SAM4S: Add NSH configuration. Calibrated delay loops. Port now seems fully functional
This commit is contained in:
Gregory Nutt
parent
aafb99850b
commit
c4f903081c
@ -436,6 +436,7 @@ SAM4S Xplained-specific Configuration Options
|
|||||||
CONFIG_SAM34_HSMCI - High Speed Multimedia Card Interface
|
CONFIG_SAM34_HSMCI - High Speed Multimedia Card Interface
|
||||||
CONFIG_SAM34_TWI0 - Two-Wire Interface 0
|
CONFIG_SAM34_TWI0 - Two-Wire Interface 0
|
||||||
CONFIG_SAM34_TWI1 - Two-Wire Interface 1
|
CONFIG_SAM34_TWI1 - Two-Wire Interface 1
|
||||||
|
CONFIG_SAM34_SPI - Serial Peripheral Interface
|
||||||
CONFIG_SAM34_SSC - Synchronous Serial Controller
|
CONFIG_SAM34_SSC - Synchronous Serial Controller
|
||||||
CONFIG_SAM34_TC0 - Timer Counter 0
|
CONFIG_SAM34_TC0 - Timer Counter 0
|
||||||
CONFIG_SAM34_TC1 - Timer Counter 1
|
CONFIG_SAM34_TC1 - Timer Counter 1
|
||||||
@ -555,3 +556,32 @@ Configurations
|
|||||||
2. This configuration is set up to use the NuttX OABI toolchain (see
|
2. This configuration is set up to use the NuttX OABI toolchain (see
|
||||||
above). Of course this can be reconfigured if you prefer a different
|
above). Of course this can be reconfigured if you prefer a different
|
||||||
toolchain.
|
toolchain.
|
||||||
|
|
||||||
|
nsh:
|
||||||
|
This configuration directory will built the NuttShell.
|
||||||
|
|
||||||
|
NOTES:
|
||||||
|
|
||||||
|
1. This configuration provides test output on UART1 which is available
|
||||||
|
on J3 or J4 (see the section "Serial Consoles" above). The
|
||||||
|
virtual COM port could be used, instead, by reconfiguring to use
|
||||||
|
UART0 instead of UART1:
|
||||||
|
|
||||||
|
System Type -> AT91SAM3/4 Peripheral Support
|
||||||
|
CONFIG_SAM_UART0=y
|
||||||
|
CONFIG_SAM_UART1=n
|
||||||
|
|
||||||
|
Device Drivers -> Serial Driver Support -> Serial Console
|
||||||
|
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||||
|
|
||||||
|
Device Drivers -> Serial Driver Support -> USART0 Configuration
|
||||||
|
CONFIG_UART0_2STOP=0
|
||||||
|
CONFIG_UART0_BAUD=115200
|
||||||
|
CONFIG_UART0_BITS=8
|
||||||
|
CONFIG_UART0_PARITY=0
|
||||||
|
CONFIG_UART0_RXBUFSIZE=256
|
||||||
|
CONFIG_UART0_TXBUFSIZE=256
|
||||||
|
|
||||||
|
2. This configuration is set up to use the NuttX OABI toolchain (see
|
||||||
|
above). Of course this can be reconfigured if you prefer a different
|
||||||
|
toolchain.
