SAMA5: Add file structure to support board-specific initialization of NOR flash

configs/sama5d3x-ek/README.txt

@@ -729,6 +729,14 @@ Configurations
        CONFIG_SAMA5_EBICS0_SIZE=134217728      : Memory size is 128KB
        CONFIG_SAMA5_EBICS0_NOR=y               : Memory type is NOR FLASH
 
+       CONFIG_FLASH_START=0x10000000           : Physical FLASH start address
+       CONFIG_FLASH_VSTART=0x10000000          : Virtual FLASH start address
+       CONFIG_FLASH_SIZE=134217728             : FLASH size (again)
+
+       CONFIG_RAM_START=0x00300400             : Data stored after page table
+       CONFIG_RAM_VSTART=0x00300400
+       CONFIG_RAM_SIZE=114688                  : Available size of 128KB - 16KB for page table
+
        NOTE:  In order to boot in this configuration, you need to close the
        BMS jumper.
 

configs/sama5d3x-ek/scripts/norflash.ld

@@ -46,7 +46,7 @@
 MEMORY
 {
 	norflash (W!RX) : ORIGIN = 0x10000000, LENGTH = 128M
-	isram    (WRX!)  : ORIGIN = 0x00304000, LENGTH = 128K - 16K
+	isram    (WR)   : ORIGIN = 0x00304000, LENGTH = 128K - 16K
 }
 
 OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")

configs/sama5d3x-ek/src/Makefile

@@ -46,6 +46,10 @@ ifeq ($(CONFIG_HAVE_CXX),y)
 CSRCS += sam_cxxinitialize.c
 endif
 
+ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
+CSRCS += sam_norflash.c
+endif
+
 ifeq ($(CONFIG_ARCH_LEDS),y)
 CSRCS += sam_autoleds.c
 else

configs/sama5d3x-ek/src/sam_norflash.c

@@ -0,0 +1,102 @@
+/************************************************************************************
+ * configs/sama5d3x-ek/src/sam_norflash.c
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include "sama5d3x-ek.h"
+
+#ifdef CONFIG_SAMA5_BOOT_CS0FLASH
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/****************************************************************************
+ * Name: board_norflash_config
+ *
+ * Description:
+ *   If CONFIG_SAMA5_BOOT_CS0FLASH, then the system is boot directly off
+ *   CS0 NOR FLASH.  In this case, we assume that we get here from the
+ *   primary boot loader under these conditions:
+ *
+ *     "If BMS signal is tied to 0, BMS_BIT is read at 1.  The ROM Code
+ *      allows execution of the code contained into the memory connected to
+ *      Chip Select 0 of the External Bus Interface.
+ *
+ *     "To achieve that, the following sequence is preformed by the ROM
+ *      Code:
+ *
+ *        - The main clock is the on-chip 12 MHz RC oscillator,
+ *        - The Static Memory Controller is configured with timing allowing
+ *          code execution inCS0 external memory at 12 MHz
+ *        - AXI matrix is configured to remap EBI CS0 address at 0x0
+ *        - 0x0 is loaded in the Program Counter register
+ *
+ *     "The user software in the external memory must perform the next
+ *      operation in order to complete the clocks and SMC timings
+ *      configuration to run at a higher clock frequency:
+ *
+ *        - Enable the 32768 Hz oscillator if best accuracy is needed
+ *        - Reprogram the SMC setup, cycle, hold, mode timing registers
+ *          for EBI CS0, to adapt them to the new clock
+ *        - Program the PMC (Main Oscillator Enable or Bypass mode)
+ *        - Program and Start the PLL
+ *        - Switch the system clock to the new value"
+ *
+ *   This function provides the board-specific implementation of the logic
+ *   to reprogram the SMC.
+ *
+ ****************************************************************************/
+
+void board_norflash_config(void)
+{
+#warning Missing logic
+}
+
+#endif /* CONFIG_SAMA5_BOOT_CS0FLASH */