sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Rename Olimex LPC1766-STK files to conform with current naming standards

Browse Source
This commit is contained in:
Gregory Nutt 2014-02-09 15:57:02 -06:00
parent 39b98dbf02
commit bd16412749
10 changed files with 0 additions and 2141 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

266
configs/olimex-lpc1766stk/src/lpc1766stk_internal.h
View File

@ -1,266 +0,0 @@
/************************************************************************************
* configs/olimex-lpc1766stk/src/lpc1766stk_internal.h
* arch/arm/src/board/lpc1766stk_internal.n
*
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
#define _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
/************************************************************************************
* Definitions
************************************************************************************/
/* LPC1766-STK GPIO Pin Definitions *************************************************/
/* Board GPIO Usage:
*
* GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P0[0]/RD1/TXD3/SDA1 46 RD1
* P0[1]/TD1/RXD3/SCL1 47 TD1
* P0[2]/TXD0/AD0[7] 98 TXD0
* P0[3]/RXD0/AD0[6] 99 RXD0
* P0[4]/I2SRX_CLK/RD2/CAP2[0] 81 LED2/ACC IRQ
* P0[5]/I2SRX_WS/TD2/CAP2[1] 80 CENTER
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] 79 SSEL1
* P0[7]/I2STX_CLK/SCK1/MAT2[1] 78 SCK1
* P0[8]/I2STX_WS/MISO1/MAT2[2] 77 MISO1
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] 76 MOSI1
* P0[10]/TXD2/SDA2/MAT3[0] 48 SDA2
* P0[11]/RXD2/SCL2/MAT3[1] 49 SCL2
* P0[15]/TXD1/SCK0/SCK 62 TXD1
* P0[16]/RXD1/SSEL0/SSEL 63 RXD1
* P0[17]/CTS1/MISO0/MISO 61 CTS1
* P0[18]/DCD1/MOSI0/MOSI 60 DCD1
* P0[19]/DSR1/SDA1 59 DSR1
* P0[20]/DTR1/SCL1 58 DTR1
* P0[21]/RI1/RD1 57 MMC PWR
* P0[22]/RTS1/TD1 56 RTS1
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] 9 BUT1
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] 8 TEMP
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 7 MIC IN
* P0[26]/AD0[3]/AOUT/RXD3 6 AOUT
* P0[27]/SDA0/USB_SDA 25 USB_SDA
* P0[28]/SCL0/USB_SCL 24 USB_SCL
* P0[29]/USB_D+ 29 USB_D+
* P0[30]/USB_D- 30 USB_D-
* P1[0]/ENET_TXD0 95 E_TXD0
* P1[1]/ENET_TXD1 94 E_TXD1
* P1[4]/ENET_TX_EN 93 E_TX_EN
* P1[8]/ENET_CRS 92 E_CRS
* P1[9]/ENET_RXD0 91 E_RXD0
* P1[10]/ENET_RXD1 90 E_RXD1
* P1[14]/ENET_RX_ER 89 E_RX_ER
* P1[15]/ENET_REF_CLK 88 E_REF_CLK
* P1[16]/ENET_MDC 87 E_MDC
* P1[17]/ENET_MDIO 86 E_MDIO
* P1[18]/USB_UP_LED/PWM1[1]/CAP1[0] 32 USB_UP_LED
* P1[19]/MC0A/#USB_PPWR/CAP1[1] 33 #USB_PPWR
* P1[20]/MCFB0/PWM1[2]/SCK0 34 SCK0
* P1[21]/MCABORT/PWM1[3]/SSEL0 35 SSEL0
* P1[22]/MC0B/USB_PWRD/MAT1[0] 36 USBH_PWRD
* P1[23]/MCFB1/PWM1[4]/MISO0 37 MISO0
* P1[24]/MCFB2/PWM1[5]/MOSI0 38 MOSI0
* P1[25]/MC1A/MAT1[1] 39 LED1
* P1[26]/MC1B/PWM1[6]/CAP0[0] 40 CS_UEXT
* P1[27]/CLKOUT/#USB_OVRCR/CAP0[1] 43 #USB_OVRCR
* P1[28]/MC2A/PCAP1[0]/MAT0[0] 44 P1.28
* P1[29]/MC2B/PCAP1[1]/MAT0[1] 45 P1.29
* P1[30]/VBUS/AD0[4] 21 VBUS
* P1[31]/SCK1/AD0[5] 20 AIN5
* P2[0]/PWM1[1]/TXD1 75 UP
* P2[1]/PWM1[2]/RXD1 74 DOWN
* P2[2]/PWM1[3]/CTS1/TRACEDATA[3] 73 TRACE_D3
* P2[3]/PWM1[4]/DCD1/TRACEDATA[2] 70 TRACE_D2
* P2[4]/PWM1[5]/DSR1/TRACEDATA[1] 69 TRACE_D1
* P2[5]/PWM1[6]/DTR1/TRACEDATA[0] 68 TRACE_D0
* P2[6]/PCAP1[0]/RI1/TRACECLK 67 TRACE_CLK
* P2[7]/RD2/RTS1 66 LEFT
* P2[8]/TD2/TXD2 65 RIGHT
* P2[9]/USB_CONNECT/RXD2 64 USBD_CONNECT
* P2[10]/#EINT0/NMI 53 ISP_E4
* P2[11]/#EINT1/I2STX_CLK 52 #EINT1
* P2[12]/#EINT2/I2STX_WS 51 WAKE-UP
* P2[13]/#EINT3/I2STX_SDA 50 BUT2
* P3[25]/MAT0[0]/PWM1[2] 27 LCD_RST
* P3[26]/STCLK/MAT0[1]/PWM1[3] 26 LCD_BL
*/
/* LEDs GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P1[25]/MC1A/MAT1[1] 39 LED1
* P0[4]/I2SRX_CLK/RD2/CAP2[0] 81 LED2/ACC IRQ
*
* LEDs are connected to +3.3V through a diode on one side and must be pulled
* low (through a resistor) on the LPC17xx side in order to illuminuate them.
*/
#define LPC1766STK_LED1 (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN25)
#define LPC1766STK_LED2 (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN4)
