i.MX6: Add UART header file
This commit is contained in:
Gregory Nutt
parent
c404eae718
commit
bff9eaab1e
@ -33,8 +33,8 @@
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_IMX_UART_H
|
||||
#define __ARCH_ARM_IMX_UART_H
|
||||
#ifndef __ARCH_ARM_SRC_IMX1_CHIP_IMX_UART_H
|
||||
#define __ARCH_ARM_SRC_IMX1_CHIP_IMX_UART_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
@ -224,4 +224,4 @@
|
||||
* Inline Functions
|
||||
************************************************************************************/
|
||||
|
||||
#endif /* __ARCH_ARM_IMX_UART_H */
|
||||
#endif /* __ARCH_ARM_SRC_IMX1_CHIP_IMX_UART_H */
|
||||
|
||||
@ -47,12 +47,12 @@ config IMX6_UART3
|
||||
config IMX6_UART4
|
||||
bool "UART4"
|
||||
default n
|
||||
select ARCH_HAVE_UART3
|
||||
select ARCH_HAVE_UART4
|
||||
|
||||
config IMX6_UART5
|
||||
bool "UART5"
|
||||
default n
|
||||
select ARCH_HAVE_UART3
|
||||
select ARCH_HAVE_UART5
|
||||
|
||||
config IMX6_SPI1
|
||||
bool "SPI1"
|
||||
|
||||
363
arch/arm/src/imx6/chip/imx_uart.h
Normal file
363
arch/arm/src/imx6/chip/imx_uart.h
Normal file
@ -0,0 +1,363 @@
|
||||
/************************************************************************************
|
||||
* arch/arm/src/imx6/imx_uart.h
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_SRC_IMX6_CHIP_IMX_UART_H
|
||||
#define __ARCH_ARM_SRC_IMX6_CHIP_IMX_UART_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <chip/imx_memorymap.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* UART Register Offsets ************************************************************/
|
||||
|
||||
#define UART_RXD_OFFSET 0x0000 /* UART receiver register */
|
||||
#define UART_TXD_OFFSET 0x0040 /* UART receiver register */
|
||||
#define UART_UCR1_OFFSET 0x0080 /* UART control register 1 */
|
||||
#define UART_UCR2_OFFSET 0x0084 /* UART control register 2 */
|
||||
#define UART_UCR3_OFFSET 0x0088 /* UART control register 3 */
|
||||
#define UART_UCR4_OFFSET 0x008c /* UART control register 4 */
|
||||
#define UART_UFCR_OFFSET 0x0090 /* UART FIFO control register */
|
||||
#define UART_USR1_OFFSET 0x0094 /* UART status register 1 */
|
||||
#define UART_USR2_OFFSET 0x0098 /* UART status register 2 */
|
||||
#define UART_UESC_OFFSET 0x009c /* UART escape character register */
|
||||
#define UART_UTIM_OFFSET 0x00a0 /* UART escape timer register */
|
||||
#define UART_UBIR_OFFSET 0x00a4 /* UART BRM incremental register */
|
||||
#define UART_UBMR_OFFSET 0x00a8 /* UART BRM modulator register */
|
||||
#define UART_UBRC_OFFSET 0x00ac /* UART baud rate counter register */
|
||||
#define UART_ONEMS_OFFSET 0x00b0 /* UART One Millisecond Register */
|
||||
#define UART_UTS_OFFSET 0x00b4 /* UART test register */
|
||||
#define UART_UMCR_OFFSET 0x00b8 /* UART RS-485 Mode Control Register */
|
||||
|
||||
/* UART Register Addresses **********************************************************/
|
||||
|
||||
#define UART1_RXD (IMX_UART1_VBASE+UART_RXD_OFFSET)
|
||||
#define UART1_TXD (IMX_UART1_VBASE+UART_TXD_OFFSET)
|
||||
#define UART1_UCR1 (IMX_UART1_VBASE+UART_UCR1_OFFSET)
|
||||
