sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

boards: mips: nxstyle fixes

Browse Source 
Fixes to pass CI

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This commit is contained in:
Alin Jerpelea 2021-03-16 21:32:54 +01:00 committed by Xiang Xiao
parent 9ced5cae84
commit b5ea69ee78
25 changed files with 163 additions and 109 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
boards/hc/m9s12/demo9s12ne64/include/board.h
View File

@ -43,9 +43,9 @@
/* PLL Settings
*
* SYNR register controls the multiplication factor of the PLL.
* If the PLL is on, the count in the loop divider (SYNR) register effectively
* multiplies up the PLL clock (PLLCLK) from the reference frequency by 2 x
* (SYNR+1).
* If the PLL is on, the count in the loop divider (SYNR) register
* effectively multiplies up the PLL clock (PLLCLK) from the reference
* frequency by 2 x(SYNR+1).
* PLLCLK will not be below the minimum VCO frequency (fSCM).
*
* The REFDV register provides a finer granularity for the PLL multiplier

5
boards/hc/m9s12/demo9s12ne64/src/demo9s12ne64.h
View File

@ -45,14 +45,15 @@
#ifndef __ASSEMBLY__
/****************************************************************************
* Public Functions
* Public Functions Definitions
****************************************************************************/
/****************************************************************************
* Name: hcs12_spidev_initialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the STM3210E-EVAL board.
* Called to configure SPI chip select GPIO pins for the STM3210E-EVAL
* board.
*
****************************************************************************/

11
boards/hc/m9s12/demo9s12ne64/src/m9s12_spi.c
View File

@ -56,7 +56,7 @@ void weak_function hcs12_spidev_initialize(void)
*
* Description:
* The external functions, hcs12_spiselect and hcs12_spistatus must be
* provided by board-specific logic. They are implementations of the select
* provided by board-specific logic. They are implementations of the select
* and status methods of the SPI interface defined by struct spi_ops_s (see
* include/nuttx/spi/spi.h).
* All other methods (including hcs12_spibus_initialize()) are provided by
@ -66,10 +66,10 @@ void weak_function hcs12_spidev_initialize(void)
* 1. Provide logic in hcs12_boardinitialize() to configure SPI chip select
* pins.
* 2. Provide hcs12_spiselect() and hcs12_spistatus() functions in your
* board-specific logic. These functions will perform chip selection and
* board-specific logic. These functions will perform chip selection and
* status operations using GPIOs in the way your board is configured.
* 3. Add a calls to hcs12_spibus_initialize() in your low level application
* initialization logic
* 3. Add a calls to hcs12_spibus_initialize() in your low level
* application initialization logic
* 4. The handle returned by hcs12_spibus_initialize() may then be used to
* bind the SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
@ -77,7 +77,8 @@ void weak_function hcs12_spidev_initialize(void)
*
****************************************************************************/
void hcs12_spiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
void hcs12_spiselect(FAR struct spi_dev_s *dev,
uint32_t devid, bool selected)
{
}

4
boards/hc/m9s12/ne64badge/src/m9s12_boot.c
View File

@ -48,8 +48,8 @@
*
* Description:
* All HCS12 architectures must provide the following entry point.
* This entry point is called early in the initialization - after all memory
* has been configured and mapped but before any devices have been
* This entry point is called early in the initialization - after all
* memory has been configured and mapped but before any devices have been
* initialized.
*
****************************************************************************/

13
boards/hc/m9s12/ne64badge/src/m9s12_spi.c
View File

@ -56,20 +56,20 @@ void weak_function hcs12_spidev_initialize(void)
*
* Description:
* The external functions, hcs12_spiselect and hcs12_spistatus must be
* provided by board-specific logic. They are implementations of the select
* provided by board-specific logic. They are implementations of the select
* and status methods of the SPI interface defined by struct spi_ops_s (see
* include/nuttx/spi/spi.h).
* All other methods (including hcs12_spibus_initialize())
* are provided by common HCS12 logic. To use this common SPI logic on your
* are provided by common HCS12 logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in hcs12_boardinitialize() to configure SPI chip select
* pins.
* 2. Provide hcs12_spiselect() and hcs12_spistatus() functions in your
* board-specific logic. These functions will perform chip selection and
* board-specific logic. These functions will perform chip selection and
* status operations using GPIOs in the way your board is configured.
* 3. Add a calls to hcs12_spibus_initialize() in your low level application
* initialization logic
* 3. Add a calls to hcs12_spibus_initialize() in your low level
* application initialization logic
* 4. The handle returned by hcs12_spibus_initialize() may then be used to
* bind the SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
@ -77,7 +77,8 @@ void weak_function hcs12_spidev_initialize(void)
*
****************************************************************************/
void hcs12_spiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
void hcs12_spiselect(FAR struct spi_dev_s *dev,
uint32_t devid, bool selected)
{
}

