sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

S32K1XX: Add LPI2C slave support

Browse Source
This commit is contained in:
Jari van Ewijk 2021-09-22 10:26:45 +02:00 committed by Xiang Xiao
parent 962059f843
commit bbb2f1f8c7
5 changed files with 1086 additions and 47 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
arch/arm/src/s32k1xx/Kconfig
View File

@ -272,12 +272,12 @@ config S32K1XX_FTM7
select S32K1XX_FTM
depends on S32K1XX_HAVE_FTM7
menuconfig S32K1XX_LPI2C0
config S32K1XX_LPI2C0
bool "LPI2C0"
default n
select S32K1XX_LPI2C
menuconfig S32K1XX_LPI2C1
config S32K1XX_LPI2C1
bool "LPI2C1"
default n
select S32K1XX_LPI2C
@ -627,7 +627,7 @@ config S32K1XX_LPSPI_DWORD
endmenu # LPSPI Configuration
menu "LPI2C0 Configuration"
menu "LPI2C0 Master Configuration"
depends on S32K1XX_LPI2C0
config LPI2C0_BUSYIDLE
@ -642,9 +642,26 @@ config LPI2C0_FILTSDA
int "I2C master digital glitch filters for SDA input in clock cycles"
default 0
endmenu # LPI2C0 Configuration
endmenu # LPI2C0 Master Configuration
menu "LPI2C1 Configuration"
menu "LPI2C0 Slave Configuration"
depends on S32K1XX_LPI2C0
config LPI2C0_SLAVE_ADDRESS
int "7-bit I2C address in decimal"
default 8
range 8 119
config LPI2C0_SLAVE_BUS
bool "Separate I2C slave bus"
default n
---help---
When selected, the LPI2C slave will use separate SDA/SCL pins from
the LPI2C master. These pins need to be defined in the board.h.
endmenu # LPI2C0 Slave Configuration
menu "LPI2C1 Master Configuration"
depends on S32K1XX_LPI2C1
config LPI2C1_BUSYIDLE
@ -659,7 +676,24 @@ config LPI2C1_FILTSDA
int "I2C master digital glitch filters for SDA input in clock cycles"
default 0
endmenu # LPI2C1 Configuration
endmenu # LPI2C1 Master Configuration
menu "LPI2C1 Slave Configuration"
depends on S32K1XX_LPI2C1
config LPI2C1_SLAVE_ADDRESS
int "7-bit I2C address in decimal"
default 9
range 8 119
config LPI2C1_SLAVE_BUS
bool "Separate I2C slave bus"
default n
---help---
When selected, the LPI2C slave will use separate SDA/SCL pins from
the LPI2C master. These pins need to be defined in the board.h.
endmenu # LPI2C1 Slave Configuration
menu "Ethernet Configuration"
depends on S32K1XX_ENET

1
arch/arm/src/s32k1xx/Make.defs
View File

@ -67,6 +67,7 @@ endif
ifeq ($(CONFIG_S32K1XX_LPI2C),y)
CHIP_CSRCS += s32k1xx_lpi2c.c
CHIP_CSRCS += s32k1xx_lpi2c_slave.c
endif
ifeq ($(CONFIG_S32K1XX_LPSPI),y)

59
arch/arm/src/s32k1xx/s32k1xx_lpi2c.c
View File

@ -105,22 +105,11 @@
# define CONFIG_I2C_NTRACE 32
#endif
#ifdef CONFIG_I2C_SLAVE
# error I2C slave logic is not supported yet for S32K1XX
#endif
#define LPI2C_MASTER 1
#define LPI2C_SLAVE 2
#define MKI2C_OUTPUT(p) (((p) & GPIO_PADMUX_MASK) | \
IOMUX_OPENDRAIN | IOMUX_DRIVE_33OHM | \
IOMUX_SLEW_SLOW | (5 << GPIO_ALT_SHIFT) | \
IOMUX_PULL_NONE | GPIO_OUTPUT_ONE)
#define MKI2C_INPUT(p) (((p) & GPIO_PADMUX_MASK) | \
IOMUX_DRIVE_HIZ | IOMUX_SLEW_SLOW | \
IOMUX_CMOS_INPUT | (5 << GPIO_ALT_SHIFT) | \
IOMUX_PULL_NONE)
#define MKI2C_OUTPUT(p) (((p) & (~_PIN_MODE_MASK)) | GPIO_OUTPUT | GPIO_OUTPUT_ONE)
#define MKI2C_INPUT(p) (((p) & (~_PIN_MODE_MASK)) | GPIO_INPUT)
/****************************************************************************
* Private Types
@ -142,10 +131,10 @@ enum s32k1xx_trace_e
I2CEVENT_NONE = 0, /* No events have occurred with this status */
I2CEVENT_SENDADDR, /* Start/Master bit set and address sent, param = msgc */
I2CEVENT_SENDBYTE, /* Send byte, param = dcnt */