#define UART1_UCR2 (IMX_UART1_VBASE+UART_UCR2_OFFSET)
|
||||
#define UART1_UCR3 (IMX_UART1_VBASE+UART_UCR3_OFFSET)
|
||||
#define UART1_UCR4 (IMX_UART1_VBASE+UART_UCR4_OFFSET)
|
||||
#define UART1_UFCR (IMX_UART1_VBASE+UART_UFCR_OFFSET)
|
||||
#define UART1_USR1 (IMX_UART1_VBASE+UART_USR1_OFFSET)
|
||||
#define UART1_USR2 (IMX_UART1_VBASE+UART_USR2_OFFSET)
|
||||
#define UART1_UESC (IMX_UART1_VBASE+UART_UESC_OFFSET)
|
||||
#define UART1_UTIM (IMX_UART1_VBASE+UART_UTIM_OFFSET)
|
||||
#define UART1_UBIR (IMX_UART1_VBASE+UART_UBIR_OFFSET)
|
||||
#define UART1_UBMR (IMX_UART1_VBASE+UART_UBMR_OFFSET)
|
||||
#define UART1_UBRC (IMX_UART1_VBASE+UART_UBRC_OFFSET)
|
||||
#define UART1_ONEMS (IMX_UART1_VBASE+UART_ONEMS_OFFSET)
|
||||
#define UART1_UTS (IMX_UART1_VBASE+UART_UTS_OFFSET)
|
||||
#define UART1_UMCR (IMX_UART1_VBASE+UART_UMCR_OFFSET)
|
||||
|
||||
#define UART2_RXD (IMX_UART2_VBASE+UART_RXD_OFFSET)
|
||||
#define UART2_TXD (IMX_UART2_VBASE+UART_TXD_OFFSET)
|
||||
#define UART2_UCR1 (IMX_UART2_VBASE+UART_UCR1_OFFSET)
|
||||
#define UART2_UCR2 (IMX_UART2_VBASE+UART_UCR2_OFFSET)
|
||||
#define UART2_UCR3 (IMX_UART2_VBASE+UART_UCR3_OFFSET)
|
||||
#define UART2_UCR4 (IMX_UART2_VBASE+UART_UCR4_OFFSET)
|
||||
#define UART2_UFCR (IMX_UART2_VBASE+UART_UFCR_OFFSET)
|
||||
#define UART2_USR1 (IMX_UART2_VBASE+UART_USR1_OFFSET)
|
||||
#define UART2_USR2 (IMX_UART2_VBASE+UART_USR2_OFFSET)
|
||||
#define UART2_UESC (IMX_UART2_VBASE+UART_UESC_OFFSET)
|
||||
#define UART2_UTIM (IMX_UART2_VBASE+UART_UTIM_OFFSET)
|
||||
#define UART2_UBIR (IMX_UART2_VBASE+UART_UBIR_OFFSET)
|
||||
#define UART2_UBMR (IMX_UART2_VBASE+UART_UBMR_OFFSET)
|
||||
#define UART2_UBRC (IMX_UART2_VBASE+UART_UBRC_OFFSET)
|
||||
#define UART2_ONEMS (IMX_UART2_VBASE+UART_ONEMS_OFFSET)
|
||||
#define UART2_UTS (IMX_UART2_VBASE+UART_UTS_OFFSET)
|
||||
#define UART2_UMCR (IMX_UART2_VBASE+UART_UMCR_OFFSET)
|
||||
|
||||
#define UART3_RXD (IMX_UART3_VBASE+UART_RXD_OFFSET)
|
||||
#define UART3_TXD (IMX_UART3_VBASE+UART_TXD_OFFSET)
|
||||
#define UART3_UCR1 (IMX_UART3_VBASE+UART_UCR1_OFFSET)
|
||||
#define UART3_UCR2 (IMX_UART3_VBASE+UART_UCR2_OFFSET)
|
||||
#define UART3_UCR3 (IMX_UART3_VBASE+UART_UCR3_OFFSET)
|
||||
#define UART3_UCR4 (IMX_UART3_VBASE+UART_UCR4_OFFSET)
|
||||
#define UART3_UFCR (IMX_UART3_VBASE+UART_UFCR_OFFSET)
|
||||
#define UART3_USR1 (IMX_UART3_VBASE+UART_USR1_OFFSET)
|
||||
#define UART3_USR2 (IMX_UART3_VBASE+UART_USR2_OFFSET)
|
||||
#define UART3_UESC (IMX_UART3_VBASE+UART_UESC_OFFSET)
|
||||
#define UART3_UTIM (IMX_UART3_VBASE+UART_UTIM_OFFSET)
|
||||
#define UART3_UBIR (IMX_UART3_VBASE+UART_UBIR_OFFSET)
|
||||
#define UART3_UBMR (IMX_UART3_VBASE+UART_UBMR_OFFSET)
|
||||
#define UART3_UBRC (IMX_UART3_VBASE+UART_UBRC_OFFSET)
|
||||
#define UART3_ONEMS (IMX_UART3_VBASE+UART_ONEMS_OFFSET)
|
||||
#define UART3_UTS (IMX_UART3_VBASE+UART_UTS_OFFSET)
|
||||
#define UART3_UMCR (IMX_UART3_VBASE+UART_UMCR_OFFSET)
|
||||
|
||||
#define UART4_RXD (IMX_UART4_VBASE+UART_RXD_OFFSET)
|
||||
#define UART4_TXD (IMX_UART4_VBASE+UART_TXD_OFFSET)
|
||||
#define UART4_UCR1 (IMX_UART4_VBASE+UART_UCR1_OFFSET)
