configs/p112: Add a configuration for the Z180 P112 board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5429 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
fdbc1946cb
commit
c6f0dd9ae6
@ -346,6 +346,33 @@ config ARCH_BOARD_OLIMEX_STM32P107
|
|||||||
Linux or Cygwin. See the http://www.olimex.com for further information. This
|
Linux or Cygwin. See the http://www.olimex.com for further information. This
|
||||||
board features the STMicro STM32F107VC MCU
|
board features the STMicro STM32F107VC MCU
|
||||||
|
|
||||||
|
config ARCH_BOARD_P112
|
||||||
|
bool "P112 Z180-based platform"
|
||||||
|
depends on ARCH_CHIP_Z8018216FSG
|
||||||
|
---help---
|
||||||
|
The P112 is notable because it was the first of the hobbyist single board
|
||||||
|
computers to reach the production stage. The P112 hobbyist computers
|
||||||
|
were relatively widespread and inspired other hobbyist centered home brew
|
||||||
|
computing projects such as N8VEM home brew computing project. The P112
|
||||||
|
project still maintains many devoted enthusiasts and has an online
|
||||||
|
repository of software and other information.
|
||||||
|
|
||||||
|
The P112 computer originated as a commercial product of "D-X Designs Pty
|
||||||
|
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
|
||||||
|
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
|
||||||
|
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
|
||||||
|
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
|
||||||
|
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
|
||||||
|
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
|
||||||
|
|
||||||
|
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
|
||||||
|
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
|
||||||
|
boards was discussed. David Griffith decided to produce additional P112 kits
|
||||||
|
with Dave Brooks blessing and the assistance of others. In addition Terry
|
||||||
|
Gulczynski makes additional P112 derivative hobbyist home brew computers.
|
||||||
|
Hal Bower was very active in the mid 1990's on the P112 project and ported
|
||||||
|
the "Banked/Portable BIOS".
|
||||||
|
|
||||||
config ARCH_BOARD_PCBLOGICPIC32MX
|
config ARCH_BOARD_PCBLOGICPIC32MX
|
||||||
bool "PIC32MX board from PCB Logic Design Co"
|
bool "PIC32MX board from PCB Logic Design Co"
|
||||||
depends on ARCH_CHIP_PIC32MX460F512L
|
depends on ARCH_CHIP_PIC32MX460F512L
|
||||||
@ -647,6 +674,7 @@ config ARCH_BOARD
|
|||||||
default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378
|
default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378
|
||||||
default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107
|
default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107
|
||||||
default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711
|
default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711
|
||||||
|
default "p112" if ARCH_BOARD_P112
|
||||||
default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX
|
default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX
|
||||||
default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT
|
default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT
|
||||||
default "pic32mx7mmb" if ARCH_BOARD_PIC32_PIC32MX7MMB
|
default "pic32mx7mmb" if ARCH_BOARD_PIC32_PIC32MX7MMB
|
||||||
|
|||||||
@ -1780,14 +1780,36 @@ configs/pcblogic-pic32mx
|
|||||||
STATUS: Code complete but testing has been stalled due to tool related problems
|
STATUS: Code complete but testing has been stalled due to tool related problems
|
||||||
(PICkit 2 does not work with the PIC32).
|
(PICkit 2 does not work with the PIC32).
|
||||||
|
|
||||||
configs/pic32-starterkit
|
configs/p112
|
||||||
|
The P112 is notable because it was the first of the hobbyist single board
|
||||||
|
computers to reach the production stage. The P112 hobbyist computers
|
||||||
|
were relatively widespread and inspired other hobbyist centered home brew
|
||||||
|
computing projects such as N8VEM home brew computing project. The P112
|
||||||
|
project still maintains many devoted enthusiasts and has an online
|
||||||
|
repository of software and other information.
|
||||||
|
|
||||||
|
The P112 computer originated as a commercial product of "D-X Designs Pty
|
||||||
|
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
|
||||||
|
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
|
||||||
|
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
|
||||||
|
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
|
||||||
|
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
|
||||||
|
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
|
||||||
|
|
||||||
|
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
|
||||||
|
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
|
||||||
|
boards was discussed. David Griffith decided to produce additional P112 kits
|
||||||
|
with Dave Brooks blessing and the assistance of others. In addition Terry
|
||||||
|
Gulczynski makes additional P112 derivative hobbyist home brew computers.
|
||||||
|
Hal Bower was very active in the mid 1990's on the P112 project and ported
|
||||||
|
the "Banked/Portable BIOS".
|
||||||
|
|
||||||
|
configs/pic32-starterkit
|
||||||
This directory contains the port of NuttX to the Microchip PIC32 Ethernet
|
This directory contains the port of NuttX to the Microchip PIC32 Ethernet
|
||||||
Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005).
