SAMA5D2: Update boot logic, AXIMX, SFR, and WDT register definition files for SAMA5D2
This commit is contained in:
Gregory Nutt
parent
76ab22debf
commit
c391ada5e7
@ -1,7 +1,7 @@
|
||||
/************************************************************************************
|
||||
* arch/arm/src/sama5/chip/sam_sfr.h
|
||||
*
|
||||
* Copyright (C) 2013-2014 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2013-2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -58,20 +58,33 @@
|
||||
/* 0x002c: Reserved */
|
||||
#define SAM_SFR_UTMICKTRIM_OFFSET 0x0030 /* UTMI Clock Trimming Register */
|
||||
|
||||
#ifdef ATSAMA5D4
|
||||
#if defined(ATSAMA5D2) || defined(ATSAMA5D4)
|
||||
# define SAM_SFR_UTMIHSTRIM_OFFSET 0x0034 /* UTMI High Speed Trimming Register */
|
||||
# define SAM_SFR_UTMIFSTRIM_OFFSET 0x0038 /* UTMI Full Speed Trimming Register */
|
||||
# define SAM_SFR_UTMISWAP_OFFSET 0x003c /* UTMI DP/DM Pin Swapping Register */
|
||||
#endif
|
||||
|
||||
#define SAM_SFR_EBICFG_OFFSET 0x0040 /* EBI Configuration Register */
|
||||
/* 0x0044-0x3ffc: Reserved */
|
||||
#ifdef ATSAMA5D4
|
||||
|
||||
#ifdef ATSAMA5D2
|
||||
# define SAM_SFR_ANACFG_OFFSET 0x0044 /* Analog Configuration Register */
|
||||
# define SAM_SFR_CAN_OFFSET 0x0048 /* CAN Memories Address-based Register */
|
||||
#endif
|
||||
|
||||
#if defined(ATSAMA5D2) || defined(ATSAMA5D4)
|
||||
# define SAM_SFR_SN0_OFFSET 0x004c /* Serial Number 0 Register */
|
||||
# define SAM_SFR_SN1_OFFSET 0x0050 /* Serial Number 1 Register */
|
||||
# define SAM_SFR_AICREDIR_OFFSET 0x0054 /* AIC Redirection Register */
|
||||
#endif
|
||||
|
||||
#ifdef ATSAMA5D2
|
||||
# define SAM_SFR_L2CCHRAMC_OFFSET 0x0044 /* L2CC HRAMC1 */
|
||||
/* 0x005c-0x008c: Reserved */
|
||||
# define SAM_SFR_I2SCLKSEL_OFFSET 0x0090 /* I2SC Register */
|
||||
# define SAM_SFR_QSPICLK_OFFSET 0x0094 /* QSPI Clock Pad Supply Select Register */
|
||||
#endif
|
||||
/* 0x0098-0x3ffc: Reserved */
|
||||
|
||||
/* SFR Register Addresses ***********************************************************/
|
||||
|
||||
#define SAM_SFR_DDRCFG (SAM_SFR_VBASE+SAM_SFR_DDRCFG_OFFSET) /* REVISIT */
|
||||
@ -80,7 +93,7 @@
|
||||
#define SAM_SFR_SECURE (SAM_SFR_VBASE+SAM_SFR_SECURE_OFFSET)
|
||||
#define SAM_SFR_UTMICKTRIM (SAM_SFR_VBASE+SAM_SFR_UTMICKTRIM_OFFSET)
|
||||
|
||||
#ifdef ATSAMA5D4
|
||||
#if defined(ATSAMA5D2) || defined(ATSAMA5D4)
|
||||
# define SAM_SFR_UTMIHSTRIM (SAM_SFR_VBASE+SAM_SFR_UTMIHSTRIM_OFFSET)
|