|
||||||
|
|||||||
@ -166,7 +166,6 @@
|
|||||||
|
|
||||||
#define BOARD_FWS 5
|
#define BOARD_FWS 5
|
||||||
|
|
||||||
|
|
||||||
/* LED definitions ******************************************************************/
|
/* LED definitions ******************************************************************/
|
||||||
/* There are four LEDs on board the SAM4S Xplained board, two of these can be
|
/* There are four LEDs on board the SAM4S Xplained board, two of these can be
|
||||||
* controlled by software in the SAM4S:
|
* controlled by software in the SAM4S:
|
||||||
|
|||||||
109
configs/sam4s-xplained/nsh/Make.defs
Normal file
109
configs/sam4s-xplained/nsh/Make.defs
Normal file
@ -0,0 +1,109 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/sam4s-xplained/nsh/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
include ${TOPDIR}/tools/Config.mk
|
||||||
|
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native toolchains
|
||||||
|
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||||
|
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||||
|
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||||
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||||
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native toolchain
|
||||||
|
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||||
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
|
||||||
|
endif
|
||||||
|
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CXX = $(CROSSDEV)g++
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(CROSSDEV)ar rcs
|
||||||
|
NM = $(CROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||||
|
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCFLAGS = -fno-builtin
|
||||||
|
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHWARNINGSXX = -Wall -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||||
|
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
|
||||||
676
configs/sam4s-xplained/nsh/defconfig
Normal file
676
configs/sam4s-xplained/nsh/defconfig
Normal file
@ -0,0 +1,676 @@
|
|||||||
|
#
|
||||||
|
# Automatically generated file; DO NOT EDIT.
|
||||||
|
# Nuttx/ Configuration
|
||||||
|
#
|
||||||
|
CONFIG_NUTTX_NEWCONFIG=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Setup
|
||||||
|
#
|
||||||
|
# CONFIG_EXPERIMENTAL is not set
|
||||||
|
CONFIG_HOST_LINUX=y
|
||||||
|
# CONFIG_HOST_OSX is not set
|
||||||
|
# CONFIG_HOST_WINDOWS is not set
|
||||||
|
# CONFIG_HOST_OTHER is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_APPS_DIR="../apps"
|
||||||
|
# CONFIG_BUILD_2PASS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Output Formats
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY is not set
|
||||||
|
# CONFIG_INTELHEX_BINARY is not set
|
||||||
|
# CONFIG_MOTOROLA_SREC is not set
|
||||||
|
CONFIG_RAW_BINARY=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Customize Header Files
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_STDBOOL_H is not set
|
||||||
|
# CONFIG_ARCH_MATH_H is not set
|
||||||
|
# CONFIG_ARCH_FLOAT_H is not set
|
||||||
|
# CONFIG_ARCH_STDARG_H is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Debug Options
|
||||||
|
#
|
||||||
|
# CONFIG_DEBUG is not set
|
||||||
|
# CONFIG_DEBUG_SYMBOLS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Type
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_8051 is not set
|
||||||
|
CONFIG_ARCH_ARM=y
|
||||||
|
# CONFIG_ARCH_AVR is not set
|
||||||
|
# CONFIG_ARCH_HC is not set
|
||||||
|
# CONFIG_ARCH_MIPS is not set
|
||||||
|
# CONFIG_ARCH_RGMP is not set
|
||||||
|
# CONFIG_ARCH_SH is not set
|
||||||
|
# CONFIG_ARCH_SIM is not set
|
||||||
|
# CONFIG_ARCH_X86 is not set
|
||||||
|
# CONFIG_ARCH_Z16 is not set
|
||||||
|
# CONFIG_ARCH_Z80 is not set
|
||||||
