more i.MX logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1702 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
cbb675b0c2
commit
bfb4e1f48c
@ -106,12 +106,12 @@ void up_decodeirq(uint32* regs)
|
||||
|
||||
irq_dispatch(irq, regs);
|
||||
|
||||
/* Indicate that we are no long in an interrupt handler */
|
||||
/* Indicate that we are no longer in an interrupt handler */
|
||||
|
||||
current_regs = NULL;
|
||||
|
||||
/* Unmask the last interrupt (global interrupts are still
|
||||
* disabled.
|
||||
* disabled).
|
||||
*/
|
||||
|
||||
up_enable_irq(irq);
|
||||
|
||||
@ -1,88 +1,128 @@
|
||||
/************************************************************************************
|
||||
* arch/arm/src/imx/imx_cspi.h
|
||||
*
|
||||
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_IMX_CSPI_H
|
||||
#define __ARCH_ARM_IMX_CSPI_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* CSPI Register Offsets ************************************************************/
|
||||
|
||||
#define CSPI_SPIRXD_OFFSET 0x0000
|
||||
#define CSPI_SPITXD_OFFSET 0x0004
|
||||
#define CSPI_SPICONT1_OFFSET 0x0008
|
||||
#define CSPI_INTCS_OFFSET 0x000c
|
||||
#define CSPI_SPITEST_OFFSET 0x0010
|
||||
#define CSPI_SPISPCR_OFFSET 0x0014
|
||||
#define CSPI_SPIDMA_OFFSET 0x0018
|
||||
#define CSPI_SPIRESET_OFFSET 0x001c
|
||||
|
||||
/* CSPI Register Addresses **********************************************************/
|
||||
|
||||
/* CSPI1 */
|
||||
|
||||
#define IMX_CSPI1_SPIRXD (IMX_CSPI1_VBASE + CSPI_SPIRXD_OFFSET)
|
||||
#define IMX_CSPI1_SPITXD (IMX_CSPI1_VBASE + CSPI_SPITXD_OFFSET)
|
||||
#define IMX_CSPI1_SPICONT1 (IMX_CSPI1_VBASE + CSPI_SPICONT1_OFFSET)
|
||||
#define IMX_CSPI1_INTCS (IMX_CSPI1_VBASE + CSPI_INTCS_OFFSET)
|
||||
#define IMX_CSPI1_SPITEST (IMX_CSPI1_VBASE + CSPI_SPITEST_OFFSET)
|
||||
#define IMX_CSPI1_SPISPCR (IMX_CSPI1_VBASE + CSPI_SPISPCR_OFFSET)
|
||||
#define IMX_CSPI1_SPIDMA (IMX_CSPI1_VBASE + CSPI_SPIDMA_OFFSET)
|
||||
#define IMX_CSPI1_SPIRESET (IMX_CSPI1_VBASE + CSPI_SPIRESET_OFFSET)
|
||||
|
||||
/* CSPI1 */
|
||||
|
||||
#define IMX_CSPI2_SPIRXD (IMX_CSPI2_VBASE + CSPI_SPIRXD_OFFSET)
|
||||
#define IMX_CSPI2_SPITXD (IMX_CSPI2_VBASE + CSPI_SPITXD_OFFSET)
|
||||
#define IMX_CSPI2_SPICONT1 (IMX_CSPI2_VBASE + CSPI_SPICONT1_OFFSET)
|
||||
#define IMX_CSPI2_INTCS (IMX_CSPI2_VBASE + CSPI_INTCS_OFFSET)
|
||||
#define IMX_CSPI2_SPITEST (IMX_CSPI2_VBASE + CSPI_SPITEST_OFFSET)
|
||||
#define IMX_CSPI2_SPISPCR (IMX_CSPI2_VBASE + CSPI_SPISPCR_OFFSET)
|
||||
#define IMX_CSPI2_SPIDMA (IMX_CSPI2_VBASE + CSPI_SPIDMA_OFFSET)
|
||||
#define IMX_CSPI2_SPIRESET (IMX_CSPI2_VBASE + CSPI_SPIRESET_OFFSET)
|
||||
|
||||
/* CSPI Register Bit Definitions ****************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Inline Functions
|
||||
************************************************************************************/
|
||||
|
||||
#endif /* __ARCH_ARM_IMX_CSPI_H */