5
boards/hc/m9s12/ne64badge/src/ne64badge.h
View File

@ -160,14 +160,15 @@
#ifndef __ASSEMBLY__
/****************************************************************************
* Public Functions
* Public Functions Definitions
****************************************************************************/
/****************************************************************************
* Name: hcs12_spidev_initialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the STM3210E-EVAL board.
* Called to configure SPI chip select GPIO pins for the STM3210E-EVAL
* board.
*
****************************************************************************/

2
boards/mips/pic32mx/mirtoo/include/board.h
View File

@ -93,7 +93,7 @@
* controllable from software.
*/
/* LED index values for use with board_userled() */
/* LED index values for use with board_userled() */
#define PIC32MX_MIRTOO_LED0 0
#define PIC32MX_MIRTOO_LED1 1

1
boards/mips/pic32mx/mirtoo/src/mirtoo.h
View File

@ -30,6 +30,7 @@
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/****************************************************************************

4
boards/mips/pic32mx/mirtoo/src/pic32_adc.c
View File

@ -39,8 +39,8 @@
/* Configuration ************************************************************/
/* The Mirtoo features a PGA117 amplifier/multipexer that can be configured to
* bring any analog signal from PORT0,.. PORT7 to pin 19 of the PIC32MX:
/* The Mirtoo features a PGA117 amplifier/multipexer that can be configured
* to bring any analog signal from PORT0,.. PORT7 to pin 19 of the PIC32MX:
*
* --- ------------------------------------------------ ---------------------
* PIN PIC32 SIGNAL(s) BOARD SIGNAL/USAGE

3
boards/mips/pic32mx/mirtoo/src/pic32_spi2.c
View File

@ -64,7 +64,8 @@
* SCK2 SCK PGA117 and SST25VF032B SPI2 clock
*
* RB7 ~CSAI PGA117 PGA117 chip select (active low)
* RB13 ~CSM SST25VF032B SST25VF032B chip select (active low)
* RB13 ~CSM SST25VF032B SST25VF032B chip select
* (active low)
*/
#define GPIO_SI (GPIO_OUTPUT|GPIO_PORTA|GPIO_PIN1)

10
boards/mips/pic32mx/pic32mx-starterkit/src/pic32mx_spi.c
View File

@ -47,7 +47,8 @@
* Name: pic32mx_spidev_initialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the Sure PIC32MX board.
* Called to configure SPI chip select GPIO pins for the Sure PIC32MX
* board.
*
****************************************************************************/
@ -106,8 +107,10 @@ uint8_t pic32mx_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mx_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
int pic32mx_spi1cmddata(FAR struct spi_dev_s *dev,
uint32_t devid, bool cmd)
{
#warning "Missing logic"
return 0;
@ -130,6 +133,7 @@ uint8_t pic32mx_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mx_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
@ -154,6 +158,7 @@ uint8_t pic32mx_spi3status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mx_spi3cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
@ -178,6 +183,7 @@ uint8_t pic32mx_spi4status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mx_spi4cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{

1
boards/mips/pic32mx/pic32mx7mmb/include/board.h
View File

@ -157,6 +157,7 @@
#define LED_NVALUES 6
/* Switch definitions *******************************************************/
/* The Mikroelektronika PIC32MX7 MMB has a joystick:
*
* ------ -------- --------------------------

