Prep vor 0.4.5 release

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1714 42af7a65-404d-4744-a932-0658087f49c3

ChangeLog

@@ -681,7 +681,7 @@
 	in this release and, hence, most likely have problems.  I don't have the correct network
 	network setup to perform that testing now (I'm in a hotel).
 
-0.4.5 2009-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+0.4.5 2009-04-19 Gregory Nutt <spudmonkey@racsa.co.cr>
 
 	* Add an enumeration argument to the SPI chip select and status methods so
 	  that the interface can handle more than one device.
@@ -694,3 +694,8 @@
 	* Add support for the Freescale i.MX1/L architecture and a configuration for
 	  the Freescale MX1ADS development board.
 	* examples/helloxx: Added a simple C++ hello world example
+	* include/css: Added std header files
+	* libxx: New C++-only directory provides support for minimal C++ applications
+
+0.4.6 2009-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+

Documentation/NuttX.html

@@ -671,8 +671,8 @@
   </tr>
 </table>
 
-<p><b>nuttx-0.4.4</b>.
+<p><b>nuttx-0.4.5</b>.
-  The 36<sup>th</sup> release of NuttX (nuttx-0.4.4) is available for download
+  The 37<sup>th</sup> release of NuttX (nuttx-0.4.5) is available for download
   from the <a href="http://sourceforge.net/project/showfiles.php?group_id=189573">SourceForge</a>
   website.
   The change log associated with the release is available <a href="#currentrelease">here</a>.
@@ -680,22 +680,26 @@
   These unreleased changes are listed <a href="#pendingchanges">here</a>.
 </p>
 <p>
-  This release focuses on bugfixes and extending and verifying certain networking features:
+  This release focuses on a few new features.
   <ul>
     <li>
-      Important bugs were fixed in NSH, UDP checksum calculation, UDP bind()
+      The basic port for the FreeScale ARM920T i.MX1 processor on the
-      behavior for port==0, the eZ80Acclaim! EMAC driver, Z80 interrupt handling,
+      Freescale MX1ADS board.  Coding is complete for this port, but it is
-      and in the C libraries.
+      has not yet fully integrated.
     </li>
     <li>
-      Testing was extended to further verify the tiny webserver, DHCPD, wget(),
+      Extended I2C and SPI interface definitions
-      and sendmail.
+    </li>
+    <li>
+      Add basic support for C++ applications.  Very simple C++ applications
+      can now be built against NuttX without any external libraries.  At
+      present, only the most primitive C++ programs are supported, but it
+      is hoped that this support will be extended in future releases.
     </li>
   </ul>
 </p>
 <p>
-  These changes were verified only on the ZiLOG eZ80910200zcog-d board using the
+  See the Changelog for a detailed description of these changes.
-  ZDS-II toolchain in Cygwin-based environment. Please report any errors to me.
 </p>
 
 <table width ="100%">
@@ -1318,33 +1322,21 @@ Other memory:
 </table>
 
 <pre><ul>
-nuttx-0.4.4 2009-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
+nuttx-0.4.5 2009-04-19 Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
 
-	* examples/nsh:  A debug option was left on that can (and does) cause
+	* Add an enumeration argument to the SPI chip select and status methods so
-	  infinite loops and stack overflows.
+	  that the interface can handle more than one device.
-	* net/uip: Correct calculation of checksum on ICMP ping response.
+	* eZ80Acclaim!: Add a generic SPI driver for all eZ80 boards.
-	* examples/dchpd: Added a tiny DHCP server example
+	* Add a setmode() method to the SPI interface to handle parts with differing
-	* net/uip: Correct UDP bind behavior.  It should select a valid port number
+	  mode requirements.
-	  if it receives a port number of zero.
+	* include/nuttx/i2c.h: Defined a standard I2C interface
-	* netutils/dhcpd:  Corrrect for ZDS compiler.  Fix issue with re-use of a
+	* eZ80Acclaim!: Add an I2C driver.
-	  port number.  Fixed a number of broadcast-related problems.
+	* eZ8Encore!: Add an I2C driver.
-	* eZ80Acclaim!: Add a tiny webserver configuration
+	* Add support for the Freescale i.MX1/L architecture and a configuration for
-	* eZ80Acclaim!: Fixed an important bug in the EMAC Tx timeout logic. It was
+	  the Freescale MX1ADS development board.
-	  always timing out when the load was heavy and worse, for some reason,
+	* examples/helloxx: Added a simple C++ hello world example
-	  resetting the Tx function caused unexpected registers to be reset in
+	* include/css: Added std header files
-	  the Rcv function was well.
+	* libxx: New C++-only directory provides support for minimal C++ applications
-	* Z80: Patch incorported: &quot;[2696648] Z80: interrupt flag stored in parity bit&quot;
-	  (submitted by JPelletier).  The is the same fix that was needed for the
-	  eZ80 and fixed in 0.4.2.
-	* netutils: Added logic to support a simple wget() function
-	* examples/wget: Added a test for wget() (untested -- see NOTE)
-	* lib/strncasecmp: Fix cut'n'paste error in function name.
-	* NSH: Added wget command (untested -- see NOTE).
-	* examples/sendmail: A simple sendmail example (untested -- see NOTE)
-
-	NOTE: Features related to wget and sendmail are not tested on the target platform
-	in this release and, hence, most likely have problems.  I don't have the correct network
-	network setup to perform that testing now (I'm in a hotel).
 
 pascal-0.1.2 2008-02-10 Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
 
@@ -1375,19 +1367,7 @@ buildroot-0.1.3 2009-02-28 &lt;spudmonkey@racsa.co.cr&gt;
 </table>
 
 <pre><ul>
-nuttx-0.4.5 2009-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
+nuttx-0.4.6 2009-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
-
-	* Add an enumeration argument to the SPI chip select and status methods so
-	  that the interface can handle more than one device.
-	* eZ80Acclaim!: Add a generic SPI driver for all eZ80 boards.
-	* Add a setmode() method to the SPI interface to handle parts with differing
-	  mode requirements.
-	* include/nuttx/i2c.h: Defined a standard I2C interface
-	* eZ80Acclaim!: Add an I2C driver.
-	* eZ8Encore!: Add an I2C driver.
-	* Add support for the Freescale i.MX1/L architecture and a configuration for
-	  the Freescale MX1ADS development board.
-	* examples/helloxx: Added a simple C++ hello world example
 
 pascal-0.1.3 2009-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
 

ReleaseNotes

@@ -847,4 +847,20 @@ ZDS-II toolchain in Cygwin-based environment. Please report any errors to me.
 
 This tarball contains a complete CVS snapshot from March 29, 2009.
 
+nuttx-0.4.4
+^^^^^^^^^^^
 
+This is the 37th release of NuttX.  This release focuses on a few new features.
+
+	* The basic port for the FreeScale ARM920T i.MX1 processor on the
+	  Freescale MX1ADS board.  Coding is complete for this port, but it is
+	  has not yet fully integrated
+	* Extended I2C and SPI interface definitions
+	* Add basic support for C++ applications.  Very simple C++ applications
+	  can now be built against NuttX without any external libraries.  At
+	  present, only the most primitive C++ programs are supported, but it
+	  is hoped that this support will be extended in future releases.
+
+See the Changelog for a detailed description of these changes.
+
+This tarball contains a complete CVS snapshot from April 19, 2009.