From c016f94d0b10df4c94535381aa29eb1627ed9944 Mon Sep 17 00:00:00 2001 From: patacongo Date: Fri, 8 Jul 2011 22:39:02 +0000 Subject: [PATCH] Documentation update git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3759 42af7a65-404d-4744-a932-0658087f49c3 --- Documentation/NXGraphicsSubsystem.html | 20 +++++++------- Documentation/NuttX.html | 37 +++++++++++++++++++++++--- 2 files changed, 44 insertions(+), 13 deletions(-) diff --git a/Documentation/NXGraphicsSubsystem.html b/Documentation/NXGraphicsSubsystem.html index 4e6e780547..d55d6e449c 100644 --- a/Documentation/NXGraphicsSubsystem.html +++ b/Documentation/NXGraphicsSubsystem.html @@ -400,15 +400,15 @@

2.1 NX Header Files

@@ -435,7 +435,7 @@

- nxgl_coord_t + nxgl_coord_t. A given coordinate is limited to the screen height an width. If either of those values exceed 32,767 pixels, then the following will have to need to change: @@ -618,7 +618,7 @@ nxgl_nonintersecting(FAR struct nxgl_rect_s result[4], Description: Return the regions of rectangle rect1 that do not intersect with rect2. This will four rectangles, some of which may be - degenerate (and can be picked off with nxgl_nullrect()). + degenerate (and can be picked off with nxgl_nullrect()).

2.2.10 nxgl_rectoverlap()

@@ -919,10 +919,10 @@ void (*kbdin)(NXWINDOW hwnd, uint8_t nch, FAR const uint8_t *ch, FAR void *arg);

- Returned Value: NOne + Returned Value: None

-

2.3.4 nx_runinstance() (and nx_run() macro)

+

2.3.4 nx_runinstance() (and nx_run() macro)

Function Prototype:

     #include <nuttx/nxglib.h>
@@ -2539,7 +2539,7 @@ int nxf_convert_32bpp(FAR uint32_t *dest, uint16_t height,
     
    graphics/nxbe
       
    This is the back-end of a tiny windowing system.
       It can be used with either of two front-ends to complete a windowing system (see
-      nxmu and nxsu/ below).
+      nxmu and nxsu below).
       It contains most of the important window management logic:  clipping, window controls,
       window drawing, etc.
 
diff --git a/Documentation/NuttX.html b/Documentation/NuttX.html
index b0d9b366e3..191634eb48 100644
--- a/Documentation/NuttX.html
+++ b/Documentation/NuttX.html
@@ -8,7 +8,7 @@
   
     
       
    NuttX RTOS
    
-      
    Last Updated: July 3, 2011
    
+      
    Last Updated: July 8, 2011
    
     
   
 
@@ -1854,8 +1854,8 @@
   
     
    
       PIC32MX440F512H.
-	    This port uses the "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure Electronics.
-        This board features	the MicroChip PIC32MX440F512H.  See the Sure website for further	information about the DB-DP11215 board.
+        This port uses the "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure Electronics.
+        This board features    the MicroChip PIC32MX440F512H.  See the Sure website for further    information about the DB-DP11215 board.
     
    
     
      
       
      
@@ -2533,11 +2533,42 @@ nuttx-6.6 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
       Storage Demo Board," Model DB-DP11215 (http://www.sureelectronics.net/goods.php?id=1168).
       This board features the MicroChip PIC32MX440F512H MCU. (Untested on initial
       check-in).
+    * configs/stm3210e-eval/nsh2:  Add another NSH configuration for the STM32 with
+      some different properties.
+    * CONFIG_NSH_CONDEV:  Add a configuration option to allow using a different character
+      device (such a a different UART) for the NSH interface.  This allows, for example,
+      debug output to come from the console device while using another device for NSH.
+      There are some issues on initial check-in:  NuttX doesn't have termios and the
+      console device has special properties that make using NSH awkward.  Examples:
+      No CR-LF expansion, no character echoing, no command line editting.
+    * arch/arm/src/stm32/stm32_lowputc.c and stm32_serial.c.  Correct severl bugs
+      involving serial port configuration.  These bugs are only critical if you
+      are trying to using multiple UARTs on STM32.
+    * configs/stm3210e-eval/src/up_lcd.c:  Add a driver for the STM3210E-EVAL's LCD.
+    * configs/stm3210e-eval/nx:  Add NX configuration for the STM3210E-EVAL.
+    * configs/nuttx/arch.h (and arch/arm/src/stm32, configs/*/src/up_buttons.c):
+      Standardize interfaces exported for button support and button interrupts.
+    * configs/stm3210e-eval/src/up_buttons.c - Add interrupting button support.
+      Also fixes a few errors in STM3210E-EVAL button decoding.
+    * configs/stm3210e-eval/buttons: Add a configuration to exercise STM3210E-EVAL
+      buttons.
+    * arch/arm/src/stm32/stm32_gpio.c:  GPIO interrupt handling for pin
+      numbers were being aliased:  5-9 together and 10-15 together.  Extended
+      the logic to peform decoding of GPIO interrupts and unique dispatching
+      for all 16 pins.
+    * configs/stm3210e-eval/nxtext: Add a configuration for the apps/examples/nxtext
+      example.  This example focuses on placing text on the background while
+      pop-up windows occur.  Text should continue to update normally with or without
+      the popup windows present.
 
 apps-6.6 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
 
     * Make.defs, namedapp/namedapp.c: Several structural changes made to get a
       clean compile under the ez80 ZDS-II toolchain (no design changes).
+    * apps/examples/buttons: Add a test for the new standardized button interfaces
+    * apps/examples/nxtext: Add another NX graphics test.  This one focus on
+      placing text on the background while pop-up windows occur.  Text should
+      continue to update normally with or without the popup windows present.
 
 pascal-3.1 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>