sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

configs: Still trying to get consistent name. button driver expects board to define NUM_BUTTONS, not BOARD_NUM_BUTTONS. That was changed in all board.h header files, but there are still references in configs/ C files to BOARD_NUM_BUTTONS

Browse Source
This commit is contained in:
Gregory Nutt 2017-12-17 16:54:53 -06:00
parent 7ca9e8c376
commit bd8a07a4b2
7 changed files with 34 additions and 34 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
configs/bambino-200e/src/lpc43_buttons.c
View File

@ -61,7 +61,7 @@
* by the BUTTON_* definitions in board.h
*/
static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
static const uint16_t g_buttoncfg[NUM_BUTTONS] =
{
BAMBINO_BUT1
};
@ -71,7 +71,7 @@ static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
* numbers.
*/
static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
static uint8_t g_buttonirq[NUM_BUTTONS] =
{
BAMBINO_BUT1_IRQ
};
@ -98,7 +98,7 @@ void board_button_initialize(void)
/* Configure the GPIO pins as interrupting inputs. */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
lpc43_configgpio(g_buttoncfg[i]);
}
@ -127,7 +127,7 @@ uint32_t board_buttons(void)
/* Check that state of each key */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
/* A LOW value means that the key is pressed. */
@ -172,7 +172,7 @@ int board_button_irq(int id, xcpt_t irqhandler, FAR void *arg)
/* Verify that the button ID is within range */
if ((unsigned)id < BOARD_NUM_BUTTONS)
if ((unsigned)id < NUM_BUTTONS)
{
/* Disable interrupts until we are done */

10
configs/lincoln60/src/lpc17_buttons.c
View File

@ -64,7 +64,7 @@
* the BUTTON_* and JOYSTICK_* definitions in board.h
*/
static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
static const uint16_t g_buttoncfg[NUM_BUTTONS] =
{
LINCOLN60_BUT1
};
@ -74,7 +74,7 @@ static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
* numbers.
*/
static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
static uint8_t g_buttonirq[NUM_BUTTONS] =
{
LINCOLN60_BUT1_IRQ
};
@ -105,7 +105,7 @@ void board_button_initialize(void)
/* Configure the GPIO pins as interrupting inputs. */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
lpc17_configgpio(g_buttoncfg[i]);
}
@ -134,7 +134,7 @@ uint32_t board_buttons(void)
/* Check that state of each key */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
/* A LOW value means that the key is pressed. */
@ -179,7 +179,7 @@ int board_button_irq(int id, xcpt_t irqhandler, FAR void *arg)
/* Verify that the button ID is within range */
if ((unsigned)id < BOARD_NUM_BUTTONS)
if ((unsigned)id < NUM_BUTTONS)
{
/* Disable interrupts until we are done */

10
configs/lpc4330-xplorer/src/lpc43_buttons.c
View File

@ -63,7 +63,7 @@
* by the BUTTON_* definitions in board.h
*/
static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
static const uint16_t g_buttoncfg[NUM_BUTTONS] =
{
LPC4330_XPLORER_BUT1
};
@ -73,7 +73,7 @@ static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
* numbers.
*/
static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
static uint8_t g_buttonirq[NUM_BUTTONS] =
{
LPC4330_XPLORER_BUT1_IRQ
};
@ -104,7 +104,7 @@ void board_button_initialize(void)
/* Configure the GPIO pins as interrupting inputs. */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
lpc43_configgpio(g_buttoncfg[i]);
}
@ -133,7 +133,7 @@ uint32_t board_buttons(void)
/* Check that state of each key */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
/* A LOW value means that the key is pressed. */
@ -178,7 +178,7 @@ int board_button_irq(int id, xcpt_t irqhandler, FAR void *arg)
/* Verify that the button ID is within range */
if ((unsigned)id < BOARD_NUM_BUTTONS)
if ((unsigned)id < NUM_BUTTONS)
{
/* Disable interrupts until we are done */

10
configs/lpc4357-evb/src/lpc43_buttons.c
View File

@ -65,7 +65,7 @@
*/
#if 0 /* Not yet used */
static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
static const uint16_t g_buttoncfg[NUM_BUTTONS] =
{
};
@ -74,7 +74,7 @@ static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
* numbers.
*/
static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
static uint8_t g_buttonirq[NUM_BUTTONS] =
{
};
#endif
@ -106,7 +106,7 @@ void board_button_initialize(void)
/* Configure the GPIO pins as interrupting inputs. */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
lpc43_configgpio(g_buttoncfg[i]);
}
@ -137,7 +137,7 @@ uint32_t board_buttons(void)
/* Check that state of each key */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
/* A LOW value means that the key is pressed. */
@ -187,7 +187,7 @@ int board_button_irq(int id, xcpt_t irqhandler, FAR void *arg)
/* Verify that the button ID is within range */
if ((unsigned)id < BOARD_NUM_BUTTONS)
if ((unsigned)id < NUM_BUTTONS)
{
/* Disable interrupts until we are done */