|
Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005).
|
||||||
See www.microchip.com for further information.
|
See www.microchip.com for further information.
|
||||||
|
|
||||||
configs/pic32mx7mmb
|
configs/pic32mx7mmb
|
||||||
|
|
||||||
This directory will (eventually) contain the port of NuttX to the
|
This directory will (eventually) contain the port of NuttX to the
|
||||||
Mikroelektronika PIC32MX7 Multimedia Board (MMB). See
|
Mikroelektronika PIC32MX7 Multimedia Board (MMB). See
|
||||||
http://www.mikroe.com/ for further information.
|
http://www.mikroe.com/ for further information.
|
||||||
@ -1797,7 +1819,6 @@ configs/pjrc-8051
|
|||||||
and the SDCC toolchain. This port is not quite ready for prime time.
|
and the SDCC toolchain. This port is not quite ready for prime time.
|
||||||
|
|
||||||
configs/qemu-i486
|
configs/qemu-i486
|
||||||
|
|
||||||
Port of NuttX to QEMU in i486 mode. This port will also run on real i486
|
Port of NuttX to QEMU in i486 mode. This port will also run on real i486
|
||||||
hardwared (Google the Bifferboard).
|
hardwared (Google the Bifferboard).
|
||||||
|
|
||||||
|
|||||||
4
configs/p112/Kconfig
Normal file
4
configs/p112/Kconfig
Normal file
@ -0,0 +1,4 @@
|
|||||||
|
#
|
||||||
|
# For a description of the syntax of this configuration file,
|
||||||
|
# see misc/tools/kconfig-language.txt.
|
||||||
|
#
|
||||||
26
configs/p112/README.txt
Normal file
26
configs/p112/README.txt
Normal file
@ -0,0 +1,26 @@
|
|||||||
|
P112 README
|
||||||
|
^^^^^^^^^^^
|
||||||
|
|
||||||
|
The P112 is notable because it was the first of the hobbyist single board
|
||||||
|
computers to reach the production stage. The P112 hobbyist computers
|
||||||
|
were relatively widespread and inspired other hobbyist centered home brew
|
||||||
|
computing projects such as N8VEM home brew computing project. The P112
|
||||||
|
project still maintains many devoted enthusiasts and has an online
|
||||||
|
repository of software and other information.
|
||||||
|
|
||||||
|
The P112 computer originated as a commercial product of "D-X Designs Pty
|
||||||
|
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
|
||||||
|
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
|
||||||
|
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
|
||||||
|
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
|
||||||
|
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
|
||||||
|
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
|
||||||
|
|
||||||
|
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
|
||||||
|
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
|
||||||
|
boards was discussed. David Griffith decided to produce additional P112 kits
|
||||||
|
with Dave Brooks blessing and the assistance of others. In addition Terry
|
||||||
|
Gulczynski makes additional P112 derivative hobbyist home brew computers.
|
||||||
|
Hal Bower was very active in the mid 1990's on the P112 project and ported
|
||||||
|
the "Banked/Portable BIOS".
|
||||||
|
|
||||||
60
configs/p112/include/board.h
Normal file
60
configs/p112/include/board.h
Normal file
@ -0,0 +1,60 @@
|
|||||||
|
/************************************************************
|
||||||
|
* configs/p112/include/board.h
|
||||||
|
*
|
||||||
|
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
************************************************************/
|
||||||
|
|
||||||
|
#ifndef __CONFIGS_P112_INCLUDE_BOARD_H
|
||||||
|
#define __CONFIGS_P112_INCLUDE_BOARD_H
|
||||||
|
|
||||||
|
/************************************************************
|
||||||
|
* Included Files
|
||||||
|
************************************************************/
|
||||||
|
|
||||||
|
/************************************************************
|
||||||
|
* Definitions
|
||||||
|
************************************************************/
|
||||||
|
|
||||||
|
/************************************************************
|
||||||
|
* Public Functions
|
||||||
|
************************************************************/
|
||||||
|
|
||||||
|
#if defined(__cplusplus)
|
||||||
|
extern "C"
|
||||||
|
{
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(__cplusplus)
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __CONFIGS_P112_INCLUDE_BOARD_H */
|
||||||
167
configs/p112/ostest/Make.defs
Normal file
167
configs/p112/ostest/Make.defs
Normal file
@ -0,0 +1,167 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/p112/ostest/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