I2CEVENT_RCVBYTE, /* Read more dta, param = dcnt */
I2CEVENT_RCVBYTE, /* Read more data, param = dcnt */
I2CEVENT_NOSTART, /* BTF on last byte with no restart, param = msgc */
I2CEVENT_STARTRESTART, /* Last byte sent, re-starting, param = msgc */
I2CEVENT_STOP, /* Last byte sten, send stop, param = 0 */
I2CEVENT_STOP, /* Last byte sent, send stop, param = 0 */
I2CEVENT_ERROR /* Error occurred, param = 0 */
};
@ -160,7 +149,7 @@ struct s32k1xx_trace_s
clock_t time; /* First of event or first status */
};
/* I2C Device hardware configuration */
/* I2C device hardware configuration */
struct s32k1xx_lpi2c_config_s
{
@ -270,7 +259,7 @@ static inline void
static inline uint32_t
s32k1xx_lpi2c_getstatus(FAR struct s32k1xx_lpi2c_priv_s *priv);
static int s32k1xx_lpi2c_isr_process(struct s32k1xx_lpi2c_priv_s * priv);
static int s32k1xx_lpi2c_isr_process(struct s32k1xx_lpi2c_priv_s *priv);
#ifndef CONFIG_I2C_POLLED
static int s32k1xx_lpi2c_isr(int irq, void *context, FAR void *arg);
@ -308,9 +297,9 @@ static const char *g_trace_names[] =
static const struct i2c_ops_s s32k1xx_lpi2c_ops =
{
.transfer = s32k1xx_lpi2c_transfer
.transfer = s32k1xx_lpi2c_transfer,
#ifdef CONFIG_I2C_RESET
, .reset = s32k1xx_lpi2c_reset
.reset = s32k1xx_lpi2c_reset,
#endif
};
@ -325,11 +314,7 @@ static const struct s32k1xx_lpi2c_config_s s32k1xx_lpi2c0_config =
.filtsda = CONFIG_LPI2C0_FILTSDA,
.scl_pin = PIN_LPI2C0_SCL,
.sda_pin = PIN_LPI2C0_SDA,
#ifndef CONFIG_I2C_SLAVE
.mode = LPI2C_MASTER,
#else
.mode = LPI2C_SLAVE,
#endif
#ifndef CONFIG_I2C_POLLED
.irq = S32K1XX_IRQ_LPI2C0M,
#endif
@ -346,9 +331,9 @@ static struct s32k1xx_lpi2c_priv_s s32k1xx_lpi2c0_priv =
.ptr = NULL,
.dcnt = 0,
.flags = 0,
.status = 0
.status = 0,
};
#endif
#endif /* CONFIG_S32K1XX_LPI2C0 */
#ifdef CONFIG_S32K1XX_LPI2C1
static const struct s32k1xx_lpi2c_config_s s32k1xx_lpi2c1_config =
@ -359,11 +344,7 @@ static const struct s32k1xx_lpi2c_config_s s32k1xx_lpi2c1_config =
.filtsda = CONFIG_LPI2C1_FILTSDA,
.scl_pin = PIN_LPI2C1_SCL,
.sda_pin = PIN_LPI2C1_SDA,
#ifndef CONFIG_I2C_SLAVE
.mode = LPI2C_MASTER,
#else
.mode = LPI2C_SLAVE,
#endif
#ifndef CONFIG_I2C_POLLED
.irq = S32K1XX_IRQ_LPI2C1M,
#endif
@ -380,9 +361,9 @@ static struct s32k1xx_lpi2c_priv_s s32k1xx_lpi2c1_priv =
.ptr = NULL,
.dcnt = 0,
.flags = 0,
.status = 0
.status = 0,
};
#endif
#endif /* CONFIG_S32K1XX_LPI2C1 */
/****************************************************************************
* Private Functions
@ -592,12 +573,14 @@ static inline int
s32k1xx_lpi2c_putreg(priv, S32K1XX_LPI2C_MIER_OFFSET, 0);
}
#if 0
/* Enable Interrupts when slave mode */
else
{
s32k1xx_lpi2c_putreg(priv, S32K1XX_LPI2C_SIER_OFFSET, 0);
}
#endif
leave_critical_section(flags);
return ret;
@ -1199,7 +1182,7 @@ static int s32k1xx_lpi2c_isr_process(struct s32k1xx_lpi2c_priv_s *priv)
s32k1xx_lpi2c_tracenew(priv, status);
/* After an error we can get an SDF */
/* After an error we can get a STOP Detect Flag */
if (priv->intstate == INTSTATE_DONE && (status & LPI2C_MSR_SDF) != 0)
{
@ -1238,7 +1221,7 @@ static int s32k1xx_lpi2c_isr_process(struct s32k1xx_lpi2c_priv_s *priv)
{
s32k1xx_lpi2c_traceevent(priv, I2CEVENT_RCVBYTE, priv->dcnt);
/* No interrupts or context switches should occur in the following
/* No interrupts or contex switches should occur in the following
* sequence. Otherwise, additional bytes may be sent by the device.