|
||||
/************************************************************************************
|
||||
* arch/arm/src/imx/imx_cspi.h
|
||||
*
|
||||
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_IMX_CSPI_H
|
||||
#define __ARCH_ARM_IMX_CSPI_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* CSPI Register Offsets ************************************************************/
|
||||
|
||||
#define CSPI_SPIRXD_OFFSET 0x0000
|
||||
#define CSPI_SPITXD_OFFSET 0x0004
|
||||
#define CSPI_SPICONT1_OFFSET 0x0008
|
||||
#define CSPI_INTCS_OFFSET 0x000c
|
||||
#define CSPI_SPITEST_OFFSET 0x0010
|
||||
#define CSPI_SPISPCR_OFFSET 0x0014
|
||||
#define CSPI_SPIDMA_OFFSET 0x0018
|
||||
#define CSPI_SPIRESET_OFFSET 0x001c
|
||||
|
||||
/* CSPI Register Addresses **********************************************************/
|
||||
|
||||
/* CSPI1 */
|
||||
|
||||
#define IMX_CSPI1_SPIRXD (IMX_CSPI1_VBASE + CSPI_SPIRXD_OFFSET)
|
||||
#define IMX_CSPI1_SPITXD (IMX_CSPI1_VBASE + CSPI_SPITXD_OFFSET)
|
||||
#define IMX_CSPI1_SPICONT1 (IMX_CSPI1_VBASE + CSPI_SPICONT1_OFFSET)
|
||||
#define IMX_CSPI1_INTCS (IMX_CSPI1_VBASE + CSPI_INTCS_OFFSET)
|
||||
#define IMX_CSPI1_SPITEST (IMX_CSPI1_VBASE + CSPI_SPITEST_OFFSET)
|
||||
#define IMX_CSPI1_SPISPCR (IMX_CSPI1_VBASE + CSPI_SPISPCR_OFFSET)
|
||||
#define IMX_CSPI1_SPIDMA (IMX_CSPI1_VBASE + CSPI_SPIDMA_OFFSET)
|
||||
#define IMX_CSPI1_SPIRESET (IMX_CSPI1_VBASE + CSPI_SPIRESET_OFFSET)
|
||||
|
||||
/* CSPI1 */
|
||||
|
||||
#define IMX_CSPI2_SPIRXD (IMX_CSPI2_VBASE + CSPI_SPIRXD_OFFSET)
|
||||
#define IMX_CSPI2_SPITXD (IMX_CSPI2_VBASE + CSPI_SPITXD_OFFSET)
|
||||
#define IMX_CSPI2_SPICONT1 (IMX_CSPI2_VBASE + CSPI_SPICONT1_OFFSET)
|
||||
#define IMX_CSPI2_INTCS (IMX_CSPI2_VBASE + CSPI_INTCS_OFFSET)
|
||||
#define IMX_CSPI2_SPITEST (IMX_CSPI2_VBASE + CSPI_SPITEST_OFFSET)
|
||||
#define IMX_CSPI2_SPISPCR (IMX_CSPI2_VBASE + CSPI_SPISPCR_OFFSET)
|
||||
#define IMX_CSPI2_SPIDMA (IMX_CSPI2_VBASE + CSPI_SPIDMA_OFFSET)
|
||||
#define IMX_CSPI2_SPIRESET (IMX_CSPI2_VBASE + CSPI_SPIRESET_OFFSET)
|
||||
|
||||
/* CSPI Register Bit Definitions ****************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Inline Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
#ifdef __cplusplus
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/* The external functions, imx_spiselect and imx_spistatus must be provided by
|
||||
* board-specific logic. The are implementations of the select and status methods
|
||||
* SPI interface defined by struct spi_ops_s (see include/nuttx/spi.h). All other
|
||||
* methods (including up_spiinitialize()) are provided by common logic. To use this
|
||||
* common SPI logic on your board:
|
||||
*
|
||||
* 1. Provide imx_spiselect() and imx_spistatus() functions in your board-specific
|
||||
* logic. This function will perform chip selection and status operations using
|
||||
* GPIOs in the way your board is configured.