|
CONFIG_ARCH="arm"
|
||||||
|
|
||||||
|
#
|
||||||
|
# ARM Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||||
|
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_IMX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||||
|
# CONFIG_ARCH_CHIP_KL is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LM is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||||
|
CONFIG_ARCH_CHIP_SAM34=y
|
||||||
|
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||||
|
CONFIG_ARCH_CORTEXM4=y
|
||||||
|
CONFIG_ARCH_FAMILY="armv7-m"
|
||||||
|
CONFIG_ARCH_CHIP="sam34"
|
||||||
|
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||||
|
# CONFIG_ARCH_HAVE_FPU is not set
|
||||||
|
CONFIG_ARCH_HAVE_MPU=y
|
||||||
|
# CONFIG_ARMV7M_MPU is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# ARMV7M Configuration Options
|
||||||
|
#
|
||||||
|
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
|
||||||
|
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
|
||||||
|
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
|
||||||
|
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
|
||||||
|
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# AT91SAM3/4 Configuration Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_CHIP_AT91SAM3U4E is not set
|
||||||
|
# CONFIG_ARCH_CHIP_SAM34_NDMACHANC2C is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4LC4C is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4LC4B is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4LC4A is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4LS2C is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4LS2B is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4LS2A is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4LS4C is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4LS4B is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4LS4A is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4SD32C is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4SD32B is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4SD16C is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4SD16B is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4SA16C is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4SA16B is not set
|
||||||
|
CONFIG_ARCH_CHIP_ATSAM4S16C=y
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4S16B is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4S8C is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAM4S8B is not set
|
||||||
|
# CONFIG_ARCH_CHIP_SAM3U is not set
|
||||||
|
# CONFIG_ARCH_CHIP_SAM4L is not set
|
||||||
|
CONFIG_ARCH_CHIP_SAM4S=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# AT91SAM3/4 Peripheral Support
|
||||||
|
#
|
||||||
|
# CONFIG_SAM34_SPI is not set
|
||||||
|
# CONFIG_SAM34_SSC is not set
|
||||||
|
# CONFIG_SAM34_TC0 is not set
|
||||||
|
# CONFIG_SAM34_TC1 is not set
|
||||||
|
# CONFIG_SAM34_TC2 is not set
|
||||||
|
# CONFIG_SAM34_TC3 is not set
|
||||||
|
# CONFIG_SAM34_TC4 is not set
|
||||||
|
# CONFIG_SAM34_TC5 is not set
|
||||||
|
# CONFIG_SAM34_PWM is not set
|
||||||
|
# CONFIG_SAM34_TWIM0 is not set
|
||||||
|
# CONFIG_SAM34_TWIS0 is not set
|
||||||
|
# CONFIG_SAM34_TWIM1 is not set
|
||||||
|
# CONFIG_SAM34_TWIS1 is not set
|
||||||
|
# CONFIG_SAM34_UART0 is not set
|
||||||
|
CONFIG_SAM34_UART1=y
|
||||||
|
# CONFIG_SAM34_USART0 is not set
|
||||||
|
# CONFIG_SAM34_USART1 is not set
|
||||||
|
# CONFIG_SAM34_ADC12B is not set
|
||||||
|
# CONFIG_SAM34_DACC is not set
|
||||||
|
# CONFIG_SAM34_ACC is not set
|
||||||
|
# CONFIG_SAM34_SMC is not set
|
||||||
|
# CONFIG_SAM34_PDCA is not set
|
||||||
|
# CONFIG_SAM34_CRCCU is not set
|
||||||
|
# CONFIG_SAM34_UDP is not set
|
||||||
|
# CONFIG_SAM34_RTC is not set
|
||||||
|