*/
@ -1431,9 +1414,9 @@ static int s32k1xx_lpi2c_isr(int irq, void *context, FAR void *arg)
static int s32k1xx_lpi2c_init(FAR struct s32k1xx_lpi2c_priv_s *priv)
{
/* Power-up and configure GPIOs .
/* Power-up and configure pins.
*
* NOTE: Clocking to the LPSPI peripheral must be provided by
* NOTE: Clocking to the LPI2C peripheral must be provided by
* board-specific logic as part of the clock configuration logic.
*/
@ -1447,7 +1430,7 @@ static int s32k1xx_lpi2c_init(FAR struct s32k1xx_lpi2c_priv_s *priv)
s32k1xx_lpi2c_putreg(priv, S32K1XX_LPI2C_MCR_OFFSET, LPI2C_MCR_RST);
s32k1xx_lpi2c_putreg(priv, S32K1XX_LPI2C_MCR_OFFSET, 0);
/* Disable doze mode (Set DOZEN bit in 1 to disable) */
/* Disable doze mode (Set DOZEN bit to 1 to disable) */
s32k1xx_lpi2c_putreg(priv, S32K1XX_LPI2C_MCR_OFFSET, LPI2C_MCR_DOZEN);
@ -1585,7 +1568,7 @@ static int s32k1xx_lpi2c_transfer(FAR struct i2c_master_s *dev,
priv->status = 0;
/* Wait for an ISR, if there was a timeout, fetch latest status to get
/* Wait for ISR. If there was a timeout, fetch latest status to get
* the BUSY flag.
*/
@ -1820,7 +1803,7 @@ FAR struct i2c_master_s *s32k1xx_i2cbus_initialize(int port)
}
/* Initialize private data for the first time, increment reference count,
* power-up hardware and configure GPIOs.
* power-up hardware and configure pins.
*/
flags = enter_critical_section();

931
arch/arm/src/s32k1xx/s32k1xx_lpi2c_slave.c Normal file
View File

@ -0,0 +1,931 @@
/****************************************************************************
* arch/arm/src/s32k1xx/s32k1xx_lpi2c_slave.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <stdbool.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/irq.h>
#include <nuttx/clock.h>
#include <nuttx/i2c/i2c_slave.h>
#include <arch/irq.h>
#include "arm_arch.h"
#include "s32k1xx_pin.h"
#include "hardware/s32k1xx_pinmux.h"
#include "s32k1xx_lpi2c.h"
#include "s32k1xx_lpi2c_slave.h"
#include "s32k1xx_periphclocks.h"
#include <arch/board/board.h>
/* At least one I2C peripheral must be enabled, as well as the I2C slave */
#if defined(CONFIG_S32K1XX_LPI2C) && defined(CONFIG_I2C_SLAVE)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifdef CONFIG_ARCH_CHIP_S32K11X
#warning LPI2C slave logic does not support S32K11X (yet)
#endif
#ifdef CONFIG_I2C_POLLED
#warning LPI2C slave logic does not support polling (yet)
#endif
#ifdef CONFIG_I2C_TRACE
#warning LPI2C slave logic does not support I2C trace debugging (yet)
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/* I2C slave device hardware configuration */
struct s32k1xx_lpi2c_slave_config_s
{
uint32_t base; /* LPI2C base address */
bool slave_bus; /* Separate I2C slave bus? */
uint32_t scl_pin; /* GPIO configuration for SCL as SCL */
uint32_t sda_pin; /* GPIO configuration for SDA as SDA */
uint32_t irq; /* Event IRQ */
};
/* I2C slave device private data */
struct s32k1xx_lpi2c_slave_priv_s
{
const struct i2c_slaveops_s *ops; /* I2C slave operations */
const struct s32k1xx_lpi2c_slave_config_s *config; /* LPI2C slave configuration */
int slave_addr; /* I2C address of the slave */
int addr_nbits; /* 7- or 10-bit addressing */
uint8_t *read_buffer; /* Read buffer (master wants to write, slave will read data) */
int read_buflen; /* Read buffer size */
int read_bufindex; /* Read buffer index */
const uint8_t *write_buffer; /* Write buffer (master wants to read, slave will write data) */
int write_buflen; /* Write buffer size */
int write_bufindex; /* Write buffer index */
int (*callback)(FAR void *arg); /* Callback function when data has been received */
void *callback_arg; /* Argument of callback function */
int refs; /* Reference count */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static inline uint32_t s32k1xx_lpi2c_slave_getreg(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv, uint16_t offset);
static inline void s32k1xx_lpi2c_slave_putreg(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv, uint16_t offset,
uint32_t value);
static inline void s32k1xx_lpi2c_slave_modifyreg(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv, uint16_t offset,
uint32_t clearbits, uint32_t setbits);
static int s32k1xx_lpi2c_slave_isr_process(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv);
static int s32k1xx_lpi2c_slave_isr(int irq, void *context, FAR void *arg);
static int s32k1xx_lpi2c_slave_init(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv);
static int s32k1xx_lpi2c_slave_deinit(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv);
static int s32k1xx_lpi2c_setownaddress(FAR struct i2c_slave_s *dev, int addr,
int nbits);
static int s32k1xx_lpi2c_write(FAR struct i2c_slave_s *dev,