|
||||
* 2. Add a call to up_spiinitialize() in your low level initialization logic
|
||||
* 3. The handle returned by up_spiinitialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling mmcsd_spislotinitialize(),
|
||||
* for example, will bind the SPI driver to the SPI MMC/SD driver).
|
||||
*/
|
||||
|
||||
EXTERN void imx_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, boolean selected);
|
||||
EXTERN ubyte imx_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
|
||||
|
||||
#undef EXTERN
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif /* __cplusplus */
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
#endif /* __ARCH_ARM_IMX_CSPI_H */
|
||||
|
||||
@ -79,45 +79,51 @@ void up_decodeirq(uint32* regs)
|
||||
uint32 regval;
|
||||
int irq;
|
||||
|
||||
/* Decode the interrupt. First, fetch the NIVECSR register. */
|
||||
|
||||
regval = getreg32(IMX_AITC_NIVECSR);
|
||||
|
||||
/* The MS 16 bits of the NIVECSR register contains vector index for the
|
||||
* highest pending normal interrupt.
|
||||
/* Current regs non-zero indicates that we are processing an interrupt;
|
||||
* current_regs is also used to manage interrupt level context switches.
|
||||
*/
|
||||
|
||||
irq = regval >> AITC_NIVECSR_NIVECTOR_SHIFT;
|
||||
current_regs = regs;
|
||||
|
||||
/* If irq < 64, then this is the IRQ. If there is no pending interrupt,
|
||||
* then irq will be >= 64 (it will be 0xffff for illegal source).
|
||||
*/
|
||||
/* Loop while there are pending interrupts to be processed */
|
||||
|
||||
if (irq < NR_IRQS)
|
||||
do
|
||||
{
|
||||
/* Mask and acknowledge the interrupt */
|
||||
/* Decode the interrupt. First, fetch the NIVECSR register. */
|
||||
|
||||
up_maskack_irq(irq);
|
||||
regval = getreg32(IMX_AITC_NIVECSR);
|
||||
|
||||
/* Current regs non-zero indicates that we are processing an interrupt;
|
||||
* current_regs is also used to manage interrupt level context switches.
|
||||
/* The MS 16 bits of the NIVECSR register contains vector index for the
|
||||
* highest pending normal interrupt.
|
||||
*/
|
||||
|
||||
current_regs = regs;
|
||||
irq = regval >> AITC_NIVECSR_NIVECTOR_SHIFT;
|
||||
|
||||
/* Deliver the IRQ */
|
||||
|
||||
irq_dispatch(irq, regs);
|
||||
|
||||
/* Indicate that we are no long in an interrupt handler */
|
||||
|
||||
current_regs = NULL;
|
||||
|
||||
/* Unmask the last interrupt (global interrupts are still
|
||||
* disabled.
|
||||
/* If irq < 64, then this is the IRQ. If there is no pending interrupt,
|
||||
* then irq will be >= 64 (it will be 0xffff for illegal source).
|
||||
*/
|
||||
|
||||
up_enable_irq(irq);
|
||||
if (irq < NR_IRQS)
|
||||
{
|
||||
/* Mask and acknowledge the interrupt */
|
||||
|
||||
up_maskack_irq(irq);
|
||||
|
||||
/* Deliver the IRQ */
|
||||
|
||||
irq_dispatch(irq, regs);
|
||||
|
||||
/* Unmask the last interrupt (global interrupts are still
|
||||
* disabled).