include ${TOPDIR}/tools/Config.mk
|
||||||
|
|
||||||
|
# These are the directories where the SDCC toolchain is installed. NOTE
|
||||||
|
# that short 8.3 path names are used in order to avoid spaces. On my machine
|
||||||
|
# I have:
|
||||||
|
#
|
||||||
|
# C:\PROGRA~1\ = C:\Profram Files\
|
||||||
|
# C:\PROGRA~2\ = C:\Program Files (x86)\
|
||||||
|
#
|
||||||
|
# Your PC may be configured differently.
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
|
||||||
|
SDCC_INSTALLDIR = C:\PROGRA~2\SDCC
|
||||||
|
SDCC_BINDIR = $(SDCC_INSTALLDIR)\bin
|
||||||
|
SDCC_LIBDIR = $(SDCC_INSTALLDIR)\lib\z180
|
||||||
|
else
|
||||||
|
SDCC_INSTALLDIR = /usr/local
|
||||||
|
SDCC_BINDIR = $(SDCC_INSTALLDIR)/bin
|
||||||
|
SDCC_LIBDIR = $(SDCC_INSTALLDIR)/share/sdcc/lib/z180
|
||||||
|
endif
|
||||||
|
|
||||||
|
CROSSDEV =
|
||||||
|
CC = sdcc
|
||||||
|
CPP = sdcpp
|
||||||
|
LD = sdldz80
|
||||||
|
AS = sdasz80
|
||||||
|
AR = sdar -r
|
||||||
|
ARCHCPUFLAGS = -mz180
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
ARCHOPTIMIZATION = --debug
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION =
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHPICFLAGS =
|
||||||
|
ARCHWARNINGS =
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHINCLUDES = -I. -I$(TOPDIR)$(DELIM)include
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||||
|
AFLAGS = -x -a -l -o -s -g
|
||||||
|
|
||||||
|
SDCCLIB = z180.lib
|
||||||
|
|
||||||
|
ASMEXT = .asm
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .lib
|
||||||
|
EXEEXT = .hex
|
||||||
|
|
||||||
|
# Custom ASSEMBLE definition. The most common toolchain, GCC, uses the
|
||||||
|
# compiler to assemble files because this has the advantage of running the C
|
||||||
|
# Pre-Processor against. This is not possible with other SDCC; we need to
|
||||||
|
# define AS and over-ride the common definition in order to use the assembler
|
||||||
|
# directly.
|
||||||
|
|
||||||
|
define ASSEMBLE
|
||||||
|
@echo "AS: $1"
|
||||||
|
$(Q) $(AS) $(AFLAGS) $2 $1
|
||||||
|
endef
|
||||||
|
|
||||||
|
# Custom CLEAN definition
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
|
||||||
|
define CLEAN
|
||||||
|
$(Q) if exist *.o (del /f /q *.o)
|
||||||
|
$(Q) if exist *.asm (del /f /q *.asm)
|
||||||
|
$(Q) if exist *.rel (del /f /q *.rel)
|
||||||
|
$(Q) if exist *.lst (del /f /q *.lst)
|
||||||
|
$(Q) if exist *.rst (del /f /q *.rst)
|
||||||
|
$(Q) if exist *.sym (del /f /q *.sym)
|
||||||
|
$(Q) if exist *.adb (del /f /q *.adb)
|
||||||
|
$(Q) if exist *.lnk (del /f /q *.lnk)
|
||||||
|
$(Q) if exist *.map (del /f /q *.map)
|
||||||
|
$(Q) if exist *.mem (del /f /q *.mem)
|
||||||
|
$(Q) if exist *.hex (del /f /q *.hex)
|
||||||
|
$(Q) if exist *.cmd (del /f /q *.cmd)
|
||||||
|
endef
|
||||||
|
else
|
||||||
|
define CLEAN
|
||||||
|
$(Q) rm -f *.o *.asm *.rel *.lst *.rst *.sym *.adb *.lnk *.map *.mem *.hex *.cmd
|
||||||
|
endef
|
||||||
|
endif
|
||||||
|
|
||||||
|
# Windows native host tool definitions
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
|
||||||
|
HOSTCC = mingw32-gcc.exe
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
HOSTEXEEXT = .exe
|
||||||
|
|
||||||
|
# Windows-native host tools
|
||||||
|
|
||||||
|
MKDEP = $(TOPDIR)\tools\mkdeps.exe --winnative
|
||||||
|
|
||||||
|
# Use NTFS links or directory copies
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_WINDOWS_MKLINK),y)