|
||||
#define UART4_UCR2 (IMX_UART4_VBASE+UART_UCR2_OFFSET)
|
||||
#define UART4_UCR3 (IMX_UART4_VBASE+UART_UCR3_OFFSET)
|
||||
#define UART4_UCR4 (IMX_UART4_VBASE+UART_UCR4_OFFSET)
|
||||
#define UART4_UFCR (IMX_UART4_VBASE+UART_UFCR_OFFSET)
|
||||
#define UART4_USR1 (IMX_UART4_VBASE+UART_USR1_OFFSET)
|
||||
#define UART4_USR2 (IMX_UART4_VBASE+UART_USR2_OFFSET)
|
||||
#define UART4_UESC (IMX_UART4_VBASE+UART_UESC_OFFSET)
|
||||
#define UART4_UTIM (IMX_UART4_VBASE+UART_UTIM_OFFSET)
|
||||
#define UART4_UBIR (IMX_UART4_VBASE+UART_UBIR_OFFSET)
|
||||
#define UART4_UBMR (IMX_UART4_VBASE+UART_UBMR_OFFSET)
|
||||
#define UART4_UBRC (IMX_UART4_VBASE+UART_UBRC_OFFSET)
|
||||
#define UART4_ONEMS (IMX_UART4_VBASE+UART_ONEMS_OFFSET)
|
||||
#define UART4_UTS (IMX_UART4_VBASE+UART_UTS_OFFSET)
|
||||
#define UART4_UMCR (IMX_UART4_VBASE+UART_UMCR_OFFSET)
|
||||
|
||||
#define UART5_RXD (IMX_UART5_VBASE+UART_RXD_OFFSET)
|
||||
#define UART5_TXD (IMX_UART5_VBASE+UART_TXD_OFFSET)
|
||||
#define UART5_UCR1 (IMX_UART5_VBASE+UART_UCR1_OFFSET)
|
||||
#define UART5_UCR2 (IMX_UART5_VBASE+UART_UCR2_OFFSET)
|
||||
#define UART5_UCR3 (IMX_UART5_VBASE+UART_UCR3_OFFSET)
|
||||
#define UART5_UCR4 (IMX_UART5_VBASE+UART_UCR4_OFFSET)
|
||||
#define UART5_UFCR (IMX_UART5_VBASE+UART_UFCR_OFFSET)
|
||||
#define UART5_USR1 (IMX_UART5_VBASE+UART_USR1_OFFSET)
|
||||
#define UART5_USR2 (IMX_UART5_VBASE+UART_USR2_OFFSET)
|
||||
#define UART5_UESC (IMX_UART5_VBASE+UART_UESC_OFFSET)
|
||||
#define UART5_UTIM (IMX_UART5_VBASE+UART_UTIM_OFFSET)
|
||||
#define UART5_UBIR (IMX_UART5_VBASE+UART_UBIR_OFFSET)
|
||||
#define UART5_UBMR (IMX_UART5_VBASE+UART_UBMR_OFFSET)
|
||||
#define UART5_UBRC (IMX_UART5_VBASE+UART_UBRC_OFFSET)
|
||||
#define UART5_ONEMS (IMX_UART5_VBASE+UART_ONEMS_OFFSET)
|
||||
#define UART5_UTS (IMX_UART5_VBASE+UART_UTS_OFFSET)
|
||||
#define UART5_UMCR (IMX_UART5_VBASE+UART_UMCR_OFFSET)
|
||||
|
||||
/* UART Register Bit Definitions ****************************************************/
|
||||
|
||||
/* UART Receiver Register */
|
||||
|
||||
#define UART_RXD_DATA_SHIFT 0 /* Bits 0-7: Received Data */
|
||||
#define UART_RXD_DATA_MASK (0xff << UART_RXD_DATA_SHIFT)
|
||||
#define UART_RXD_PRERR (1 << 10) /* Bit 10: Parity Error */
|
||||
#define UART_RXD_BRK (1 << 11) /* Bit 11: Break Detect */
|
||||
#define UART_RXD_FRMERR (1 << 12) /* Bit 12: Frame Error */
|
||||
#define UART_RXD_OVRRUN (1 << 13) /* Bit 13: Receiver Overrun */
|
||||
#define UART_RXD_ERR (1 << 14) /* Bit 14: Error Detect */
|
||||
#define UART_RXD_CHARRDY (1 << 15) /* Bit 15: Character Ready */
|
||||
|
||||
/* UART Transmitter Register */
|
||||
|
||||
#define UART_TXDATA_SHIFT 0 /* Bits 0-7: Transmit Data */
|
||||
#define UART_TXDATA_MASK (0xff << UART_UCR4_TXDATA_SHIFT)
|
||||
|
||||
/* UART Control Register 1 */
|
||||
|
||||
#define UART_UCR1_UARTEN (1 << 0) /* Bit 0: Enable/disable uart */
|
||||
#define UART_UCR1_DOZE (1 << 1) /* Bit 1: UART Doze enable */
|
||||
#define UART_UCR1_ATDMAEN (1 << 2) /* Bit 2: Aging DMA Timer Enable */
|
||||
#define UART_UCR1_TXDMAEN (1 << 3) /* Bit 3: Transmitter Ready DMA Enable */