|
||||
*/
|
||||
|
||||
up_enable_irq(irq);
|
||||
}
|
||||
}
|
||||
while (irq < NR_IRQS);
|
||||
|
||||
/* Indicate that we are no longer in an interrupt handler */
|
||||
|
||||
current_regs = NULL;
|
||||
#endif
|
||||
}
|
||||
|
||||
481
arch/arm/src/imx/imx_spi.c
Executable file
481
arch/arm/src/imx/imx_spi.c
Executable file
@ -0,0 +1,481 @@
|
||||
/****************************************************************************
|
||||
* arch/arm/src/imx/imx_spi.c
|
||||
*
|
||||
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/spi.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/spi.h>
|
||||
#include <arch/io.h>
|
||||
|
||||
#include "up_internal.h"
|
||||
#include "up_arch.h"
|
||||
|
||||
#include "chip.h"
|
||||
#include "imx_cspi.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* The i.MX1/L supports 2 SPI interfaces. Which have been endabled? */
|
||||
|
||||
#ifndef CONFIG_SPI1_DISABLE
|
||||
# define SPI1_NDX 0 /* Index to SPI1 in g_spidev[] */
|
||||
# ifndef CONFIG_SPI2_DISABLE
|
||||
# define SPI2_NDX 1 /* Index to SPI2 in g_spidev[] */
|
||||
# define NSPIS 2 /* Two SPI interfaces: SPI1 & SPI2 */
|
||||
# else
|
||||
# define NSPIS 1 /* One SPI interface: SPI1 */
|
||||
# endif
|
||||
#else
|
||||
# ifndef CONFIG_SPI2_DISABLE
|
||||
# define SPI2_NDX 0 /* Index to SPI2 in g_spidev[] */
|
||||
# define NSPIS 1 /* One SPI interface: SPI2 */
|
||||
# else
|
||||
# define NSPIS 0 /* No SPI interfaces */
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* Compile the rest of the file only if at least one SPI interface has been
|
||||
* enabled.
|
||||
*/
|
||||
|
||||
#if NSPIS > 0
|
||||
|
||||
/****************************************************************************
|
||||
* Private Type Definitions
|
||||
****************************************************************************/
|
||||
|
||||
struct imx_spidev_s
|
||||
{
|
||||
const struct spi_ops_s *ops; /* Common SPI operations */
|
||||
uint32 base; /* SPI register base address */
|
||||
};
|
||||
|
||||
/****************************************************************************
|
||||
* Private Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
/* SPI helpers */
|
||||
|
||||
static inline uint32 spi_getreg(struct imx_spidev_s *priv, unsigned int offset);
|
||||
static inline void spi_readreg(struct imx_spidev_s *priv, unsigned int offset, uint32 value);
|
||||
static ubyte spi_waitspif(struct imx_spidev_s *priv);
|
||||
static ubyte spi_transfer(struct imx_spidev_s *priv, ubyte ch);
|
||||
|
||||
/* SPI methods */
|
||||
|
||||
static uint32 spi_setfrequency(FAR struct spi_dev_s *dev, uint32 frequency);
|
||||
static void spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode);
|
||||
static ubyte spi_sndbyte(FAR struct spi_dev_s *dev, ubyte ch);
|
||||
static void spi_sndblock(FAR struct spi_dev_s *dev, FAR const ubyte *buffer, size_t buflen);
|
||||
static void spi_recvblock(FAR struct spi_dev_s *dev, FAR ubyte *buffer, size_t buflen);
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/* Common SPI operations */
|
||||
|
||||
static const struct spi_ops_s g_spiops =
|
||||
{
|
||||
imx_spiselect, /* Provided externally by board logic */
|
||||
spi_setfrequency,
|
||||
spi_setmode,
|
||||