FAR const uint8_t *buffer, int buflen);
static int s32k1xx_lpi2c_read(FAR struct i2c_slave_s *dev,
FAR uint8_t *buffer, int buflen);
static int s32k1xx_lpi2c_registercallback(FAR struct i2c_slave_s *dev,
int (*callback)(FAR void *arg),
FAR void *arg);
/****************************************************************************
* Private Data
****************************************************************************/
/* I2C slave interface */
static const struct i2c_slaveops_s s32k1xx_lpi2c_slaveops =
{
.setownaddress = s32k1xx_lpi2c_setownaddress,
.write = s32k1xx_lpi2c_write,
.read = s32k1xx_lpi2c_read,
.registercallback = s32k1xx_lpi2c_registercallback,
};
/* I2C device structures */
#ifdef CONFIG_S32K1XX_LPI2C0
static const struct s32k1xx_lpi2c_slave_config_s s32k1xx_lpi2c0s_config =
{
.base = S32K1XX_LPI2C0_BASE,
#ifdef CONFIG_LPI2C0_SLAVE_BUS
.slave_bus = true,
.scl_pin = PIN_LPI2C0_SCLS,
.sda_pin = PIN_LPI2C0_SDAS,
#else
.slave_bus = false,
.scl_pin = PIN_LPI2C0_SCL,
.sda_pin = PIN_LPI2C0_SDA,
#endif
.irq = S32K1XX_IRQ_LPI2C0S,
};
static struct s32k1xx_lpi2c_slave_priv_s s32k1xx_lpi2c0s_priv =
{
.ops = &s32k1xx_lpi2c_slaveops,
.config = &s32k1xx_lpi2c0s_config,
.slave_addr = CONFIG_LPI2C0_SLAVE_ADDRESS,
.addr_nbits = 7,
.read_buffer = NULL,
.read_buflen = 0,
.read_bufindex = 0,
.write_buffer = NULL,
.write_buflen = 0,
.write_bufindex = 0,
.callback = NULL,
.callback_arg = NULL,
.refs = 0,
};
#endif /* CONFIG_S32K1XX_LPI2C0 */
#ifdef CONFIG_S32K1XX_LPI2C1
static const struct s32k1xx_lpi2c_slave_config_s s32k1xx_lpi2c1s_config =
{
.base = S32K1XX_LPI2C1_BASE,
#ifdef CONFIG_LPI2C1_SLAVE_BUS
.slave_bus = true,
.scl_pin = PIN_LPI2C1S_SCL,
.sda_pin = PIN_LPI2C1S_SDA,
#else
.slave_bus = false,
.scl_pin = PIN_LPI2C1_SCL,
.sda_pin = PIN_LPI2C1_SDA,
#endif
.irq = S32K1XX_IRQ_LPI2C1S,
};
static struct s32k1xx_lpi2c_slave_priv_s s32k1xx_lpi2c1s_priv =
{
.ops = &s32k1xx_lpi2c_slaveops,
.config = &s32k1xx_lpi2c1s_config,
.slave_addr = CONFIG_LPI2C1_SLAVE_ADDRESS,
.addr_nbits = 7,
.read_buffer = NULL,
.read_buflen = 0,
.read_bufindex = 0,
.write_buffer = NULL,
.write_buflen = 0,
.write_bufindex = 0,
.callback = NULL,
.callback_arg = NULL,
.refs = 0,
};
#endif /* CONFIG_S32K1XX_LPI2C1 */
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: s32k1xx_lpi2c_slave_getreg
*
* Description:
* Get a 32-bit register value by offset
*
* Input Parameters:
* priv - I2C slave device private data
* offset - Register offset with respect to the base address of the I2C
* peripheral
*
* Returned Value:
* The 32-bit value retrieved from the register
*
****************************************************************************/
static inline uint32_t s32k1xx_lpi2c_slave_getreg(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv, uint16_t offset)
{
return getreg32(priv->config->base + offset);
}
/****************************************************************************
* Name: s32k1xx_lpi2c_slave_putreg
*
* Description:
* Put a 32-bit register value by offset
*
* Input Parameters:
* priv - I2C slave device private data
* offset - Register offset with respect to the base address of the I2C
* peripheral
* value - The 32-bit value that should be put into the register
*
****************************************************************************/
static inline void s32k1xx_lpi2c_slave_putreg(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv, uint16_t offset,
uint32_t value)
{
putreg32(value, priv->config->base + offset);
}
/****************************************************************************
* Name: s32k1xx_lpi2c_slave_modifyreg
*
* Description:
* Modify a 32-bit register value by offset
*
* Input Parameters:
* priv - I2C slave device private data
* offset - Register offset with respect to the base address of the I2C
* peripheral
* clearbits - Bitmask with the bits that should be cleared (put to 0)
* setbits - Bitmask with the bits that should be set (put to 1)
*
****************************************************************************/
static inline void s32k1xx_lpi2c_slave_modifyreg(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv, uint16_t offset,
uint32_t clearbits, uint32_t setbits)
{
modifyreg32(priv->config->base + offset, clearbits, setbits);
}
/****************************************************************************
* Name: s32k1xx_lpi2c_slave_isr_process
*
* Description:
* Process LPI2C slave interrupts. Check for relevant flags and read or
* write data to buffers. After a block of data has been received a
* callback function (if any) may be invoked, which might install a new
* write buffer to transmit data when requested.
