From b3d182b5d503428cc70dae8c3f82b7055f62c77c Mon Sep 17 00:00:00 2001 From: Masayuki Ishikawa Date: Sun, 4 Dec 2016 07:06:17 -0600 Subject: [PATCH] Add support for the SAM5CMP-DB board --- configs/Kconfig | 10 + configs/README.txt | 3 + configs/sam4cmp-db/Kconfig | 7 + configs/sam4cmp-db/README.txt | 28 + configs/sam4cmp-db/include/board.h | 178 +++++ configs/sam4cmp-db/nsh/Make.defs | 111 +++ configs/sam4cmp-db/nsh/defconfig | 964 +++++++++++++++++++++++++++ configs/sam4cmp-db/nsh/setenv.sh | 73 ++ configs/sam4cmp-db/scripts/ld.script | 121 ++++ configs/sam4cmp-db/src/Makefile | 41 ++ configs/sam4cmp-db/src/sam4cmp-db.h | 68 ++ configs/sam4cmp-db/src/sam_boot.c | 91 +++ 12 files changed, 1695 insertions(+) create mode 100644 configs/sam4cmp-db/Kconfig create mode 100644 configs/sam4cmp-db/README.txt create mode 100644 configs/sam4cmp-db/include/board.h create mode 100644 configs/sam4cmp-db/nsh/Make.defs create mode 100644 configs/sam4cmp-db/nsh/defconfig create mode 100644 configs/sam4cmp-db/nsh/setenv.sh create mode 100644 configs/sam4cmp-db/scripts/ld.script create mode 100644 configs/sam4cmp-db/src/Makefile create mode 100644 configs/sam4cmp-db/src/sam4cmp-db.h create mode 100644 configs/sam4cmp-db/src/sam_boot.c diff --git a/configs/Kconfig b/configs/Kconfig index a0eeadad0f..6ef90c00ef 100644 --- a/configs/Kconfig +++ b/configs/Kconfig @@ -852,6 +852,12 @@ config ARCH_BOARD_SAM3UEK ---help--- The port of NuttX to the Atmel SAM3U-EK development board. +config ARCH_BOARD_SAM4CMP_DB + bool "Atmel SAM4CMP-DB development board" + depends on ARCH_CHIP_ATSAM4CMP16B + ---help--- + The port of NuttX to the Atmel SAM4CMP-DB development board. + config ARCH_BOARD_SAM4EEK bool "Atmel SAM4E-EK development board" depends on ARCH_CHIP_ATSAM4E16E @@ -1456,6 +1462,7 @@ config ARCH_BOARD default "samd21-xplained" if ARCH_BOARD_SAMD21_XPLAINED default "saml21-xplained" if ARCH_BOARD_SAML21_XPLAINED default "sam3u-ek" if ARCH_BOARD_SAM3UEK + default "sam4cmp-db" if ARCH_BOARD_SAM4CMP_DB default "sam4e-ek" if ARCH_BOARD_SAM4EEK default "sam4l-xplained" if ARCH_BOARD_SAM4L_XPLAINED default "sam4s-xplained" if ARCH_BOARD_SAM4S_XPLAINED @@ -1785,6 +1792,9 @@ endif if ARCH_BOARD_SAM3UEK source "configs/sam3u-ek/Kconfig" endif +if ARCH_BOARD_SAM4CMP_DB +source "configs/sam4cmp-db/Kconfig" +endif if ARCH_BOARD_SAM4EEK source "configs/sam4e-ek/Kconfig" endif diff --git a/configs/README.txt b/configs/README.txt index fa59055c6a..c7fe008e1d 100644 --- a/configs/README.txt +++ b/configs/README.txt @@ -600,6 +600,9 @@ configs/samd21-xplained configs/sam3u-ek The port of NuttX to the Atmel SAM3U-EK development board. +configs/sam4cmp-db + The port of NuttX to the Atmel SAM4CMP-DB development board. + configs/sam4e-ek The port of NuttX to the Atmel SAM4E-EK development board. This board features the SAM4E16 MCU running at up to 120MHz. diff --git a/configs/sam4cmp-db/Kconfig b/configs/sam4cmp-db/Kconfig new file mode 100644 index 0000000000..9080dfce40 --- /dev/null +++ b/configs/sam4cmp-db/Kconfig @@ -0,0 +1,7 @@ +# +# For a description of the syntax of this configuration file, +# see the file kconfig-language.txt in the NuttX tools repository. +# + +if ARCH_BOARD_SAM4CMP_DB +endif diff --git a/configs/sam4cmp-db/README.txt b/configs/sam4cmp-db/README.txt new file mode 100644 index 0000000000..efe90a6690 --- /dev/null +++ b/configs/sam4cmp-db/README.txt @@ -0,0 +1,28 @@ +README +^^^^^^ + +README for NuttX port to the SAM4CMP-DB board. + + http://www.atmel.com/tools/SAM4CMP-DB.aspx + +The board is intended to test NuttX SMP features for dual Cortex-M4. + + +Settings +^^^^^^^^ +1. Both CPUs are running at 92.160MHz with PLLB. +2. Serial console can be used via on-board USB-UART (115200/8/N/1) +3. Interrupt handlers such as timer and UART are handled on CPU0 +4. Both CPUs share