Start of DMA support

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2554 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2010-03-26 01:22:01 +00:00
parent 9831a3371f
commit c44e85efd9
3 changed files with 503 additions and 0 deletions

View File

@ -49,9 +49,20 @@
/* Get customizations for each supported chip */
#ifdef CONFIG_ARCH_CHIP_AT91SAM3U4E
/* Internal memory */
# define CONFIG_SAM3U_SRAM0_SIZE 0x00008000 /* 32Kb */
# define CONFIG_SAM3U_SRAM1_SIZE 0x00004000 /* 16Kb */
# define CONFIG_SAM3U_NFCSRAM_SIZE 0x00001000 /* 4Kb */
/* DMA */
# define CONFIG_SAM3U_NDMACHAN 4 /* 4 DMA Channels */
# define CONFIG_SAM3U_DMACHAN8SET 0x07 /* DMA Channels 0-2 have 8-byte FIFOs */
# define CONFIG_SAM3U_DMACHAN32SET 0x08 /* DMA channel 3 has a 32-byte FIFO */
/* Memory card interface */
# define CONFIG_SAM3U_MCI2 1
#else
# error "Unknown SAM3U chip type"

431
arch/arm/src/sam3u/sam3u_dmac.c Executable file
View File

@ -0,0 +1,431 @@
/****************************************************************************
* arch/arm/src/sam3u-ek/sam3u_dmac.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <semaphore.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <arch/irq.h>
#include "up_arch.h"
#include "up_internal.h"
#include "os_internal.h"
#include "chip.h"
#include "sam3u_dmac.h"
#include "sam3u_internal.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure descibes one DMA channel */
struct sam3u_dma_s
{
uint8_t chan; /* DMA channel number (0-6) */
// uint8_t irq; /* DMA channel IRQ number */
sem_t sem; /* Used to wait for DMA channel to become available */
uint32_t base; /* DMA register channel base address */
dma_callback_t callback; /* Callback invoked when the DMA completes */
void *arg; /* Argument passed to callback function */
};
/****************************************************************************
* Private Data
****************************************************************************/
/* This array describes the state of each DMA */
#if CONFIG_SAM3U_NDMACHAN != 4
# error "Logic here assumes CONFIG_SAM3U_NDMACHAN is 4"
#endif
static struct sam3u_dma_s g_dma[CONFIG_SAM3U_NDMACHAN] =
{
{
.chan = 0,
// .irq = SAM3U_IRQ_DMA1CH1,
.base = SAM3U_DMACHAN0_BASE,
},
{
.chan = 1,
// .irq = SAM3U_IRQ_DMA1CH2,
.base = SAM3U_DMACHAN1_BASE,
},
{
.chan = 2,
// .irq = SAM3U_IRQ_DMA1CH3,
.base = SAM3U_DMACHAN2_BASE,
},
{
.chan = 3,
// .irq = SAM3U_IRQ_DMA1CH4,
.base = SAM3U_DMACHAN3_BASE,
}
};
/****************************************************************************
* Private Functions
****************************************************************************/
/************************************************************************************
* Name: sam3u_dmatake() and sam3u_dmagive()
*
* Description:
* Used to get exclusive access to a DMA channel.
*
************************************************************************************/
static void sam3u_dmatake(FAR struct sam3u_dma_s *dmach)
{
/* Take the semaphore (perhaps waiting) */
while (sem_wait(&dmach->sem) != 0)
{
/* The only case that an error should occur here is if the wait was awakened
* by a signal.
*/
ASSERT(errno == EINTR);
}
}
static inline void sam3u_dmagive(FAR struct sam3u_dma_s *dmach)
{
(void)sem_post(&dmach->sem);
}
/************************************************************************************
* Name: sam3u_dmachandisable
*
* Description:
* Disable the DMA channel
*
************************************************************************************/
static void sam3u_dmachandisable(struct sam3u_dma_s *dmach)
{
/* Disable all interrupts at the DMA controller */
/* Disable the DMA channel */
/* Clear pending channel interrupts */
# warning "Missing logic"
}
/************************************************************************************
* Name: sam3u_dmainterrupt
*
* Description:
* DMA interrupt handler
*
************************************************************************************/
static int sam3u_dmainterrupt(int irq, void *context)
{
# warning "Missing logic"
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: sam3u_dmainitialize
*
* Description:
* Initialize the DMA subsystem
*
* Returned Value:
* None
*
****************************************************************************/
void weak_function up_dmainitialize(void)
{
struct sam3u_dma_s *dmach;
int chndx;
/* Initialize each DMA channel */
for (chndx = 0; chndx < CONFIG_SAM3U_NDMACHAN; chndx++)
{
dmach = &g_dma[chndx];
sem_init(&dmach->sem, 0, 1);
/* Attach DMA interrupt vectors */
// (void)irq_attach(dmach->irq, sam3u_dmainterrupt);
/* Disable the DMA channel */
sam3u_dmachandisable(dmach);
/* Enable the IRQ at the NVIC (still disabled at the DMA controller) */
// up_enable_irq(dmach->irq);
}
}
/****************************************************************************
* Name: sam3u_dmachannel
*
* Description:
* Allocate a DMA channel. This function gives the caller mutually
* exclusive access to the DMA channel specified by the 'chndx' argument.
* DMA channels are shared on the SAM3U: Devices sharing the same DMA
* channel cannot do DMA concurrently! See the DMACHAN_* definitions in
* sam3u_dma.h.
*
* If the DMA channel is not available, then sam3u_dmachannel() will wait
* until the holder of the channel relinquishes the channel by calling
* sam3u_dmafree(). WARNING: If you have two devices sharing a DMA
* channel and the code never releases the channel, the sam3u_dmachannel
* call for the other will hang forever in this function! Don't let your
* design do that!
*
* Hmm.. I suppose this interface could be extended to make a non-blocking
* version. Feel free to do that if that is what you need.
*
* Returned Value:
* Provided that 'chndx' is valid, this function ALWAYS returns a non-NULL,
* void* DMA channel handle. (If 'chndx' is invalid, the function will