# CONFIG_SAM34_RTT is not set
|
||||||
|
# CONFIG_SAM34_WDT is not set
|
||||||
|
# CONFIG_SAM34_HSMCI is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# AT91SAM3/4 USART Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# AT91SAM3/4 GPIO Interrupt Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_GPIOA_IRQ is not set
|
||||||
|
# CONFIG_GPIOB_IRQ is not set
|
||||||
|
# CONFIG_GPIOC_IRQ is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# External Memory Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_NOINTC is not set
|
||||||
|
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||||
|
# CONFIG_ARCH_DMA is not set
|
||||||
|
CONFIG_ARCH_IRQPRIO=y
|
||||||
|
# CONFIG_CUSTOM_STACK is not set
|
||||||
|
# CONFIG_ADDRENV is not set
|
||||||
|
CONFIG_ARCH_HAVE_VFORK=y
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
# CONFIG_ENDIAN_BIG is not set
|
||||||
|
CONFIG_ARCH_HAVE_RAMFUNCS=y
|
||||||
|
CONFIG_ARCH_RAMFUNCS=y
|
||||||
|
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||||
|
# CONFIG_ARCH_RAMVECTORS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Settings
|
||||||
|
#
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=9186
|
||||||
|
# CONFIG_ARCH_CALIBRATION is not set
|
||||||
|
CONFIG_DRAM_START=0x20000000
|
||||||
|
CONFIG_DRAM_SIZE=131072
|
||||||
|
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Boot options
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||||
|
CONFIG_BOOT_RUNFROMFLASH=y
|
||||||
|
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||||
|
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||||
|
# CONFIG_BOOT_COPYTORAM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Selection
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_BOARD_SAM4S_XPLAINED=y
|
||||||
|
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||||
|
CONFIG_ARCH_BOARD="sam4s-xplained"
|
||||||
|
|
||||||
|
#
|
||||||
|
# Common Board Options
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_HAVE_LEDS=y
|
||||||
|
CONFIG_ARCH_LEDS=y
|
||||||
|
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||||
|
CONFIG_ARCH_BUTTONS=y
|
||||||
|
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||||
|
# CONFIG_ARCH_IRQBUTTONS is not set
|
||||||
|
CONFIG_NSH_MMCSDMINOR=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board-Specific Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# RTOS Features
|
||||||
|
#
|
||||||
|
# CONFIG_BOARD_INITIALIZE is not set
|
||||||
|
CONFIG_MSEC_PER_TICK=10
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||||
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
|
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||||
|
# CONFIG_JULIAN_TIME is not set
|
||||||
|
CONFIG_START_YEAR=2013
|
||||||
|
CONFIG_START_MONTH=6
|
||||||
|
CONFIG_START_DAY=12
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
# CONFIG_MUTEX_TYPES is not set
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||||
|
# CONFIG_FDCLONE_DISABLE is not set
|
||||||
|
# CONFIG_FDCLONE_STDIO is not set
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
# CONFIG_SCHED_WAITPID is not set
|
||||||
|
# CONFIG_SCHED_STARTHOOK is not set
|
||||||
|
# CONFIG_SCHED_ATEXIT is not set
|
||||||
|
# CONFIG_SCHED_ONEXIT is not set
|
||||||
|
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||||
|
CONFIG_DISABLE_OS_API=y
|
||||||
|
# CONFIG_DISABLE_CLOCK is not set
|
||||||
|
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||||
|
# CONFIG_DISABLE_PTHREAD is not set
|
||||||
|
# CONFIG_DISABLE_SIGNALS is not set
|
||||||
|
# CONFIG_DISABLE_MQUEUE is not set
|
||||||
|
CONFIG_DISABLE_ENVIRON=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Signal Numbers
|
||||||
|
#
|
||||||
|
CONFIG_SIG_SIGUSR1=1
|
||||||
|
CONFIG_SIG_SIGUSR2=2
|
||||||