imx_spistatus, /* Provided externally by board logic */
|
||||
spi_sndbyte,
|
||||
spi_sndblock,
|
||||
spi_recvblock,
|
||||
};
|
||||
|
||||
/* This supports is up to two SPI busses/ports */
|
||||
|
||||
static struct imx_spidev_s g_spidev[] =
|
||||
{
|
||||
#ifndef CONFIG_SPI1_DISABLE
|
||||
{
|
||||
.ops = &g_spiops,
|
||||
.base = IMX_CSPI1_VBASE
|
||||
},
|
||||
#endif
|
||||
#ifndef CONFIG_SPI1_DISABLE
|
||||
{
|
||||
.ops = &g_spiops,
|
||||
.base = IMX_CSPI2_VBASE
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
/****************************************************************************
|
||||
* Public Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: spi_getreg
|
||||
*
|
||||
* Description:
|
||||
* Read the SPI register at this offeset
|
||||
*
|
||||
* Input Parameters:
|
||||
* priv - Device-specific state data
|
||||
* offset - Offset to the SPI register from the register base address
|
||||
*
|
||||
* Returned Value:
|
||||
* Value of the register at this offset
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static inline uint32 spi_getreg(struct imx_spidev_s *priv, unsigned int offset)
|
||||
{
|
||||
return getreg32(priv->base + offset);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: spi_putreg
|
||||
*
|
||||
* Description:
|
||||
* Write the value to the SPI register at this offeset
|
||||
*
|
||||
* Input Parameters:
|
||||
* priv - Device-specific state data
|
||||
* offset - Offset to the SPI register from the register base address
|
||||
* value - Value to write
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static inline void spi_readreg(struct imx_spidev_s *priv, unsigned int offset, uint32 value)
|
||||
{
|
||||
putreg32(value, priv->base + offset);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: spi_waitspif
|
||||
*
|
||||
* Description:
|
||||
* Wait space available in the Tx FIFO.
|
||||
*
|
||||
* Input Parameters:
|
||||
* priv - Device-specific state data
|
||||
*
|
||||
* Returned Value:
|
||||
* Status register mode bits
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static uint32 spi_waitspif(struct imx_spidev_s *priv)
|
||||
{
|
||||
uint32 status;
|
||||
|
||||
/* Wait for the device to be ready to accept another byte (or for an error
|
||||
* to be reported).
|
||||
*/
|
||||
#error "Missing logic"
|
||||
return status;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: spi_transfer
|
||||
*
|
||||
* Description:
|
||||
* Send one byte on SPI, return the response
|
||||
*
|
||||
* Input Parameters:
|
||||
* priv - Device-specific state data
|
||||
* ch - the byte to send
|
||||
*
|
||||
* Returned Value:
|
||||
* response
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static ubyte spi_transfer(struct imx_spidev_s *priv, ubyte ch)
|
||||
{
|
||||
ubyte status;
|
||||
|
||||
/* Send the byte, repeating if some error occurs */
|
||||
|
||||
for(;;)
|
||||
{
|
||||
#error "Missing logic"
|
||||
|
||||
/* Wait for the device to be ready to accept another byte */
|
||||
|
||||
status = spi_waitspif(oriv);
|
||||
|
||||
/* Return the next byte from the Rx FIFO */
|
||||
#error "Missing logic"
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: spi_setfrequency
|
||||
*
|
||||
* Description:
|
||||
* Set the SPI frequency.