* assert if debug is enabled or do something ignorant otherwise).
*
* Assumptions:
* - The caller does not hold he DMA channel.
* - The caller can wait for the DMA channel to be freed if it is no
* available.
*
****************************************************************************/
DMA_HANDLE sam3u_dmachannel(int chndx)
{
struct sam3u_dma_s *dmach = &g_dma[chndx];
DEBUGASSERT(chndx < CONFIG_SAM3U_NDMACHAN);
/* Get exclusive access to the DMA channel -- OR wait until the channel
* is available if it is currently being used by another driver
*/
sam3u_dmatake(dmach);
/* The caller now has exclusive use of the DMA channel */
return (DMA_HANDLE)dmach;
}
/****************************************************************************
* Name: sam3u_dmafree
*
* Description:
* Release a DMA channel. If another thread is waiting for this DMA channel
* in a call to sam3u_dmachannel, then this function will re-assign the
* DMA channel to that thread and wake it up. NOTE: The 'handle' used
* in this argument must NEVER be used again until sam3u_dmachannel() is
* called again to re-gain access to the channel.
*
* Returned Value:
* None
*
* Assumptions:
* - The caller holds the DMA channel.
* - There is no DMA in progress
*
****************************************************************************/
void sam3u_dmafree(DMA_HANDLE handle)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
DEBUGASSERT(handle != NULL);
/* Release the channel */
sam3u_dmagive(dmach);
}
/****************************************************************************
* Name: sam3u_dmasetup
*
* Description:
* Configure DMA before using
*
****************************************************************************/
void sam3u_dmasetup(DMA_HANDLE handle, uint32_t paddr, uint32_t maddr, size_t ntransfers, uint32_t ccr)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
uint32_t regval;
# warning "Missing logic"
}
/****************************************************************************
* Name: sam3u_dmastart
*
* Description:
* Start the DMA transfer
*
* Assumptions:
* - DMA handle allocated by sam3u_dmachannel()
* - No DMA in progress
*
****************************************************************************/
void sam3u_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg, bool half)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
DEBUGASSERT(handle != NULL);
/* Save the callback info. This will be invoked whent the DMA commpletes */
dmach->callback = callback;
dmach->arg = arg;
# warning "Missing logic"
}
/****************************************************************************
* Name: sam3u_dmastop
*
* Description:
* Cancel the DMA. After sam3u_dmastop() is called, the DMA channel is
* reset and sam3u_dmasetup() must be called before sam3u_dmastart() can be
* called again
*
* Assumptions:
* - DMA handle allocated by sam3u_dmachannel()
*
****************************************************************************/
void sam3u_dmastop(DMA_HANDLE handle)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
sam3u_dmachandisable(dmach);
}
/****************************************************************************
* Name: sam3u_dmasample
*
* Description:
* Sample DMA register contents
*
* Assumptions:
* - DMA handle allocated by sam3u_dmachannel()
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
void sam3u_dmasample(DMA_HANDLE handle, struct sam3u_dmaregs_s *regs)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
irqstate_t flags;
/* Sample global registers */
flags = irqsave();
regs->gcfg = getreg32(SAM3U_DMAC_GCFG);
regs->en = getreg32(SAM3U_DMAC_EN);
regs->sreq = getreg32(SAM3U_DMAC_SREQ);
regs->creq = getreg32(SAM3U_DMAC_CREQ);
regs->last = getreg32(SAM3U_DMAC_LAST);
regs->ebcimr = getreg32(SAM3U_DMAC_EBCIMR);
regs->ebcisr = getreg32(SAM3U_DMAC_EBCISR);
regs->chsr = getreg32(SAM3U_DMAC_CHSR);
/* Sample channel registers */
regs->saddr = getreg32(dmach->base + SAM3U_DMACHAN_SADDR_OFFSET);
regs->daddr = getreg32(dmach->base + SAM3U_DMACHAN_DADDR_OFFSET);
regs->dscr = getreg32(dmach->base + SAM3U_DMACHAN_DSCR_OFFSET);
regs->ctrla = getreg32(dmach->base + SAM3U_DMACHAN_CTRLA_OFFSET);
regs->ctrlb = getreg32(dmach->base + SAM3U_DMACHAN_CTRLB_OFFSET);
regs->cfg = getreg32(dmach->base + SAM3U_DMACHAN_CFG_OFFSET);
irqrestore(flags);
}
#endif
/****************************************************************************
* Name: sam3u_dmadump
*
* Description:
* Dump previously sampled DMA register contents
*
* Assumptions:
* - DMA handle allocated by sam3u_dmachannel()
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
void sam3u_dmadump(DMA_HANDLE handle, const struct sam3u_dmaregs_s *regs,
const char *msg)
{
struct sam3u_dma_s *dmach = (struct sam3u_dma_s *)handle;
dmadbg("%s\n", msg);
dmadbg(" DMA Global Registers:\n");
dmadbg(" GCFG[%08x]: %08x\n", SAM3U_DMAC_GCFG, regs->gcfg);
dmadbg(" EN[%08x]: %08x\n", SAM3U_DMAC_EN, regs->en);
dmadbg(" SREQ[%08x]: %08x\n", SAM3U_DMAC_SREQ, regs->sreq);
dmadbg(" CREQ[%08x]: %08x\n", SAM3U_DMAC_CREQ, regs->creq);
dmadbg(" LAST[%08x]: %08x\n", SAM3U_DMAC_LAST, regs->last);
dmadbg(" EBCIMR[%08x]: %08x\n", SAM3U_DMAC_EBCIMR, regs->ebcimr);
dmadbg(" EBCISR[%08x]: %08x\n", SAM3U_DMAC_EBCISR, regs->ebcisr);
dmadbg(" CHSR[%08x]: %08x\n", SAM3U_DMAC_CHSR, regs->chsr);
dmadbg(" DMA Channel Registers:\n");
dmadbg(" SADDR[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_SADDR_OFFSET, regs->saddr);
dmadbg(" DADDR[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_DADDR_OFFSET, regs->daddr);
dmadbg(" DSCR[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_DSCR_OFFSET, regs->dscr);
dmadbg(" CTRLA[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_CTRLA_OFFSET, regs->ctrla);
dmadbg(" CTRLB[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_CTRLB_OFFSET, regs->ctrlb);
dmadbg(" CFG[%08x]: %08x\n", dmach->base + SAM3U_DMACHAN_CFG_OFFSET, regs->cfg);
}
#endif