|
CONFIG_SIG_SIGALARM=3
|
||||||
|
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sizes of configurable things (0 disables)
|
||||||
|
#
|
||||||
|
CONFIG_MAX_TASKS=16
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_NPTHREAD_KEYS=4
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=8
|
||||||
|
CONFIG_NFILE_STREAMS=8
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=4
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=32
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=4
|
||||||
|
CONFIG_PREALLOC_TIMERS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=2048
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||||
|
|
||||||
|
#
|
||||||
|
# Device Drivers
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_POLL=y
|
||||||
|
CONFIG_DEV_NULL=y
|
||||||
|
# CONFIG_DEV_ZERO is not set
|
||||||
|
# CONFIG_LOOP is not set
|
||||||
|
# CONFIG_RAMDISK is not set
|
||||||
|
# CONFIG_CAN is not set
|
||||||
|
# CONFIG_PWM is not set
|
||||||
|
# CONFIG_I2C is not set
|
||||||
|
# CONFIG_SPI is not set
|
||||||
|
# CONFIG_RTC is not set
|
||||||
|
# CONFIG_WATCHDOG is not set
|
||||||
|
# CONFIG_ANALOG is not set
|
||||||
|
# CONFIG_AUDIO_DEVICES is not set
|
||||||
|
# CONFIG_BCH is not set
|
||||||
|
# CONFIG_INPUT is not set
|
||||||
|
# CONFIG_LCD is not set
|
||||||
|
# CONFIG_MMCSD is not set
|
||||||
|
# CONFIG_MTD is not set
|
||||||
|
# CONFIG_PIPES is not set
|
||||||
|
# CONFIG_PM is not set
|
||||||
|
# CONFIG_POWER is not set
|
||||||
|
# CONFIG_SENSORS is not set
|
||||||
|
CONFIG_SERIAL=y
|
||||||
|
# CONFIG_DEV_LOWCONSOLE is not set
|
||||||
|
# CONFIG_16550_UART is not set
|
||||||
|
CONFIG_ARCH_HAVE_UART1=y
|
||||||
|
CONFIG_MCU_SERIAL=y
|
||||||
|
CONFIG_STANDARD_SERIAL=y
|
||||||
|
CONFIG_UART1_SERIAL_CONSOLE=y
|
||||||
|
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# UART1 Configuration
|
||||||
|
#
|
||||||
|
CONFIG_UART1_RXBUFSIZE=256
|
||||||
|
CONFIG_UART1_TXBUFSIZE=256
|
||||||
|
CONFIG_UART1_BAUD=115200
|
||||||
|
CONFIG_UART1_BITS=8
|
||||||
|
CONFIG_UART1_PARITY=0
|
||||||
|
CONFIG_UART1_2STOP=0
|
||||||
|
# CONFIG_UART1_IFLOWCONTROL is not set
|
||||||
|
# CONFIG_UART1_OFLOWCONTROL is not set
|
||||||
|
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||||
|
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||||
|
# CONFIG_USBDEV is not set
|
||||||
|
# CONFIG_USBHOST is not set
|
||||||
|
# CONFIG_WIRELESS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging Device Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_RAMLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Support
|
||||||
|
#
|
||||||
|
# CONFIG_NET is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# File Systems
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# File system configuration
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_MOUNTPOINT=y
|
||||||
|
# CONFIG_FS_RAMMAP is not set
|
||||||
|
# CONFIG_FS_BINFS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_SYSLOG_ENABLE is not set
|
||||||
|
# CONFIG_SYSLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics Support
|
||||||
|
#
|
||||||
|
# CONFIG_NX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Memory Management
|
||||||
|
#
|
||||||
|
# CONFIG_MM_MULTIHEAP is not set
|
||||||
|
# CONFIG_MM_SMALL is not set
|
||||||
|
CONFIG_MM_REGIONS=3
|
||||||
|
# CONFIG_GRAN is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Audio Support
|
||||||
|
#
|
||||||
|
# CONFIG_AUDIO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Formats
|
||||||
|
#
|
||||||
|
# CONFIG_BINFMT_DISABLE is not set
|
||||||
|
# CONFIG_NXFLAT is not set
|
||||||
|
# CONFIG_ELF is not set
|
||||||
|
CONFIG_BUILTIN=y
|
||||||
|
# CONFIG_PIC is not set
|
||||||
|
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Library Routines