57
boards/mips/pic32mx/pic32mx7mmb/src/pic32_mio283qt2.c
View File

@ -59,37 +59,38 @@
/* PIC32MX7MMB LCD Hardware Definitions *************************************/
/* --- ---------------------------------- -------------------- ------------------------
* PIN CONFIGURATIONS SIGNAL NAME ON-BOARD CONNECTIONS
* (Family Data Sheet Table 1-1) (PIC32MX7 Schematic)
* --- ---------------------------------- -------------------- ------------------------
* 6 RC1/T2CK LCD_RST TFT display
* 43 PMA1/AETXD3/AN14/ERXD2/PMALH/RB14 LCD-CS# TFT display, HDR2 pin 3
* 77 OC3/RD2 LCD_BLED LCD backlight LED
* 44 PMA0/AETXD2/AN15/CN12/ERXD3/OCFB/ LCD-RS TFT display
/* --- ---------------------------------- ---------- --------------
* PIN CONFIGURATIONS SIGNAL NAME ON-BOARD
* (Family Data Sheet Table 1-1) (PIC32MX7 CONNECTIONS
* Schematic)
* --- ---------------------------------- ---------- ------------------------
* 6 RC1/T2CK LCD_RST TFT display
* 43 PMA1/AETXD3/AN14/ERXD2/PMALH/RB14 LCD-CS# TFT display, HDR2 pin 3
* 77 OC3/RD2 LCD_BLED LCD backlight LED
* 44 PMA0/AETXD2/AN15/CN12/ERXD3/OCFB/ LCD-RS TFT display
* PMALL/RB15
*
* 34 PMA13/AN10/RB10/CVREFOUT LCD-YD TFT display
* 35 PMA12/AETXERR/AN11/ERXERR/RB11 LCD-XR TFT display
* 41 PMA11/AECRS/AN12/ERXD0/RB12 LCD-YU TFT display
* 42 PMA10/AECOL/AN13/ERXD1/RB13 LCD-XL TFT display
* 34 PMA13/AN10/RB10/CVREFOUT LCD-YD TFT display
* 35 PMA12/AETXERR/AN11/ERXERR/RB11 LCD-XR TFT display
* 41 PMA11/AECRS/AN12/ERXD0/RB12 LCD-YU TFT display
* 42 PMA10/AECOL/AN13/ERXD1/RB13 LCD-XL TFT display
*
* 93 PMD0/RE0 PMPD0 TFT display, HDR1 pin 18
* 94 PMD1/RE1 PMPD1 TFT display, HDR1 pin 17
* 98 PMD2/RE2 PMPD2 TFT display, HDR1 pin 16
* 99 PMD3/RE3 PMPD3 TFT display, HDR1 pin 15
* 100 PMD4/RE4 PMPD4 TFT display, HDR1 pin 14
* 3 PMD5/RE5 PMPD5 TFT display, HDR1 pin 13
* 4 PMD6/RE6 PMPD6 TFT display, HDR1 pin 12
* 5 PMD7/RE7 PMPD7 TFT display, HDR1 pin 11
* 90 PMD8/C2RX/RG0 PMPD8 TFT display, HDR1 pin 10
* 89 PMD9/C2TX/ETXERR/RG1 PMPD9 TFT display, HDR1 pin 9
* 88 PMD10/C1TX/ETXD0/RF1 PMPD10 TFT display, HDR1 pin 8
* 87 PMD11/C1RX/ETXD1/RF0 PMPD11 TFT display, HDR1 pin 7
* 79 PMD12/ETXD2/IC5/RD12 PMPD12 TFT display, HDR1 pin 6
* 80 PMD13/CN19/ETXD3/RD13 PMPD13 TFT display, HDR1 pin 5
* 83 PMD14/CN15/ETXEN/RD6 PMPD14 TFT display, HDR1 pin 4
* 84 PMD15/CN16/ETXCLK/RD7 PMPD15 TFT display, HDR1 pin 3
* 93 PMD0/RE0 PMPD0 TFT display, HDR1 pin 18
* 94 PMD1/RE1 PMPD1 TFT display, HDR1 pin 17
* 98 PMD2/RE2 PMPD2 TFT display, HDR1 pin 16
* 99 PMD3/RE3 PMPD3 TFT display, HDR1 pin 15
* 100 PMD4/RE4 PMPD4 TFT display, HDR1 pin 14
* 3 PMD5/RE5 PMPD5 TFT display, HDR1 pin 13
* 4 PMD6/RE6 PMPD6 TFT display, HDR1 pin 12
* 5 PMD7/RE7 PMPD7 TFT display, HDR1 pin 11
* 90 PMD8/C2RX/RG0 PMPD8 TFT display, HDR1 pin 10
* 89 PMD9/C2TX/ETXERR/RG1 PMPD9 TFT display, HDR1 pin 9
* 88 PMD10/C1TX/ETXD0/RF1 PMPD10 TFT display, HDR1 pin 8
* 87 PMD11/C1RX/ETXD1/RF0 PMPD11 TFT display, HDR1 pin 7
* 79 PMD12/ETXD2/IC5/RD12 PMPD12 TFT display, HDR1 pin 6
* 80 PMD13/CN19/ETXD3/RD13 PMPD13 TFT display, HDR1 pin 5
* 83 PMD14/CN15/ETXEN/RD6 PMPD14 TFT display, HDR1 pin 4
* 84 PMD15/CN16/ETXCLK/RD7 PMPD15 TFT display, HDR1 pin 3
*
* 82 CN14/PMRD/RD5 PMPRD
* 81 CN13/OC5/PMWR/RD4 PMPWR