*
* Input Parameters:
* priv - I2C slave device private data
*
* Returned Value:
* OK when successful, or a negated errno when there is an error.
*
****************************************************************************/
static int s32k1xx_lpi2c_slave_isr_process(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv)
{
uint32_t status = s32k1xx_lpi2c_slave_getreg(priv,
S32K1XX_LPI2C_SSR_OFFSET);
/* Slave Address Valid Flag */
if (status & LPI2C_SSR_AVF)
{
/* A new transfer was initiated by a bus master. The transfer request
* was addressed to this particular device. It needs to be checked if
* the master wants to read or write.
*/
uint16_t address = (uint16_t) (s32k1xx_lpi2c_slave_getreg(priv,
S32K1XX_LPI2C_SASR_OFFSET) & LPI2C_SASR_RADDR_MASK);
if (address & I2CS_READBIT)
{
/* Master wants to read, so the slave needs to write/transmit.
* The Transmit Data Interrupt will only be enabled now, see
* erratum 10792. Also reset the buffer index back to zero to
* start sending again from the beginning.
*/
s32k1xx_lpi2c_slave_modifyreg(priv, S32K1XX_LPI2C_SIER_OFFSET, 0,
LPI2C_SIER_TDIE);
priv->write_bufindex = 0;
}
else
{
/* Master wants to write, so the slave needs to read. The Receive
* Data Interrupt remains enabled, so just reset the buffer index.
*/
priv->read_bufindex = 0;
}
}
/* Slave Transmits Data Flag (master wants to read) */
if (status & LPI2C_SSR_TDF)
{
/* Make sure that interrupts are enabled for this event */
if (s32k1xx_lpi2c_slave_getreg(priv,
S32K1XX_LPI2C_SIER_OFFSET) & LPI2C_SIER_TDIE)
{
if (priv->write_buflen > priv->write_bufindex)
{
/* Transmit data from buffer */
s32k1xx_lpi2c_slave_putreg(priv, S32K1XX_LPI2C_STDR_OFFSET,
(uint32_t) priv->write_buffer[priv->write_bufindex]);
priv->write_bufindex++;
}
else
{
/* Beyond the buffer length. Transmit dummy data... */
s32k1xx_lpi2c_slave_putreg(priv, S32K1XX_LPI2C_STDR_OFFSET, 0);
}
}
}
/* Slave Receives Data (master wants to write) */
if (status & LPI2C_SSR_RDF)
{
/* Make sure that interrupts are enabled for this event */
if (s32k1xx_lpi2c_slave_getreg(priv,
S32K1XX_LPI2C_SIER_OFFSET) & LPI2C_SIER_RDIE)
{
if (priv->read_buflen > priv->read_bufindex)
{
/* Read data into buffer */
priv->read_buffer[priv->read_bufindex] =
(uint8_t) s32k1xx_lpi2c_slave_getreg(priv,
S32K1XX_LPI2C_SRDR_OFFSET);
priv->read_bufindex++;
}
else
{
/* Dummy read, throw away the data */
s32k1xx_lpi2c_slave_getreg(priv, S32K1XX_LPI2C_SRDR_OFFSET);
}
}
}
/* Stop or Repeated Start (current transfer is over) */
if (s32k1xx_lpi2c_slave_getreg(priv, S32K1XX_LPI2C_SSR_OFFSET) & \
(LPI2C_SSR_SDF | LPI2C_SSR_RSF))
{
/* Clear Stop Detect / Repeated Start Flags */
s32k1xx_lpi2c_slave_putreg(priv, S32K1XX_LPI2C_SSR_OFFSET,
LPI2C_SSR_SDF | LPI2C_SSR_RSF);
/* Disable the Transmit Data Interrupt again, see erratum 10792 */
s32k1xx_lpi2c_slave_modifyreg(priv, S32K1XX_LPI2C_SIER_OFFSET,
LPI2C_SIER_TDIE, 0);
/* Execute the registered callback function if data was received */
if ((priv->read_bufindex > 0) && (priv->callback != NULL))
{
priv->callback(priv->callback_arg);
}
}
/* Slave Bit Error (abort current transfer) */
if (s32k1xx_lpi2c_slave_getreg(priv, S32K1XX_LPI2C_SSR_OFFSET) & \
LPI2C_SSR_BEF)
{
/* Clear Bit Error Flag */
s32k1xx_lpi2c_slave_putreg(priv, S32K1XX_LPI2C_SSR_OFFSET,
LPI2C_SSR_BEF);
/* Disable the Transmit Data Interrupt again, see erratum 10792 */
s32k1xx_lpi2c_slave_modifyreg(priv, S32K1XX_LPI2C_SIER_OFFSET,
LPI2C_SIER_TDIE, 0);
}
return OK;
}
/****************************************************************************
* Name: s32k1xx_lpi2c_slave_isr
*
* Description:
* Interrupt Service Routine for LPI2C slave devices. Retrieves the
* private data from the argument, further processing is done by
* s32k1xx_lpi2c_slave_isr_process().