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Standard C Library Options
|
||||||
|
#
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=64
|
||||||
|
CONFIG_STDIO_LINEBUFFER=y
|
||||||
|
CONFIG_NUNGET_CHARS=2
|
||||||
|
# CONFIG_LIBM is not set
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||||
|
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||||
|
CONFIG_LIB_RAND_ORDER=1
|
||||||
|
# CONFIG_EOL_IS_CR is not set
|
||||||
|
# CONFIG_EOL_IS_LF is not set
|
||||||
|
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||||
|
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||||
|
# CONFIG_LIBC_EXECFUNCS is not set
|
||||||
|
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||||
|
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||||
|
# CONFIG_LIBC_STRERROR is not set
|
||||||
|
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||||
|
# CONFIG_ARCH_ROMGETC is not set
|
||||||
|
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Non-standard Library Support
|
||||||
|
#
|
||||||
|
# CONFIG_SCHED_WORKQUEUE is not set
|
||||||
|
# CONFIG_LIB_KBDCODEC is not set
|
||||||
|
# CONFIG_LIB_SLCDCODEC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Basic CXX Support
|
||||||
|
#
|
||||||
|
# CONFIG_C99_BOOL8 is not set
|
||||||
|
CONFIG_HAVE_CXX=y
|
||||||
|
CONFIG_HAVE_CXXINITIALIZE=y
|
||||||
|
CONFIG_CXX_NEWLONG=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# uClibc++ Standard C++ Library
|
||||||
|
#
|
||||||
|
# CONFIG_UCLIBCXX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Application Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Built-In Applications
|
||||||
|
#
|
||||||
|
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||||
|
|
||||||
|
#
|
||||||
|
# Examples
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||||
|
# CONFIG_EXAMPLES_CAN is not set
|
||||||
|
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||||
|
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_DHCPD is not set
|
||||||
|
# CONFIG_EXAMPLES_ELF is not set
|
||||||
|
# CONFIG_EXAMPLES_FTPC is not set
|
||||||
|
# CONFIG_EXAMPLES_FTPD is not set
|
||||||
|
# CONFIG_EXAMPLES_HELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||||
|
# CONFIG_EXAMPLES_JSON is not set
|
||||||
|
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||||
|
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_IGMP is not set
|
||||||
|
# CONFIG_EXAMPLES_LCDRW is not set
|
||||||
|
# CONFIG_EXAMPLES_MM is not set
|
||||||
|
# CONFIG_EXAMPLES_MODBUS is not set
|
||||||
|
# CONFIG_EXAMPLES_MOUNT is not set
|
||||||
|
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||||
|
CONFIG_EXAMPLES_NSH=y
|
||||||
|
# CONFIG_EXAMPLES_NULL is not set
|
||||||
|
# CONFIG_EXAMPLES_NX is not set
|
||||||
|
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||||
|
# CONFIG_EXAMPLES_NXFFS is not set
|
||||||
|
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||||
|
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||||
|
# CONFIG_EXAMPLES_NXLINES is not set
|
||||||
|
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||||
|
# CONFIG_EXAMPLES_OSTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_PIPE is not set
|
||||||
|
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||||
|
# CONFIG_EXAMPLES_QENCODER is not set
|
||||||
|
# CONFIG_EXAMPLES_RGMP is not set
|
||||||
|
# CONFIG_EXAMPLES_ROMFS is not set
|
||||||
|
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||||
|
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||||
|
# CONFIG_EXAMPLES_SLCD is not set
|
||||||
|
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||||
|
# CONFIG_EXAMPLES_SMART is not set
|
||||||
|
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||||
|
