sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update README file

Browse Source
This commit is contained in:
Gregory Nutt 2017-03-24 12:11:31 -06:00
parent 60268b6b87
commit c12b066f14
1 changed files with 56 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

62
configs/clicker2-stm32/README.txt
View File

@ -87,18 +87,68 @@ Using JTAG
https://www.mikroe.com/how-to-use-st-link-v2-with-clicker-2-for-stm32-a-detailed-walkthrough/
http://www.playembedded.org/blog/en/2016/02/06/mikroe-clicker-2-for-stm32-and-stlink-v2/
NOTE that the FLASH is locked. You may need to follow the instructions at
the second link to unlock it (although I think you may be able to do this
with the ST-Micro ST-Link Utility as well).
NOTE that the FLASH probably has read protection enabled locked. You may
need to follow the instructions at the second link to unlock it. You can
also use the STM32 ST-Link CLI tool to remove the read protection using
the -OB command:
$ ./ST-LINK_CLI.exe -c SN=53FF6F064966545035320387 SWD LPM
STM32 ST-LINK CLI v2.3.0
STM32 ST-LINK Command Line Interface
ST-LINK SN : 53FF6F064966545035320387
ST-LINK Firmware version : V2J24S4
Connected via SWD.
SWD Frequency = 4000K.
Target voltage = 3.2 V.
Connection mode : Normal.
Debug in Low Power mode enabled.
Device ID:0x413
Device family :STM32F40xx/F41xx
$ ./ST-LINK_CLI.exe -OB RDP=0
STM32 ST-LINK CLI v2.3.0
STM32 ST-LINK Command Line Interface
ST-LINK SN : 53FF6F064966545035320387
ST-LINK Firmware version : V2J24S4
Connected via SWD.
SWD Frequency = 4000K.
Target voltage = 3.2 V.
Connection mode : Normal.
Device ID:0x413
Device family :STM32F40xx/F41xx
Updating option bytes...
Option bytes updated successfully.
NOTE:
1. The ST-LINK Utility command line interface is located at:
[Install_Directory]\STM32 ST-LINK Utility\ST-LINK Utility\ST-LINK_CLI.exe
2. You can get a summary of all of the command options by running
ST-LINK_CLI.exe with no arguments.
3. You can get the serial number of the ST-Link when from the information
window if you connect via the ST-Link Utility:
11:04:28 : ST-LINK SN : 53FF6F064966545035320387
11:04:28 : ST-LINK Firmware version : V2J24S4
11:04:28 : Connected via SWD.
11:04:28 : SWD Frequency = 100 KHz.
11:04:28 : Connection mode : Normal.
11:04:28 : Debug in Low Power mode enabled.
11:04:30 : Device ID:0x413
11:04:30 : Device family :STM32F40xx/F41xx
11:04:30 : Can not read memory!
Disable Read Out Protection and retry.
You can avoid the mess of jumpers using the mikroProg to ST-Link v2 adapter
along with a 2x5, 10-wire ribbon cable connector:
https://shop.mikroe.com/add-on-boards/adapter/mikroprog-st-link-v2-adapter
OpenOCD can be used with the ST-Link to provide a debug environment. I suspect,
however, that adapter can be used with other JTAG debuggers such as J-Link,
but that remains to be verified.
Then you can use the ST-Link Utility or other debugger software to write
the NuttX binary to FLASH. OpenOCD can be used with the ST-Link to provide
a debug environment. The debug adaptor is NOT compatible with other JTAG
debuggers such as the Segger J-Link.
Configurations
==============