3
boards/mips/pic32mx/pic32mx7mmb/src/pic32mx7mmb.h
View File

@ -80,7 +80,8 @@
* RD0 SPO1 SD card slot SPI1 data OUT
* RD10 SCK1 SD card slot SD card, SPI clock
*
* RA9 SD_CS# SD card slot SD card, SPI chip select (active low)
* RA9 SD_CS# SD card slot SD card, SPI chip select
* (active low)
* RG6 SD_WP SD card slot SD card, write protect
* RG7 SD_CD# SD card slot SD card, card detect (not)
*/

37
boards/mips/pic32mx/sure-pic32mx/include/board.h
View File

@ -93,22 +93,24 @@
* D9 "Flash" Yellow RF0 Low illuminates
* D10 "Error" Red RF1 Low illuminates
*/
/* ON OFF */
/* USB SD FLASH ERROR USB SD FLASH ERROR */
#define LED_STARTED 0 /* OFF OFF OFF OFF --- --- --- --- */
#define LED_HEAPALLOCATE 1 /* ON OFF N/C N/C --- --- --- --- */
#define LED_IRQSENABLED 2 /* OFF ON N/C N/C --- --- --- --- */
#define LED_STACKCREATED 3 /* ON ON N/C N/C --- --- --- --- */
#define LED_INIRQ 4 /* N/C N/C ON N/C N/C N/C OFF N/C */
#define LED_SIGNAL 4 /* N/C N/C ON N/C N/C N/C OFF N/C */
#define LED_ASSERTION 4 /* N/C N/C ON N/C N/C N/C OFF N/C */
#define LED_PANIC 5 /* N/C N/C N/C ON N/C N/C N/C OFF */
#define LED_NVALUES 6
/* ON OFF */
/* USB SD FLASH ERROR USB SD FLASH ERROR */
#define LED_STARTED 0 /* OFF OFF OFF OFF --- --- --- --- */
#define LED_HEAPALLOCATE 1 /* ON OFF N/C N/C --- --- --- --- */
#define LED_IRQSENABLED 2 /* OFF ON N/C N/C --- --- --- --- */
#define LED_STACKCREATED 3 /* ON ON N/C N/C --- --- --- --- */
#define LED_INIRQ 4 /* N/C N/C ON N/C N/C N/C OFF N/C */
#define LED_SIGNAL 4 /* N/C N/C ON N/C N/C N/C OFF N/C */
#define LED_ASSERTION 4 /* N/C N/C ON N/C N/C N/C OFF N/C */
#define LED_PANIC 5 /* N/C N/C N/C ON N/C N/C N/C OFF */
#define LED_NVALUES 6
/* The Sure DB-DP11212 PIC32 General Purpose Demo Board does not have any
* user controllable LEDs, but does does have a segment LED display.
* That display is however, obscured by the larger segment display attached to
* the board and, so, is not supported.
* That display is however, obscured by the larger segment display attached
* to the board and, so, is not supported.
*/
/* For distinguishing individual LEDs */
@ -122,9 +124,9 @@
/* The Sure PIC32MX board has three buttons.
*
* SW1 (SW_UP, left arrow) RB3 Pulled high, Grounded/low when depressed
* SW2 (SW_DOWN, down/right arrow) RB2 Pulled high, Grounded/low when depressed
* SW3 (SW_OK, right arrow) RB4 Pulled high, Grounded/low when depressed
* SW1 (SW_UP, left arrow) RB3 Pulled high, GND/low when depressed
* SW2 (SW_DOWN, down/right arrow) RB2 Pulled high, GND/low when depressed
* SW3 (SW_OK, right arrow) RB4 Pulled high, GND/low when depressed
*/
#define BUTTON_SW1 0
@ -152,7 +154,8 @@
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
extern "C"
{
#else
#define EXTERN extern
#endif

