From c6f0dd9ae6890e65b963dd3fe9c16385070a5144 Mon Sep 17 00:00:00 2001 From: patacongo Date: Tue, 11 Dec 2012 21:42:15 +0000 Subject: [PATCH] configs/p112: Add a configuration for the Z180 P112 board git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5429 42af7a65-404d-4744-a932-0658087f49c3 --- configs/Kconfig | 28 ++ configs/README.txt | 27 +- configs/p112/Kconfig | 4 + configs/p112/README.txt | 26 ++ configs/p112/include/board.h | 60 ++++ configs/p112/ostest/Make.defs | 167 ++++++++++ configs/p112/ostest/defconfig | 530 ++++++++++++++++++++++++++++++++ configs/p112/ostest/setenv.bat | 50 +++ configs/p112/scripts/setenv.bat | 50 +++ configs/p112/scripts/setenv.sh | 66 ++++ configs/p112/src/Makefile | 77 +++++ configs/z80sim/src/Makefile | 2 +- 12 files changed, 1083 insertions(+), 4 deletions(-) create mode 100644 configs/p112/Kconfig create mode 100644 configs/p112/README.txt create mode 100644 configs/p112/include/board.h create mode 100644 configs/p112/ostest/Make.defs create mode 100644 configs/p112/ostest/defconfig create mode 100644 configs/p112/ostest/setenv.bat create mode 100644 configs/p112/scripts/setenv.bat create mode 100755 configs/p112/scripts/setenv.sh create mode 100644 configs/p112/src/Makefile diff --git a/configs/Kconfig b/configs/Kconfig index 50e1cc6007..bba1444c4d 100644 --- a/configs/Kconfig +++ b/configs/Kconfig @@ -346,6 +346,33 @@ config ARCH_BOARD_OLIMEX_STM32P107 Linux or Cygwin. See the http://www.olimex.com for further information. This board features the STMicro STM32F107VC MCU +config ARCH_BOARD_P112 + bool "P112 Z180-based platform" + depends on ARCH_CHIP_Z8018216FSG + ---help--- + The P112 is notable because it was the first of the hobbyist single board + computers to reach the production stage. The P112 hobbyist computers + were relatively widespread and inspired other hobbyist centered home brew + computing projects such as N8VEM home brew computing project. The P112 + project still maintains many devoted enthusiasts and has an online + repository of software and other information. + + The P112 computer originated as a commercial product of "D-X Designs Pty + Ltd" of Australia. They describe the computer as "The P112 is a stand-alone + 8-bit CPU board. Typically running CP/M (tm) or a similar operating system, + it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial, + parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor. + Powered solely from 5V, it draws 150mA (nominal: not including disk drives) + with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible." + + The P112 board was last available new in 1996 by Dave Brooks. In late 2004 + on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112 + boards was discussed. David Griffith decided to produce additional P112 kits + with Dave Brooks blessing and the assistance of others. In addition Terry + Gulczynski makes additional P112 derivative hobbyist home brew computers. + Hal Bower was very active in the mid 1990's on the P112 project and ported + the "Banked/Portable BIOS". + config ARCH_BOARD_PCBLOGICPIC32MX bool "PIC32MX board from PCB Logic Design Co" depends on ARCH_CHIP_PIC32MX460F512L @@ -647,6 +674,7 @@ config ARCH_BOARD default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378 default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107 default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711 + default "p112" if ARCH_BOARD_P112 default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT default "pic32mx7mmb" if ARCH_BOARD_PIC32_PIC32MX7MMB diff --git a/configs/README.txt b/configs/README.txt index 23f5e4380d..e7f73f945d 100644 --- a/configs/README.txt +++ b/configs/README.txt @@ -1780,14 +1780,36 @@ configs/pcblogic-pic32mx STATUS: Code complete but testing has been stalled due to tool related problems (PICkit 2 does not work with the PIC32). -configs/pic32-starterkit +configs/p112 + The P112 is notable because it was the first of the hobbyist single board + computers to reach the production stage. The P112 hobbyist computers + were relatively widespread and inspired other hobbyist centered home brew + computing projects such as N8VEM home brew computing project. The P112 + project still maintains many devoted enthusiasts and has an online + repository of software and other information. + The P112 computer originated as a commercial product of "D-X Designs Pty + Ltd" of Australia. They describe the computer as "The P112 is a stand-alone + 8-bit CPU board. Typically running CP/M (tm) or a similar operating system, + it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial, + parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor. + Powered solely from 5V, it draws 150mA (nominal: not including disk drives) + with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible." + + The P112 board was last available new in 1996 by Dave Brooks. In late 2004 + on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112 + boards was discussed. David Griffith decided to produce additional P112 kits + with Dave Brooks blessing and the assistance of others. In addition Terry + Gulczynski makes additional P112 derivative hobbyist home brew computers. + Hal Bower was very active in the mid 1990's on the P112 project and ported + the "Banked/Portable BIOS". + +configs/pic32-starterkit This directory contains the port of NuttX to the Microchip PIC32 Ethernet Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005). See www.microchip.com for further information. configs/pic32mx7mmb - This directory will (eventually) contain the port of NuttX to the Mikroelektronika PIC32MX7 Multimedia Board (MMB). See http://www.mikroe.com/ for further information. @@ -1797,7 +1819,6 @@ configs/pjrc-8051 and the SDCC toolchain. This port is not quite ready for prime time. configs/qemu-i486 - Port of NuttX to QEMU in i486 mode. This port will also run on real i486 hardwared (Google the Bifferboard). diff --git a/configs/p112/Kconfig b/configs/p112/Kconfig new file mode 100644 index 0000000000..ae2bf31307 --- /dev/null +++ b/configs/p112/Kconfig @@ -0,0 +1,4 @@ +# +# For a description of the syntax of this configuration file, +# see misc/tools/kconfig-language.txt. +# diff --git a/configs/p112/README.txt b/configs/p112/README.txt new file mode 100644 index 0000000000..6b6f5964d9 --- /dev/null +++ b/configs/p112/README.txt @@ -0,0 +1,26 @@ +P112 README +^^^^^^^^^^^ + +The P112 is notable because it was the first of the hobbyist single board +computers to reach the production stage. The P112 hobbyist computers +were relatively widespread and inspired other hobbyist centered home brew +computing projects such as N8VEM home brew computing project. The P112 +project still maintains many devoted enthusiasts and has an online +repository of software and other information. + +The P112 computer originated as a commercial product of "D-X Designs Pty +Ltd" of Australia. They describe the computer as "The P112 is a stand-alone +8-bit CPU board. Typically running CP/M (tm) or a similar operating system, +it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial, +parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor. +Powered solely from 5V, it draws 150mA (nominal: not including disk drives) +with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible." + +The