/* Buttons GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] 9 BUT1
* P2[13]/#EINT3/I2STX_SDA 50 BUT2
* P2[12]/#EINT2/I2STX_WS 51 WAKE-UP
*
* NOTES:
* 1. Pull-ups are not required because the pins are already pulled-up by
* through resistors on the board.
* 2. All buttons are capable of supporting interrupts if board_button_irq() is
* called to attach an interrupt handler. Interrupts are configured to
* occur on both edges.
*/
#define LPC1766STK_BUT1 (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT0 | GPIO_PIN23)
#define LPC1766STK_BUT2 (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN13)
#define LPC1766STK_WAKEUP (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN12)
/* Button IRQ numbers */
#define LPC1766STK_BUT1_IRQ LPC17_IRQ_P0p23
#define LPC1766STK_BUT2_IRQ LPC17_IRQ_P2p13
#define LPC1766STK_WAKEUP_IRQ LPC17_IRQ_P2p12
/* Joystick GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P0[5]/I2SRX_WS/TD2/CAP2[1] 80 CENTER
* P2[0]/PWM1[1]/TXD1 75 UP
* P2[1]/PWM1[2]/RXD1 74 DOWN
* P2[7]/RD2/RTS1 66 LEFT
* P2[8]/TD2/TXD2 65 RIGHT
*
* NOTES:
* 1. Pull-ups are not required because the pins are already pulled-up by
* through resistors on the board.
* 2. All buttons are capable of supporting interrupts if board_button_irq() is
* called to attach an interrupt handler. Interrupts are configured to
* occur on both edges.
*/
#define LPC1766STK_CENTER (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT0 | GPIO_PIN5)
#define LPC1766STK_UP (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN0)
#define LPC1766STK_DOWN (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN1)
#define LPC1766STK_LEFT (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN7)
#define LPC1766STK_RIGHT (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN8)
/* Joystick IRQ numbers */
#define LPC1766STK_CENTER_IRQ LPC17_IRQ_P0p5
#define LPC1766STK_UP_IRQ LPC17_IRQ_P2p0
#define LPC1766STK_DOWN_IRQ LPC17_IRQ_P2p1
#define LPC1766STK_LEFT_IRQ LPC17_IRQ_P2p7
#define LPC1766STK_RIGHT_IRQ LPC17_IRQ_P2p8
/* Nokia LCD GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P1[21]/MCABORT/PWM1[3]/SSEL0 35 SSEL0
* P1[20]/MCFB0/PWM1[2]/SCK0 34 SCK0
* P1[23]/MCFB1/PWM1[4]/MISO0 37 MISO0
* P1[24]/MCFB2/PWM1[5]/MOSI0 38 MOSI0
* P3[25]/MAT0[0]/PWM1[2] 27 LCD_RST
* P3[26]/STCLK/MAT0[1]/PWM1[3] 26 LCD_BL (PWM1)
*/
#define LPC1766STK_LCD_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN21)
#define LPC1766STK_LCD_RST (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT3 | GPIO_PIN25)
#define LPC1766STK_LCD_BL GPIO_PWM1p3_3
#define GPIO_PWM1p3 GPIO_PWM1p3_3
/* SD/MMC GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P0[6]/I2SRX_SDA/SSEL1/MAT2[0] 79 SSEL1 (active low)
* P0[7]/I2STX_CLK/SCK1/MAT2[1] 78 SCK1
* P0[8]/I2STX_WS/MISO1/MAT2[2] 77 MISO1
* P0[9]/I2STX_SDA/MOSI1/MAT2[3] 76 MOSI1
* P0[21]/RI1/RD1 57 MMC PWR (active low)
*/
#define LPC1766STK_MMC_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN6)
#define LPC1766STK_MMC_PWR (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN21)
/* AD GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P0[24]/AD0[1]/I2SRX_WS/CAP3[1] 8 TEMP
* P0[25]/AD0[2]/I2SRX_SDA/TXD3 7 MIC IN
*/
#define LPC1766STK_TEMP GPIO_AD0p1
#define LPC1766STK_MIC_IN GPIO_AD0p2
/* UEXT GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P1[26]/MC1B/PWM1[6]/CAP0[0] 40 CS_UEXT
*/
#define LPC1766STK_CS_UEXT (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT1 | GPIO_PIN26)
/* ISP? GPIO PIN SIGNAL NAME
* -------------------------------- ---- --------------
* P2[10]/#EINT0/NMI 53 ISP_E4
*/
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public data
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lpc1766stk_sspinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the Olimex LPC1766-STK board.
*
************************************************************************************/
void weak_function lpc1766stk_sspinitialize(void);
#endif /* __ASSEMBLY__ */
#endif /* _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H */