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* frequency - The SPI frequency requested
|
||||
*
|
||||
* Returned Value:
|
||||
* Returns the actual frequency selected
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static uint32 spi_setfrequency(FAR struct spi_dev_s *dev, uint32 frequency)
|
||||
{
|
||||
struct imx_spidev_s *priv = (struct imx_spidev_s *)dev;
|
||||
#error "Missing logic"
|
||||
return frequency;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: spi_setmode
|
||||
*
|
||||
* Description:
|
||||
* Set the SPI mode. Optional. See enum spi_mode_e for mode definitions
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* mode - The SPI mode requested
|
||||
*
|
||||
* Returned Value:
|
||||
* none
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static void spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode)
|
||||
{
|
||||
struct imx_spidev_s *priv = (struct imx_spidev_s *)dev;
|
||||
uint32 modebits;
|
||||
ubyte regval;
|
||||
|
||||
/* Select the CTL register bits based on the selected mode */
|
||||
|
||||
switch (mode)
|
||||
{
|
||||
case SPIDEV_MODE0: /* CPOL=0 CHPHA=0 */
|
||||
#error "Missing logic"
|
||||
break;
|
||||
|
||||
case SPIDEV_MODE1: /* CPOL=0 CHPHA=1 */
|
||||
#error "Missing logic"
|
||||
break;
|
||||
|
||||
case SPIDEV_MODE2: /* CPOL=1 CHPHA=0 */
|
||||
#error "Missing logic"
|
||||
break;
|
||||
|
||||
case SPIDEV_MODE3: /* CPOL=1 CHPHA=1 */
|
||||
#error "Missing logic"
|
||||
break;
|
||||
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
/* Then set the selected mode */
|
||||
#error "Missing logic"
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: spi_sndbyte
|
||||
*
|
||||
* Description:
|
||||
* Send one byte on SPI
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* ch - The byte to send
|
||||
*
|
||||
* Returned Value:
|
||||
* response
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static ubyte spi_sndbyte(FAR struct spi_dev_s *dev, ubyte ch)
|
||||
{
|
||||
struct imx_spidev_s *priv = (struct imx_spidev_s *)dev;
|
||||
return spi_transfer(priv, ch);
|
||||
}
|
||||
|
||||
/*************************************************************************
|
||||
* Name: spi_sndblock
|
||||
*
|
||||
* Description:
|
||||
* Send a block of data on SPI
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* buffer - A pointer to the buffer of data to be sent
|
||||
* buflen - the length of data to send from the buffer
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static void spi_sndblock(FAR struct spi_dev_s *dev, FAR const ubyte *buffer, size_t buflen)
|
||||
{
|
||||
struct imx_spidev_s *priv = (struct imx_spidev_s *)dev;
|
||||
uint32 response;
|
||||
|
||||
/* Loop while thre are bytes remaining to be sent */
|
||||
|
||||
while (buflen-- > 0)
|
||||
{
|
||||
response = spi_transfer(priv, *buffer++);
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: spi_recvblock
|
||||
*
|
||||
* Description:
|
||||
* Revice a block of data from SPI
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* buffer - A pointer to the buffer in which to recieve data
|
||||
* buflen - the length of data that can be received in the buffer
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static void spi_recvblock(FAR struct spi_dev_s *dev, FAR ubyte *buffer, size_t buflen)
|
||||
{
|
||||
struct imx_spidev_s *priv = (struct imx_spidev_s *)dev;
|
||||
|
||||
/* Loop while thre are bytes remaining to be sent */
|
||||
|
||||
while (buflen-- > 0)
|
||||
{
|
||||
*buffer = (ubyte)spi_transfer(prive, 0xff);
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Initialize common parts the selected SPI port. Initialization of
|
||||
* chip select GPIOs must have been performed by board specific logic
|
||||
* prior to calling this function. Specifically: GPIOs should have
|
||||
* been configured for output, and all chip selects disabled.
|
||||
*
|
||||
* One GPIO, SS (PB2 on the eZ8F091) is reserved as a chip select. However,
|
||||
* If multiple devices on on the bus, then multiple chip selects will be
|
||||
* required. Theregore, all GPIO chip management is deferred to board-
|
||||
* specific logic.