P112 board was last available new in 1996 by Dave Brooks. In late 2004 +on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112 +boards was discussed. David Griffith decided to produce additional P112 kits +with Dave Brooks blessing and the assistance of others. In addition Terry +Gulczynski makes additional P112 derivative hobbyist home brew computers. +Hal Bower was very active in the mid 1990's on the P112 project and ported +the "Banked/Portable BIOS". + diff --git a/configs/p112/include/board.h b/configs/p112/include/board.h new file mode 100644 index 0000000000..55077709d9 --- /dev/null +++ b/configs/p112/include/board.h @@ -0,0 +1,60 @@ +/************************************************************ + * configs/p112/include/board.h + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************/ + +#ifndef __CONFIGS_P112_INCLUDE_BOARD_H +#define __CONFIGS_P112_INCLUDE_BOARD_H + +/************************************************************ + * Included Files + ************************************************************/ + +/************************************************************ + * Definitions + ************************************************************/ + +/************************************************************ + * Public Functions + ************************************************************/ + +#if defined(__cplusplus) +extern "C" +{ +#endif + +#if defined(__cplusplus) +} +#endif + +#endif /* __CONFIGS_P112_INCLUDE_BOARD_H */ diff --git a/configs/p112/ostest/Make.defs b/configs/p112/ostest/Make.defs new file mode 100644 index 0000000000..e64c7b5dd3 --- /dev/null +++ b/configs/p112/ostest/Make.defs @@ -0,0 +1,167 @@ +############################################################################ +# configs/p112/ostest/Make.defs +# +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk + +# These are the directories where the SDCC toolchain is installed. NOTE +# that short 8.3 path names are used in order to avoid spaces. On my machine +# I have: +# +# C:\PROGRA~1\ = C:\Profram Files\ +# C:\PROGRA~2\ = C:\Program Files (x86)\ +# +# Your PC may be configured differently. + +ifeq ($(CONFIG_WINDOWS_NATIVE),y) + SDCC_INSTALLDIR = C:\PROGRA~2\SDCC + SDCC_BINDIR = $(SDCC_INSTALLDIR)\bin + SDCC_LIBDIR = $(SDCC_INSTALLDIR)\lib\z180 +else + SDCC_INSTALLDIR = /usr/local + SDCC_BINDIR = $(SDCC_INSTALLDIR)/bin + SDCC_LIBDIR = $(SDCC_INSTALLDIR)/share/sdcc/lib/z180 +endif + +CROSSDEV = +CC = sdcc +CPP = sdcpp +LD = sdldz80 +AS = sdasz80 +AR = sdar -r +ARCHCPUFLAGS = -mz180 + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = --debug +else + ARCHOPTIMIZATION = +endif + +ARCHPICFLAGS = +ARCHWARNINGS = +ARCHDEFINES = +ARCHINCLUDES = -I. -I$(TOPDIR)$(DELIM)include + +CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = -x -a -l -o -s -g + +SDCCLIB = z180.lib + +ASMEXT = .asm +OBJEXT = .o +LIBEXT = .lib +EXEEXT = .hex + +# Custom ASSEMBLE definition. The most common toolchain, GCC, uses the +# compiler to assemble files because this has the advantage of running the C +# Pre-Processor against. This is not possible with other SDCC; we need to +# define AS and over-ride the common definition in order to use the assembler +# directly. + +define ASSEMBLE + @echo "AS: $1" + $(Q) $(AS) $(AFLAGS) $2 $1 +endef + +# Custom CLEAN definition + +ifeq ($(CONFIG_WINDOWS_NATIVE),y) +define CLEAN + $(Q) if exist *.o (del /f /q *.o) + $(Q) if exist *.asm (del /f /q *.asm) + $(Q) if exist *.rel (del /f /q *.rel) + $(Q) if exist *.lst (del /f /q *.lst) + $(Q) if exist *.rst (del /f /q *.rst) + $(Q) if exist *.sym (del /f /q *.sym) + $(Q) if