boards: maix-bit: Add support for PROTECTED build

This commit is contained in:
Masayuki Ishikawa 2020-02-14 16:11:56 +09:00 committed by patacongo
parent 382cc29c72
commit bb68a12c95
6 changed files with 411 additions and 0 deletions

View File

@ -0,0 +1,55 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_STANDARD_SERIAL is not set
CONFIG_ARCH="risc-v"
CONFIG_ARCH_BOARD="maix-bit"
CONFIG_ARCH_BOARD_MAIX_BIT=y
CONFIG_ARCH_CHIP="k210"
CONFIG_ARCH_CHIP_K210=y
CONFIG_ARCH_INTERRUPTSTACK=2048
CONFIG_ARCH_RISCV=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARCH_USE_MPU=y
CONFIG_BOARD_LOOPSPERMSEC=46000
CONFIG_BUILD_PROTECTED=y
CONFIG_BUILTIN=y
CONFIG_DEBUG_ASSERTIONS=y
CONFIG_DEBUG_ERROR=y
CONFIG_DEBUG_FEATURES=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEV_ZERO=y
CONFIG_FS_PROCFS=y
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_INTELHEX_BINARY=y
CONFIG_LIBC_PERROR_STDOUT=y
CONFIG_LIBC_STRERROR=y
CONFIG_MAX_TASKS=64
CONFIG_MAX_WDOGPARMS=2
CONFIG_MM_KERNEL_HEAPSIZE=524288
CONFIG_NFILE_STREAMS=8
CONFIG_NUTTX_USERSPACE=0x80100000
CONFIG_PASS1_BUILDIR="boards/risc-v/k210/maix-bit/kernel"
CONFIG_PREALLOC_TIMERS=4
CONFIG_PREALLOC_WDOGS=16
CONFIG_RAM_SIZE=2097152
CONFIG_RAM_START=0x80400000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=14
CONFIG_START_MONTH=2
CONFIG_START_YEAR=2020
CONFIG_SYS_RESERVED=8
CONFIG_TASK_NAME_SIZE=20
CONFIG_TESTING_OSTEST=y
CONFIG_UART0_SERIAL_CONSOLE=y
CONFIG_USERMAIN_STACKSIZE=3072
CONFIG_USER_ENTRYPOINT="ostest_main"
CONFIG_WDOG_INTRESERVE=0

View File

@ -0,0 +1 @@
/nuttx_user.elf

View File

@ -0,0 +1,107 @@
############################################################################
# boards/risc-v/k210/maix-bit/kernel/Makefile
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################
-include $(TOPDIR)/Make.defs
# This is the directory for the board-specific header files
BOARD_INCLUDE = $(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH)$(DELIM)$(CONFIG_ARCH_CHIP)$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)include
# The entry point name (if none is provided in the .config file)
CONFIG_USER_ENTRYPOINT ?= user_start
ENTRYPT = $(patsubst "%",%,$(CONFIG_USER_ENTRYPOINT))
# Get the paths to the libraries and the links script path in format that
# is appropriate for the host OS
ifeq ($(WINTOOL),y)
# Windows-native toolchains
USER_LIBPATHS = ${shell for path in $(USERLIBS); do dir=`dirname $(TOPDIR)$(DELIM)$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH)$(DELIM)$(CONFIG_ARCH_CHIP)$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
USER_LDSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH)$(DELIM)$(CONFIG_ARCH_CHIP)$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld}"
USER_HEXFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.hex}"
USER_SRECFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.srec}"
USER_BINFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.bin}"
else
# Linux/Cygwin-native toolchain
USER_LIBPATHS = $(addprefix -L$(TOPDIR)$(DELIM),$(dir $(USERLIBS)))
USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH)$(DELIM)$(CONFIG_ARCH_CHIP)$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
USER_LDSCRIPT += -T$(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH)$(DELIM)$(CONFIG_ARCH_CHIP)$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld
USER_HEXFILE += "$(TOPDIR)$(DELIM)nuttx_user.hex"
USER_SRECFILE += "$(TOPDIR)$(DELIM)nuttx_user.srec"
USER_BINFILE += "$(TOPDIR)$(DELIM)nuttx_user.bin"
endif
USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT)
USER_LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(USERLIBS))))
USER_LIBGCC = "${shell "$(CC)" $(ARCHCPUFLAGS) -print-libgcc-file-name}"
# Source files
CSRCS = k210_userspace.c
COBJS = $(CSRCS:.c=$(OBJEXT))
OBJS = $(COBJS)
# Targets:
all: $(TOPDIR)$(DELIM)nuttx_user.elf $(TOPDIR)$(DELIM)User.map
.PHONY: nuttx_user.elf depend clean distclean
$(COBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
# Create the nuttx_user.elf file containing all of the user-mode code
nuttx_user.elf: $(OBJS)
$(Q) $(LD) -o $@ $(USER_LDFLAGS) $(USER_LIBPATHS) $(OBJS) --start-group $(USER_LDLIBS) --end-group $(USER_LIBGCC)
$(TOPDIR)$(DELIM)nuttx_user.elf: nuttx_user.elf
@echo "LD: nuttx_user.elf"
$(Q) cp -a nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.elf
ifeq ($(CONFIG_INTELHEX_BINARY),y)
@echo "CP: nuttx_user.hex"
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(USER_HEXFILE)
endif
ifeq ($(CONFIG_MOTOROLA_SREC),y)
@echo "CP: nuttx_user.srec"
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(USER_SRECFILE)
endif
ifeq ($(CONFIG_RAW_BINARY),y)
@echo "CP: nuttx_user.bin"
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(USER_BINFILE)
endif
$(TOPDIR)$(DELIM)User.map: nuttx_user.elf
@echo "MK: User.map"
$(Q) $(NM) -n nuttx_user.elf >$(TOPDIR)$(DELIM)User.map
$(Q) $(CROSSDEV)size nuttx_user.elf
.depend:
depend: .depend
clean:
$(call DELFILE, nuttx_user.elf)
$(call DELFILE, "$(TOPDIR)$(DELIM)nuttx_user.*")
$(call DELFILE, "$(TOPDIR)$(DELIM)User.map")
$(call CLEAN)
distclean: clean