|
||||
#define UART_UCR1_SNDBRK (1 << 4) /* Bit 4: Send BREAK */
|
||||
#define UART_UCR1_RTSDEN (1 << 5) /* Bit 5: RTS Delta interrupt enable */
|
||||
#define UART_UCR1_TXEMPTYEN (1 << 6) /* Bit 6: Transmitter empty interrupt enable */
|
||||
#define UART_UCR1_IREN (1 << 7) /* Bit 7: Infrared Interface enable */
|
||||
#define UART_UCR1_RDMAEN (1 << 8) /* Bit 8: Receive ready DMA enable */
|
||||
#define UART_UCR1_RRDYEN (1 << 9) /* Bit 9: Receiver ready interrupt enable */
|
||||
#define UART_UCR1_ICD_SHIFT 10 /* Bit 10-11: Idle condition detect */
|
||||
#define UART_UCR1_ICD_MASK (3 << UART_UCR1_ICD_SHIFT)
|
||||
# define UART_UCR1_ICD_4FRMS (0 << UART_UCR1_ICD_SHIFT) /* Idle for more than 4 frames */
|
||||
# define UART_UCR1_ICD_8FRMS (1 << UART_UCR1_ICD_SHIFT) /* Idle for more than 8 frames */
|
||||
# define UART_UCR1_ICD_16FRMS (2 << UART_UCR1_ICD_SHIFT) /* Idle for more than 16 frames */
|
||||
# define UART_UCR1_ICD_32FRMS (3 << UART_UCR1_ICD_SHIFT) /* Idle for more than 32 frames */
|
||||
#define UART_UCR1_IDEN (1 << 12) /* Bit 12: Idle condition detected interrupt enable */
|
||||
#define UART_UCR1_TRDYEN (1 << 13) /* Bit 13: Transmitter ready interrupt enable */
|
||||
#define UART_UCR1_ADBR (1 << 14) /* Bit 14: Automatic detection of baud rate */
|
||||
#define UART_UCR1_ADEN (1 << 15) /* Bit 15: Automatic baud rate detection interrupt enable */
|
||||
|
||||
/* UART Control Register 2 */
|
||||
|
||||
#define UART_UCR2_SRST (1 << 0) /* Bit 0: Software reset */
|
||||
#define UART_UCR2_RXEN (1 << 1) /* Bit 1: Receiver enable */
|
||||
#define UART_UCR2_TXEN (1 << 2) /* Bit 2: Transmitter enable */
|
||||
#define UART_UCR2_ATEN (1 << 3) /* Bit 2: Aging Timer Enable */
|
||||
#define UART_UCR2_RTSEN (1 << 4) /* Bit 4: RTS interrupt enable/disable */
|
||||
#define UART_UCR2_WS (1 << 5) /* Bit 5: Word size */
|
||||
#define UART_UCR2_STPB (1 << 6) /* Bit 6: Controls number of stop bits */
|
||||
#define UART_UCR2_PROE (1 << 7) /* Bit 7: Parity Odd/Even */
|
||||
#define UART_UCR2_PREN (1 << 8) /* Bit 8: Parity enable */
|
||||
#define UART_UCR2_RTEC_SHIFT 9 /* Bit 9-10: Request to send edge control */
|
||||
#define UART_UCR2_RTEC_MASK (3 << UART_UCR2_RTEC_SHIFT)
|
||||
# define UART_UCR2_RTEC_RISE (0 << UART_UCR2_RTEC_SHIFT) /* Interrupt on rising edge */
|
||||
# define UART_UCR2_RTEC_FALL (1 << UART_UCR2_RTEC_SHIFT) /* Interrupt on falling edge */
|
||||
# define UART_UCR2_RTEC_BOTH (2 << UART_UCR2_RTEC_SHIFT) /* Interrupt on any edge */
|
||||
#define UART_UCR2_ESCEN (1 << 11) /* Bit 11: Escape enable */
|
||||
#define UART_UCR2_CTS (1 << 12) /* Bit 12: Clear To Send pin */
|
||||
#define UART_UCR2_CTSC (1 << 13) /* Bit 13: CTS Pin control */
|
||||
#define UART_UCR2_IRTS (1 << 14) /* Bit 14: Ignore RTS Pin */
|
||||
#define UART_UCR2_ESCI (1 << 15) /* Bit 15: Escape Sequence Interrupt Enable */
|
||||
|
||||
/* UART Control Register 3 */
|
||||
|
||||
#define UART_UCR3_ACIEN (1 << 0) /* Bit 0: Autobaud Counter Interrupt Enable */
|
||||
#define UART_UCR3_INVT (1 << 1) /* Bit 1: Inverted output */