10
configs/olimex-lpc1766stk/src/lpc17_buttons.c
View File

@ -64,7 +64,7 @@
* the BUTTON_* and JOYSTICK_* definitions in board.h
*/
static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
static const uint16_t g_buttoncfg[NUM_BUTTONS] =
{
LPC1766STK_BUT1, LPC1766STK_BUT2, LPC1766STK_WAKEUP, LPC1766STK_CENTER,
LPC1766STK_UP, LPC1766STK_DOWN, LPC1766STK_LEFT, LPC1766STK_RIGHT
@ -75,7 +75,7 @@ static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
* numbers.
*/
static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
static uint8_t g_buttonirq[NUM_BUTTONS] =
{
LPC1766STK_BUT1_IRQ, LPC1766STK_BUT2_IRQ, LPC1766STK_WAKEUP_IRQ,
LPC1766STK_CENTER_IRQ, LPC1766STK_UP_IRQ, LPC1766STK_DOWN_IRQ,
@ -108,7 +108,7 @@ void board_button_initialize(void)
/* Configure the GPIO pins as interrupting inputs. */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
lpc17_configgpio(g_buttoncfg[i]);
}
@ -137,7 +137,7 @@ uint32_t board_buttons(void)
/* Check that state of each key */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
/* A LOW value means that the key is pressed. */
@ -182,7 +182,7 @@ int board_button_irq(int id, xcpt_t irqhandler, FAR void *arg)
/* Verify that the button ID is within range */
if ((unsigned)id < BOARD_NUM_BUTTONS)
if ((unsigned)id < NUM_BUTTONS)
{
/* Disable interrupts until we are done */

10
configs/open1788/src/lpc17_buttons.c
View File

@ -81,7 +81,7 @@
* the BUTTON_* and JOYSTICK_* definitions in board.h
*/
static const lpc17_pinset_t g_buttoncfg[BOARD_NUM_BUTTONS] =
static const lpc17_pinset_t g_buttoncfg[NUM_BUTTONS] =
{
GPIO_USER1, GPIO_USER2, GPIO_USER3, GPIO_JOY_A,
GPIO_JOY_B, GPIO_JOY_C, GPIO_JOY_D, GPIO_JOY_CTR
@ -92,7 +92,7 @@ static const lpc17_pinset_t g_buttoncfg[BOARD_NUM_BUTTONS] =
* numbers.
*/
static const uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
static const uint8_t g_buttonirq[NUM_BUTTONS] =
{
0, GPIO_USER2_IRQ, GPIO_USER3_IRQ, GPIO_JOY_A_IRQ,
GPIO_JOY_B_IRQ, GPIO_JOY_C_IRQ, GPIO_JOY_D_IRQ, GPIO_JOY_CTR_IRQ
@ -120,7 +120,7 @@ void board_button_initialize(void)
/* Configure the GPIO pins as interrupting inputs. */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
lpc17_configgpio(g_buttoncfg[i]);
}
@ -149,7 +149,7 @@ uint32_t board_buttons(void)
/* Check that state of each key */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
/* A LOW value means that the key is pressed. */
@ -196,7 +196,7 @@ int board_button_irq(int id, xcpt_t irqhandler, FAR void *arg)
/* Verify that the button ID is within range */
if ((unsigned)id < BOARD_NUM_BUTTONS)
if ((unsigned)id < NUM_BUTTONS)
{
/* Get the IRQ number for the button; A value of zero indicates that
* the button does not support the interrupt function.

8
configs/zkit-arm-1769/src/lpc17_buttons.c
View File

@ -68,10 +68,10 @@
* Private Data
****************************************************************************/
/* Pin configuration for each zkit-arm-1769 button. This array is indexed by
* BOARD_NUM_BUTTONS in board.h
* NUM_BUTTONS in board.h
*/
static const uint16_t g_buttons[BOARD_NUM_BUTTONS] =
static const uint16_t g_buttons[NUM_BUTTONS] =
{
ZKITARM_KEY1, ZKITARM_KEY2, ZKITARM_KEY3, ZKITARM_KEY4, ZKITARM_KEY5
};
@ -99,7 +99,7 @@ void board_button_initialize(void)
* configured for some pins but NOT used in this file
*/
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
lpc17_configgpio(g_buttons[i]);
}
@ -117,7 +117,7 @@ uint32_t board_buttons(void)
/* Check that state of each key */
for (i = 0; i < BOARD_NUM_BUTTONS; i++)
for (i = 0; i < NUM_BUTTONS; i++)
{
released = lpc17_gpioread(g_buttons[i]);