93
configs/olimex-lpc1766stk/src/up_boot.c
View File

@ -1,93 +0,0 @@
/************************************************************************************
* configs/olimex-lpc1766stk/src/up_boot.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2010, 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "lpc17_ssp.h"
#include "lpc1766stk_internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lpc17_boardinitialize
*
* Description:
* All LPC17xx architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void lpc17_boardinitialize(void)
{
/* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
* function lpc1766stk_sspinitialize() has been brought into the link.
*/
#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
if (lpc1766stk_sspinitialize)
{
lpc1766stk_sspinitialize();
}
#endif
/* Configure on-board LEDs if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS
board_led_initialize();
#endif
}

228
configs/olimex-lpc1766stk/src/up_buttons.c
View File

@ -1,228 +0,0 @@
/****************************************************************************
* configs/olimex-lpc1766stk/src/board_buttons.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <nuttx/arch.h>
#include <nuttx/irq.h>
#include <arch/board/board.h>
#include "lpc17_gpio.h"
#include "lpc1766stk_internal.h"
#ifdef CONFIG_ARCH_BUTTONS
/****************************************************************************
* Definitions
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/* Pin configuration for each STM3210E-EVAL button. This array is indexed by
* the BUTTON_* and JOYSTICK_* definitions in board.h
*/
static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
{
LPC1766STK_BUT1, LPC1766STK_BUT2, LPC1766STK_WAKEUP, LPC1766STK_CENTER,
LPC1766STK_UP, LPC1766STK_DOWN, LPC1766STK_LEFT, LPC1766STK_RIGHT
};
/* This array defines all of the interupt handlers current attached to
* button events.
*/
#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ)
static xcpt_t g_buttonisr[BOARD_NUM_BUTTONS];
/* This array provides the mapping from button ID numbers to button IRQ
* numbers.
*/
static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
{
LPC1766STK_BUT1_IRQ, LPC1766STK_BUT2_IRQ, LPC1766STK_WAKEUP_IRQ,
LPC1766STK_CENTER_IRQ, LPC1766STK_UP_IRQ, LPC1766STK_DOWN_IRQ,
LPC1766STK_LEFT_IRQ, LPC1766STK_RIGHT_IRQ
};
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_button_initialize
*
* Description:
* board_button_initialize() must be called to initialize button resources. After
* that, board_buttons() may be called to collect the current state of all
* buttons or board_button_irq() may be called to register button interrupt
* handlers.
*
****************************************************************************/
void board_button_initialize(void)
{
int i;
/* Configure the GPIO pins as interrupting inputs. */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
{
lpc17_configgpio(g_buttoncfg[i]);
}
}
/****************************************************************************
* Name: board_buttons
*
* Description:
* board_button_initialize() must be called to initialize button resources. After
* that, board_buttons() may be called to collect the current state of all
* buttons.
*
* board_buttons() may be called at any time to harvest the state of every
* button. The state of the buttons is returned as a bitset with one
* bit corresponding to each button: If the bit is set, then the button
* is pressed. See the BOARD_BUTTON_*_BIT and BOARD_JOYSTICK_*_BIT
* definitions in board.h for the meaning of each bit.
*
****************************************************************************/
uint8_t board_buttons(void)
{
uint8_t ret = 0;
int i;
/* Check that state of each key */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
{
/* A LOW value means that the key is pressed. */
bool released = lpc17_gpioread(g_buttoncfg[i]);
/* Accumulate the set of depressed (not released) keys */
if (!released)
{
ret |= (1 << i);
}
}
return ret;
}
/****************************************************************************
* Button support.
*
* Description:
* board_button_initialize() must be called to initialize button resources. After
* that, board_button_irq() may be called to register button interrupt handlers.
*
* board_button_irq() may be called to register an interrupt handler that will
* be called when a button is depressed or released. The ID value is a
* button enumeration value that uniquely identifies a button resource. See the
* BOARD_BUTTON_* and BOARD_JOYSTICK_* definitions in board.h for the meaning
* of enumeration values. The previous interrupt handler address is returned
* (so that it may restored, if so desired).
*
* Note that board_button_irq() also enables button interrupts. Button
* interrupts will remain enabled after the interrupt handler is attached.
* Interrupts may be disabled (and detached) by calling board_button_irq with
* irqhandler equal to NULL.
*
****************************************************************************/
#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ)
xcpt_t board_button_irq(int id, xcpt_t irqhandler)
{
xcpt_t oldhandler = NULL;
irqstate_t flags;
int irq;
/* Verify that the button ID is within range */
if ((unsigned)id < BOARD_NUM_BUTTONS)
{
/* Return the current button handler and set the new interrupt handler */
oldhandler = g_buttonisr[id];
g_buttonisr[id] = irqhandler;
/* Disable interrupts until we are done */
flags = irqsave();
/* Configure the interrupt. Either attach and enable the new
* interrupt or disable and detach the old interrupt handler.
*/
irq = g_buttonirq[id];
if (irqhandler)
{
/* Attach then enable the new interrupt handler */
(void)irq_attach(irq, irqhandler);
up_enable_irq(irq);
}
else
{
/* Disable then detach the old interrupt handler */
up_disable_irq(irq);
(void)irq_detach(irq);
}
irqrestore(flags);
}
return oldhandler;
}
#endif
#endif /* CONFIG_ARCH_BUTTONS */

145
configs/olimex-lpc1766stk/src/up_can.c
View File

@ -1,145 +0,0 @@
/************************************************************************************
* configs/solimex-lpc1766stk/src/up_can.c
* arch/arm/src/board/up_can.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/can.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "lpc17_can.h"
#include "lpc1766stk_internal.h"
#if defined(CONFIG_CAN) && (defined(CONFIG_LPC17_CAN1) || defined(CONFIG_LPC17_CAN2))
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
#if defined(CONFIG_LPC17_CAN1) && defined(CONFIG_LPC17_CAN2)
# warning "Both CAN1 and CAN2 are enabled. Assuming only CAN1."
# undef CONFIG_LPC17_CAN2
#endif
#ifdef CONFIG_LPC17_CAN2
# warning "CAN2 is not connected on the LPC1766-STK"
#endif
#ifdef CONFIG_LPC17_CAN1
# define CAN_PORT 1
#else
# define CAN_PORT 2
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define candbg dbg
# define canvdbg vdbg
# define canlldbg lldbg
# define canllvdbg llvdbg
#else
# define candbg(x...)
# define canvdbg(x...)
# define canlldbg(x...)
# define canllvdbg(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: can_devinit
*
* Description:
* All LPC17 architectures must provide the following interface to work with
* examples/can.
*
************************************************************************************/
int can_devinit(void)
{
static bool initialized = false;
struct can_dev_s *can;
int ret;
/* Check if we have already initialized */
if (!initialized)
{
/* Call lpc17_caninitialize() to get an instance of the CAN interface */
can = lpc17_caninitialize(CAN_PORT);
if (can == NULL)
{
candbg("ERROR: Failed to get CAN interface\n");
return -ENODEV;
}
/* Register the CAN driver at "/dev/can0" */
ret = can_register("/dev/can0", can);
if (ret < 0)
{
candbg("ERROR: can_register failed: %d\n", ret);
return ret;
}
/* Now we are initialized */
initialized = true;
}
return OK;
}
#endif /* CONFIG_CAN && (CONFIG_LPC17_CAN1 || CONFIG_LPC17_CAN2) */