|
||||
#define UART_UCR3_RXDMUXSEL (1 << 2) /* Bit 2: RXD muxed input selected */
|
||||
#define UART_UCR3_DTRDEN (1 << 3) /* Bit 3: Data Terminal Ready delta enable */
|
||||
#define UART_UCR3_AWAKEN (1 << 4) /* Bit 4: Asynchronous wake interrupt enable */
|
||||
#define UART_UCR3_AIRINTEN (1 << 5) /* Bit 5: Asynchronous IR Wake interrupt enable */
|
||||
#define UART_UCR3_RXDSEN (1 << 6) /* Bit 6: Receive status interrupt enable */
|
||||
#define UART_UCR3_ADNIMP (1 << 7) /* Bit 7: Autobaud Detection Not Improved */
|
||||
#define UART_UCR3_RI (1 << 8) /* Bit 8: Ring Indicator */
|
||||
#define UART_UCR3_DCD (1 << 9) /* Bit 9: Data Carrier Detect */
|
||||
#define UART_UCR3_DSR (1 << 10) /* Bit 10: Data Set Ready */
|
||||
#define UART_UCR3_FRAERREN (1 << 11) /* Bit 11: Frame error interrupt enable */
|
||||
#define UART_UCR3_PARERREN (1 << 12) /* Bit 12: Parity error interrupt enable */
|
||||
#define UART_UCR3_DTREN (1 << 13) /* Bit 13: Data Terminal Ready interrupt enable */
|
||||
#define UART_UCR3_DPEC_SHIFT (14) /* Bits 14-15: DTR/DSR interrupt edge control */
|
||||
#define UART_UCR3_DPEC_MASK (3 << UART_UCR3_DPEC_SHIFT)
|
||||
# define UART1_DPEC_RISING (0 << UART_UCR3_DPEC_SHIFT) /* Interrupt on rising edge */
|
||||
# define UART1_DPEC_FALLING (1 << UART_UCR3_DPEC_SHIFT) /* Interrupt on falling edge */
|
||||
# define UART1_DPEC_BOTH (2 << UART_UCR3_DPEC_SHIFT) /* Interrupt on either edge */
|
||||
|
||||
/* UART Control Register 4 */
|
||||
|
||||
#define UART_UCR4_DREN (1 << 0) /* Bit 0: Receive data ready interrupt enable */
|
||||
#define UART_UCR4_OREN (1 << 1) /* Bit 1: Receiver overrun interrupt enable */
|
||||
#define UART_UCR4_BKEN (1 << 2) /* Bit 2: Break condition detected interrupt enable */
|
||||
#define UART_UCR4_TCEN (1 << 3) /* Bit 3: Transmit complete interrupt enable */
|
||||
#define UART_UCR4_LPBYP (1 << 4) /* Bit 4: Low Power B */
|
||||
#define UART_UCR4_IRSC (1 << 5) /* Bit 5: IR special case */
|
||||
#define UART_UCR4_IDDMAEN (1 << 6) /* Bit 6: DMA IDLE Condition Detected interrupt enable */
|
||||
#define UART_UCR4_WKEN (1 << 7) /* Bit 7: Wake interrupt enable */
|
||||
#define UART_UCR4_ENIRI (1 << 8) /* Bit 8: Serial infrared interrupt enable */
|
||||
#define UART_UCR4_INVR (1 << 9) /* Bit 9: Inverted reception */
|
||||
#define UART_UCR4_CTSTL_SHIFT 10 /* Bits 10-15: CTS trigger level */
|
||||
#define UART_UCR4_CTSTL_MASK (0x3f << UART_UCR4_CTSTL_SHIFT)
|
||||
# define UART_UCR4_CTSTL(n) ((uint32_t)(n) << UART_UCR4_CTSTL_SHIFT)
|
||||
|
||||
/* UART FIFO Control Register */
|
||||
|
||||
#define UART_UFCR_RXTL_SHIFT 0 /* Bits 0-6: Receiver Trigger Level */
|
||||
#define UART_UFCR_RXTL_MASK (0x3f << UART_UFCR_RXTL_SHIFT)
|
||||
# define UART_UFCR_RXTL(n) ((uint32_t)(n) << UART_UFCR_RXTL_SHIFT)
|
||||
#define UART_UFCR_RFDIV_SHIFT 7 /* Bits 7-9: Reference Frequency Divider */
|
||||
#define UART_UFCR_RFDIV_MASK (7 << UART_UFCR_RFDIV_SHIFT)
|
||||
# define UART_UFCR_RFDIV6 (0 << UART_UFCR_RFDIV_SHIFT) /* Divide input clock by 6 */
|
||||
# define UART_UFCR_RFDIV5 (1 << UART_UFCR_RFDIV_SHIFT) /* Divide input clock by 5 */
|
