Add support for R61505U LCD controller on HY-mini STM32v board

ChangeLog

@@ -4717,3 +4717,6 @@
 	  definitions.  From Laurent Latil (2013-5-15).
 	* configs/hymini-stm32v:  Enable SDIO in nsh2 configuration; remove
 	  warning from src/up_ssd1289.c.  From Laurent Latil (2013-5-15).
+	* configs/hymini-stm32v/src/up_r61505u.c:   Support for the R65105-
+	  based LCD that comes with some HY-Mini STM32v board.  From Christian
+	  Faure (2013-5-16).

configs/hymini-stm32v/Kconfig

@@ -4,4 +4,13 @@
 #
 
 if ARCH_BOARD_HYMINI_STM32V
+
+config LCD_R61505U
+	bool "LCD Based on R61505U LCD Controller"
+	default n
+	depends on NX_LCDDRIVER && !LCD_SSD1289
+	---help---
+		Enables HY-Mini STM32v support for any LCD based on the R61505U,
+		LCD Controller.
+
 endif

configs/hymini-stm32v/src/Makefile

@@ -43,8 +43,12 @@ AOBJS		= $(ASRCS:.S=$(OBJEXT))
 
 CSRCS		= up_boot.c up_leds.c up_buttons.c up_spi.c up_usbdev.c
 
-ifeq ($(CONFIG_NX_LCDDRIVER),y)
+ifeq ($(CONFIG_LCD_SSD1289),y)
 CSRCS		+= up_ssd1289.c
+else
+ifeq ($(CONFIG_LCD_R61505U),y)
+CSRCS		+= up_r61505u.c
+endif
 endif
 
 ifeq ($(CONFIG_NSH_ARCHINIT),y)

configs/pirelli_dpl10/README.txt

@@ -156,20 +156,22 @@ Memory Map
 
   Code can be loaded by the CalypsoBootloader only into HRAM beginning at
   address 0x00820000 and, hence, is restricted to 128KB (including then
-  non-loaded sections:  uninitialized data and for the NuttX heap).
+  non-loaded sections:  Uninitialized data and the NuttX heap).
 
+  SDRAM and NOR FLASH
+  -------------------
+  SDRAM is provided  by a Flash/SRAM: Spansion S71PL129NC0 part that provices
+  128MBit (16MB) of FLASH and 64MBit (8MB) of SDRAM.
+
+  *  SDRAM
 
-  SDRAM
-  -----
     The Pirelli DP-L10 has 8MB of SDRAM beginning at address 0x01000000.
     This DRAM appears to be initialized by the Pirelli ROM loader and is
     ready for use with no further initialization required.
 
-  NOR FLASH
-  ---------
-  There is non-volatile memory at address 0x00000000.  The other Calypso
-  phones have NOR FLASH at this location.  This needs more investigation
-  for the Pirelli phones.
+  * NOR FLASH
+
+    The 16MB FLASH is at address 0x00000000.
 
 USB Serial Console
 ==================

drivers/lcd/README.txt

@@ -174,6 +174,10 @@ that makes then less re-usable:
       AM-240320D5TOQW01H (LCD_ILI9325)
     configs/shenzhou/src/up_ili93xx.c. Another ILI93xx driver.
 
+  R61505U
+
+    configs/hymini-stm32v/src/up_r61505u.c
+
   OLEDs:
 
     configs/stm32f4discovery/src/up_ug2864ambag01.c