sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Kinetis:Added configurable 1|2 stop bits

Browse Source 
HAVE_SERIAL_CONSOLE -> HAVE_UART_CONSOLE to bew consistent with
  HAVE_LPUART_CONSOLE naming
This commit is contained in:
David Sidrane 2017-02-23 19:15:49 -10:00
parent dd218ffa8c
commit b553d34a68
1 changed files with 15 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
arch/arm/src/kinetis/kinetis_serial.c
View File

@ -1,8 +1,9 @@
/****************************************************************************
* arch/mips/src/kinetis/kinetis_serial.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Copyright (C) 2011-2012, 2017 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* David Sidrane <david_s5@nscdg.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -240,6 +241,7 @@ struct up_dev_s
uint8_t ie; /* Interrupts enabled */
uint8_t parity; /* 0=none, 1=odd, 2=even */
uint8_t bits; /* Number of bits (8 or 9) */
uint8_t stop2; /* Use 2 stop bits */
};
/****************************************************************************
@ -334,6 +336,7 @@ static struct up_dev_s g_uart0priv =
.irqprio = CONFIG_KINETIS_UART0PRIO,
.parity = CONFIG_UART0_PARITY,
.bits = CONFIG_UART0_BITS,
.stop2 = CONFIG_UART0_2STOP,
};
static uart_dev_t g_uart0port =
@ -368,6 +371,7 @@ static struct up_dev_s g_uart1priv =
.irqprio = CONFIG_KINETIS_UART1PRIO,
.parity = CONFIG_UART1_PARITY,
.bits = CONFIG_UART1_BITS,
.stop2 = CONFIG_UART1_2STOP,
};
static uart_dev_t g_uart1port =
@ -402,6 +406,7 @@ static struct up_dev_s g_uart2priv =
.irqprio = CONFIG_KINETIS_UART2PRIO,
.parity = CONFIG_UART2_PARITY,
.bits = CONFIG_UART2_BITS,
.stop2 = CONFIG_UART2_2STOP,
};
static uart_dev_t g_uart2port =
@ -436,6 +441,7 @@ static struct up_dev_s g_uart3priv =
.irqprio = CONFIG_KINETIS_UART3PRIO,
.parity = CONFIG_UART3_PARITY,
.bits = CONFIG_UART3_BITS,
.stop2 = CONFIG_UART3_2STOP,
};
static uart_dev_t g_uart3port =
@ -470,6 +476,7 @@ static struct up_dev_s g_uart4priv =
.irqprio = CONFIG_KINETIS_UART4PRIO,
.parity = CONFIG_UART4_PARITY,
.bits = CONFIG_UART4_BITS,
.stop2 = CONFIG_UART4_2STOP,
};
static uart_dev_t g_uart4port =
@ -504,6 +511,7 @@ static struct up_dev_s g_uart5priv =
.irqprio = CONFIG_KINETIS_UART5PRIO,
.parity = CONFIG_UART5_PARITY,
.bits = CONFIG_UART5_BITS,
.stop2 = CONFIG_UART5_2STOP,
};
static uart_dev_t g_uart5port =
@ -615,7 +623,7 @@ static int up_setup(struct uart_dev_s *dev)
/* Configure the UART as an RS-232 UART */
kinetis_uartconfigure(priv->uartbase, priv->baud, priv->clock,
priv->parity, priv->bits);
priv->parity, priv->bits, priv->stop2);
#endif
/* Make sure that all interrupts are disabled */
@ -1256,7 +1264,7 @@ void up_earlyserialinit(void)
/* Configuration whichever one is the console */
#ifdef HAVE_SERIAL_CONSOLE
#ifdef HAVE_UART_CONSOLE
CONSOLE_DEV.isconsole = true;
up_setup(&CONSOLE_DEV);
#endif
@ -1275,7 +1283,7 @@ void up_serialinit(void)
{
/* Register the console */
#ifdef HAVE_SERIAL_CONSOLE
#ifdef HAVE_UART_CONSOLE
(void)uart_register("/dev/console", &CONSOLE_DEV);
#endif
@ -1309,7 +1317,7 @@ void up_serialinit(void)
int up_putc(int ch)
{
#ifdef HAVE_SERIAL_CONSOLE
#ifdef HAVE_UART_CONSOLE
struct up_dev_s *priv = (struct up_dev_s *)CONSOLE_DEV.priv;
uint8_t ie;
@ -1342,7 +1350,7 @@ int up_putc(int ch)
int up_putc(int ch)
{
#ifdef HAVE_SERIAL_CONSOLE
#ifdef HAVE_UART_CONSOLE
/* Check for LF */
if (ch == '\n')