||||
# define UART_UFCR_RFDIV4 (2 << UART_UFCR_RFDIV_SHIFT) /* Divide input clock by 4 */
|
||||
# define UART_UFCR_RFDIV3 (3 << UART_UFCR_RFDIV_SHIFT) /* Divide input clock by 3 */
|
||||
# define UART_UFCR_RFDIV2 (4 << UART_UFCR_RFDIV_SHIFT) /* Divide input clock by 2 */
|
||||
# define UART_UFCR_RFDIV1 (5 << UART_UFCR_RFDIV_SHIFT) /* Divide input clock by 1 */
|
||||
# define UART_UFCR_RFDIV7 (6 << UART_UFCR_RFDIV_SHIFT) /* Divide input clock by 7 */
|
||||
#define UART_UFCR_TXTL_SHIFT 10 /* Bits 10-15: Transmitter Trigger Level */
|
||||
#define UART_UFCR_TXTL_MASK (0x3f << UART_UFCR_TXTL_SHIFT)
|
||||
# define UART_UFCR_TXTL(n) ((uint32_t)(n) << UART_UFCR_TXTL_SHIFT)
|
||||
|
||||
/* UART Status 1 Register */
|
||||
|
||||
#define UART_USR1_SAD (1 << 3) /* Bit 3: RS-485 Slave Address Detected Interrupt Flag */
|
||||
#define UART_USR1_AWAKE (1 << 4) /* Bit 4: Asynchronous WAKE Interrupt Flag */
|
||||
#define UART_USR1_AIRINT (1 << 5) /* Bit 5: Asynchronous IR WAKE Interrupt Flag */
|
||||
#define UART_USR1_RXDS (1 << 6) /* Bit 6: Receiver IDLE Interrupt Flag */
|
||||
#define UART_USR1_DTRD (1 << 7) /* Bit 7: DTR Delta */
|
||||
#define UART_USR1_AGTIM (1 << 8) /* Bit 8: Aging Timer Interrupt Flag */
|
||||
#define UART_USR1_RRDY (1 << 9) /* Bit 9: RX Ready Interrupt/DMA Flag */
|
||||
#define UART_USR1_FRAMERR (1 << 10) /* Bit 10: Frame Error Interrupt Flag */
|
||||
#define UART_USR1_ESCF (1 << 11) /* Bit 11: Escape Sequence Interrupt Flag */
|
||||
#define UART_USR1_RTSD (1 << 12) /* Bit 12: RTS Delta */
|
||||
#define UART_USR1_TRDY (1 << 13) /* Bit 13: TX Ready Interrupt/DMA Flag */
|
||||
#define UART_USR1_RTSS (1 << 14) /* Bit 14: RTS_B Pin Status */
|
||||
#define UART_USR1_PARITYERR (1 << 15) /* Bit 15: Parity Error Interrupt Flag */
|
||||
|
||||
/* UART Status 2 Register */
|
||||
|
||||
#define UART_USR2_RDR (1 << 0) /* Bit 0: Receive data ready */
|
||||
#define UART_USR2_ORE (1 << 1) /* Bit 1: Overrun error */
|
||||
#define UART_USR2_BRCD (1 << 2) /* Bit 2: Break condition detected */
|
||||
#define UART_USR2_TXDC (1 << 3) /* Bit 3: Transmitter complete */
|
||||
#define UART_USR2_RTSF (1 << 4) /* Bit 4: RTS Edge Triggered Interrupt flag */
|
||||
#define UART_USR2_DCDIN (1 << 5) /* Bit 5: Data Carrier Detect Input */
|
||||
#define UART_USR2_DCDDELT (1 << 6) /* Bit 6: Data Carrier Detect Delta */
|
||||
#define UART_USR2_WAKE (1 << 7) /* Bit 7: Wake */
|
||||
#define UART_USR2_IRINT (1 << 8) /* Bit 8: Serial infrared interrupt flag */
|
||||
#define UART_USR2_RIIN (1 << 9) /* Bit 9: Ring Indicator Input */
|
||||
#define UART_USR2_RIDELT (1 << 10) /* Bit 10: Ring Indicator */
|
||||
#define UART_USR2_ACST (1 << 11) /* Bit 11: Autobaud Counter Stopped */
|
||||
#define UART_USR2_IDLE (1 << 12) /* Bit 12: Idle condition */
|
||||
#define UART_USR2_DTRF (1 << 13) /* Bit 13: DTR edge triggered interrupt flag */
|
||||
#define UART_USR2_TXFE (1 << 14) /* Bit 14: Transmit Buffer FIFO empty */
|
||||
#define UART_USR2_ADET (1 << 15) /* Bit 15: Automatic baud rate detection complete */
|
||||
|