||||
# define SAM_SFR_UTMIFSTRIM (SAM_SFR_VBASE+SAM_SFR_UTMIFSTRIM_OFFSET)
|
||||
# define SAM_SFR_UTMISWAP (SAM_SFR_VBASE+SAM_SFR_UTMISWAP_OFFSET)
|
||||
@ -88,12 +101,23 @@
|
||||
|
||||
#define SAM_SFR_EBICFG (SAM_SFR_VBASE+SAM_SFR_EBICFG_OFFSET)
|
||||
|
||||
#ifdef ATSAMA5D4
|
||||
#ifdef ATSAMA5D2
|
||||
# define SAM_SFR_ANACFG (SAM_SFR_VBASE+SAM_SFR_ANACFG_OFFSET)
|
||||
# define SAM_SFR_CAN (SAM_SFR_VBASE+SAM_SFR_CAN_OFFSET)
|
||||
#endif
|
||||
|
||||
#if defined(ATSAMA5D2) || defined(ATSAMA5D4)
|
||||
# define SAM_SFR_SN0 (SAM_SFR_VBASE+SAM_SFR_SN0_OFFSET)
|
||||
# define SAM_SFR_SN1 (SAM_SFR_VBASE+SAM_SFR_SN1_OFFSET)
|
||||
# define SAM_SFR_AICREDIR (SAM_SFR_VBASE+SAM_SFR_AICREDIR_OFFSET)
|
||||
#endif
|
||||
|
||||
#ifdef ATSAMA5D2
|
||||
# define SAM_SFR_L2CCHRAMC (SAM_SFR_VBASE+SAM_SFR_L2CCHRAMC_OFFSET)
|
||||
# define SAM_SFR_I2SCLKSEL (SAM_SFR_VBASE+SAM_SFR_I2SCLKSEL_OFFSET)
|
||||
# define SAM_SFR_QSPICLK (SAM_SFR_VBASE+SAM_SFR_QSPICLK_OFFSET)
|
||||
#endif
|
||||
|
||||
/* SFR Register Bit Definitions *****************************************************/
|
||||
|
||||
/* DDR Configuration register */
|
||||
@ -109,8 +133,20 @@
|
||||
# define SFR_OHCIICR_RES2 (1 << 2) /* Bit 2: USB port 2 reset */
|
||||
#define SFR_OHCIICR_ARIE (1 << 4) /* Bit 4: OHCI asynchronous resume interrupt enable */
|
||||
#define SFR_OHCIICR_APPSTART (0) /* Bit 5: Reserved, must write 0 */
|
||||
|
||||
#ifdef ATSAMA5D2
|
||||
# define SFR_OHCIICR_SUSPEND(n) (1 << ((n)+8))
|
||||
# define SFR_OHCIICR_SUSPENDA (1 << 8) /* Bit 8: Suspend USB port A */
|
||||
# define SFR_OHCIICR_SUSPENDB (1 << 9) /* Bit 9: Suspend USB port B */
|
||||
# define SFR_OHCIICR_SUSPENDC (1 << 10) /* Bit 10: Suspend USB port C */
|
||||
#endif
|
||||
|
||||
#define SFR_OHCIICR_UDPPUDIS (1 << 23) /* Bit 23: USB device pull-up disable */
|
||||
|
||||
#ifdef ATSAMA5D2
|
||||
# define SFR_OHCIICR_HSIC_SEL (0) /* Bit 27: Reserved (must write 0) */
|
||||
#endif
|
||||
|
||||
/* OHCI Interrupt Status Register */
|
||||
|
||||
#define SFR_OHCIISR_RIS0 (1 << 0) /* Bit 0: USB port 0 resume detected */
|
||||
@ -129,15 +165,17 @@
|
||||
# define SFR_UTMICKTRIM_FREQ_12MHZ (0 << SFR_UTMICKTRIM_FREQ_SHIFT) /* 12 MHz reference clock */
|
||||
# define SFR_UTMICKTRIM_FREQ_16MHZ (1 << SFR_UTMICKTRIM_FREQ_SHIFT) /* 16 MHz reference clock */
|
||||
# define SFR_UTMICKTRIM_FREQ_24MHZ (2 << SFR_UTMICKTRIM_FREQ_SHIFT) /* 24 MHz reference clock */
|
