sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

SAM4S Xplained: Boot PPLLA to 2450MHz to support USB

Browse Source
This commit is contained in:
Gregory Nutt 2014-04-21 18:15:55 -06:00
parent 94be77be81
commit c033ec399f
2 changed files with 25 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ChangeLog
View File

@ -7171,7 +7171,7 @@
also reset the camera module. Noted by David Sidrane (2014-4-11).
* arch/arm/src/stm32/stm32_usbhost.c/.h and stm32_otgfshost.c: USB host
tracing added by Leo (2014-4-12).
* arch/arm/src/sama5/sam_adc.c, sam_can.c, sam_emac.c, sam_gmac.c,
* arch/arm/src/sama5/sam_adc.c, sam_can.c, sam_emac.c, sam_gmac.c,
sam_ssc.c, and sam_twi.c: If running from SDRAM, then BOARD_MCK_FREQUENCY
is not a constant and cannot be used in conditional compilation (2014-4-16).
* drivers/lcd/mio283qt9a.c and include/nuttx/lcd/mio283qt9a.h: Update the

36
configs/sam4s-xplained-pro/include/board.h
View File

@ -67,21 +67,21 @@
* Source: 12MHz crystall at 12MHz
* PLLmul: 10
* PLLdiv: 1 (bypassed)
* Fpll: (12MHz * 10) / 1 = 120MHz
* Fpll: (12MHz * 20) / 1 = 240MHz
*/
#define BOARD_MAINOSC_FREQUENCY (12000000)
#define BOARD_CKGR_PLLAR_MUL (9 << PMC_CKGR_PLLAR_MUL_SHIFT)
#define BOARD_CKGR_PLLAR_MUL (19 << PMC_CKGR_PLLAR_MUL_SHIFT)
#define BOARD_CKGR_PLLAR_DIV PMC_CKGR_PLLAR_DIV_BYPASS
#define BOARD_CKGR_PLLAR_COUNT (63 << PMC_CKGR_PLLAR_COUNT_SHIFT)
#define BOARD_PLLA_FREQUENCY (10*BOARD_MAINOSC_FREQUENCY) /* PLLA = 120Mhz */
#define BOARD_PLLA_FREQUENCY (20*BOARD_MAINOSC_FREQUENCY) /* PLLA = 240Mhz */
/* PMC master clock register settings */
#define BOARD_PMC_MCKR_CSS PMC_MCKR_CSS_PLLA
#define BOARD_PMC_MCKR_PRES PMC_MCKR_PRES_DIV1
#define BOARD_MCK_FREQUENCY (BOARD_PLLA_FREQUENCY/1) /* MCK = 120Mhz */
#define BOARD_CPU_FREQUENCY (BOARD_PLLA_FREQUENCY/1) /* CPU = 120Mhz */
#define BOARD_PMC_MCKR_PRES PMC_MCKR_PRES_DIV2
#define BOARD_MCK_FREQUENCY (BOARD_PLLA_FREQUENCY/2) /* MCK = 120Mhz */
#define BOARD_CPU_FREQUENCY (BOARD_PLLA_FREQUENCY/2) /* CPU = 120Mhz */
/* USB UTMI PLL start-up time */
@ -98,16 +98,28 @@
/* MCK = 120MHz, CLKDIV = 149, MCI_SPEED = 120MHz / 2 * (149+1) = 400 KHz */
#define HSMCI_INIT_CLKDIV (149 << HSMCI_MR_CLKDIV_SHIFT) /* 120M MCK */
#define HSMCI_INIT_CLKDIV (149 << HSMCI_MR_CLKDIV_SHIFT)
/* MCK = 120MHz, CLKDIV = 4, MCI_SPEED = 120MHz / 2 * (4+1) = 12 MHz */
/* MCK = 120MHz, CLKDIV = 3, MCI_SPEED = 120MHz / 2 * (3+1) = 15 MHz */
#define HSMCI_MMCXFR_CLKDIV (4 << HSMCI_MR_CLKDIV_SHIFT)
#define HSMCI_MMCXFR_CLKDIV (3 << HSMCI_MR_CLKDIV_SHIFT)
/* MCK = 120MHz, CLKDIV = 0, MCI_SPEED = 120MHz / 2 * (2+1) = 20 MHz */
#define HSMCI_SDXFR_CLKDIV (2 << HSMCI_MR_CLKDIV_SHIFT) /* 120M MCK, 20M SDCLK */
#define HSMCI_SDWIDEXFR_CLKDIV HSMCI_SDXFR_CLKDIV /* 120M MCK, 20M SDCLK */
#define HSMCI_SDXFR_CLKDIV (2 << HSMCI_MR_CLKDIV_SHIFT)
#define HSMCI_SDWIDEXFR_CLKDIV HSMCI_SDXFR_CLKDIV
/* The PLL clock (USB_48M or UDPCK) is driven from the output of the PLL,
* PLLACK. The PLL clock must be 48MHz. PLLACK can be divided down via the
* PMC USB register to provide the PLL clock. So in order to use the USB
* feature, the PLL output must be a multiple of 48MHz.
*
* PLLACK = 240MHz, USBDIV=4, USB_48M = 240 MHz / (4 + 1) = 48MHz
* PLLACK = 192MHz, USBDIV=5, USB_48M = 192 MHz / (3 + 1) = 48MHz
*/
#define BOARD_PMC_USBS (0)
#define BOARD_PMC_USBDIV (4 << PMC_USB_USBDIV_SHIFT)
/* FLASH wait states:
*
@ -188,7 +200,7 @@
#define LED_IDLE 0 /* MCU is is sleep mode Not used */
/* Thus if D301 is statically on, NuttX has successfully booted and is,
* apparently, running normmally.
* apparently, running normmally.
*/
/* Button definitions ***************************************************************/