||||
/* UART Escape Character Register */
|
||||
|
||||
#define UART_UESC_MASK 0xff /* Bits 0-7: UART Escape Character */
|
||||
|
||||
/* UART Escape Timer Register */
|
||||
|
||||
#define UART_UTIM_MASK 0xfff /* Bits 0-11: UART Escape Timer */
|
||||
|
||||
/* UART BRM Incremental Register */
|
||||
|
||||
#define UART_UBIR_MASK 0xffff /* Bits 0-15: Incremental Numerator */
|
||||
|
||||
/* UART BRM Modulator Register */
|
||||
|
||||
#define UART_UBMR_MASK 0xffff /* Bits 0-15: Modulator Denominator */
|
||||
|
||||
/* UART Baud Rate Count Register */
|
||||
|
||||
#define UART_UBRC_MASK 0xffff /* Bits 0-15: Baud Rate Count Register */
|
||||
|
||||
/* UART One Millisecond Register */
|
||||
|
||||
#define UART_ONEMS_MASK 0xffffff /* Bits 0-23: One Millisecond Register */
|
||||
|
||||
/* UART Test Register */
|
||||
|
||||
#define UART_UTS_SOFTRST (1 << 0) /* Bit 0: Software Reset */
|
||||
#define UART_UTS_RXFULL (1 << 3) /* Bit 3: RxFIFO FULL */
|
||||
#define UART_UTS_TXFULL (1 << 4) /* Bit 4: TxFIFO FULL */
|
||||
#define UART_UTS_RXEMPTY (1 << 5) /* Bit 5: RxFIFO Empty */
|
||||
#define UART_UTS_TXEMPTY (1 << 6) /* Bit 6: TxFIFO Empty */
|
||||
#define UART_UTS_RXDBG (1 << 9) /* Bit 9: RX FIFO debug mode */
|
||||
#define UART_UTS_LOOPIR (1 << 10) /* Bit 10: Loop TX and RX for IR Test (LOOPIR)*/
|
||||
#define UART_UTS_DBGEN (1 << 11) /* Bit 11: Debug enable B */
|
||||
#define UART_UTS_LOOP (1 << 12) /* Bit 12: Loop TX and RX for Test */
|
||||
#define UART_UTS_FRCPERR (1 << 13) /* Bit 13: Force Parity Error */
|
||||
|
||||
/* UART RS-485 Mode Control Register */
|
||||
|
||||
#define UART_UMCR_MDEN (1 << 0) /* Bit 0: 9-bit data or Multidrop Mode (RS-485) Enable */
|
||||
#define UART_UMCR_SLAM (1 << 1) /* Bit 1: RS-485 Slave Address Detect Mode Selection */
|
||||
#define UART_UMCR_TXB8 (1 << 2) /* Bit 2: Transmit RS-485 bit 8 */
|
||||
#define UART_UMCR_SADEN (1 << 3) /* Bit 3: RS-485 Slave Address Detected Interrupt Enable */
|
||||
#define UART_UMCR_SLADDR_SHIFT (8) /* Bits 8-15: RS-485 Slave Address Character */
|
||||
#define UART_UMCR_SLADDR_MASK (0xff << UART_UMCR_SLADDR_SHIFT)
|
||||
# define UART_UMCR_SLADDR(n) ((uint32_t)(n) << UART_UMCR_SLADDR_SHIFT)
|
||||
|
||||
#endif /* __ARCH_ARM_SRC_IMX6_CHIP_IMX_UART_H */
|
||||
@ -108,6 +108,8 @@ static inline void imx_setupmappings(void)
|
||||
mmu_l1_map_region(&g_section_mapping[i]);
|
||||
}
|
||||
}
|
||||
#else
|
||||
# define imx_setupmappings()
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
@ -191,16 +193,12 @@ static inline size_t imx_vectorsize(void)
|
||||
* Name: imx_vectormapping
|
||||
*
|
||||
* Description:
|
||||
* Setup a special mapping for the interrupt vectors when (1) the
|
||||
* interrupt vectors are not positioned in ROM, and when (2) the interrupt
|
||||
* vectors are located at the high address, 0xffff0000. When the
|
||||
* interrupt vectors are located in ROM, we just have to assume that they
|
||||
* were set up correctly; When vectors are located in low memory,
|
||||
* 0x00000000, the mapping for the ROM memory region will be suppressed.