||||
#ifndef ATSAMA5D2
|
||||
# define SFR_UTMICKTRIM_FREQ_48MHZ (3 << SFR_UTMICKTRIM_FREQ_SHIFT) /* 48 MHz reference clock */
|
||||
#endif
|
||||
|
||||
#ifdef ATSAMA5D4
|
||||
#if defined(ATSAMA5D2) || defined(ATSAMA5D4)
|
||||
# define SFR_UTMICKTRIM_VBG_SHIFT (16) /* Bits 16-19: UTMI Band Gap Voltage Trimming */
|
||||
# define SFR_UTMICKTRIM_VBG_MASK (15 << SFR_UTMICKTRIM_VBG_SHIFT)
|
||||
# define SFR_UTMICKTRIM_VBG(n) ((uint32_t)(n) << SFR_UTMICKTRIM_VBG_SHIFT)
|
||||
#endif
|
||||
|
||||
#ifdef ATSAMA5D4
|
||||
#if defined(ATSAMA5D2) || defined(ATSAMA5D4)
|
||||
/* UTMI High Speed Trimming Register */
|
||||
|
||||
# define SFR_UTMIHSTRIM_SQUELCH_SHIFT (0) /* Bits 0-2: UTMI HS SQUELCH Voltage Trimming */
|
||||
@ -157,7 +195,7 @@
|
||||
# define SFR_UTMIHSTRIM_SLOPE2(n) ((uint32_t)(n) << SFR_UTMIHSTRIM_SLOPE2_SHIFT)
|
||||
#endif
|
||||
|
||||
#ifdef ATSAMA5D4
|
||||
#if defined(ATSAMA5D2) || defined(ATSAMA5D4)
|
||||
/* UTMI Full Speed Trimming Register */
|
||||
|
||||
# define SFR_UTMIFSTRIM_RISE_SHIFT (0) /* Bits 0-2: FS Transceiver Output Rising Slope Trimming */
|
||||
@ -177,9 +215,10 @@
|
||||
# define SFR_UTMIFSTRIM_ZP(n) ((uint32_t)(n) << SFR_UTMIHSTRIM_SLOPE2_SHIFT)
|
||||
#endif
|
||||
|
||||
#ifdef ATSAMA5D4
|
||||
#if defined(ATSAMA5D2) || defined(ATSAMA5D4)
|
||||
/* UTMI DP/DM Pin Swapping Register */
|
||||
|
||||
# define SFR_UTMISWAP_PORT(n) (1 << (n)) /* Bit n: PORT n DP/DM Pin Swapping */
|
||||
# define SFR_UTMISWAP_PORT0 (1 << 0) /* Bit 0: PORT 0 DP/DM Pin Swapping */
|
||||
# define SFR_UTMISWAP_PORT1 (1 << 1) /* Bit 1: PORT 1 DP/DM Pin Swapping */
|
||||
# define SFR_UTMISWAP_PORT2 (1 << 2) /* Bit 2: PORT 2 DP/DM Pin Swapping */
|
||||
@ -214,16 +253,61 @@
|
||||
# define SFR_EBICFG_BMS (1 << 16) /* Bit 16: BMS Sampled Value (Read Only) */
|
||||
#endif
|
||||
|
||||
#ifdef ATSAMA5D4
|
||||
#ifdef ATSAMA5D2
|
||||
/* Analog Configuration Register */
|
||||
|
||||
# define SFR_ANACFG_SMDDREN (1 << 0) /* Bit 0: DDR Supply Monitor Enable */
|
||||
#endif
|
||||
|
||||
#ifdef ATSAMA5D2
|
||||
/* CAN Memories Address-based Register */
|
||||
|
||||
# define SFR_CAN0_EXTMEMADDR_SHIFT (0) /* Bits 0-15: MSB CAN0 Base Address */
|
||||
# define SFR_CAN0_EXTMEMADDR_MASK (0xffff << SFR_CAN0_EXTMEMADDR_SHIFT)
|
||||
# define SFR_CAN0_EXTMEMADDR(n) ((uint32_t)(n) << SFR_CAN0_EXTMEMADDR_SHIFT)
|
||||
# define SFR_CAN1_EXTMEMADDR_SHIFT (16) /* Bits 16-31: MSB CAN0 Base Address */
|