40
boards/mips/pic32mx/sure-pic32mx/src/pic32mx_lcd1602.c
View File

@ -260,7 +260,8 @@ static void lcd_dumpstream(FAR const char *msg,
static int lcd_getstream(FAR struct lib_instream_s *instream)
{
FAR struct lcd_instream_s *lcdstream = (FAR struct lcd_instream_s *)instream;
FAR struct lcd_instream_s *lcdstream =
(FAR struct lcd_instream_s *)instream;
DEBUGASSERT(lcdstream && lcdstream->buffer);
if (lcdstream->nbytes > 0)
@ -564,7 +565,9 @@ static void lcd_action(enum slcdcode_e code, uint8_t count)
{
int tmp;
/* If we are at the home position or if the count is zero, then ignore the action */
/* If we are at the home position or if the count is zero,
* then ignore the action
*/
if (g_lcd1602.curcol < 1 || count < 1)
{
@ -603,7 +606,9 @@ static void lcd_action(enum slcdcode_e code, uint8_t count)
nchars = LCD_NCOLUMNS - g_lcd1602.curcol;
nmove = MIN(nchars, count) - 1;
/* Move all characters after the current cursor position left by 'nmove' characters */
/* Move all characters after the current cursor position left by
* 'nmove' characters
*/
for (i = g_lcd1602.curcol + nmove; i < LCD_NCOLUMNS - 1; i++)
{
@ -636,7 +641,9 @@ static void lcd_action(enum slcdcode_e code, uint8_t count)
last = LCD_NCOLUMNS - 1;
}
/* Erase N characters after the current cursor position left by one */
/* Erase N characters after the current cursor position left by
* one
*/
for (i = g_lcd1602.curcol; i < last; i++)
{
@ -662,7 +669,9 @@ static void lcd_action(enum slcdcode_e code, uint8_t count)
{
int i;
/* Erase characters after the current cursor position to the end of the line */
/* Erase characters after the current cursor position to the end of
* the line
*/
for (i = g_lcd1602.curcol; i < LCD_NCOLUMNS; i++)
{
@ -834,7 +843,8 @@ static ssize_t lcd_write(FAR struct file *filep, FAR const char *buffer,
/* Now decode and process every byte in the input buffer */
memset(&state, 0, sizeof(struct slcdstate_s));
while ((result = slcd_decode(&instream.stream, &state, &ch, &count)) != SLCDRET_EOF)
while ((result = slcd_decode(&instream.stream,
&state, &ch, &count)) != SLCDRET_EOF)
{
lcdinfo("slcd_decode returned result=%d char=%d count=%d\n",
result, ch, count);
@ -910,7 +920,8 @@ static int lcd_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
case SLCDIOC_GETATTRIBUTES:
{
FAR struct slcd_attributes_s *attr = (FAR struct slcd_attributes_s *)((uintptr_t)arg);
FAR struct slcd_attributes_s *attr =
(FAR struct slcd_attributes_s *)((uintptr_t)arg);
lcdinfo("SLCDIOC_GETATTRIBUTES:\n");
@ -935,9 +946,11 @@ static int lcd_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
case SLCDIOC_CURPOS:
{
FAR struct slcd_curpos_s *curpos = (FAR struct slcd_curpos_s *)((uintptr_t)arg);
FAR struct slcd_curpos_s *curpos =
(FAR struct slcd_curpos_s *)((uintptr_t)arg);
lcdinfo("SLCDIOC_CURPOS: row=%d column=%d\n", g_lcd1602.currow, g_lcd1602.curcol);
lcdinfo("SLCDIOC_CURPOS: row=%d column=%d\n",
g_lcd1602.currow, g_lcd1602.curcol);
if (!curpos)
{
@ -1007,12 +1020,13 @@ static int lcd_poll(FAR struct file *filep, FAR struct pollfd *fds,
{
/* Data is always available to be read */
fds->revents |= (fds->events & (POLLIN|POLLOUT));
fds->revents |= (fds->events & (POLLIN | POLLOUT));
if (fds->revents != 0)
{
nxsem_post(fds->sem);
}
}
return OK;
}
@ -1054,7 +1068,7 @@ int up_lcd1602_initialize(void)
g_lcd1602.brightness = 0; /* Remember the light is off */
/* A small delay is necessary between when GPIO_LCD_E was set up as an
* output with initial value of 0 and this operation. That delay should
* output with initial value of 0 and this operation. That delay should
* be well covered by the intervening GPIO configurations.
*/
@ -1066,8 +1080,8 @@ int up_lcd1602_initialize(void)
up_mdelay(5);
/* Select the 8-bit interface. BF cannot be checked before this command.
* This needs to be done a few times with some magic delays.
/* Select the 8-bit interface. BF cannot be checked before this
* command. This needs to be done a few times with some magic delays.
*
* Function set: 5x7 Style | N=2R | DL=8D
*/