# CONFIG_EXAMPLES_TELNETD is not set
|
||||||
|
# CONFIG_EXAMPLES_THTTPD is not set
|
||||||
|
# CONFIG_EXAMPLES_TIFF is not set
|
||||||
|
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||||
|
# CONFIG_EXAMPLES_UDP is not set
|
||||||
|
# CONFIG_EXAMPLES_UIP is not set
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||||
|
# CONFIG_EXAMPLES_USBMSC is not set
|
||||||
|
# CONFIG_EXAMPLES_USBTERM is not set
|
||||||
|
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics Support
|
||||||
|
#
|
||||||
|
# CONFIG_TIFF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Interpreters
|
||||||
|
#
|
||||||
|
# CONFIG_INTERPRETERS_FICL is not set
|
||||||
|
# CONFIG_INTERPRETERS_PCODE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Network Utilities
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Utilities
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_CODECS is not set
|
||||||
|
# CONFIG_NETUTILS_DHCPC is not set
|
||||||
|
# CONFIG_NETUTILS_DHCPD is not set
|
||||||
|
# CONFIG_NETUTILS_FTPC is not set
|
||||||
|
# CONFIG_NETUTILS_FTPD is not set
|
||||||
|
# CONFIG_NETUTILS_JSON is not set
|
||||||
|
# CONFIG_NETUTILS_RESOLV is not set
|
||||||
|
# CONFIG_NETUTILS_SMTP is not set
|
||||||
|
# CONFIG_NETUTILS_TELNETD is not set
|
||||||
|
# CONFIG_NETUTILS_TFTPC is not set
|
||||||
|
# CONFIG_NETUTILS_THTTPD is not set
|
||||||
|
# CONFIG_NETUTILS_UIPLIB is not set
|
||||||
|
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FreeModBus
|
||||||
|
#
|
||||||
|
# CONFIG_MODBUS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NSH Library
|
||||||
|
#
|
||||||
|
CONFIG_NSH_LIBRARY=y
|
||||||
|
CONFIG_NSH_BUILTIN_APPS=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Disable Individual commands
|
||||||
|
#
|
||||||
|
# CONFIG_NSH_DISABLE_CAT is not set
|
||||||
|
# CONFIG_NSH_DISABLE_CD is not set
|
||||||
|
# CONFIG_NSH_DISABLE_CP is not set
|
||||||
|
# CONFIG_NSH_DISABLE_DD is not set
|
||||||
|
# CONFIG_NSH_DISABLE_ECHO is not set
|
||||||
|
# CONFIG_NSH_DISABLE_EXEC is not set
|
||||||
|
# CONFIG_NSH_DISABLE_EXIT is not set
|
||||||
|
# CONFIG_NSH_DISABLE_FREE is not set
|
||||||
|
# CONFIG_NSH_DISABLE_GET is not set
|
||||||
|
# CONFIG_NSH_DISABLE_HELP is not set
|
||||||
|
# CONFIG_NSH_DISABLE_HEXDUMP is not set
|
||||||
|
# CONFIG_NSH_DISABLE_IFCONFIG is not set
|
||||||
|
# CONFIG_NSH_DISABLE_KILL is not set
|
||||||
|
# CONFIG_NSH_DISABLE_LOSETUP is not set
|
||||||
|
# CONFIG_NSH_DISABLE_LS is not set
|
||||||
|
# CONFIG_NSH_DISABLE_MB is not set
|
||||||
|
# CONFIG_NSH_DISABLE_MKDIR is not set
|
||||||
|
# CONFIG_NSH_DISABLE_MKFATFS is not set
|
||||||
|
# CONFIG_NSH_DISABLE_MKFIFO is not set
|
||||||
|
# CONFIG_NSH_DISABLE_MKRD is not set
|
||||||
|
# CONFIG_NSH_DISABLE_MH is not set
|
||||||
|
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||||
|
# CONFIG_NSH_DISABLE_MW is not set
|
||||||
|
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
|
||||||
|
# CONFIG_NSH_DISABLE_PS is not set
|
||||||
|
# CONFIG_NSH_DISABLE_PING is not set
|
||||||
|
# CONFIG_NSH_DISABLE_PUT is not set
|
||||||
|
# CONFIG_NSH_DISABLE_PWD is not set
|
||||||
|
# CONFIG_NSH_DISABLE_RM is not set
|
||||||
|
# CONFIG_NSH_DISABLE_RMDIR is not set
|
||||||
|
# CONFIG_NSH_DISABLE_SET is not set
|
||||||
|
# CONFIG_NSH_DISABLE_SH is not set
|
||||||
|
# CONFIG_NSH_DISABLE_SLEEP is not set
|
||||||
|
# CONFIG_NSH_DISABLE_TEST is not set
|
||||||
|
# CONFIG_NSH_DISABLE_UMOUNT is not set
|
||||||
|
# CONFIG_NSH_DISABLE_UNSET is not set
|
||||||
|
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||||
|
# CONFIG_NSH_DISABLE_WGET is not set
|
||||||
|
# CONFIG_NSH_DISABLE_XD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Configure Command Options
|
||||||
|
#
|
||||||
|