||||
# define SFR_CAN1_EXTMEMADDR_MASK (0xffff << SFR_CAN1_EXTMEMADDR_SHIFT)
|
||||
# define SFR_CAN1_EXTMEMADDR(n) ((uint32_t)(n) << SFR_CAN1_EXTMEMADDR_SHIFT)
|
||||
#endif
|
||||
|
||||
#if defined(ATSAMA5D2) || defined(ATSAMA5D4)
|
||||
/* Serial Number 0 Register (32-bit value) */
|
||||
/* Serial Number 1 Register (32-bit value) */
|
||||
|
||||
/* AIC Redirection Register */
|
||||
|
||||
# define SFR_AICREDIR_NSAIC (1 << 0) /* Bit 0: Interrupt redirection to Non-Secure AIC */
|
||||
# define SFR_AICREDIR_ENABLE (1 << 0) /* Bit 0: 1=All interrupts to AIC */
|
||||
# define SFR_AICREDIR_DISABLE (0) /* Bit 0: 0=Secure interrupts to SAIC */
|
||||
# define SFR_AICREDIR_KEY (0x5f67b102) /* Bits 1-31: Access key */
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef ATSAMA5D2
|
||||
/* L2CC HRAMC1 */
|
||||
|
||||
# define SFR_L2CCHRAMC_SRAMSEL (1 << 0) /* Bit 0: SRAM selector */
|
||||
# define SFR_L2CCHRAMC_SRAM (0) /* Bit 0: 0=Selects SRAM */
|
||||
# define SFR_L2CCHRAMC_L2CC (1 << 0) /* Bit 0: 1=Selects L2CC */
|
||||
#endif
|
||||
|
||||
#ifdef ATSAMA5D2
|
||||
/* I2SC Register */
|
||||
|
||||
# define SFR_I2S_CLKSEL0 (1 << 0) /* Bit 0: Clock selection 0 */
|
||||
# define SFR_I2S_CLKSEL0_GCLK (0) /* Bit 0: 0=Selects GCLK */
|
||||
# define SFR_I2S_CLKSEL0_PCLK (1 << 0) /* Bit 0: 1=Selects PCLK */
|
||||
# define SFR_I2S_CLKSEL1 (1 << 1) /* Bit 1: Clock selection 1 */
|
||||
# define SFR_I2S_CLKSEL1_GCLK (0) /* Bit 0: 0=Selects GCLK */
|
||||
# define SFR_I2S_CLKSEL1_PCLK (1 << 1) /* Bit 0: 1=Selects PCLK */
|
||||
#endif
|
||||
|
||||
#ifdef ATSAMA5D2
|
||||
/* QSPI Clock Pad Supply Select Register */
|
||||
|
||||
# define SFR_QSPICLK_SUPSEL (1 << 0) /* Bit 0: Supply selection */
|
||||
# define SFR_QSPICLK_1p8V (0) /* Bit 0: 0=1.8V */
|
||||
# define SFR_QSPICLK_3p3V (1 << 0) /* Bit 0: 1=3.3V */
|
||||
#endif
|
||||
|
||||
#endif /* __ARCH_ARM_SRC_SAMA5_CHIP_SAM_SFR_H */
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
* arch/arm/src/sama5/chip/sam_wdt.h
|
||||
* Watchdog Timer (WDT) definitions for the SAMA5D3
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2013, 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -65,7 +65,12 @@
|
||||
/* WDT register bit definitions ********************************************************/
|
||||
/* Watchdog Timer Control Register */
|
||||
|
||||
#define WDT_CR_WDRSTT (1 << 0) /* Bit 0: Watchdog Rest */
|
||||