71
configs/olimex-lpc1766stk/src/up_hidkbd.c
View File

@ -1,71 +0,0 @@
/****************************************************************************
* configs/olimex-lpc1766stk/src/up_hidkbd.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/usb/usbhost.h>
#include "lpc17_usbhost.h"
#if defined(CONFIG_LPC17_USBHOST) && defined(CONFIG_USBHOST) && \
defined(CONFIG_EXAMPLES_HIDKBD)
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: arch_usbhost_initialize
*
* Description:
* The apps/example/hidkbd test requires that platform-specific code
* provide a wrapper called arch_usbhost_initialize() that will perform
* the actual USB host initialization.
*
****************************************************************************/
struct usbhost_connection_s *arch_usbhost_initialize(void)
{
return lpc17_usbhost_initialize(0);
}
#endif /* CONFIG_LPC17_USBHOST && CONFIG_USBHOST && CONFIG_EXAMPLES_HIDKBD */

265
configs/olimex-lpc1766stk/src/up_lcd.c
View File

@ -1,265 +0,0 @@
/****************************************************************************
* config/olimex-lpc1766stk/src/up_lcd.c
* arch/arm/src/board/up_lcd.c
*
* Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSPBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/arch.h>
#include <nuttx/spi/spi.h>
#include <nuttx/lcd/lcd.h>
#include <nuttx/lcd/nokia6100.h>
#include "up_arch.h"
#include "chip/lpc17_syscon.h"
#include "chip/lpc17_pwm.h"
#include "lpc17_gpio.h"
#include "lpc1766stk_internal.h"
#if defined(CONFIG_NX_LCDDRIVER) && defined(CONFIG_LCD_NOKIA6100) && defined(CONFIG_LPC17_SSP0)
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Check power setting */
#if !defined(CONFIG_LCD_MAXPOWER) || CONFIG_LCD_MAXPOWER != 127
# error "CONFIG_LCD_MAXPOWER must be 127"
#endif
/* Backlight OFF PWM setting */
#define NOKIA_BACKLIGHT_OFF 0x40
/* Define the CONFIG_LCD_NOKIADBG to enable detailed debug output (stuff you
* would never want to see unless you are debugging this file).
*
* Verbose debug must also be enabled
*/
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_VERBOSE
# undef CONFIG_DEBUG_GRAPHICS
#endif
#ifndef CONFIG_DEBUG_VERBOSE
# undef CONFIG_LCD_NOKIADBG
#endif
#ifdef CONFIG_LCD_NOKIADBG
# define lcddbg(format, arg...) vdbg(format, ##arg)
# define lcd_dumpgpio(m) lpc17_dumpgpio(LPC1766STK_LCD_RST, m)
#else
# define lcddbg(x...)
# define lcd_dumpgpio(m)
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nokia_blinitialize
*
* Description:
* Initialize PWM1 to manage the LCD backlight.
*
****************************************************************************/
void nokia_blinitialize(void)
{
uint32_t regval;
/* Enable clocking of PWM1 */
regval = getreg32(LPC17_SYSCON_PCONP);
regval |= SYSCON_PCONP_PCPWM1;
putreg32(regval, LPC17_SYSCON_PCONP);
/* Disable and reset PWM1 */
regval = getreg32(LPC17_PWM1_TCR);
regval &= ~(PWM_TCR_PWMEN|PWM_TCR_CNTREN);
regval |= PWM_TCR_CNTRRST;
putreg32(regval, LPC17_PWM1_TCR);
/* Put PWM1 in timer mode */
regval = getreg32(LPC17_PWM1_CTCR);
regval &= ~PWM_CTCR_MODE_MASK;
regval |= PWM_CTCR_MODE_TIMER;
putreg32(regval, LPC17_PWM1_CTCR);
/* Reset on MR0 */
putreg32(PWM_MCR_MR0R, LPC17_PWM1_MCR);
/* Single edge controlled mod for PWM3 and enable output */
regval = getreg32(LPC17_PWM1_PCR);
regval &= ~PWM_PCR_SEL3;
regval |= PWM_PCR_ENA3;
putreg32(regval, LPC17_PWM1_PCR);
/* Clear prescaler */
putreg32(0, LPC17_PWM1_PR);
/* Set 8-bit resolution */
putreg32(0xff, LPC17_PWM1_MCR);
/* Enable PWM match 1 latch */
regval = getreg32(LPC17_PWM1_LER);
regval |= PWM_LER_M0EN;
putreg32(regval, LPC17_PWM1_LER);
/* Clear match register 3 */
putreg32(0, LPC17_PWM1_MR3);
/* Enable PWM1 */
regval |= PWM_LER_M3EN;
putreg32(regval, LPC17_PWM1_LER);
regval = getreg32(LPC17_PWM1_TCR);
regval &= ~(PWM_TCR_CNTRRST);
regval |= (PWM_TCR_PWMEN|PWM_TCR_CNTREN);
putreg32(regval, LPC17_PWM1_TCR);
nokia_backlight(0);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_nxdrvinit
*
* Description:
* Called NX initialization logic to configure the LCD.
*
****************************************************************************/
FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno)
{
FAR struct spi_dev_s *spi;
FAR struct lcd_dev_s *dev;
/* Configure the LCD GPIOs */
lcd_dumpgpio("up_nxdrvinit: On entry");
lpc17_configgpio(LPC1766STK_LCD_RST);
lpc17_configgpio(LPC1766STK_LCD_BL);
lcd_dumpgpio("up_nxdrvinit: After GPIO setup");
/* Reset the LCD */
lpc17_gpiowrite(LPC1766STK_LCD_RST, false);
up_udelay(10);
lpc17_gpiowrite(LPC1766STK_LCD_RST, true);
up_mdelay(5);
/* Configure PWM1 to support the backlight */
nokia_blinitialize();
/* Get the SSP0 port (configure as a Freescale SPI port) */
spi = lpc17_sspinitialize(0);
if (!spi)
{
glldbg("Failed to initialize SSP port 0\n");
}
else
{
/* Bind the SSP port to the LCD */
dev = nokia_lcdinitialize(spi, devno);
if (!dev)
{
glldbg("Failed to bind SSP port 0 to LCD %d: %d\n", devno);
}
else
{
gllvdbg("Bound SSP port 0 to LCD %d\n", devno);
/* And turn the LCD on (CONFIG_LCD_MAXPOWER should be 1) */
(void)dev->setpower(dev, CONFIG_LCD_MAXPOWER);
return dev;
}
}
return NULL;
}
/****************************************************************************
* Name: nokia_backlight
*
* Description:
* The Nokia 6100 backlight is controlled by logic outside of the LCD
* assembly. This function must be provided by board specific logic to
* manage the backlight. This function will receive a power value (0:
* full off - CONFIG_LCD_MAXPOWER: full on) and should set the backlight
* accordingly.
*
* On the Olimex LPC1766STK, the backlight level is controlled by PWM1.
*
****************************************************************************/
int nokia_backlight(unsigned int power)
{
uint32_t regval;
putreg32(NOKIA_BACKLIGHT_OFF + power, LPC17_PWM1_MR3);
regval = getreg32(LPC17_PWM1_LER);
regval |= PWM_LER_M3EN;
putreg32(regval, LPC17_PWM1_LER);
return OK;
}
#endif /* CONFIG_NX_LCDDRIVER && CONFIG_LCD_NOKIA6100 && CONFIG_LPC17_SSP0 */