7
boards/mips/pic32mx/sure-pic32mx/src/pic32mx_spi.c
View File

@ -112,14 +112,15 @@
* Name: pic32mx_spidev_initialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the Sure PIC32MX board.
* Called to configure SPI chip select GPIO pins for the Sure PIC32MX
* board.
*
****************************************************************************/
void weak_function pic32mx_spidev_initialize(void)
{
/* Configure the SPI2 chip select (CS) GPIO output, and the card detect (CD)
* and write protect (WP) inputs.
/* Configure the SPI2 chip select (CS) GPIO output, and the card detect
* (CD) and write protect (WP) inputs.
*/
#ifdef PIC32_HAVE_SD

8
boards/mips/pic32mz/flipnclick-pic32mz/include/board.h
View File

@ -279,10 +279,10 @@
* 2) Mikroe Click Serial Shield. There are four Click bus connectors with
* serial ports available as follows:
*
* Click A: UART4 UART4_RX and UART4_TX which are RG9 and RE3, respectively.
* Click B: UART3 UART3_RX and UART3_TX which are RF0 and RF1, respectively.
* Click C: UART1 UART1_RX and UART1_TX which are RC1 and RE5, respectively.
* Click D: UART2 UART2_RX and UART2_TX which are RC3 and RC2, respectively.
* Click A: UART4 UART4_RX and UART4_TX which are RG9 and RE3, respectively.
* Click B: UART3 UART3_RX and UART3_TX which are RF0 and RF1, respectively.
* Click C: UART1 UART1_RX and UART1_TX which are RC1 and RE5, respectively.
* Click D: UART2 UART2_RX and UART2_TX which are RC3 and RC2, respectively.
*/
#define BOARD_U1RX_PPS U1RXR_RPC1

4
boards/mips/pic32mz/flipnclick-pic32mz/src/pic32mz_appinit.c
View File

@ -61,8 +61,8 @@
int board_app_initialize(uintptr_t arg)
{
/* If CONFIG_BOARD_LATE_INITIALIZE is selected then board initialization was
* already performed in board_late_initialize.
/* If CONFIG_BOARD_LATE_INITIALIZE is selected then board initialization
* was already performed in board_late_initialize.
*/
#ifndef CONFIG_BOARD_LATE_INITIALIZE

9
boards/mips/pic32mz/flipnclick-pic32mz/src/pic32mz_autoleds.c
View File

@ -102,7 +102,14 @@
static void board_autoled_setone(int ledndx)
{
bool ledon[NLEDS] = {false, false, false, false, false};
bool ledon[NLEDS] =
{
false,
false,
false,
false,
false
};
ledon[ledndx] = true;
pic32mz_gpiowrite(GPIO_LED_L, ledon[INDEX_LED_L]);

8
boards/mips/pic32mz/flipnclick-pic32mz/src/pic32mz_boot.c
View File

@ -40,9 +40,9 @@
*
* Description:
* All PIC32MZ architectures must provide the following entry point.
* This entry point is called early in the initialization -- after all memory
* has been configured and mapped but before any devices have been
* initialized.
* This entry point is called early in the initialization -- after all
* memory has been configured and mapped but before any devices have been
* initialized.
*
****************************************************************************/
@ -73,7 +73,7 @@ void pic32mz_boardinitialize(void)
* Description:
* If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional
* initialization call will be performed in the boot-up sequence to a
* function called board_late_initialize(). board_late_initialize() will be
* function called board_late_initialize(). board_late_initialize() will be
* called immediately after up_initialize() is called and just before the
* initial application is started. This additional initialization phase
* may be used, for example, to initialize board-specific device drivers.

