Add support for UBW32 buttons

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4663 42af7a65-404d-4744-a932-0658087f49c3

configs/stm3240g-eval/nsh/appconfig

@@ -87,3 +87,12 @@ ifeq ($(CONFIG_NET),y)
 #CONFIGURED_APPS += examples/ftpc
 #CONFIGURED_APPS += examples/ftpd
 endif
+
+# Uncomment to select a graphics example
+
+ifeq ($(CONFIG_NX),y)
+#CONFIGURED_APPS += examples/nx
+#CONFIGURED_APPS += examples/nxhello
+#CONFIGURED_APPS += examples/nximage
+#CONFIGURED_APPS += examples/nxlines
+endif

configs/ubw32/README.txt

@@ -15,6 +15,7 @@ Contents
   Toolchains
   Loading NuttX with PICkit2
   LEDs
+  Buttons
   PIC32MX Configuration Options
   Configurations
 
@@ -297,6 +298,12 @@ LEDs
   LED_ASSERTION          4  N/C  N/C  ON   N/C  N/C  OFF
   LED_PANIC              5  ON   N/C  N/C  OFF  N/C  N/C
 
+Buttons
+=======
+
+    RE6 User switch
+    RE7 Program switch
+ 
 PIC32MX Configuration Options
 =============================
 

configs/ubw32/include/board.h

@@ -136,6 +136,20 @@
 
 #define LED_NVALUES            6
 
+/* The UBW32 board has three buttons.
+ *
+ * PROGRAM RE7  Pulled high, Grounded/low when depressed
+ * USER    RE6  Pulled high, Grounded/low when depressed
+ * RESET        Not software accessible
+ */
+
+#define BUTTON_PROGRAM         0
+#define BUTTON_USER            1
+#define NUM_BUTTONS            2
+
+#define BUTTON_PROGRAM_BIT     (1 << BUTTON_PROGRAM)
+#define BUTTON_USER_BIT        (1 << BUTTON_USER)
+
 /****************************************************************************
  * Public Types
  ****************************************************************************/
@@ -179,6 +193,42 @@ EXTERN void pic32mx_setled(int led, bool ledon);
 EXTERN void pic32mx_setleds(uint8_t ledset);
 #endif
 
+/****************************************************************************
+ * Button support.
+ *
+ * Description:
+ *   up_buttoninit() must be called to initialize button resources.  After
+ *   that, up_buttons() may be called to collect the current state of all
+ *   buttons or up_irqbutton() may be called to register button interrupt
+ *   handlers.
+ *
+ *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
+ *   with each bit associated with a button.  See the BUTTON_*_BIT
+ *   definitions in board.h for the meaning of each bit.
+ *
+ *   up_irqbutton() may be called to register an interrupt handler that will
+ *   be called when a button is depressed or released.  The ID value is a
+ *   button enumeration value that uniquely identifies a button resource.
+ *   See the BUTTON_* definitions in board.h for the meaning of enumeration
+ *   value.  The previous interrupt handler address is returned (so that it
+ *   may restored, if so desired).
+ *
+ *   When an interrupt occurs, it is due to a change on the GPIO input pin
+ *   associated with the button.  In that case, all attached change
+ *   notification handlers will be called.  Each handler must maintain state
+ *   and determine if the unlying GPIO button input value changed.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_BUTTONS
+EXTERN void up_buttoninit(void);
+EXTERN uint8_t up_buttons(void);
+#ifdef CONFIG_ARCH_IRQBUTTONS
+EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
+#endif
+#endif
+
 #undef EXTERN
 #ifdef __cplusplus
 }

configs/ubw32/src/Makefile

@@ -40,6 +40,10 @@ CFLAGS		+= -I$(TOPDIR)/sched
 ASRCS		= 
 CSRCS		= up_boot.c up_leds.c
 