*
* Input Parameters:
* irq - Number of the IRQ that generated the interrupt
* context - Interrupt register state save info (architecture-specific)
* arg - I2C slave device private data
*
* Returned Value:
* OK when successful, or a negated errno when there is an error.
*
****************************************************************************/
static int s32k1xx_lpi2c_slave_isr(int irq, void *context, FAR void *arg)
{
struct s32k1xx_lpi2c_slave_priv_s *priv =
(struct s32k1xx_lpi2c_slave_priv_s *)arg;
DEBUGASSERT(priv != NULL);
return s32k1xx_lpi2c_slave_isr_process(priv);
}
/****************************************************************************
* Name: s32k1xx_lpi2c_slave_init
*
* Description:
* Initialize the LPI2C slave device. Enable and configure the peripheral
* and enable the interrupts and attach handlers.
*
* Input Parameters:
* priv - I2C slave device private data
*
* Returned Value:
* OK when successful, or a negated errno when there is an error.
*
****************************************************************************/
static int s32k1xx_lpi2c_slave_init(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv)
{
int ret;
/* Reset LPI2C slave mode logic before configuring it */
s32k1xx_lpi2c_slave_putreg(priv, S32K1XX_LPI2C_SCR_OFFSET, LPI2C_SCR_RST);
s32k1xx_lpi2c_slave_putreg(priv, S32K1XX_LPI2C_SCR_OFFSET, 0);
/* Configure pins and power up peripheral.
*
* NOTE: Clocking to the LPI2C peripheral must be provided by
* board-specific logic as part of the clock configuration logic.
*/
ret = s32k1xx_pinconfig(priv->config->scl_pin);
if (ret != OK)
{
return ret;
}
ret = s32k1xx_pinconfig(priv->config->sda_pin);
if (ret != OK)
{
return ret;
}
/* Choose between a combined or separated LPI2C master and slave. When a
* separate slave bus is selected, the LPI2C slave will use different pins
* than the LPI2C master. These pins should be defined in board.h
*/
if (priv->config->slave_bus)
{
s32k1xx_lpi2c_slave_modifyreg(priv, S32K1XX_LPI2C_MCFGR1_OFFSET,
LPI2C_MCFGR1_PINCFG_MASK, LPI2C_MCFGR1_PINCFG4);
}
else
{
s32k1xx_lpi2c_slave_modifyreg(priv, S32K1XX_LPI2C_MCFGR1_OFFSET,
LPI2C_MCFGR1_PINCFG_MASK, LPI2C_MCFGR1_PINCFG0);
}
/* Configure slave address
*
* TO DO: Allow 10-bit addressing
*/
s32k1xx_lpi2c_slave_modifyreg(priv, S32K1XX_LPI2C_SAMR_OFFSET, 0,
LPI2C_SAMR_ADDR0(priv->slave_addr));
/* Enable clock stretching */
s32k1xx_lpi2c_slave_modifyreg(priv, S32K1XX_LPI2C_SCFGR1_OFFSET, 0,
LPI2C_SCFGR1_ADRSTALL | LPI2C_SCFGR1_RXSTALL | LPI2C_SCFGR1_TXSTALL);
/* Configure LPI2C slave interrupts */
s32k1xx_lpi2c_slave_modifyreg(priv, S32K1XX_LPI2C_SIER_OFFSET, 0,
LPI2C_SIER_RDIE | LPI2C_SIER_AVIE | LPI2C_SIER_RSIE | LPI2C_SIER_SDIE | \
LPI2C_SIER_BEIE);
/* Attach ISR and enable interrupt */
ret = irq_attach(priv->config->irq, s32k1xx_lpi2c_slave_isr, priv);
if (ret != OK)
{
return ret;
}
up_enable_irq(priv->config->irq);
/* Enable I2C slave */
s32k1xx_lpi2c_slave_modifyreg(priv, S32K1XX_LPI2C_SCR_OFFSET, 0,
LPI2C_SCR_SEN);
return OK;
}
/****************************************************************************
* Name: s32k1xx_lpi2c_slave_deinit
*
* Description:
* Deinitialize the LPI2C slave device. Disable and reset the peripheral
* and disable the interrupts and attached handlers.
*
* Input Parameters:
* priv - I2C slave device private data
*
* Returned Value:
* OK when successful, or a negated errno when there is an error.