206
configs/olimex-lpc1766stk/src/up_leds.c
View File

@ -1,206 +0,0 @@
/****************************************************************************
* configs/olimex-lpc1766stk/src/up_leds.c
* arch/arm/src/board/up_leds.c
*
* Copyright (C) 2010-2011, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "lpc17_gpio.h"
#include "lpc1766stk_internal.h"
/****************************************************************************
* Definitions
****************************************************************************/
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
* with CONFIG_DEBUG_VERBOSE too)
*/
#ifdef CONFIG_DEBUG_LEDS
# define leddbg lldbg
# ifdef CONFIG_DEBUG_VERBOSE
# define ledvdbg lldbg
# else
# define ledvdbg(x...)
# endif
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/* Dump GPIO registers */
#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_LEDS)
# define led_dumpgpio(m) lpc17_dumpgpio(LPC1766STK_LED1, m)
#else
# define led_dumpgpio(m)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
static bool g_uninitialized = true;
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: lpc17_ledinit/board_led_initialize
****************************************************************************/
#ifndef CONFIG_ARCH_LEDS
void lpc17_ledinit(void) /* Name when invoked externally */
#else
void board_led_initialize(void) /* Name when invoked via up_boot.c */
#endif
{
/* Configure all LED GPIO lines */
led_dumpgpio("board_led_initialize() Entry)");
lpc17_configgpio(LPC1766STK_LED1);
lpc17_configgpio(LPC1766STK_LED2);
led_dumpgpio("board_led_initialize() Exit");
}
/****************************************************************************
* Name: lpc17_setled
****************************************************************************/
#ifndef CONFIG_ARCH_LEDS
void lpc17_setled(int led, bool ledon)
{
if (led == BOARD_LED1)
{
lpc17_gpiowrite(LPC1766STK_LED1, !ledon);
}
else if (led == BOARD_LED2)
{
lpc17_gpiowrite(LPC1766STK_LED2, !ledon);
}
}
#endif
/****************************************************************************
* Name: lpc17_setleds
****************************************************************************/
#ifndef CONFIG_ARCH_LEDS
void lpc17_setleds(uint8_t ledset)
{
lpc17_gpiowrite(LPC1766STK_LED1, (ledset & BOARD_LED1_BIT) == 0);
lpc17_gpiowrite(LPC1766STK_LED2, (ledset & BOARD_LED2_BIT) == 0);
}
#endif
/****************************************************************************
* Name: board_led_on
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void board_led_on(int led)
{
switch (led)
{
default:
case 0 : /* STARTED, HEAPALLOCATE, IRQSENABLED */
lpc17_gpiowrite(LPC1766STK_LED1, true);
lpc17_gpiowrite(LPC1766STK_LED2, true);
break;
case 1 : /* STACKCREATED */
lpc17_gpiowrite(LPC1766STK_LED1, false);
lpc17_gpiowrite(LPC1766STK_LED2, true);
g_uninitialized = false;
break;
case 2 : /* INIRQ, SIGNAL, ASSERTION, PANIC */
lpc17_gpiowrite(LPC1766STK_LED2, false);
break;
case 3 : /* IDLE */
lpc17_gpiowrite(LPC1766STK_LED1, true);
break;
}
}
#endif
/****************************************************************************
* Name: board_led_off
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void board_led_off(int led)
{
switch (led)
{
default:
case 0 : /* STARTED, HEAPALLOCATE, IRQSENABLED */
case 1 : /* STACKCREATED */
lpc17_gpiowrite(LPC1766STK_LED1, true);
case 2 : /* INIRQ, SIGNAL, ASSERTION, PANIC */
lpc17_gpiowrite(LPC1766STK_LED2, true);
break;
case 3 : /* IDLE */
lpc17_gpiowrite(LPC1766STK_LED1, g_uninitialized);
break;
}
}
#endif

