configs/stm3240g-eval: Add support for pdcurses and the pdcurses demo programs in the 'fb' configuration.

configs/open1788/README.txt

@@ -520,7 +520,7 @@ Configuration Directories
   -------
 
     A simple NSH configuration used for some basic (non-graphic) debug of
-    the pdcurses librawry on top of a framebuffer character drivers.  This
+    the pdcurses library on top of a framebuffer character drivers.  This
     configuration provides the test programs from:
 
       - apps/examples/pdcurses,

configs/stm3240g-eval/README.txt

@@ -943,14 +943,31 @@ Where <subdir> is one of the following:
   --
 
     A simple NSH configuration used for some basic (non-graphic) debug of
-    the framebuffer character driver at drivers/video/fb.c using test at
+    the framebuffer character driver at drivers/video/fb.c.  NOTE that
-    apps/examples/fb.  The STM3240G-EVAL LCD driver does not support a
+    the STM3240G-EVAL LCD driver does not support a framebuffer!  It
-    framebuffer!  This configuration uses the LCD framebuffer front end at
+    interfaces with the LCD through a parallel FSMC interface.  This
+    configuration uses the LCD framebuffer front end at
     drivers/lcd/lcd_framebuffer to convert the LCD interface into a
     compatible framebuffer interface.
 
+    This examples supports the framebuffer test at apps/examples/fb.  That
+    test simply draws a pattern into the framebuffer and updates the LCD.
+
+    This example also supports the pdcurses library at apps/graphics/pdcurses
+    and the demo programs at apps/examples/pdcurses.  This is a good test of
+    the use of the framebuffer driver in an application.  Many of the
+    pdcurses demos requires user interaction via a mouse, keyboard, or
+    joystick.  No input devices are currently present in the configuration
+    so no such interaction is possible.
+
+    The STM3240G-EVAL does provide a on-board discrete joystick (djoystick)
+    that could be used for this interaction.  However, those discrete inputs
+    do not go directly to the STM32 but rather go indirectly through an I/O
+    expander.  I just have not had the motivation to deal with that yet.
+
     STATUS:
     2017-09-17:  This configuration appears to be fully functional.
+    2017-11-25:  Non-interactive pdcurses examples added.
 
   knxwm:
   -----

configs/stm3240g-eval/fb/defconfig

@@ -1,11 +1,4 @@
 # CONFIG_ARCH_FPU is not set
-# CONFIG_NSH_DISABLE_IFCONFIG is not set
-# CONFIG_NSH_DISABLE_PS is not set
-# CONFIG_NX_DISABLE_16BPP is not set
-# CONFIG_NX_PACKEDMSFIRST is not set
-# CONFIG_NX_WRITEONLY is not set
-# CONFIG_NXFONTS_DISABLE_16BPP is not set
-# CONFIG_NXTK_DEFAULT_BORDERCOLORS is not set
 CONFIG_ARCH_BOARD_STM3240G_EVAL=y
 CONFIG_ARCH_BOARD="stm3240g-eval"
 CONFIG_ARCH_CHIP_STM32=y
@@ -18,6 +11,10 @@ CONFIG_BUILTIN=y
 CONFIG_DISABLE_POLL=y
 CONFIG_DRIVERS_VIDEO=y
 CONFIG_EXAMPLES_FB=y
+CONFIG_EXAMPLES_NSH=y
+CONFIG_EXAMPLES_PDCURSES=y
+CONFIG_FS_PROCFS=y
+CONFIG_GRAPHICS_PDCURSES=y
 CONFIG_HAVE_CXX=y
 CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_HEAP2_BASE=0x64000000
@@ -30,26 +27,25 @@ CONFIG_LCD_FRAMEBUFFER=y
 CONFIG_LCD_MAXCONTRAST=1
 CONFIG_LCD_NOGETRUN=y
 CONFIG_LCD=y
-CONFIG_LIB_BOARDCTL=y
 CONFIG_MAX_TASKS=16
 CONFIG_MAX_WDOGPARMS=2
 CONFIG_MM_REGIONS=3
 CONFIG_MQ_MAXMSGSIZE=64
 CONFIG_NFILE_DESCRIPTORS=12
 CONFIG_NFILE_STREAMS=12
+CONFIG_NSH_ARCHINIT=y
 CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_LIBRARY=y
 CONFIG_NSH_LINELEN=64
 CONFIG_NSH_READLINE=y
-CONFIG_NX_BLOCKING=y
+CONFIG_NXFONTS_DISABLE_1BPP=y
-CONFIG_NX_KBD=y
+CONFIG_NXFONTS_DISABLE_24BPP=y
-CONFIG_NX_XYINPUT_MOUSE=y
+CONFIG_NXFONTS_DISABLE_2BPP=y
-CONFIG_NX=y
+CONFIG_NXFONTS_DISABLE_32BPP=y
-CONFIG_NXFONT_SANS23X27=y
+CONFIG_NXFONTS_DISABLE_4BPP=y
-CONFIG_NXTK_BORDERCOLOR1=0xad55
+CONFIG_NXFONTS_DISABLE_8BPP=y
-CONFIG_NXTK_BORDERCOLOR2=0x6b4d
+CONFIG_PDCURSES_FONT_6X9=y
-CONFIG_NXTK_BORDERCOLOR3=0xdedb
 CONFIG_PREALLOC_MQ_MSGS=8
 CONFIG_PREALLOC_TIMERS=4
 CONFIG_PREALLOC_WDOGS=8
@@ -73,6 +69,6 @@ CONFIG_TASK_NAME_SIZE=0
 CONFIG_USART3_RXBUFSIZE=128
 CONFIG_USART3_SERIAL_CONSOLE=y
 CONFIG_USART3_TXBUFSIZE=128
-CONFIG_USER_ENTRYPOINT="fb_main"
+CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_VIDEO_FB=y
 CONFIG_WDOG_INTRESERVE=1