*
****************************************************************************/
static int s32k1xx_lpi2c_slave_deinit(
FAR struct s32k1xx_lpi2c_slave_priv_s *priv)
{
int ret;
/* Disable LPI2C slave */
s32k1xx_lpi2c_slave_modifyreg(priv, S32K1XX_LPI2C_SCR_OFFSET,
LPI2C_SCR_SEN, 0);
/* Reset LPI2C slave */
s32k1xx_lpi2c_slave_putreg(priv, S32K1XX_LPI2C_SCR_OFFSET, LPI2C_SCR_RST);
s32k1xx_lpi2c_slave_putreg(priv, S32K1XX_LPI2C_SCR_OFFSET, 0);
/* Disable and detach interrupts */
up_disable_irq(priv->config->irq);
ret = irq_detach(priv->config->irq);
if (ret != OK)
{
return ret;
}
/* NOTE that clocking is left enabled */
return OK;
}
/****************************************************************************
* Device Driver Operations
****************************************************************************/
/****************************************************************************
* Name: s32k1xx_lpi2c_setownaddress
*
* Description:
* Set our own I2C address.
*
* One may register a callback to be notified about reception. During the
* slave mode reception, the methods READ and WRITE must be used to
* to handle reads and writes from a master.
*
* Input Parameters:
* dev - I2C slave device-specific state data
* address - Our own slave address
* nbits - The number of address bits provided (7 or 10)
*
* Returned Value:
* OK when successful, or a negated errno when there is an error.
*
****************************************************************************/
static int s32k1xx_lpi2c_setownaddress(FAR struct i2c_slave_s *dev, int addr,
int nbits)
{
FAR struct s32k1xx_lpi2c_slave_priv_s *priv;
irqstate_t flags;
DEBUGASSERT(dev);
priv = (FAR struct s32k1xx_lpi2c_slave_priv_s *)dev;
flags = enter_critical_section();
/* Deinit slave before we change its configuration */
int ret = s32k1xx_lpi2c_slave_deinit(priv);
if (ret != OK)
{
leave_critical_section(flags);
return ret;
}
/* Modify configuration */
switch (nbits)
{
case 7:
{
priv->slave_addr = (addr & 0x7f);
priv->addr_nbits = 7;
}
break;
case 10:
{
priv->slave_addr = (addr & 0x03ff);
priv->addr_nbits = 10;
}
break;
default:
{
leave_critical_section(flags);
return ERROR;
}
break;
}
/* Reinitialize slave with the changed config */
s32k1xx_lpi2c_slave_init(priv);
leave_critical_section(flags);
return OK;
}
/****************************************************************************
* Name: s32k1xx_lpi2c_write
*
* Description:
* Send a block of data on I2C when a bus master wants to read data from
* this particular device.
*
* Input Parameters:
* dev - I2C slave device-specific state data
* buffer - A pointer to the read-only buffer of data to be written to the
* device
* buflen - The number of bytes to send from the buffer
*
* Returned Value:
* OK when successful, or a negated errno when there is an error.
*
****************************************************************************/
static int s32k1xx_lpi2c_write(FAR struct i2c_slave_s *dev,
FAR const uint8_t *buffer, int buflen)
{
FAR struct s32k1xx_lpi2c_slave_priv_s *priv;
irqstate_t flags;
DEBUGASSERT(dev);
priv = (FAR struct s32k1xx_lpi2c_slave_priv_s *)dev;
flags = enter_critical_section();
/* Update the registered buffer and length */
priv->write_buffer = buffer;
priv->write_buflen = buflen;
leave_critical_section(flags);
return OK;
}
/****************************************************************************
* Name: s32k1xx_lpi2c_read
*
* Description:
* Receive a block of data from I2C when a bus master writes data addressed
* to this particular device.
*
* Input Parameters:
* dev - I2C slave device-specific state data
* buffer - A pointer to a buffer of data to receive the data from the
* device
* buflen - The maximum size of the buffer
*
* Returned Value:
* OK when successful, or a negated errno when there is an error.
*
****************************************************************************/
static int s32k1xx_lpi2c_read(FAR struct i2c_slave_s *dev,
FAR uint8_t *buffer, int buflen)
{
FAR struct s32k1xx_lpi2c_slave_priv_s *priv;
irqstate_t flags;
DEBUGASSERT(dev);
priv = (FAR struct s32k1xx_lpi2c_slave_priv_s *)dev;
flags = enter_critical_section();
/* Update the registered buffer and length */
priv->read_buffer = buffer;
priv->read_buflen = buflen;
leave_critical_section(flags);
return OK;
}
/****************************************************************************
* Name: s32k1xx_lpi2c_registercallback
*
* Description:
* Register a callback function that will be invoked when something is
* received on I2C.
*
* Input Parameters:
* dev - I2C slave device-specific state data
* callback - The function to be called when something has been received.
* arg - User provided argument to be used with the callback
*
* Returned Value:
* OK when successful, or a negated errno when there is an error.