View File

@ -297,6 +297,31 @@
typedef FAR void *DMA_HANDLE;
typedef void (*dma_callback_t)(DMA_HANDLE handle, uint8_t isr, void *arg);
#ifdef CONFIG_DEBUG_DMA
struct sam3u_dmaregs_s
{
/* Global Registers */
uint32_t gcfg; /* DMAC Global Configuration Register */
uint32_t en; /* DMAC Enable Register */
uint32_t sreq; /* DMAC Software Single Request Register */
uint32_t creq; /* DMAC Software Chunk Transfer Request Register */
uint32_t last; /* DMAC Software Last Transfer Flag Register */
uint32_t ebcimr; /* DMAC Error Mask */
uint32_t ebcisr; /* DMAC Error Status */
uint32_t chsr; /* DMAC Channel Handler Status Register */
/* Channel Registers */
uint32_t saddr; /* DMAC Channel Source Address Register */
uint32_t daddr; /* DMAC Channel Destination Address Register */
uint32_t dscr; /* DMAC Channel Descriptor Address Register */
uint32_t ctrla; /* DMAC Channel Control A Register */
uint32_t ctrlb; /* DMAC Channel Control B Register */
uint32_t cfg; /* DMAC Channel Configuration Register */
};
#endif
/************************************************************************************
* Inline Functions
************************************************************************************/
@ -511,6 +536,42 @@ EXTERN void sam3u_dmastart(DMA_HANDLE handle, dma_callback_t callback,
EXTERN void sam3u_dmastop(DMA_HANDLE handle);
/****************************************************************************
* Name: sam3u_dmasample
*
* Description:
* Sample DMA register contents
*
* Assumptions:
* - DMA handle allocated by sam3u_dmachannel()
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
EXTERN void sam3u_dmasample(DMA_HANDLE handle, struct sam3u_dmaregs_s *regs);
#else
# define sam3u_dmasample(handle,regs)
#endif
/****************************************************************************
* Name: sam3u_dmadump
*
* Description:
* Dump previously sampled DMA register contents
*
* Assumptions:
* - DMA handle allocated by sam3u_dmachannel()
*
****************************************************************************/
#ifdef CONFIG_DEBUG_DMA
EXTERN void sam3u_dmadump(DMA_HANDLE handle, const struct sam3u_dmaregs_s *regs,
const char *msg);
#else
# define sam3u_dmadump(handle,regs,msg)
#endif
#undef EXTERN
#if defined(__cplusplus)
}