15
boards/mips/pic32mz/flipnclick-pic32mz/src/pic32mz_spi.c
View File

@ -47,7 +47,8 @@
* Name: pic32mz_spidev_initialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the Sure PIC32MZ board.
* Called to configure SPI chip select GPIO pins for the Sure PIC32MZ
* board.
*
****************************************************************************/
@ -85,8 +86,8 @@ void weak_function pic32mz_spidev_initialize(void)
* the way your board is configured.
* 3. Add a call to pic32mz_spibus_initialize() in your low level
* application initialization logic
* 4. The handle returned by pic32mz_spibus_initialize() may then be used to
* bind the SPI driver to higher level logic (e.g., calling
* 4. The handle returned by pic32mz_spibus_initialize() may then be used
* to bind the SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
@ -119,6 +120,7 @@ uint8_t pic32mz_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
spiinfo("Returning nothing\n");
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
@ -132,8 +134,8 @@ int pic32mz_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
pic32mz_gpiowrite(GPIO_SSD1306_DC, !cmd);
}
#endif
#endif
return 0;
}
#endif
@ -164,6 +166,7 @@ uint8_t pic32mz_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
spiinfo("Returning nothing\n");
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi2cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
@ -197,6 +200,7 @@ uint8_t pic32mz_spi3status(FAR struct spi_dev_s *dev, uint32_t devid)
spiinfo("Returning nothing\n");
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi3cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
@ -218,6 +222,7 @@ uint8_t pic32mz_spi4status(FAR struct spi_dev_s *dev, uint32_t devid)
spiinfo("Returning nothing\n");
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi4cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
@ -240,6 +245,7 @@ uint8_t pic32mz_spi5status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi5cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
@ -264,6 +270,7 @@ uint8_t pic32mz_spi6status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi6cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{

4
boards/mips/pic32mz/pic32mz-starterkit/src/pic32mz_appinit.c
View File

@ -61,8 +61,8 @@
int board_app_initialize(uintptr_t arg)
{
/* If CONFIG_BOARD_LATE_INITIALIZE is selected then board initialization was
* already performed in board_late_initialize.
/* If CONFIG_BOARD_LATE_INITIALIZE is selected then board initialization
* was already performed in board_late_initialize.
*/
#ifndef CONFIG_BOARD_LATE_INITIALIZE

2
boards/mips/pic32mz/pic32mz-starterkit/src/pic32mz_boot.c
View File

@ -81,7 +81,7 @@ void pic32mz_boardinitialize(void)
* Description:
* If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional
* initialization call will be performed in the boot-up sequence to a
* function called board_late_initialize(). board_late_initialize() will be
* function called board_late_initialize(). board_late_initialize() will be
* called immediately after up_initialize() is called and just before the
* initial application is started. This additional initialization phase
* may be used, for example, to initialize board-specific device drivers.

13
boards/mips/pic32mz/pic32mz-starterkit/src/pic32mz_spi.c
View File

@ -45,7 +45,8 @@
* Name: pic32mz_spidev_initialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the Sure PIC32MZ board.
* Called to configure SPI chip select GPIO pins for the Sure PIC32MZ
* board.
*
****************************************************************************/
@ -76,8 +77,8 @@ void weak_function pic32mz_spidev_initialize(void)
* configured.
* 2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide
* pic32mz_spiNcmddata() functions in your board-specific logic.
* These functions will perform cmd/data selection operations using GPIOs
* in the way your board is configured.
* These functions will perform cmd/data selection operations using
* GPIOs in the way your board is configured.
* 3. Add a call to pic32mz_spibus_initialize() in your low level
* application initialization logic
* 4. The handle returned by pic32mz_spibus_initialize() may then be used
@ -104,6 +105,7 @@ uint8_t pic32mz_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
@ -128,6 +130,7 @@ uint8_t pic32mz_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi2cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
@ -152,6 +155,7 @@ uint8_t pic32mz_spi3status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi3cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
@ -176,6 +180,7 @@ uint8_t pic32mz_spi4status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi4cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
@ -200,6 +205,7 @@ uint8_t pic32mz_spi5status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi5cmddata(FAR struct spi_dev_s *dev, uint32_t devid,
bool cmd)
@ -225,6 +231,7 @@ uint8_t pic32mz_spi6status(FAR struct spi_dev_s *dev, uint32_t devid)
#warning "Missing logic"
return 0;
}
#ifdef CONFIG_SPI_CMDDATA
int pic32mz_spi6cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{