+ifeq ($(CONFIG_ARCH_BUTTONS),y)
+CSRCS		+= up_buttons.c
+endif
+
 ifeq ($(CONFIG_NSH_ARCHINIT),y)
 CSRCS		+= up_nsh.c
 endif

configs/ubw32/src/up_buttons.c

@@ -0,0 +1,198 @@
+/****************************************************************************
+ * configs/ubw32/src/up_buttons.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+
+#include "pic32mx-internal.h"
+#include "ubw-internal.h"
+
+#ifdef CONFIG_ARCH_BUTTONS
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+/* The UBW32 board has three buttons.
+ *
+ * PROGRAM RE7  Pulled high, Grounded/low when depressed
+ * USER    RE6  Pulled high, Grounded/low when depressed
+ * RESET        Not software accessible
+ */
+
+#define GPIO_PROGRAM (GPIO_INPUT|GPIO_INT|GPIO_PORTE|GPIO_PIN7)
+#define GPIO_USER    (GPIO_INPUT|GPIO_INT|GPIO_PORTE|GPIO_PIN6)
+
+/* Change notification numbers:
+ *
+ * RE7 -> No change notification associated with RE7
+ * RE6 -> No change notification associated with RE6
+ */
+
+#define CN_PROGRAM
+#define CN_USER
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/* Pin configuration for each button */
+
+static const uint16_t g_buttonset[NUM_BUTTONS] =
+{
+  GPIO_PROGRAM GPIO_USER
+}
+
+/* Change notification number for each button */
+
+#ifdef CONFIG_ARCH_IRQBUTTONS
+static const uint8_t g_buttoncn[NUM_BUTTONS] =
+{
+  CN_PROGRAM, CN_USER
+}
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_buttoninit
+ *
+ * Description:
+ *   up_buttoninit() must be called to initialize button resources.  After
+ *   that, up_buttons() may be called to collect the current state of all
+ *   buttons or up_irqbutton() may be called to register button interrupt
+ *   handlers.
+ *
+ ****************************************************************************/
+
+void up_buttoninit(void)
+{
+  int i;
+
+  /* Configure input pins */
+
+  for (i = 0; i < NUM_BUTTONS; i++)
+    {
+      pic32mx_configgpio(g_buttonset[i]);
+    }
+}
+
+/****************************************************************************
+ * Name: up_buttons
+ ****************************************************************************/
+
+uint8_t up_buttons(void)
+{
+  uint8_t ret = 0;
+  int id;
+
+  /* Configure input pins */
+
+  for (id = 0; id < NUM_BUTTONS; id++)
+    {
+      if (pic32mx_gpioread(g_buttonset[id]))
+        {
+          ret |= (1 << id);
+        }
+    }
+
+  return ret;
+}
+
+/************************************************************************************
+ * Button support.
+ *
+ * Description:
+ *   up_buttoninit() must be called to initialize button resources.  After
+ *   that, up_buttons() may be called to collect the current state of all
+ *   buttons or up_irqbutton() may be called to register button interrupt
+ *   handlers.
+ *
+ *   After up_buttoninit() has been called, up_buttons() may be called to
+ *   collect the state of all buttons.  up_buttons() returns an 8-bit bit set
+ *   with each bit associated with a button.  See the BUTTON_*_BIT  definitions in
+ *   board.h for the meaning of each bit.
+ *
+ *   up_irqbutton() may be called to register an interrupt handler that will
+ *   be called when a button is depressed or released.  The ID value is a
+ *   button enumeration value that uniquely identifies a button resource. See the
+ *   BUTTON_* definitions in board.h for the meaning of enumeration value.  The
+ *   previous interrupt handler address is returned (so that it may restored, if
+ *   so desired).
+ *
+ *   Interrupts are automatically enabled when the button handler is attached and
+ *   automatically disabled when the button handler is detached.
+ *
+ *   When an interrupt occurs, it is due to a change on the GPIO input pin
+ *   associated with the button.  In that case, all attached change
+ *   notification handlers will be called.  Each handler must maintain state
+ *   and determine if the unlying GPIO button input value changed.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_ARCH_IRQBUTTONS
+xcpt_t up_irqbutton(int id, xcpt_t irqhandler)
+{
+  xcpt_t oldhandler = NULL;
+
+  if (id < NUM_BUTTONS)
+    {
+      oldhandler = pic32mx_gpioattach(g_buttonset[id], g_buttoncn[id], irqhandler);
+      if (irqbuttron)
+        {
+          pic32mx_gpioirqenable(g_buttoncn[id]);
+        }      
+    }
+  return oldhandler;
+}
+#endif
+#endif /* CONFIG_ARCH_BUTTONS */