331
configs/olimex-lpc1766stk/src/up_nsh.c
View File

@ -1,331 +0,0 @@
/****************************************************************************
* config/olimex-lpc1766stk/src/up_nsh.c
* arch/arm/src/board/up_nsh.c
*
* Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <unistd.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/spi/spi.h>
#include <nuttx/mmcsd.h>
#include <nuttx/usb/usbhost.h>
#include "lpc17_ssp.h"
#include "lpc17_gpio.h"
#include "lpc17_usbhost.h"
#include "lpc1766stk_internal.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* PORT and SLOT number probably depend on the board configuration */
#ifdef CONFIG_ARCH_BOARD_LPC1766STK
# define NSH_HAVEMMCSD 1
# define NSH_HAVEUSBHOST 1
# if !defined(CONFIG_NSH_MMCSDSPIPORTNO) || CONFIG_NSH_MMCSDSPIPORTNO != 1
# error "The LPC1766-STK MMC/SD is on SSP1"
# undef CONFIG_NSH_MMCSDSPIPORTNO
# define CONFIG_NSH_MMCSDSPIPORTNO 1
# endif
# if !defined(CONFIG_NSH_MMCSDSLOTNO) || CONFIG_NSH_MMCSDSLOTNO != 0
# error "The LPC1766-STK MMC/SD is only one slot (0)"
# undef CONFIG_NSH_MMCSDSLOTNO
# define CONFIG_NSH_MMCSDSLOTNO 0
# endif
# ifndef CONFIG_LPC17_SSP1
# warning "CONFIG_LPC17_SSP1 is not enabled"
# undef NSH_HAVEMMCSD
# endif
#else
# error "Unrecognized board"
# undef NSH_HAVEMMCSD
# undef NSH_HAVEUSBHOST
#endif
/* Can't support MMC/SD features if mountpoints are disabled */
#if defined(CONFIG_DISABLE_MOUNTPOINT)
# undef NSH_HAVEMMCSD
#endif
#ifndef CONFIG_NSH_MMCSDMINOR
# define CONFIG_NSH_MMCSDMINOR 0
#endif
/* USB Host */
#ifdef CONFIG_USBHOST
# ifndef CONFIG_LPC17_USBHOST
# error "CONFIG_LPC17_USBHOST is not selected"
# endif
#endif
#ifdef CONFIG_LPC17_USBHOST
# ifndef CONFIG_USBHOST
# warning "CONFIG_USBHOST is not selected"
# endif
#endif
#if !defined(CONFIG_USBHOST) || !defined(CONFIG_LPC17_USBHOST)
# undef NSH_HAVEUSBHOST
#endif
#ifdef NSH_HAVEUSBHOST
# ifndef CONFIG_USBHOST_DEFPRIO
# define CONFIG_USBHOST_DEFPRIO 50
# endif
# ifndef CONFIG_USBHOST_STACKSIZE
# define CONFIG_USBHOST_STACKSIZE 1024
# endif
#endif
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lowsyslog(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lowsyslog
# else
# define message printf
# endif
#endif
/****************************************************************************
* Private Data
****************************************************************************/
#ifdef NSH_HAVEUSBHOST
static struct usbhost_connection_s *g_usbconn;
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_waiter
*
* Description:
* Wait for USB devices to be connected.
*
****************************************************************************/
#ifdef NSH_HAVEUSBHOST
static int nsh_waiter(int argc, char *argv[])
{
bool connected = false;
int ret;
message("nsh_waiter: Running\n");
for (;;)
{
/* Wait for the device to change state */
ret = CONN_WAIT(g_usbconn, &connected);
DEBUGASSERT(ret == OK);
connected = !connected;
message("nsh_waiter: %s\n", connected ? "connected" : "disconnected");
/* Did we just become connected? */
if (connected)
{
/* Yes.. enumerate the newly connected device */
(void)CONN_ENUMERATE(g_usbconn, 0);
}
}
/* Keep the compiler from complaining */
return 0;
}
#endif
/****************************************************************************
* Name: nsh_sdinitialize
*
* Description:
* Initialize SPI-based microSD.
*
****************************************************************************/
#ifdef NSH_HAVEMMCSD
static int nsh_sdinitialize(void)
{
FAR struct spi_dev_s *ssp;
int ret;
/* Enable power to the SD/MMC via a GPIO. LOW enables SD/MMC. */
lpc17_gpiowrite(LPC1766STK_MMC_PWR, false);
/* Get the SSP port */
ssp = lpc17_sspinitialize(CONFIG_NSH_MMCSDSPIPORTNO);
if (!ssp)
{
message("nsh_archinitialize: Failed to initialize SSP port %d\n",
CONFIG_NSH_MMCSDSPIPORTNO);
ret = -ENODEV;
goto errout;
}
message("Successfully initialized SSP port %d\n",
CONFIG_NSH_MMCSDSPIPORTNO);
/* Bind the SSP port to the slot */
ret = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR,
CONFIG_NSH_MMCSDSLOTNO, ssp);
if (ret < 0)
{
message("nsh_sdinitialize: "
"Failed to bind SSP port %d to MMC/SD slot %d: %d\n",
CONFIG_NSH_MMCSDSPIPORTNO,
CONFIG_NSH_MMCSDSLOTNO, ret);
goto errout;
}
message("Successfuly bound SSP port %d to MMC/SD slot %d\n",
CONFIG_NSH_MMCSDSPIPORTNO,
CONFIG_NSH_MMCSDSLOTNO);
return OK;
/* Disable power to the SD/MMC via a GPIO. HIGH disables SD/MMC. */
errout:
lpc17_gpiowrite(LPC1766STK_MMC_PWR, true);
return ret;
}
#else
# define nsh_sdinitialize() (OK)
#endif
/****************************************************************************
* Name: nsh_usbhostinitialize
*
* Description:
* Initialize SPI-based microSD.
*
****************************************************************************/
#ifdef NSH_HAVEUSBHOST
static int nsh_usbhostinitialize(void)
{
int pid;
int ret;
/* First, register all of the class drivers needed to support the drivers
* that we care about:
*/
message("nsh_usbhostinitialize: Register class drivers\n");
ret = usbhost_storageinit();
if (ret != OK)
{
message("nsh_usbhostinitialize: Failed to register the mass storage class\n");
}
/* Then get an instance of the USB host interface */
message("nsh_usbhostinitialize: Initialize USB host\n");
g_usbconn = lpc17_usbhost_initialize(0);
if (g_usbconn)
{
/* Start a thread to handle device connection. */
message("nsh_usbhostinitialize: Start nsh_waiter\n");
#ifndef CONFIG_CUSTOM_STACK
pid = task_create("usbhost", CONFIG_USBHOST_DEFPRIO,
CONFIG_USBHOST_STACKSIZE,
(main_t)nsh_waiter, (FAR char * const *)NULL);
#else
pid = task_create("usbhost", CONFIG_USBHOST_DEFPRIO,
(main_t)nsh_waiter, (FAR char * const *)NULL);
#endif
return pid < 0 ? -ENOEXEC : OK;
}
return -ENODEV;
}
#else
# define nsh_usbhostinitialize() (OK)
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int nsh_archinitialize(void)
{
int ret;
/* Initialize SPI-based microSD */
ret = nsh_sdinitialize();
if (ret == OK)
{
/* Initialize USB host */
ret = nsh_usbhostinitialize();
}
return ret;
}

