);
/* Set the PCLK2 divider */
regval = getreg32(STM32_RCC_CFGR);
regval &= ~(RCC_CFGR_PPRE2_MASK | RCC_CFGR_HPRE_MASK);
regval |= STM32_RCC_CFGR_PPRE2;
regval |= RCC_CFGR_HPRE_SYSCLK;
putreg32(regval, STM32_RCC_CFGR);
/* Set the PCLK1 divider */
regval = getreg32(STM32_RCC_CFGR);
regval &= ~RCC_CFGR_PPRE1_MASK;
regval |= STM32_RCC_CFGR_PPRE1;
putreg32(regval, STM32_RCC_CFGR);
/* Enable PLL2 */
regval = getreg32(STM32_RCC_CR);
regval |= RCC_CR_PLL2ON;
putreg32(regval, STM32_RCC_CR);
/* Wait for PLL2 ready */
while ((getreg32(STM32_RCC_CR) & RCC_CR_PLL2RDY) == 0);
/* Setup PLL3 for MII/RMII clock on MCO */
#if defined(CONFIG_STM32_MII_MCO) || defined(CONFIG_STM32_RMII_MCO)
regval = getreg32(STM32_RCC_CFGR2);
regval &= ~(RCC_CFGR2_PLL3MUL_MASK);
regval |= STM32_PLL_PLL3MUL;
putreg32(regval, STM32_RCC_CFGR2);
/* Switch PLL3 on */
regval = getreg32(STM32_RCC_CR);
regval |= RCC_CR_PLL3ON;
putreg32(regval, STM32_RCC_CR);
while ((getreg32(STM32_RCC_CR) & RCC_CR_PLL3RDY) == 0);
#endif
/* Set main PLL source and multiplier */
regval = getreg32(STM32_RCC_CFGR);
regval &= ~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL_MASK);
regval |= (RCC_CFGR_PLLSRC | STM32_PLL_PLLMUL);
putreg32(regval, STM32_RCC_CFGR);
/* Switch main PLL on */
regval = getreg32(STM32_RCC_CR);
regval |= RCC_CR_PLLON;
putreg32(regval, STM32_RCC_CR);
while ((getreg32(STM32_RCC_CR) & RCC_CR_PLLRDY) == 0);
/* Select PLL as system clock source */
regval = getreg32(STM32_RCC_CFGR);
regval &= ~RCC_CFGR_SW_MASK;
regval |= RCC_CFGR_SW_PLL;
putreg32(regval, STM32_RCC_CFGR);
/* Wait until PLL is used as the system clock source */
while ((getreg32(STM32_RCC_CFGR) & RCC_CFGR_SWS_PLL) == 0);
}
#endif
/****************************************************************************
* Name: stm32_stdclockconfig
*
* Description:
* Called to change to new clock based on settings in board.h. This
* version is for the non-Connectivity Line parts.
*
* NOTE: This logic would need to be extended if you need to select low-
* power clocking modes!
****************************************************************************/
#if !defined(CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG) && \
!defined(CONFIG_STM32_CONNECTIVITYLINE)
#if !defined(CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG)
static void stm32_stdclockconfig(void)
{
uint32_t regval;
@ -576,30 +465,6 @@ static void stm32_stdclockconfig(void)
}
}
# if defined(CONFIG_STM32_VALUELINE) && (STM32_CFGR_PLLSRC == RCC_CFGR_PLLSRC)
/* If this is a value-line part and we are using the HSE as the PLL */
# if (STM32_CFGR_PLLXTPRE >> 17) != (STM32_CFGR2_PREDIV1 & 1)
# error STM32_CFGR_PLLXTPRE must match the LSB of STM32_CFGR2_PREDIV1
# endif
/* Set the HSE prescaler */
regval = STM32_CFGR2_PREDIV1;
putreg32(regval, STM32_RCC_CFGR2);
# endif
#endif
#ifndef CONFIG_STM32_VALUELINE
/* Value-line devices don't implement flash prefetch/waitstates */
/* Enable FLASH prefetch buffer and set FLASH wait states */
regval = getreg32(STM32_FLASH_ACR);
regval &= ~FLASH_ACR_LATENCY_MASK;
regval |= (FLASH_ACR_LATENCY_SETTING | FLASH_ACR_PRTFBE);
putreg32(regval, STM32_FLASH_ACR);
#endif
/* Set the HCLK source/divider */