|
||||
*
|
||||
* Input Parameter:
|
||||
* Port number (for hardware that has mutiple SPI interfaces)
|
||||
*
|
||||
* Returned Value:
|
||||
* Valid SPI device structre reference on succcess; a NULL on failure
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
FAR struct spi_dev_s *up_spiinitialize(int port)
|
||||
{
|
||||
struct imx_spidev_s *priv;
|
||||
ubyte regval;
|
||||
|
||||
/* Only the SPI1 interface is supported */
|
||||
|
||||
switch (port)
|
||||
{
|
||||
#ifndef CONFIG_SPI1_DISABLE
|
||||
case 1:
|
||||
/* Select SPI1 */
|
||||
|
||||
priv = &g_spidev[SPI1_NDX];
|
||||
|
||||
/* Configure SPI1 GPIOs */
|
||||
#error "Missing logic"
|
||||
break;
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_SPI2_DISABLE
|
||||
case 2:
|
||||
/* Select SPI1 */
|
||||
|
||||
priv = &g_spidev[SPI2_NDX];
|
||||
|
||||
/* Configure SPI1 GPIOs */
|
||||
#error "Missing logic"
|
||||
break;
|
||||
#endif
|
||||
|
||||
default:
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/* Disable SPI */
|
||||
#error "Missing logic"
|
||||
|
||||
/* Set the initial clock frequency for indentification mode < 400kHz */
|
||||
|
||||
spi_setfrequency((FAR struct spi_dev_s *)priv, 400000);
|
||||
|
||||
/* Enable the SPI.
|
||||
* NOTE 1: Interrupts are not used in this driver version.
|
||||
* NOTE 2: Initial mode is mode=0.
|
||||
*/
|
||||
|
||||
#error "Missing logic"
|
||||
return (FAR struct spi_dev_s *)priv;
|
||||
}
|
||||
|
||||
#endife /* NSPIS > 0 */
|
||||
@ -86,7 +86,7 @@ static const struct spi_ops_s g_spiops =
|
||||
spi_recvblock,
|
||||
};
|
||||
|
||||
/* This supports is only a single SPI bus/port. There you port this to an
|
||||
/* This supports is only a single SPI bus/port. If you port this to an
|
||||
* architecture with multiple SPI busses/ports, then the following must
|
||||
* become an array with one 'struct spi_dev_s' instance per bus.
|
||||
*/
|
||||
|
||||
@ -60,7 +60,7 @@
|
||||
* No bit definitions -- These two 8-bit registers set the 16-bit BRG divider value
|
||||
*/
|
||||
|
||||
/*SPI Control (CTL} Register Definitions */
|
||||
/* SPI Control (CTL} Register Definitions */
|
||||
|
||||
#define SPI_CTL_IRQEN (1 << 7) /* Bit 7: 1=SPI system interrupt is enabled */
|
||||
#define SPI_CTL_SPIEN (1 << 5) /* Bit 5: 1=SPI is enabled */
|
||||
@ -109,8 +109,8 @@ extern "C" {
|
||||
* GPIOs in the way your board is configured.
|
||||
* 2. Add a call to up_spiinitialize() in your low level initialization logic
|
||||
* 3. The handle returned by up_spiinitialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling mmcsd_spislotinitializ()
|
||||
* will bind the SPI driver to the SPI MMC/SD driver.
|
||||
* SPI driver to higher level logic (e.g., calling mmcsd_spislotinitialize(),
|
||||
* for example, will bind the SPI driver to the SPI MMC/SD driver).
|
||||
*/
|
||||
|
||||
EXTERN void ez80_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, boolean selected);
|
||||
|
||||
@ -74,7 +74,7 @@ CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
|
||||
#
|
||||
# IMX specific device driver settings
|
||||
# IMX specific serial device driver settings
|
||||
#
|
||||
# CONFIG_UARTn_DISABLE - select to disable all support for
|
||||
# the UART
|
||||
@ -114,6 +114,14 @@ CONFIG_UART1_2STOP=0
|
||||
CONFIG_UART2_2STOP=0
|
||||
CONFIG_UART3_2STOP=0
|
||||
|
||||
#
|
||||
# IMX specific SPI device driver settings
|
||||
#
|
||||
# CONFIG_SPIn_DISABLE - select to disable all support for
|
||||
# the SPI
|
||||
CONFIG_SPI1_DISABLE=n
|
||||
CONFIG_SPI2_DISABLE=y
|
||||
|
||||
#
|
||||
# General build options
|
||||
#
|
||||
|
||||
Loading…
Reference in New Issue
Block a user