381
configs/olimex-lpc1766stk/src/up_ssp.c
View File

@ -1,381 +0,0 @@
/************************************************************************************
* configs/olimex-lpc1766stk/src/up_ssp.c
* arch/arm/src/board/up_ssp.c
*
* Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/spi/spi.h>
#ifdef CONFIG_SPI_CALLBACK
#include <nuttx/irq.h>
#endif
#include <arch/board/board.h>
#include "up_arch.h"
#include "chip.h"
#include "lpc17_gpio.h"
#include "lpc17_ssp.h"
#include "lpc1766stk_internal.h"
#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
/************************************************************************************
* Definitions
************************************************************************************/
/* Configuration ************************************************************/
#ifdef CONFIG_SPI_CALLBACK
# ifndef CONFIG_GPIO_IRQ
# warning "CONFIG_GPIO_IRQ is required to support CONFIG_SPI_CALLBACK"
# endif
#endif
/* Debug ********************************************************************/
/* The following enable debug output from this file (needs CONFIG_DEBUG too).
*
* CONFIG_SSP_DEBUG - Define to enable basic SSP debug
* CONFIG_SSP_VERBOSE - Define to enable verbose SSP debug
*/
#ifdef CONFIG_SSP_DEBUG
# define sspdbg lldbg
# ifdef CONFIG_SSP_VERBOSE
# define sspvdbg lldbg
# else
# define sspvdbg(x...)
# endif
#else
# undef CONFIG_SSP_VERBOSE
# define sspdbg(x...)
# define sspvdbg(x...)
#endif
/* Dump GPIO registers */
#ifdef CONFIG_SSP_VERBOSE
# define ssp_dumpssp0gpio(m) lpc17_dumpgpio(LPC1766STK_LCD_CS, m)
# define ssp_dumpssp1gpio(m) lpc17_dumpgpio(LPC1766STK_MMC_CS, m)
#else
# define ssp_dumpssp0gpio(m)
# define ssp_dumpssp1gpio(m)
#endif
/************************************************************************************
* Private Types
************************************************************************************/
/* This structure describes on media change callback */
#ifdef CONFIG_SPI_CALLBACK
struct lpc17_mediachange_s
{
spi_mediachange_t callback; /* The media change callback */
FAR void *arg; /* Callback argument */
};
#endif
/************************************************************************************
* Private Data
************************************************************************************/
/* Registered media change callback */
#ifdef CONFIG_SPI_CALLBACK
#ifdef CONFIG_LPC17_SSP0
static struct lpc17_mediachange_s g_ssp0callback;
#endif
#ifdef CONFIG_LPC17_SSP1
static struct lpc17_mediachange_s g_ssp1callback;
#endif
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Name: ssp_cdirqsetup
*
* Description:
* Setup to receive a card detection interrupt
*
************************************************************************************/
#ifdef CONFIG_SPI_CALLBACK
static void ssp_cdirqsetup(int irq, xcpt_t irqhandler)
{
irqstate_t flags;
/* Disable interrupts until we are done */
flags = irqsave();
/* Configure the interrupt. Either attach and enable the new
* interrupt or disable and detach the old interrupt handler.
*/
if (irqhandler)
{
/* Attach then enable the new interrupt handler */
(void)irq_attach(irq, irqhandler);
up_enable_irq(irq);
}
else
{
/* Disable then detach the old interrupt handler */
up_disable_irq(irq);
(void)irq_detach(irq);
}
}
#endif
/************************************************************************************
* Name: ssp0/1_cdinterrupt
*
* Description:
* Handle card detection interrupt
*
************************************************************************************/
#ifdef CONFIG_SPI_CALLBACK
#ifdef CONFIG_LPC17_SSP0
static int ssp0_cdinterrupt(int irq, FAR void *context)
{
/* Invoke the media change callback */
if (g_ssp0callback.callback)
{
g_ssp0callback.callback(g_ssp0callback.arg);
}
return OK;
}
#endif
#ifdef CONFIG_LPC17_SSP1
static int ssp1_cdinterrupt(int irq, FAR void *context)
{
/* Invoke the media change callback */
if (g_ssp1callback.callback)
{
g_ssp1callback.callback(g_ssp1callback.arg);
}
return OK;
}
#endif
#endif
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lpc1766stk_sspinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the LPC1766-STK.
*
************************************************************************************/
void weak_function lpc1766stk_sspinitialize(void)
{
/* Configure the SSP0 chip select GPIOs. Only the Nokia LCD is connected to SSP0 */
#ifdef CONFIG_LPC17_SSP0
ssp_dumpssp0gpio("BEFORE SSP0 Initialization");
lpc17_configgpio(LPC1766STK_LCD_CS);
ssp_dumpssp0gpio("AFTER SSP0 Initialization");
#endif
/* Configure SSP1 chip select GPIOs. Only the SD/MMC card slot is connected to SSP1 */
#ifdef CONFIG_LPC17_SSP1
ssp_dumpssp0gpio("BEFORE SSP1 Initialization");
lpc17_configgpio(LPC1766STK_MMC_CS);
/* Also configure the SD/MMC power GPIO (but leave power off). This really has
* nothing to do with SSP, but does belong with other SD/MMC GPIO configuration
* settings.
*/
lpc17_configgpio(LPC1766STK_MMC_PWR);
ssp_dumpssp0gpio("AFTER SSP1 Initialization");
#endif
#ifdef CONFIG_SPI_CALLBACK
/* If there were any CD detect pins for the LPC1766-STK, this is where
* they would be configured.
*/
#endif
}
/************************************************************************************
* Name: lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
*
* Description:
* The external functions, lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
* must be provided by board-specific logic. They are implementations of the select
* and status methods of the SPI interface defined by struct spi_ops_s (see
* include/nuttx/spi/spi.h). All other methods (including lpc17_sspinitialize())
* are provided by common LPC17xx logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in lpc17_boardinitialize() to configure SPI/SSP chip select
* pins.
* 2. Provide lpc17_ssp0/ssp1select() and lpc17_ssp0/ssp1status() functions
* in your board-specific logic. These functions will perform chip selection
* and status operations using GPIOs in the way your board is configured.
* 3. Add a calls to lpc17_sspinitialize() in your low level application
* initialization logic
* 4. The handle returned by lpc17_sspinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
************************************************************************************/
#ifdef CONFIG_LPC17_SSP0
void lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
if (devid == SPIDEV_DISPLAY)
{
/* Assert/de-assert the CS pin to the card */
ssp_dumpssp0gpio("lpc17_ssp0select() Entry");
lpc17_gpiowrite(LPC1766STK_LCD_CS, !selected);
ssp_dumpssp0gpio("lpc17_ssp0select() Exit");
}
}
uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
sspdbg("Returning nothing\n");
return 0;
}
#endif
#ifdef CONFIG_LPC17_SSP1
void lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
if (devid == SPIDEV_MMCSD)
{
/* Assert/de-assert the CS pin to the card */
ssp_dumpssp1gpio("lpc17_ssp1select() Entry");
lpc17_gpiowrite(LPC1766STK_MMC_CS, !selected);
ssp_dumpssp1gpio("lpc17_ssp1select() Exit");
}
}
uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
sspdbg("Returning SPI_STATUS_PRESENT\n");
return SPI_STATUS_PRESENT;
}
#endif
/************************************************************************************
* Name: lpc17_ssp0/1register
*
* Description:
* If the board supports a card detect callback to inform the SPI-based
* MMC/SD drvier when an SD card is inserted or removed, then
* CONFIG_SPI_CALLBACK should be defined and the following function(s) must
* must be implemented. These functiosn implements the registercallback
* method of the SPI interface (see include/nuttx/spi/spi.h for details)
*
* Input Parameters:
* dev - Device-specific state data
* callback - The funtion to call on the media change
* arg - A caller provided value to return with the callback
*
* Returned Value:
* 0 on success; negated errno on failure.
*
************************************************************************************/
#ifdef CONFIG_SPI_CALLBACK
#ifdef CONFIG_LPC17_SSP0
/* If there were any CD detect pins on the LPC1766-STK, this is how the
* would be configured.
*/
int lpc17_ssp0register(FAR struct spi_dev_s *dev, spi_mediachange_t callback, void *arg)
{
/* Save the callback information */
#if 0
g_ssp0callback.callback = callback;
g_ssp0callback.arg = arg;
/* Setup the interrupt */
spi_cdirqsetup(LPC1766STK_SPICD_IRQ, ssp0_cdinterrupt);
#endif
return OK;
}
#endif
#ifdef CONFIG_LPC17_SSP1
int lpc17_ssp1register(FAR struct spi_dev_s *dev, spi_mediachange_t callback, void *arg)
{
/* Save the callback information */
#if 0
g_ssp1callback.callback = callback;
g_ssp1callback.arg = arg;
/* Setup the interrupt */
spi_cdirqsetup(LPC1766STK_SPICD_IRQ, ssp1_cdinterrupt);
#endif
return OK;
}
#endif
#endif
#endif /* CONFIG_LPC17_SSP0 || CONFIG_LPC17_SSP1 */