exist *.adb (del /f /q *.adb) + $(Q) if exist *.lnk (del /f /q *.lnk) + $(Q) if exist *.map (del /f /q *.map) + $(Q) if exist *.mem (del /f /q *.mem) + $(Q) if exist *.hex (del /f /q *.hex) + $(Q) if exist *.cmd (del /f /q *.cmd) +endef +else +define CLEAN + $(Q) rm -f *.o *.asm *.rel *.lst *.rst *.sym *.adb *.lnk *.map *.mem *.hex *.cmd +endef +endif + +# Windows native host tool definitions + +ifeq ($(CONFIG_WINDOWS_NATIVE),y) + HOSTCC = mingw32-gcc.exe + HOSTINCLUDES = -I. + HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe + HOSTLDFLAGS = + HOSTEXEEXT = .exe + + # Windows-native host tools + + MKDEP = $(TOPDIR)\tools\mkdeps.exe --winnative + + # Use NTFS links or directory copies + +ifeq ($(CONFIG_WINDOWS_MKLINK),y) + DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)link.bat +else + DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.bat +endif +DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.bat + +else + +# Linux/Cygwin host tool definitions + + HOSTCC = gcc + HOSTINCLUDES = -I. + HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe + HOSTLDFLAGS = + + # This is the tool to use for dependencies (i.e., none) + + MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh + + # SDCC for Linux, OSX, or Cygwin understands symbolic links. Windows SDCC + # running under Cygwin does not + +ifeq ($(WINTOOL),y) + DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh +else + DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)link.sh +endif +DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh + +endif diff --git a/configs/p112/ostest/defconfig b/configs/p112/ostest/defconfig new file mode 100644 index 0000000000..2cdc13ba5f --- /dev/null +++ b/configs/p112/ostest/defconfig @@ -0,0 +1,530 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +CONFIG_WINDOWS_NATIVE=y +# CONFIG_WINDOWS_CYGWIN is not set +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set +# CONFIG_WINDOWS_MKLINK is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="..\apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +# CONFIG_RAW_BINARY is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +# CONFIG_ARCH_ARM is not set +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +CONFIG_ARCH_Z80=y +CONFIG_ARCH="z80" +CONFIG_ARCH_CHIP="z180" +CONFIG_BOARD_LOOPSPERMSEC=100 +# CONFIG_ARCH_CHIP_Z80 is not set +# CONFIG_ARCH_CHIP_Z8018006VSG is not set +# CONFIG_ARCH_CHIP_Z8018010VSG is not set +# CONFIG_ARCH_CHIP_Z8018008VSG is not set +# CONFIG_ARCH_CHIP_Z8018010FSG is not set +# CONFIG_ARCH_CHIP_Z8018008VEG is not set +# CONFIG_ARCH_CHIP_Z8018006VEG is not set +# CONFIG_ARCH_CHIP_Z8018006PSG is not set +# CONFIG_ARCH_CHIP_Z8018008FSG is not set +# CONFIG_ARCH_CHIP_Z8018010PSG is not set +# CONFIG_ARCH_CHIP_Z8018006PEG is not set +# CONFIG_ARCH_CHIP_Z8018010VEG is not set +# CONFIG_ARCH_CHIP_Z8018010PEG is not set +# CONFIG_ARCH_CHIP_Z8018008PSG is not set +# CONFIG_ARCH_CHIP_Z8018006FSG is not set +# CONFIG_ARCH_CHIP_Z8018000XSO is not set +# CONFIG_ARCH_CHIP_Z8018010FEG is not set +# CONFIG_ARCH_CHIP_Z8018000WSO is not set +# CONFIG_ARCH_CHIP_Z8018008PEG is not set +# CONFIG_ARCH_CHIP_Z8018110FEG is not set +# CONFIG_ARCH_CHIP_Z8018233FSG is not set +# CONFIG_ARCH_CHIP_Z8018220AEG is not set +CONFIG_ARCH_CHIP_Z8018216FSG=y +# CONFIG_ARCH_CHIP_Z8018216ASG is not set +# CONFIG_ARCH_CHIP_Z8018233ASG is not set +# CONFIG_ARCH_CHIP_Z8019520FSG is not set +# CONFIG_ARCH_CHIP_Z8019533FSG is not set +# CONFIG_ARCH_CHIP_Z8L18020VSG is not set +# CONFIG_ARCH_CHIP_Z8L18020FSG is not set +# CONFIG_ARCH_CHIP_Z8L18020PSG is not set +# CONFIG_ARCH_CHIP_Z8L18220ASG is not set +# CONFIG_ARCH_CHIP_Z8L18220FSG is not set +# CONFIG_ARCH_CHIP_Z8L18220AEG is not set +# CONFIG_ARCH_CHIP_Z8S18020VSG is not set +# CONFIG_ARCH_CHIP_Z8S18020VSG1960 is not set +# CONFIG_ARCH_CHIP_Z8S18033VSG is not set +# CONFIG_ARCH_CHIP_Z8S18010FSG is not set +# CONFIG_ARCH_CHIP_Z8S18010VEG is not set +# CONFIG_ARCH_CHIP_Z8S18020VEG is not set +# CONFIG_ARCH_CHIP_Z8S18010VSG is not set +# CONFIG_ARCH_CHIP_Z8S18020PSG is not set +# CONFIG_ARCH_CHIP_Z8S18033FSG is not set +# CONFIG_ARCH_CHIP_Z8S18033FEG is not set +# CONFIG_ARCH_CHIP_Z8S18020FSG is not set +# CONFIG_ARCH_CHIP_Z8S18033VEG is not set +# CONFIG_ARCH_CHIP_Z8S18010PSG is not set +# CONFIG_ARCH_CHIP_Z8S18020FEG is not set +# CONFIG_ARCH_CHIP_Z8S18010PEG is not set +# CONFIG_ARCH_CHIP_Z8S18010FEG is not set +# CONFIG_ARCH_CHIP_Z8F6403 is not set +# CONFIG_ARCH_CHIP_Z8F6423 is not set +# CONFIG_ARCH_CHIP_EZ80F91 is not set +# CONFIG_ARCH_CHIP_EZ80F92 is not set +# CONFIG_ARCH_CHIP_EZ80F93 is not set +CONFIG_ARCH_CHIP_Z180=y +CONFIG_ARCH_CHIP_Z80182=y +CONFIG_LINKER_HOME_AREA=0x0000 +CONFIG_LINKER_CODE_AREA=0x0200 +CONFIG_LINKER_DATA_AREA=0x8000 +# CONFIG_LINKER_ROM_AT_0000 is not set +# CONFIG_ARCH_HAVEHEAD is not set +# CONFIG_Z180_TOOLCHAIN_SDCCL is not set +CONFIG_Z180_TOOLCHAIN_SDCCW=y +CONFIG_Z180_BANKAREA_VIRTBASE=0x8000 +CONFIG_Z180_BANKAREA_PHYSBASE=0x08000 +CONFIG_Z180_COMMON1AREA_VIRTBASE=0xc000 +CONFIG_Z180_PHYSHEAP_START=0x0c000 +CONFIG_Z180_PHYSHEAP_END=0x100000 + +# +# Z180 Peripheral Support +# +CONFIG_Z180_UART0=y +CONFIG_Z180_UART1=y + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_DMA is not set +# CONFIG_ARCH_IRQPRIO is not set +# CONFIG_CUSTOM_STACK is not set +CONFIG_ADDRENV=y +# CONFIG_ARCH_STACKDUMP is not set +# CONFIG_ENDIAN_BIG is not set + +# +# Board Settings +# +CONFIG_DRAM_START=0x0000 +CONFIG_DRAM_SIZE=65536 + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_P112=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="p112" + +# +# Common Board Options +# + +# +# Board-Specific Options +# + +# +# RTOS Features +# +CONFIG_MSEC_PER_TICK=10 +CONFIG_RR_INTERVAL=0 +# CONFIG_SCHED_INSTRUMENTATION is not set +CONFIG_TASK_NAME_SIZE=0 +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2007 +CONFIG_START_MONTH=2 +CONFIG_START_DAY=21 +# CONFIG_DEV_CONSOLE is not set +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="ostest_main" +CONFIG_DISABLE_OS_API=y +CONFIG_DISABLE_CLOCK=y +CONFIG_DISABLE_POSIX_TIMERS=y +CONFIG_DISABLE_PTHREAD=y +CONFIG_DISABLE_SIGNALS=y +CONFIG_DISABLE_MQUEUE=y +CONFIG_DISABLE_MOUNTPOINT=y +CONFIG_DISABLE_ENVIRON=y +CONFIG_DISABLE_POLL=y + +# +# Sizes of configurable things (0 disables) +# +CONFIG_MAX_TASKS=8 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=0 +CONFIG_NFILE_DESCRIPTORS=0 +CONFIG_NFILE_STREAMS=0 +CONFIG_NAME_MAX=32 +CONFIG_PREALLOC_MQ_MSGS=0 +CONFIG_MQ_MAXMSGSIZE=0 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=0 + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=1024 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=1024 + +# +# Device Drivers +# +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +CONFIG_DEV_LOWCONSOLE=y +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART0=y +CONFIG_ARCH_HAVE_UART1=y +CONFIG_MCU_SERIAL=y +CONFIG_UART0_SERIAL_CONSOLE=y +# CONFIG_UART1_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART0 Configuration +# +CONFIG_UART0_RXBUFSIZE=64 +CONFIG_UART0_TXBUFSIZE=64 +CONFIG_UART0_BAUD=115200 +CONFIG_UART0_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART0_2STOP=0 + +# +# UART1 Configuration +# +CONFIG_UART1_RXBUFSIZE=64 +CONFIG_UART1_TXBUFSIZE=64 +CONFIG_UART1_BAUD=115200 +CONFIG_UART1_BITS=8 +CONFIG_UART1_PARITY=0 +CONFIG_UART1_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_FS_RAMMAP is not set + +# +# System Logging +# +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +CONFIG_ARCH_HAVE_HEAP2=y +CONFIG_HEAP2_BASE=0x00000000 +CONFIG_HEAP2_SIZE=0 +# CONFIG_GRAN is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# +CONFIG_STDIO_BUFFER_SIZE=0 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=0 +# CONFIG_LIBM is not set +CONFIG_NOPRINTF_FIELDWIDTH=y +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Named Applications +# +# CONFIG_NAMEDAPP is not set + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CDCACM is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_NETTEST is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +CONFIG_EXAMPLES_OSTEST=y +# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set +CONFIG_EXAMPLES_OSTEST_LOOPS=1 +CONFIG_EXAMPLES_OSTEST_STACKSIZE=1024 +CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=4 +CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000 +CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WLAN is not set + +# +# Interpreters +# + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# ModBus +# + +# +# FreeModbus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# readline() +# +# CONFIG_SYSTEM_READLINE is not set + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set diff --git a/configs/p112/ostest/setenv.bat b/configs/p112/ostest/setenv.bat new file mode 100644 index 0000000000..19ca1ef57d --- /dev/null +++ b/configs/p112/ostest/setenv.bat @@ -0,0 +1,50 @@ +@echo off + +rem configs/p112/ostest/setenv.bat +rem +rem Copyright (C) 2012 Gregory Nutt. All rights reserved. +rem Author: Gregory Nutt +rem +rem Redistribution and use in source and binary forms, with or without +rem modification, are permitted provided that the following conditions +rem are met: +rem +rem 1. Redistributions of source code must retain the above copyright +rem notice, this list of conditions and the following disclaimer. +rem 2. Redistributions in binary form must reproduce the above copyright +rem notice, this list of conditions and the following disclaimer in +rem the documentation and/or other materials provided with the +rem distribution. +rem 3. Neither the name NuttX nor the names of its contributors may be +rem used to endorse or promote products derived from this software +rem without specific prior written permission. +rem +rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +rem POSSIBILITY OF SUCH DAMAGE. + +rem This is the location where I installed in the MinGW compiler. With +rem this configuration, it is recommended that you do NOT install the +rem MSYS tools; they conflict with the GNUWin32 tools. See +rem http://www.mingw.org/ for further info. + +set PATH=C:\MinGW\bin;%PATH% + +rem This is the location where I installed the SDCC toolchain for windows. + +set PATH=C:\Program Files (x86)\SDCC/bin;%PATH% + +rem This is the location where I installed the GNUWin32 tools. See +rem http://gnuwin32.sourceforge.net/. + +set PATH=C:\gnuwin32\bin;%PATH% +echo %PATH% diff --git a/configs/p112/scripts/setenv.bat b/configs/p112/scripts/setenv.bat new file mode 100644 index 0000000000..dc214445f1 --- /dev/null +++ b/configs/p112/scripts/setenv.bat @@ -0,0 +1,50 @@ +@echo off + +rem configs/p112/scripts/setenv.bat +rem +rem Copyright (C) 2012 Gregory Nutt. All rights reserved. +rem Author: Gregory Nutt +rem +rem Redistribution and use in source and binary forms, with or without +rem modification, are permitted provided that the following conditions +rem are met: +rem +rem 