#define WDT_CR_WDRSTT (1 << 0) /* Bit 0: Watchdog Restart */
|
||||
|
||||
#ifdef ATSAMA5D2
|
||||
#define WDT_CR_LOCKMR (1 << 4) /* Bit 4: Lock Mode Register Write Access */
|
||||
#endif
|
||||
|
||||
#define WDT_CR_KEY_SHIFT (24) /* Bits 24-31: Password */
|
||||
#define WDT_CR_KEY_MASK (0xff << WDT_CR_KEY_SHIFT)
|
||||
# define WDT_CR_KEY (0xa5 << WDT_CR_KEY_SHIFT)
|
||||
|
||||
@ -59,6 +59,7 @@
|
||||
|
||||
#include "chip/sam_wdt.h"
|
||||
#include "chip/sam_aximx.h"
|
||||
#include "chip/sam_sfr.h"
|
||||
|
||||
#include "sam_clockconfig.h"
|
||||
#include "sam_memorymap.h"
|
||||
@ -412,17 +413,8 @@ void up_boot(void)
|
||||
const uint32_t *src;
|
||||
uint32_t *dest;
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ARCH_CHIP_SAMA5D2) && !defined(CONFIG_ARCH_L2CACHE)
|
||||
/* The SAMA5D2 features a second 128-Kbyte SRAM that can be allocated
|
||||
* either to the L2 cache controller or used as an internal SRAM. After
|
||||
* reset, this block is connected to the L2 cache controller. The
|
||||
* SRAM_SEL bit, located in the SFR_L2CC_HRAMC register, is used to
|
||||
* reassign this memory as system SRAM, making the two 128-Kbyte
|
||||
* RAMs contiguous.
|
||||
*/
|
||||
|
||||
# warning Missing Logic
|
||||
#ifdef ATSAMA5D2
|
||||
uint32_t regval;
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_ARCH_ROMPGTABLE
|
||||
@ -440,6 +432,26 @@ void up_boot(void)
|
||||
|
||||
#endif /* CONFIG_ARCH_ROMPGTABLE */
|
||||
|
||||
#ifdef ATSAMA5D2
|
||||
/* The SAMA5D2 features a second 128-Kbyte SRAM that can be allocated
|
||||
* either to the L2 cache controller or used as an internal SRAM. After
|
||||
* reset, this block is connected to the L2 cache controller. The
|
||||
* SRAM_SEL bit, located in the SFR_L2CC_HRAMC register, is used to
|
||||
* reassign this memory as system SRAM, making the two 128-Kbyte
|
||||
* RAMs contiguous.
|
||||
*/
|
||||
|
||||
regval = getreg32(SAM_SFR_L2CCHRAMC);
|
||||
|
||||
#ifdef CONFIG_ARCH_L2CACHE
|
||||
regval |= SFR_L2CCHRAMC_SRAMSEL; /* 1=Selects L2CC */
|
||||
#else
|
||||
regval &= ~SFR_L2CCHRAMC_SRAMSEL; /* 0=Selects SRAM */
|
||||
#endif
|
||||
|
||||
putreg32(regval, SAM_SFR_L2CCHRAMC);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_ARCH_RAMFUNCS
|
||||
/* Copy any necessary code sections from FLASH to RAM. The correct
|
||||
* destination in SRAM is given by _sramfuncs and _eramfuncs. The
|
||||
|
||||
Loading…
Reference in New Issue
Block a user