155
configs/olimex-lpc1766stk/src/up_usbmsc.c
View File

@ -1,155 +0,0 @@
/****************************************************************************
* configs/olimex-lpc1766stk/src/up_usbmsc.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Configure and register the LPC17xx MMC/SD SPI block driver.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/spi/spi.h>
#include <nuttx/mmcsd.h>
#include "lpc17_gpio.h"
#include "lpc1766stk_internal.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_SYSTEM_USBMSC_DEVMINOR1
# define CONFIG_SYSTEM_USBMSC_DEVMINOR1 0
#endif
/* PORT and SLOT number probably depend on the board configuration */
#ifdef CONFIG_ARCH_BOARD_LPC1766STK
# undef LPC17XX_MMCSDSPIPORTNO
# define LPC17XX_MMCSDSPIPORTNO 1
# undef LPC17XX_MMCSDSLOTNO
# define LPC17XX_MMCSDSLOTNO 0
#else
/* Add configuration for new LPC17xx boards here */
# error "Unrecognized LPC17xx board"
#endif
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lowsyslog(__VA_ARGS__)
# define msgflush()
# else
# define message(...) printf(__VA_ARGS__)
# define msgflush() fflush(stdout)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lowsyslog
# define msgflush()
# else
# define message printf
# define msgflush() fflush(stdout)
# endif
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: usbmsc_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int usbmsc_archinitialize(void)
{
FAR struct spi_dev_s *spi;
int ret;
/* Enable power to the SD/MMC via a GPIO. LOW enables SD/MMC. */
lpc17_gpiowrite(LPC1766STK_MMC_PWR, false);
/* Get the SPI port */
message("usbmsc_archinitialize: Initializing SPI port %d\n",
LPC17XX_MMCSDSPIPORTNO);
spi = lpc17_sspinitialize(LPC17XX_MMCSDSPIPORTNO);
if (!spi)
{
message("usbmsc_archinitialize: Failed to initialize SPI port %d\n",
LPC17XX_MMCSDSPIPORTNO);
ret = -ENODEV;
goto errout;
}
message("usbmsc_archinitialize: Successfully initialized SPI port %d\n",
LPC17XX_MMCSDSPIPORTNO);
/* Bind the SPI port to the slot */
message("usbmsc_archinitialize: Binding SPI port %d to MMC/SD slot %d\n",
LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO);
ret = mmcsd_spislotinitialize(CONFIG_SYSTEM_USBMSC_DEVMINOR1, LPC17XX_MMCSDSLOTNO, spi);
if (ret < 0)
{
message("usbmsc_archinitialize: Failed to bind SPI port %d to MMC/SD slot %d: %d\n",
LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO, ret);
goto errout;
}
message("usbmsc_archinitialize: Successfuly bound SPI port %d to MMC/SD slot %d\n",
LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO);
return OK;
/* Disable power to the SD/MMC via a GPIO. HIGH disables SD/MMC. */
errout:
lpc17_gpiowrite(LPC1766STK_MMC_PWR, true);
return ret;}