1. Redistributions of source code must retain the above copyright +rem notice, this list of conditions and the following disclaimer. +rem 2. Redistributions in binary form must reproduce the above copyright +rem notice, this list of conditions and the following disclaimer in +rem the documentation and/or other materials provided with the +rem distribution. +rem 3. Neither the name NuttX nor the names of its contributors may be +rem used to endorse or promote products derived from this software +rem without specific prior written permission. +rem +rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +rem POSSIBILITY OF SUCH DAMAGE. + +rem This is the location where I installed in the MinGW compiler. With +rem this configuration, it is recommended that you do NOT install the +rem MSYS tools; they conflict with the GNUWin32 tools. See +rem http://www.mingw.org/ for further info. + +set PATH=C:\MinGW\bin;%PATH% + +rem This is the location where I installed the SDCC toolchain for windows. + +set PATH=C:\Program Files (x86)\SDCC/bin;%PATH% + +rem This is the location where I installed the GNUWin32 tools. See +rem http://gnuwin32.sourceforge.net/. + +set PATH=C:\gnuwin32\bin;%PATH% +echo %PATH% diff --git a/configs/p112/scripts/setenv.sh b/configs/p112/scripts/setenv.sh new file mode 100755 index 0000000000..c55027d622 --- /dev/null +++ b/configs/p112/scripts/setenv.sh @@ -0,0 +1,66 @@ +#!/bin/bash +# configs/p112/ostest/setenv.sh +# +# Copyright (C) 2007, 2008, 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# +# This is the normal installation directory for SDCC under Linux, OSX +# or Linux: +# +export TOOLCHAIN_BIN=/usr/local/bin + +# +# This is the normal installation directory for SDCC under Windows +# +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/SDCC/bin" + +# +# Add the path to the toolchain to the PATH varialble +# +export PATH="${TOOLCHAIN_BIN}":/sbin:/usr/sbin:${PATH_ORIG} + +echo "PATH : ${PATH}" diff --git a/configs/p112/src/Makefile b/configs/p112/src/Makefile new file mode 100644 index 0000000000..087e1ab2bd --- /dev/null +++ b/configs/p112/src/Makefile @@ -0,0 +1,77 @@ +############################################################################ +# configs/p112/src/Makefile +# +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +CFLAGS += -I$(TOPDIR)$(DELIM)sched +CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)common +CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)z180 + +ASRCS = +AOBJS = $(ASRCS:$(ASMEXT)=$(OBJEXT)) +CSRCS = +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +CFLAGS += -I $(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src + +all: libboard$(LIBEXT) + +$(AOBJS): %$(OBJEXT): %$(ASMEXT) + $(call ASSEMBLE, $<, $@) + +$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +libboard$(LIBEXT): $(OBJS) + $(call ARCHIVE, $@, $(OBJS)) + +.depend: Makefile $(SRCS) + $(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + $(Q) touch $@ + +depend: .depend + +clean: + $(call DELFILE, libboard$(LIBEXT)) + $(call CLEAN) + +distclean: clean + $(call DELFILE, Make.dep) + $(call DELFILE, .depend) + +-include Make.dep diff --git a/configs/z80sim/src/Makefile b/configs/z80sim/src/Makefile index 99d5578502..9ace929124 100644 --- a/configs/z80sim/src/Makefile +++ b/configs/z80sim/src/Makefile @@ -36,7 +36,7 @@ -include $(TOPDIR)/Make.defs CFLAGS += -I$(TOPDIR)$(DELIM)sched -CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)common -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)z80 +CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)common CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)z80 ASRCS =