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||||
|
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||||
|
CONFIG_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_NSH_LINELEN=80
|
||||||
|
CONFIG_NSH_MAXARGUMENTS=6
|
||||||
|
CONFIG_NSH_NESTDEPTH=3
|
||||||
|
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||||
|
# CONFIG_NSH_DISABLEBG is not set
|
||||||
|
CONFIG_NSH_CONSOLE=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Trace Support
|
||||||
|
#
|
||||||
|
# CONFIG_NSH_CONDEV is not set
|
||||||
|
# CONFIG_NSH_ARCHINIT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NxWidgets/NxWM
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# System NSH Add-Ons
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Custom Free Memory Command
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_FREE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# I2C tool
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# FLASH Program Installation
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_INSTALL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FLASH Erase-all Command
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# readline()
|
||||||
|
#
|
||||||
|
CONFIG_SYSTEM_READLINE=y
|
||||||
|
CONFIG_READLINE_ECHO=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Power Off
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_POWEROFF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAMTRON
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_RAMTRON is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SD Card
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SDCARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sysinfo
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SYSINFO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Monitor
|
||||||
|
#
|
||||||
63
configs/sam4s-xplained/nsh/setenv.sh
Executable file
63
configs/sam4s-xplained/nsh/setenv.sh
Executable file
@ -0,0 +1,63 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/sam4s-xplained/nsh/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
|
||||||
|
if [ "$_" = "$0" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
if [ ! -x "setenv.sh" ]; then
|
||||||
|
echo "This script must be executed from the top-level NuttX build directory"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then
|
||||||
|
export PATH_ORIG="${PATH}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||||
|
# toolchain under windows. You will also have to edit this if you install
|
||||||
|
# the CodeSourcery toolchain in any other location
|
||||||
|
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I build the buildroot
|
||||||
|
# toolchain.
|
||||||
|
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||||
|
|
||||||
|
# Add the path to the toolchain to the PATH varialble
|
||||||
|
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
@ -189,7 +189,7 @@ CONFIG_ARCH_HAVE_RAMVECTORS=y
|
|||||||
#
|
#
|
||||||
# Board Settings
|
# Board Settings
|
||||||
#
|
#
|
||||||
CONFIG_BOARD_LOOPSPERMSEC=4768
|
CONFIG_BOARD_LOOPSPERMSEC=9186
|
||||||
# CONFIG_ARCH_CALIBRATION is not set
|
# CONFIG_ARCH_CALIBRATION is not set
|
||||||
CONFIG_DRAM_START=0x20000000
|
CONFIG_DRAM_START=0x20000000
|
||||||
CONFIG_DRAM_SIZE=131072
|
CONFIG_DRAM_SIZE=131072
|
||||||
@ -319,7 +319,6 @@ CONFIG_DEV_LOWCONSOLE=y
|
|||||||
# CONFIG_16550_UART is not set
|
# CONFIG_16550_UART is not set
|
||||||
CONFIG_ARCH_HAVE_UART1=y
|
CONFIG_ARCH_HAVE_UART1=y
|
||||||
CONFIG_MCU_SERIAL=y
|
CONFIG_MCU_SERIAL=y
|
||||||
# CONFIG_USART0_SERIAL_CONSOLE is not set
|
|
||||||
CONFIG_UART1_SERIAL_CONSOLE=y
|
CONFIG_UART1_SERIAL_CONSOLE=y
|
||||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||||
|
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user