*
****************************************************************************/
static int s32k1xx_lpi2c_registercallback(FAR struct i2c_slave_s *dev,
int (*callback)(FAR void *arg), FAR void *arg)
{
FAR struct s32k1xx_lpi2c_slave_priv_s *priv;
irqstate_t flags;
DEBUGASSERT(dev);
priv = (FAR struct s32k1xx_lpi2c_slave_priv_s *)dev;
flags = enter_critical_section();
/* Update the registered callback and argument */
priv->callback = callback;
priv->callback_arg = arg;
leave_critical_section(flags);
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: s32k1xx_i2cbus_slave_initialize
*
* Description:
* Initialize the I2C slave device and increase the reference counter.
* If the device has already been initialized only the reference counter
* will be increased.
*
* Input Parameters:
* port - Port number (for hardware that has multiple I2C interfaces).
*
* Returned Value:
* A valid I2C device structure reference on success; a NULL on failure.
*
****************************************************************************/
FAR struct i2c_slave_s *s32k1xx_i2cbus_slave_initialize(int port)
{
struct s32k1xx_lpi2c_slave_priv_s *priv;
irqstate_t flags;
/* Get I2C private structure */
switch (port)
{
#ifdef CONFIG_S32K1XX_LPI2C0
case 0:
priv = (struct s32k1xx_lpi2c_slave_priv_s *)&s32k1xx_lpi2c0s_priv;
break;
#endif
#ifdef CONFIG_S32K1XX_LPI2C1
case 1:
priv = (struct s32k1xx_lpi2c_slave_priv_s *)&s32k1xx_lpi2c1s_priv;
break;
#endif
default:
return NULL;
}
flags = enter_critical_section();
if ((volatile int) priv->refs == 0)
{
/* Initialize private data for the first time, increment reference
* count, power-up hardware and configure pins.
*/
s32k1xx_lpi2c_slave_init(priv);
}
priv->refs++;
leave_critical_section(flags);
return (struct i2c_slave_s *)priv;
}
/****************************************************************************
* Name: s32k1xx_i2cbus_slave_uninitialize
*
* Description:
* Decrease the reference counter of the I2C slave device. When there are
* no more references left the I2C slave device is unitialized.
*
* Input Parameters:
* dev - Device structure as returned by s32k1xx_i2cbus_slave_initialize().
*
* Returned Value:
* OK on success, ERROR when there is an internal reference count mismatch
* or dev points to an invalid hardware device.
*
****************************************************************************/
int s32k1xx_i2cbus_slave_uninitialize(FAR struct i2c_slave_s *dev)
{
FAR struct s32k1xx_lpi2c_slave_priv_s *priv =
(struct s32k1xx_lpi2c_slave_priv_s *)dev;
irqstate_t flags;
DEBUGASSERT(dev);
/* Check reference count for underflow, then decrement */
flags = enter_critical_section();
if (priv->refs == 0)
{
leave_critical_section(flags);
return ERROR;
}
priv->refs--;
if (priv->refs > 0)
{
leave_critical_section(flags);
return OK;
}
leave_critical_section(flags);
/* Disable power and other HW resources (pins) */
s32k1xx_lpi2c_slave_deinit(priv);
return OK;
}
#endif /* CONFIG_S32K1XX_LPI2C && CONFIG_I2C_SLAVE */

90
arch/arm/src/s32k1xx/s32k1xx_lpi2c_slave.h Normal file
View File

@ -0,0 +1,90 @@
/****************************************************************************
* arch/arm/src/s32k1xx/s32k1xx_lpi2c_slave.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __ARCH_ARM_SRC_S32K1XX_S32K1XX_LPI2C_SLAVE_H
#define __ARCH_ARM_SRC_S32K1XX_S32K1XX_LPI2C_SLAVE_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/i2c/i2c_slave.h>
/****************************************************************************
* Public Data
****************************************************************************/
#ifndef __ASSEMBLY__
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: s32k1xx_i2cbus_slave_initialize
*
* Description:
* Initialize the I2C slave device and increase the reference counter.
* If the device has already been initialized only the reference counter
* will be increased.
*
* Input Parameters:
* port - Port number (for hardware that has multiple I2C interfaces).
*
* Returned Value:
* A valid I2C device structure reference on success; a NULL on failure.
*
****************************************************************************/
FAR struct i2c_slave_s *s32k1xx_i2cbus_slave_initialize(int port);
/****************************************************************************
* Name: s32k1xx_i2cbus_slave_uninitialize
*
* Description:
* Decrease the reference counter of the I2C slave device. When there are
* no more references left the I2C slave device is unitialized.
*
* Input Parameters:
* dev - Device structure as returned by s32k1xx_i2cbus_slave_initialize().
*
* Returned Value:
* OK on success, ERROR when there is an internal reference count mismatch
* or dev points to an invalid hardware device.
*
****************************************************************************/
int s32k1xx_i2cbus_slave_uninitialize(FAR struct i2c_slave_s *dev);
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_S32K1XX_S32K1XX_LPI2C_SLAVE_H */