View File

@ -0,0 +1,117 @@
/****************************************************************************
* boards/risc-v/k210/maix-bit/kernel/k210_userspace.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdlib.h>
#include <nuttx/arch.h>
#include <nuttx/mm/mm.h>
#include <nuttx/wqueue.h>
#include <nuttx/userspace.h>
#if defined(CONFIG_BUILD_PROTECTED) && !defined(__KERNEL__)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_NUTTX_USERSPACE
# error "CONFIG_NUTTX_USERSPACE not defined"
#endif
#if CONFIG_NUTTX_USERSPACE != 0x80100000
# error "CONFIG_NUTTX_USERSPACE must match the value in memory.ld"
#endif
/****************************************************************************
* Public Data
****************************************************************************/
/* These 'addresses' of these values are setup by the linker script.
* They are not actual uint32_t storage locations!
* They are only used meaningfully in the following way:
*
* - The linker script defines, for example, the symbol_sdata.
* - The declaration extern uint32_t _sdata; makes C happy. C will believe
* that the value _sdata is the address of a uint32_t variable _data
* (it is not!).
* - We can recover the linker value then by simply taking the address of
* of _data. like: uint32_t *pdata = &_sdata;
*/
extern uint32_t _stext; /* Start of .text */
extern uint32_t _etext; /* End_1 of .text + .rodata */
extern const uint32_t _eronly; /* End+1 of read only section */
extern uint32_t _sdata; /* Start of .data */
extern uint32_t _edata; /* End+1 of .data */
extern uint32_t _sbss; /* Start of .bss */
extern uint32_t _ebss; /* End+1 of .bss */
/* This is the user space entry point */
int CONFIG_USER_ENTRYPOINT(int argc, char *argv[]);
const struct userspace_s userspace __attribute__ ((section (".userspace"))) =
{
/* General memory map */
.us_entrypoint = (main_t)CONFIG_USER_ENTRYPOINT,
.us_textstart = (uintptr_t)&_stext,
.us_textend = (uintptr_t)&_etext,
.us_datasource = (uintptr_t)&_eronly,
.us_datastart = (uintptr_t)&_sdata,
.us_dataend = (uintptr_t)&_edata,
.us_bssstart = (uintptr_t)&_sbss,
.us_bssend = (uintptr_t)&_ebss,
/* Memory manager heap structure */
.us_heap = &g_mmheap,
/* Task/thread startup routines */
.task_startup = task_startup,
#ifndef CONFIG_DISABLE_PTHREAD
.pthread_startup = pthread_startup,
#endif
/* Signal handler trampoline */
.signal_handler = up_signal_handler,
/* User-space work queue support (declared in include/nuttx/wqueue.h) */
#ifdef CONFIG_LIB_USRWORK
.work_usrstart = work_usrstart,
#endif
};
/****************************************************************************
* Public Functions
****************************************************************************/
#endif /* CONFIG_BUILD_PROTECTED && !__KERNEL__ */

View File

@ -0,0 +1,37 @@
/****************************************************************************
* boards/risc-v/k210/maix-bit/scripts/memory.ld
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* Reg Access Start addr End addr Size
* MEM0 CPU w/ cache 0x80000000 - 0x803fffff : 4MB
* MEM1 CPU w/ cache 0x80400000 - 0x805fffff : 2MB
* MEM0 CPU w/o cache 0x40000000 - 0x403fffff : 4MB
* MEM1 CPU w/o cache 0x40400000 - 0x405fffff : 4MB
*/
MEMORY
{
kflash (rx) : ORIGIN = 0x80000000, LENGTH = 1024K /* w/ cache */
uflash (rx) : ORIGIN = 0x80100000, LENGTH = 1024K /* w/ cache */
xflash (rx) : ORIGIN = 0x80200000, LENGTH = 2048K /* w/ cache */
ksram (rwx) : ORIGIN = 0x80400000, LENGTH = 512K /* w/ cache */
usram (rwx) : ORIGIN = 0x80480000, LENGTH = 512K /* w/ cache */
xsram (rwx) : ORIGIN = 0x80500000, LENGTH = 1024K /* w/ cache */
}

View File

@ -0,0 +1,94 @@
/****************************************************************************
* boards/risc-v/k210/maix-bit/scripts/user-space.ld
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* NOTE: This depends on the memory.ld script having been included prior to
* this script.
*/
OUTPUT_ARCH("riscv")
SECTIONS
{
.userspace : {
*(.userspace)
} > uflash
.text : {
_stext = ABSOLUTE(.);
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > uflash
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > uflash
__exidx_start = ABSOLUTE(.);
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.sdata .sdata.* .sdata2.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
. = ALIGN(4);
_edata = ABSOLUTE(.);
} > usram AT > uflash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.sbss .sbss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > usram
/* Stabs debugging sections */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}