|
||||
* Setup a special mapping for the interrupt vectors when the interrupt
|
||||
* vectors are located at the high address, 0xffff0000.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#if !defined(CONFIG_ARCH_ROMPGTABLE) && !defined(CONFIG_ARCH_LOWVECTORS)
|
||||
#ifndef CONFIG_ARCH_LOWVECTORS
|
||||
static void imx_vectormapping(void)
|
||||
{
|
||||
uint32_t vector_paddr = IMX_VECTOR_PADDR & PTE_SMALL_PADDR_MASK;
|
||||
@ -248,7 +246,7 @@ static void imx_vectormapping(void)
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#if !defined(CONFIG_ARCH_LOWVECTORS)
|
||||
#ifndef CONFIG_ARCH_LOWVECTORS
|
||||
static void imx_copyvectorblock(void)
|
||||
{
|
||||
uint32_t *src;
|
||||
@ -406,7 +404,6 @@ void up_boot(void)
|
||||
uint32_t *dest;
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_ARCH_ROMPGTABLE
|
||||
/* __start provided the basic MMU mappings for OCRAM. Now provide mappings
|
||||
* for all IO regions (Including the vector region).
|
||||
*/
|
||||
@ -419,8 +416,6 @@ void up_boot(void)
|
||||
|
||||
imx_vectormapping();
|
||||
|
||||
#endif /* CONFIG_ARCH_ROMPGTABLE */
|
||||
|
||||
#ifdef CONFIG_ARCH_RAMFUNCS
|
||||
/* Copy any necessary code sections from FLASH to RAM. The correct
|
||||
* destination in OCRAM is given by _sramfuncs and _eramfuncs. The
|
||||
|
||||
@ -50,9 +50,9 @@
|
||||
|
||||
/* Is there a UART enabled? */
|
||||
|
||||
#if defined(CONFIG_IMX6_UART0) || defined(CONFIG_IMX6_UART1) || \
|
||||
defined(CONFIG_IMX6_UART2) || defined(CONFIG_IMX6_UART3) || \
|
||||
defined(CONFIG_IMX6_UART4)
|
||||
#if defined(CONFIG_IMX6_UART1) || defined(CONFIG_IMX6_UART2) || \
|
||||
defined(CONFIG_IMX6_UART3) || defined(CONFIG_IMX6_UART4) || \
|
||||
defined(CONFIG_IMX6_UART5)
|
||||
# define IMX6_HAVE_UART
|
||||
#endif
|
||||
|
||||
@ -61,45 +61,45 @@
|
||||
# define SUPPRESS_CONSOLE_CONFIG 1
|
||||
#endif
|
||||
|
||||
/* Is there a serial console? It could be on UART0-4 or USART0-3 */
|
||||
/* Is there a serial console? It could be on UART1-5 */
|
||||
|
||||
#if defined(CONFIG_UART0_SERIAL_CONSOLE) && defined(CONFIG_IMX6_UART0)
|
||||
# undef CONFIG_UART1_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART2_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART3_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART4_SERIAL_CONSOLE
|
||||
# define IMX6_HAVE_UART_CONSOLE 1
|
||||
#elif defined(CONFIG_UART1_SERIAL_CONSOLE) && defined(CONFIG_IMX6_UART1)
|
||||
# undef CONFIG_UART0_SERIAL_CONSOLE
|
||||
#if defined(CONFIG_UART1_SERIAL_CONSOLE) && defined(CONFIG_IMX6_UART1)
|
||||
# undef CONFIG_UART2_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART3_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART4_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART5_SERIAL_CONSOLE
|
||||
# define IMX6_HAVE_UART_CONSOLE 1
|
||||
#elif defined(CONFIG_UART2_SERIAL_CONSOLE) && defined(CONFIG_IMX6_UART2)
|
||||
# undef CONFIG_UART0_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART1_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART3_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART4_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART5_SERIAL_CONSOLE
|
||||
# define IMX6_HAVE_UART_CONSOLE 1
|
||||
#elif defined(CONFIG_UART3_SERIAL_CONSOLE) && defined(CONFIG_IMX6_UART3)
|
||||
# undef CONFIG_UART0_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART1_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART2_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART4_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART5_SERIAL_CONSOLE
|
||||
# define IMX6_HAVE_UART_CONSOLE 1
|
||||
#elif defined(CONFIG_UART4_SERIAL_CONSOLE) && defined(CONFIG_IMX6_UART4)
|
||||
# undef CONFIG_UART0_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART1_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART2_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART3_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART5_SERIAL_CONSOLE
|
||||
# define IMX6_HAVE_UART_CONSOLE 1
|
||||
#elif defined(CONFIG_UART5_SERIAL_CONSOLE) && defined(CONFIG_IMX6_UART5)
|
||||
# undef CONFIG_UART1_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART2_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART3_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART4_SERIAL_CONSOLE
|
||||
# define IMX6_HAVE_UART_CONSOLE 1
|
||||
#else
|
||||
# warning "No valid CONFIG_UARTn/USARTn_SERIAL_CONSOLE Setting"
|
||||
# undef CONFIG_UART0_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART1_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART2_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART3_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART4_SERIAL_CONSOLE
|
||||
# undef CONFIG_UART5_SERIAL_CONSOLE
|
||||
# undef IMX6_HAVE_UART_CONSOLE
|
||||
#endif
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user