internal SRAM0 (128KB) +5. SRAM1 is used to boot CPU1. +6. Cache controllers are disabled because of no snooping features. + +Status +^^^^^^ +Currently SMP freature works on the board but is not stable. + +1. "nsh> sleep 1 &" works without crash. +2. "nsh> smp " sometimes works but some assertions might happen. +3. "nsh> ostest " causes deadlocks during the test. + + diff --git a/configs/sam4cmp-db/include/board.h b/configs/sam4cmp-db/include/board.h new file mode 100644 index 0000000000..1339e6ec67 --- /dev/null +++ b/configs/sam4cmp-db/include/board.h @@ -0,0 +1,178 @@ +/************************************************************************************ + * configs/sam4cmp-db/include/board.h + * + * Copyright (C) 2016 Masayuki Ishikawa. All rights reserved. + * Author: Masayuki Ishikawa + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_SAM4CMP_DB_INCLUDE_BOARD_H +#define __CONFIGS_SAM4CMP_DB_INCLUDE_BOARD_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#ifndef __ASSEMBLY__ +# include +#endif + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/* Clocking *************************************************************************/ +/* After power-on reset, the sam3u device is running on a 4MHz internal RC. These + * definitions will configure clocking with MCK = 48MHz, PLLA = 96, and CPU=120MHz. + */ + +/* Main oscillator register settings */ + +#define BOARD_CKGR_MOR_MOSCXTST (63 << PMC_CKGR_MOR_MOSCXTST_SHIFT) /* Start-up Time */ + +/* PLLA configuration: + * + * Source: 12MHz crystall at 12MHz + * PLLdiv: 10 + * PLLmul: 1 (bypassed) + * Fpll: (12MHz * 10) / 1 = 120MHz + */ + +#define BOARD_MAINOSC_FREQUENCY (8192000) +#define BOARD_CKGR_PLLAR_MUL (9 << PMC_CKGR_PLLAR_MUL_SHIFT) +#define BOARD_CKGR_PLLAR_DIV PMC_CKGR_PLLAR_DIV_BYPASS +#define BOARD_CKGR_PLLAR_COUNT (63 << PMC_CKGR_PLLAR_COUNT_SHIFT) +#define BOARD_PLLA_FREQUENCY (10*BOARD_MAINOSC_FREQUENCY) + +/* PLLB configuration + * + * Source: MAIN clock (i.e. 8.192MHz) + * PLLdiv: 4 + * PLLmul: 45 + * Fpll: (8.192MHz * (44+1) / 4 = 92.120 MHz + */ + +#define BOARD_CKGR_PLLBR_SRCB (0 << PMC_CKGR_PLLBR_SRCB_SHIFT) +#define BOARD_CKGR_PLLBR_DIV (4 << PMC_CKGR_PLLBR_DIV_SHIFT) +#define BOARD_CKGR_PLLBR_MUL (44 << PMC_CKGR_PLLBR_MUL_SHIFT) +#define BOARD_CKGR_PLLBR_COUNT (63 << PMC_CKGR_PLLBR_COUNT_SHIFT) +#define BOARD_PLLB_FREQUENCY (92160000) + + +/* PMC master clock register settings */ + +#define BOARD_PMC_MCKR_CSS PMC_MCKR_CSS_PLLB +#define BOARD_PMC_MCKR_PRES PMC_MCKR_PRES_DIV1 +#define BOARD_MCK_FREQUENCY (BOARD_PLLB_FREQUENCY/1) +#define BOARD_CPU_FREQUENCY (BOARD_PLLB_FREQUENCY/1) + +/* USB UTMI PLL start-up time */ + +#define BOARD_CKGR_UCKR_UPLLCOUNT (3 << PMC_CKGR_UCKR_UPLLCOUNT_SHIFT) + +/* FLASH wait states: + * + * DC Characteristics + * + * Parameter Min Typ Max + * ---------------------- ----- ----- ---- + * Vddcore DC Supply Core 1.08V 1.2V 1.32V + * Vvddio DC Supply I/Os 1.62V 3.3V 3.6V + * + * Wait Maximum + * Vddcore Vvddio States Frequency (MHz) + * ------- ---------- ------ --------------- + * 1.08V 1.62-3.6V 0 16 + * " " " "-" " 1 33 + * " " " "-" " 2 50 + * " " " "-" " 3 67 + * " " " "-" " 4 84 + * " " " "-" " 5 100 + * 1.08V 2.7-3.6V 0 20 + * " " " "-" " 1 40 + * " " " "-" " 2 60 + * " " " "-" " 3 80 + * " " " "-" " 4 100 + * 1.2V 1.62-3.6V 0 17 + * " " " "-" " 1 34 + * " " " "-" " 2 52 + * " " " "-" " 3 69 + * " " " "-" " 4 87 + * " " " "-" " 5 104 + * " " " "-" " 6 121 + * 1.2V 2.7-3.6V 0 21 + * " " " "-" " 1 42 + * " " " "-" " 2 63 + * " " " "-" " 3 84 + * " " " "-" " 4 105 + * " " " "-" " 5 123 << SELECTION + */ + +#define BOARD_FWS 5 + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" +{ +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ +/************************************************************************************ + * Name: sam_boardinitialize + * + * Description: + * All SAM3U architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void sam_boardinitialize(void); + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_SAM4CMP_DB_INCLUDE_BOARD_H */ diff --git a/configs/sam4cmp-db/nsh/Make.defs b/configs/sam4cmp-db/nsh/Make.defs new file mode 100644 index 0000000000..60acde6e28 --- /dev/null +++ b/configs/sam4cmp-db/nsh/Make.defs @@ -0,0 +1,111 @@ +############################################################################ +# configs/sam4cmp-db/nsh/Make.defs +# +# Copyright (C) 2016 Masayuki Ishikawa. All rights reserved. +# Author: Masayuki Ishikawa +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mkwindeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef +ARCHWARNINGSXX = -Wall -Wshadow -Wundef +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +ASMEXT = .S +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe +HOSTLDFLAGS = + diff --git a/configs/sam4cmp-db/nsh/defconfig b/configs/sam4cmp-db/nsh/defconfig new file mode 100644 index 0000000000..8dc7937a07 --- /dev/null +++ b/configs/sam4cmp-db/nsh/defconfig @@ -0,0 +1,964 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +CONFIG_EXPERIMENTAL=y +# CONFIG_DEFAULT_SMALL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +CONFIG_APPS_DIR="../apps" +CONFIG_BUILD_FLAT=y +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y +# CONFIG_UBOOT_UIMAGE is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDINT_H is not set +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set +# CONFIG_ARCH_DEBUG_H is not set + +# +# Debug Options +# +CONFIG_DEBUG_ALERT=y +CONFIG_DEBUG_FEATURES=y + +# +# Debug SYSLOG Output Controls +# +CONFIG_DEBUG_ERROR=y +CONFIG_DEBUG_WARN=y +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_ASSERTIONS=y + +# +# Subsystem Debug Options +# +# CONFIG_DEBUG_BINFMT is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_GRAPHICS is not set +# CONFIG_DEBUG_LIB is not set +# CONFIG_DEBUG_MM is not set +# CONFIG_DEBUG_SCHED is not set + +# +# OS Function Debug Options +# +# CONFIG_DEBUG_IRQ is not set + +# +# Driver Debug Options +# +# CONFIG_DEBUG_GPIO is not set +# CONFIG_DEBUG_TIMER is not set +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_STACK_COLORATION is not set +# CONFIG_ARCH_HAVE_HEAPCHECK is not set +CONFIG_DEBUG_SYMBOLS=y +CONFIG_ARCH_HAVE_CUSTOMOPT=y +CONFIG_DEBUG_NOOPT=y +# CONFIG_DEBUG_CUSTOMOPT is not set +# CONFIG_DEBUG_FULLOPT is not set + +# +# System Type +# +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_MISOC is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_RISCV is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_XTENSA is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_EFM32 is not set +# CONFIG_ARCH_CHIP_IMX1 is not set +# CONFIG_ARCH_CHIP_IMX6 is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LC823450 is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_TIVA is not set +# CONFIG_ARCH_CHIP_LPC11XX is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAML is not set +CONFIG_ARCH_CHIP_SAM34=y +# CONFIG_ARCH_CHIP_SAMV7 is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STM32F7 is not set +# CONFIG_ARCH_CHIP_STM32L4 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_CHIP_TMS570 is not set +# CONFIG_ARCH_CHIP_MOXART is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +# CONFIG_ARCH_CORTEXM3 is not set +CONFIG_ARCH_CORTEXM4=y +# CONFIG_ARCH_CORTEXM7 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +# CONFIG_ARCH_CORTEXA9 is not set +# CONFIG_ARCH_CORTEXR4 is not set +# CONFIG_ARCH_CORTEXR4F is not set +# CONFIG_ARCH_CORTEXR5 is not set +# CONFIG_ARCH_CORTEX5F is not set +# CONFIG_ARCH_CORTEXR7 is not set +# CONFIG_ARCH_CORTEXR7F is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="sam34" +# CONFIG_ARM_TOOLCHAIN_IAR is not set +CONFIG_ARM_TOOLCHAIN_GNU=y +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +# CONFIG_ARMV7M_CMNVECTOR is not set +# CONFIG_ARMV7M_LAZYFPU is not set +# CONFIG_ARCH_HAVE_FPU is not set +# CONFIG_ARCH_HAVE_DPFPU is not set +# CONFIG_ARCH_HAVE_TRUSTZONE is not set +CONFIG_ARM_HAVE_MPU_UNIFIED=y +# CONFIG_ARM_MPU is not set +# CONFIG_DEBUG_HARDFAULT is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_HAVE_ICACHE is not set +# CONFIG_ARMV7M_HAVE_DCACHE is not set +# CONFIG_ARMV7M_HAVE_ITCM is not set +# CONFIG_ARMV7M_HAVE_DTCM is not set +# CONFIG_ARMV7M_TOOLCHAIN_IARL is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y +CONFIG_ARMV7M_HAVE_STACKCHECK=y +# CONFIG_ARMV7M_STACKCHECK is not set +# CONFIG_ARMV7M_ITMSYSLOG is not set +# CONFIG_SERIAL_TERMIOS is not set + +# +# AT91SAM3/4 Configuration Options +# +# CONFIG_ARCH_CHIP_ATSAM3U4E is not set +# CONFIG_ARCH_CHIP_ATSAM3U4C is not set +# CONFIG_ARCH_CHIP_ATSAM3U2E is not set +# CONFIG_ARCH_CHIP_ATSAM3U2C is not set +# CONFIG_ARCH_CHIP_ATSAM3U1E is not set +# CONFIG_ARCH_CHIP_ATSAM3U1C is not set +# CONFIG_ARCH_CHIP_ATSAM3X8E is not set +# CONFIG_ARCH_CHIP_ATSAM3X8C is not set +# CONFIG_ARCH_CHIP_ATSAM3X4E is not set +# CONFIG_ARCH_CHIP_ATSAM3X4C is not set +# CONFIG_ARCH_CHIP_ATSAM3A8C is not set +# CONFIG_ARCH_CHIP_ATSAM3A4C is not set +CONFIG_ARCH_CHIP_ATSAM4CMP16B=y +# CONFIG_ARCH_CHIP_ATSAM4LC2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4A is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD32B is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SD16B is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16C is not set +# CONFIG_ARCH_CHIP_ATSAM4SA16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S16C is not set +# CONFIG_ARCH_CHIP_ATSAM4S16B is not set +# CONFIG_ARCH_CHIP_ATSAM4S8C is not set +# CONFIG_ARCH_CHIP_ATSAM4S8B is not set +# CONFIG_ARCH_CHIP_ATSAM4E16E is not set +# CONFIG_ARCH_CHIP_ATSAM4E16C is not set +# CONFIG_ARCH_CHIP_ATSAM4E8E is not set +# CONFIG_ARCH_CHIP_ATSAM4E8C is not set +# CONFIG_ARCH_CHIP_SAM3U is not set +# CONFIG_ARCH_CHIP_SAM3X is not set +# CONFIG_ARCH_CHIP_SAM3A is not set +CONFIG_ARCH_CHIP_SAM4CM=y +# CONFIG_ARCH_CHIP_SAM4L is not set +# CONFIG_ARCH_CHIP_SAM4E is not set +# CONFIG_ARCH_CHIP_SAM4S is not set + +# +# AT91SAM3/4 Peripheral Support +# +# CONFIG_SAM34_ADC12B is not set +# CONFIG_SAM34_AES is not set +# CONFIG_SAM34_DMAC1 is not set +# CONFIG_SAM34_SLCDC is not set +# CONFIG_SAM34_SPI0 is not set +# CONFIG_SAM34_TC0 is not set +# CONFIG_SAM34_TC1 is not set +# CONFIG_SAM34_TWI is not set +# CONFIG_SAM34_TWIM is not set +# CONFIG_SAM34_TWIS is not set +# CONFIG_SAM34_TWIM0 is not set +# CONFIG_SAM34_TWIS0 is not set +# CONFIG_SAM34_TWIM1 is not set +# CONFIG_SAM34_TWIS1 is not set +CONFIG_SAM34_UART0=y +# CONFIG_SAM34_UART1 is not set +# CONFIG_SAM34_USART0 is not set +# CONFIG_SAM34_USART1 is not set +# CONFIG_SAM34_USART2 is not set +# CONFIG_SAM34_USART3 is not set +# CONFIG_SAM34_WDT is not set + +# +# AT91SAM3/4 External Memory Configuration +# + +# +# AT91SAM3/4 GPIO Interrupt Configuration +# +# CONFIG_SAM34_HAVE_GPIOD_IRQ is not set +# CONFIG_SAM34_HAVE_GPIOE_IRQ is not set +# CONFIG_SAM34_HAVE_GPIOF_IRQ is not set +# CONFIG_SAM34_GPIO_IRQ is not set +# CONFIG_SAM34_TC is not set + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_ARCH_L2CACHE is not set +# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set +# CONFIG_ARCH_HAVE_ADDRENV is not set +# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set +CONFIG_ARCH_HAVE_MULTICPU=y +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARCH_NAND_HWECC is not set +# CONFIG_ARCH_HAVE_EXTCLK is not set +# CONFIG_ARCH_HAVE_POWEROFF is not set +CONFIG_ARCH_HAVE_RESET=y +# CONFIG_ARCH_USE_MPU is not set +# CONFIG_ARCH_IRQPRIO is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +CONFIG_ARCH_HAVE_RAMFUNCS=y +CONFIG_ARCH_RAMFUNCS=y +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=6124 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x20000000 +CONFIG_RAM_SIZE=131072 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_SAM4CMP_DB=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="sam4cmp-db" + +# +# Common Board Options +# + +# +# Board-Specific Options +# +# CONFIG_BOARD_CRASHDUMP is not set +# CONFIG_LIB_BOARDCTL is not set + +# +# RTOS Features +# +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +CONFIG_DISABLE_ENVIRON=y + +# +# Clocks and Timers +# +CONFIG_ARCH_HAVE_TICKLESS=y +# CONFIG_SCHED_TICKLESS is not set +CONFIG_USEC_PER_TICK=10000 +# CONFIG_SYSTEM_TIME64 is not set +# CONFIG_CLOCK_MONOTONIC is not set +# CONFIG_ARCH_HAVE_TIMEKEEPING is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2013 +CONFIG_START_MONTH=6 +CONFIG_START_DAY=12 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_WDOG_INTRESERVE=0 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +CONFIG_SPINLOCK=y +CONFIG_SMP=y +CONFIG_SMP_NCPUS=2 +CONFIG_SMP_IDLETHREAD_STACKSIZE=2048 +# CONFIG_INIT_NONE is not set +CONFIG_INIT_ENTRYPOINT=y +# CONFIG_INIT_FILEPATH is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=0 +# CONFIG_SCHED_SPORADIC is not set +CONFIG_TASK_NAME_SIZE=24 +CONFIG_MAX_TASKS=32 +# CONFIG_SCHED_HAVE_PARENT is not set +CONFIG_SCHED_WAITPID=y + +# +# Pthread Options +# +# CONFIG_MUTEX_TYPES is not set +CONFIG_NPTHREAD_KEYS=4 + +# +# Performance Monitoring +# +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +CONFIG_DEV_CONSOLE=y +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +# CONFIG_BOARD_INITIALIZE is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# POSIX Message Queue Options +# +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +# CONFIG_MODULE is not set + +# +# Work queue support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_HPWORK is not set +# CONFIG_SCHED_LPWORK is not set + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +# CONFIG_LIB_SYSCALL is not set + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_DEV_URANDOM is not set +# CONFIG_DEV_LOOP is not set + +# +# Buffering +# +# CONFIG_DRVR_WRITEBUFFER is not set +# CONFIG_DRVR_READAHEAD is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set +# CONFIG_PWM is not set +# CONFIG_ARCH_HAVE_I2CRESET is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set +# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set +# CONFIG_ARCH_HAVE_SPI_BITORDER is not set +# CONFIG_I2S is not set + +# +# Timer Driver Support +# +# CONFIG_TIMER is not set +# CONFIG_ONESHOT is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set + +# +# IO Expander/GPIO Support +# +# CONFIG_IOEXPANDER is not set +# CONFIG_DEV_GPIO is not set + +# +# LCD Driver Support +# +# CONFIG_LCD is not set +# CONFIG_SLCD is not set + +# +# LED Support +# +# CONFIG_RGBLED is not set +# CONFIG_PCA9635PW is not set +# CONFIG_NCP5623C is not set +# CONFIG_MMCSD is not set +# CONFIG_MODEM is not set +# CONFIG_MTD is not set +# CONFIG_EEPROM is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_SERIAL_REMOVABLE is not set +CONFIG_SERIAL_CONSOLE=y +# CONFIG_16550_UART is not set +# CONFIG_UART_SERIALDRIVER is not set +CONFIG_UART0_SERIALDRIVER=y +# CONFIG_UART1_SERIALDRIVER is not set +# CONFIG_UART2_SERIALDRIVER is not set +# CONFIG_UART3_SERIALDRIVER is not set +# CONFIG_UART4_SERIALDRIVER is not set +# CONFIG_UART5_SERIALDRIVER is not set +# CONFIG_UART6_SERIALDRIVER is not set +# CONFIG_UART7_SERIALDRIVER is not set +# CONFIG_UART8_SERIALDRIVER is not set +# CONFIG_SCI0_SERIALDRIVER is not set +# CONFIG_SCI1_SERIALDRIVER is not set +# CONFIG_USART0_SERIALDRIVER is not set +# CONFIG_USART1_SERIALDRIVER is not set +# CONFIG_USART2_SERIALDRIVER is not set +# CONFIG_USART3_SERIALDRIVER is not set +# CONFIG_USART4_SERIALDRIVER is not set +# CONFIG_USART5_SERIALDRIVER is not set +# CONFIG_USART6_SERIALDRIVER is not set +# CONFIG_USART7_SERIALDRIVER is not set +# CONFIG_USART8_SERIALDRIVER is not set +# CONFIG_OTHER_UART_SERIALDRIVER is not set +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_SERIAL_DMA is not set +# CONFIG_SERIAL_TIOCSERGSTRUCT is not set +CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y +CONFIG_UART0_SERIAL_CONSOLE=y +# CONFIG_OTHER_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART0 Configuration +# +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART0_BAUD=115200 +CONFIG_UART0_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART0_2STOP=0 +# CONFIG_UART0_IFLOWCONTROL is not set +# CONFIG_UART0_OFLOWCONTROL is not set +# CONFIG_UART0_DMA is not set +# CONFIG_PSEUDOTERM is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_HAVE_USBTRACE is not set +# CONFIG_DRIVERS_WIRELESS is not set +# CONFIG_DRIVERS_CONTACTLESS is not set + +# +# System Logging +# +# CONFIG_ARCH_SYSLOG is not set +# CONFIG_RAMLOG is not set +# CONFIG_SYSLOG_INTBUFFER is not set +# CONFIG_SYSLOG_TIMESTAMP is not set +CONFIG_SYSLOG_SERIAL_CONSOLE=y +# CONFIG_SYSLOG_CHAR is not set +CONFIG_SYSLOG_CONSOLE=y +# CONFIG_SYSLOG_NONE is not set +# CONFIG_SYSLOG_FILE is not set +# CONFIG_SYSLOG_CHARDEV is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# Crypto API +# +# CONFIG_CRYPTO is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_AUTOMOUNTER is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +CONFIG_FS_READABLE=y +# CONFIG_FS_WRITABLE is not set +# CONFIG_FS_NAMED_SEMAPHORES is not set +CONFIG_FS_MQUEUE_MPATH="/var/mqueue" +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_TMPFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set +CONFIG_FS_PROCFS=y +# CONFIG_FS_PROCFS_REGISTER is not set + +# +# Exclude individual procfs entries +# +# CONFIG_FS_PROCFS_EXCLUDE_PROCESS is not set +# CONFIG_FS_PROCFS_EXCLUDE_UPTIME is not set +# CONFIG_FS_PROCFS_EXCLUDE_MOUNTS is not set +# CONFIG_FS_UNIONFS is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Wireless Support +# +# CONFIG_WIRELESS is not set + +# +# Binary Loader +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIBC_LONG_LONG=y +# CONFIG_LIBC_IOCTL_VARIADIC is not set +# CONFIG_LIBC_WCHAR is not set +# CONFIG_LIBC_LOCALE is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +# CONFIG_TIME_EXTENDED is not set +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set +CONFIG_ARCH_HAVE_TLS=y +# CONFIG_TLS is not set +# CONFIG_LIBC_NETDB is not set +# CONFIG_NETDB_HOSTFILE is not set + +# +# Non-standard Library Support +# +# CONFIG_LIB_CRC64_FAST is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set +# CONFIG_LIB_HEX2BIN is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# CAN Utilities +# + +# +# Examples +# +# CONFIG_EXAMPLES_CCTYPE is not set +# CONFIG_EXAMPLES_CHAT is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_MEDIA is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTERM is not set +# CONFIG_EXAMPLES_NXTEXT is not set +CONFIG_EXAMPLES_OSTEST=y +CONFIG_EXAMPLES_OSTEST_LOOPS=1 +CONFIG_EXAMPLES_OSTEST_STACKSIZE=8192 +CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=8 +CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000 +CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 +CONFIG_EXAMPLES_OSTEST_WAITRESULT=y +# CONFIG_EXAMPLES_PCA9635 is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_PPPD is not set +# CONFIG_EXAMPLES_RFID_READUID is not set +# CONFIG_EXAMPLES_RGBLED is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +CONFIG_EXAMPLES_SMP=y +CONFIG_EXAMPLES_SMP_NBARRIER_THREADS=8 +CONFIG_EXAMPLES_SMP_PRIORITY=100 +CONFIG_EXAMPLES_SMP_STACKSIZE=2048 +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WEBSERVER is not set + +# +# File System Utilities +# +# CONFIG_FSUTILS_INIFILE is not set +# CONFIG_FSUTILS_PASSWD is not set + +# +# GPS Utilities +# +# CONFIG_GPSUTILS_MINMEA_LIB is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set +# CONFIG_GRAPHICS_TRAVELER is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_BAS is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_MICROPYTHON is not set +# CONFIG_INTERPRETERS_MINIBASIC is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# Network Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_ESP8266 is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +# CONFIG_NSH_MOTD is not set + +# +# Command Line Configuration +# +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=80 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +CONFIG_NSH_CMDPARMS=y +CONFIG_NSH_MAXARGUMENTS=6 +CONFIG_NSH_ARGCAT=y +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_ADDROUTE is not set +# CONFIG_NSH_DISABLE_BASENAME is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_CMP is not set +CONFIG_NSH_DISABLE_DATE=y +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_DELROUTE is not set +# CONFIG_NSH_DISABLE_DIRNAME is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +CONFIG_NSH_DISABLE_IFUPDOWN=y +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +CONFIG_NSH_DISABLE_LOSMART=y +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MV is not set +# CONFIG_NSH_DISABLE_MW is not set +CONFIG_NSH_DISABLE_PRINTF=y +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TIME is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNAME is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_CMDOPT_HEXDUMP=y +CONFIG_NSH_PROC_MOUNTPOINT="/proc" +CONFIG_NSH_FILEIOSIZE=512 + +# +# Scripting Support +# +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set + +# +# Console Configuration +# +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_ALTCONDEV is not set +# CONFIG_NSH_ARCHINIT is not set +# CONFIG_NSH_LOGIN is not set +# CONFIG_NSH_CONSOLE_LOGIN is not set + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# +# CONFIG_SYSTEM_CLE is not set +# CONFIG_SYSTEM_CUTERM is not set +# CONFIG_SYSTEM_FREE is not set +# CONFIG_SYSTEM_HEX2BIN is not set +# CONFIG_SYSTEM_HEXED is not set +# CONFIG_SYSTEM_INSTALL is not set +# CONFIG_SYSTEM_RAMTEST is not set +CONFIG_READLINE_HAVE_EXTMATCH=y +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y +# CONFIG_READLINE_TABCOMPLETION is not set +# CONFIG_READLINE_CMD_HISTORY is not set +# CONFIG_SYSTEM_SUDOKU is not set +# CONFIG_SYSTEM_SYSTEM is not set +# CONFIG_SYSTEM_TEE is not set +# CONFIG_SYSTEM_UBLOXMODEM is not set +# CONFIG_SYSTEM_VI is not set +# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/sam4cmp-db/nsh/setenv.sh b/configs/sam4cmp-db/nsh/setenv.sh new file mode 100644 index 0000000000..651b20b308 --- /dev/null +++ b/configs/sam4cmp-db/nsh/setenv.sh @@ -0,0 +1,73 @@ +#!/bin/bash +# configs/sam4cmp-db/nsh/setenv.sh +# +# Copyright (C) 2016 Masayuki Ishikawa. All rights reserved. +# Author: Masayuki Ishikawa +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the Atmel GCC +# toolchain under Windows. You will also have to edit this if you install +# this toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" + +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH varialble +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/configs/sam4cmp-db/scripts/ld.script b/configs/sam4cmp-db/scripts/ld.script new file mode 100644 index 0000000000..d82568f84f --- /dev/null +++ b/configs/sam4cmp-db/scripts/ld.script @@ -0,0 +1,121 @@ +/**************************************************************************** + * configs/sam4cmp-db/scripts/ld.script + * + * Copyright (C) 2016 Masayuki Ishikawa. All rights reserved. + * Author: Masayuki Ishikawa + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The ATSAM4CM has 1MB of FLASH beginning at address 0x0100:0000 and + * 128KB of SRAM beginning at address 0x2000:0000 + */ + +MEMORY +{ + flash (rx) : ORIGIN = 0x01000000, LENGTH = 1024K + sram (rwx) : ORIGIN = 0x20000000, LENGTH = 128K +} + +OUTPUT_ARCH(arm) +ENTRY(_stext) +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > flash + + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > flash + + .ARM.extab : { + *(.ARM.extab*) + } >flash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } >flash + __exidx_end = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + _eronly = LOADADDR(.data); + + .ramfunc ALIGN(4): { + _sramfuncs = ABSOLUTE(.); + *(.ramfunc .ramfunc.*) + _eramfuncs = ABSOLUTE(.); + } > sram AT > flash + + _framfuncs = LOADADDR(.ramfunc); + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/configs/sam4cmp-db/src/Makefile b/configs/sam4cmp-db/src/Makefile new file mode 100644 index 0000000000..2463d7e867 --- /dev/null +++ b/configs/sam4cmp-db/src/Makefile @@ -0,0 +1,41 @@ +############################################################################ +# configs/sam4cmp-db/src/Makefile +# +# Copyright (C) 2016 Masayuki Ishikawa. All rights reserved. +# Author: Masayuki Ishikawa +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +ASRCS = +CSRCS = sam_boot.c + +include $(TOPDIR)/configs/Board.mk diff --git a/configs/sam4cmp-db/src/sam4cmp-db.h b/configs/sam4cmp-db/src/sam4cmp-db.h new file mode 100644 index 0000000000..e665614571 --- /dev/null +++ b/configs/sam4cmp-db/src/sam4cmp-db.h @@ -0,0 +1,68 @@ +/************************************************************************************ + * configs/sam4cmp-db/src/sam4cmp-db.h + * + * Copyright (C) 2016 Masayuki Ishikawa. All rights reserved. + * Author: Masayuki Ishikawa + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_SAM4CMP_DB_SRC_SAM4CMP_DB_H +#define __CONFIGS_SAM4CMP_DB_SRC_SAM4CMP_DB_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include +#include + +#include + +#include +#include + +#include "chip/sam_pinmap.h" + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +/************************************************************************************ + * Public data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_SAM4CMP_DB_SRC_SAM4CMP_DB_H */ diff --git a/configs/sam4cmp-db/src/sam_boot.c b/configs/sam4cmp-db/src/sam_boot.c new file mode 100644 index 0000000000..ee34da638d --- /dev/null +++ b/configs/sam4cmp-db/src/sam_boot.c @@ -0,0 +1,91 @@ +/************************************************************************************ + * configs/sam4cmp-db/src/sam_boot.c + * + * Copyright (C) 2016 Masayuki Ishikawa. All rights reserved. + * Author: Masayuki Ishikawa + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include + +#include + +#include "sam4cmp-db.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: sam_boardinitialize + * + * Description: + * All SAM3/4 architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void sam_boardinitialize(void) +{ +} + +/**************************************************************************** + * Name: board_initialize + * + * Description: + * If CONFIG_BOARD_INITIALIZE is selected, then an additional + * initialization call will be performed in the boot-up sequence to a + * function called board_initialize(). board_initialize() will be + * called immediately after up_intitialize() is called and just before the + * initial application is started. This additional initialization phase + * may be used, for example, to initialize board-specific device drivers. + * + ****************************************************************************/ + +#ifdef CONFIG_BOARD_INITIALIZE +void board_initialize(void) +{ +} +#endif /* CONFIG_BOARD_INITIALIZE */