|
||||||
|
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)link.bat
|
||||||
|
else
|
||||||
|
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.bat
|
||||||
|
endif
|
||||||
|
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.bat
|
||||||
|
|
||||||
|
else
|
||||||
|
|
||||||
|
# Linux/Cygwin host tool definitions
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
|
||||||
|
# This is the tool to use for dependencies (i.e., none)
|
||||||
|
|
||||||
|
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
|
||||||
|
|
||||||
|
# SDCC for Linux, OSX, or Cygwin understands symbolic links. Windows SDCC
|
||||||
|
# running under Cygwin does not
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
|
||||||
|
else
|
||||||
|
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)link.sh
|
||||||
|
endif
|
||||||
|
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
|
||||||
|
|
||||||
|
endif
|
||||||
530
configs/p112/ostest/defconfig
Normal file
530
configs/p112/ostest/defconfig
Normal file
@ -0,0 +1,530 @@
|
|||||||
|
#
|
||||||
|
# Automatically generated file; DO NOT EDIT.
|
||||||
|
# Nuttx/ Configuration
|
||||||
|
#
|
||||||
|
CONFIG_NUTTX_NEWCONFIG=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Setup
|
||||||
|
#
|
||||||
|
# CONFIG_EXPERIMENTAL is not set
|
||||||
|
# CONFIG_HOST_LINUX is not set
|
||||||
|
# CONFIG_HOST_OSX is not set
|
||||||
|
CONFIG_HOST_WINDOWS=y
|
||||||
|
# CONFIG_HOST_OTHER is not set
|
||||||
|
CONFIG_WINDOWS_NATIVE=y
|
||||||
|
# CONFIG_WINDOWS_CYGWIN is not set
|
||||||
|
# CONFIG_WINDOWS_MSYS is not set
|
||||||
|
# CONFIG_WINDOWS_OTHER is not set
|
||||||
|
# CONFIG_WINDOWS_MKLINK is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_APPS_DIR="..\apps"
|
||||||
|
# CONFIG_BUILD_2PASS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Output Formats
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY is not set
|
||||||
|
# CONFIG_INTELHEX_BINARY is not set
|
||||||
|
# CONFIG_MOTOROLA_SREC is not set
|
||||||
|
# CONFIG_RAW_BINARY is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Customize Header Files
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_STDBOOL_H is not set
|
||||||
|
# CONFIG_ARCH_MATH_H is not set
|
||||||
|
# CONFIG_ARCH_FLOAT_H is not set
|
||||||
|
# CONFIG_ARCH_STDARG_H is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Debug Options
|
||||||
|
#
|
||||||
|
# CONFIG_DEBUG is not set
|
||||||
|
# CONFIG_DEBUG_SYMBOLS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Type
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_8051 is not set
|
||||||
|
# CONFIG_ARCH_ARM is not set
|
||||||
|
# CONFIG_ARCH_AVR is not set
|
||||||
|
# CONFIG_ARCH_HC is not set
|
||||||
|
# CONFIG_ARCH_MIPS is not set
|
||||||
|
# CONFIG_ARCH_RGMP is not set
|
||||||
|
# CONFIG_ARCH_SH is not set
|
||||||
|
# CONFIG_ARCH_SIM is not set
|
||||||
|
# CONFIG_ARCH_X86 is not set
|
||||||
|
# CONFIG_ARCH_Z16 is not set
|
||||||
|
CONFIG_ARCH_Z80=y
|
||||||
|
CONFIG_ARCH="z80"
|
||||||
|
CONFIG_ARCH_CHIP="z180"
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=100
|
||||||
|
# CONFIG_ARCH_CHIP_Z80 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018006VSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018010VSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018008VSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018010FSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018008VEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018006VEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018006PSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018008FSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018010PSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018006PEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018010VEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018010PEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018008PSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018006FSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018000XSO is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018010FEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018000WSO is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018008PEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018110FEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018233FSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018220AEG is not set
|
||||||
|
CONFIG_ARCH_CHIP_Z8018216FSG=y
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018216ASG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8018233ASG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8019520FSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8019533FSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8L18020VSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8L18020FSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8L18020PSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8L18220ASG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8L18220FSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8L18220AEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18020VSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18020VSG1960 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18033VSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18010FSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18010VEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18020VEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18010VSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18020PSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18033FSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18033FEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18020FSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18033VEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18010PSG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18020FEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18010PEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8S18010FEG is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8F6403 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_Z8F6423 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_EZ80F91 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_EZ80F92 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_EZ80F93 is not set
|
||||||
|
CONFIG_ARCH_CHIP_Z180=y
|
||||||
|
CONFIG_ARCH_CHIP_Z80182=y
|
||||||
|
CONFIG_LINKER_HOME_AREA=0x0000
|
||||||
|
CONFIG_LINKER_CODE_AREA=0x0200
|
||||||
|
CONFIG_LINKER_DATA_AREA=0x8000
|
||||||
|
# CONFIG_LINKER_ROM_AT_0000 is not set
|
||||||
|
# CONFIG_ARCH_HAVEHEAD is not set
|
||||||
|
# CONFIG_Z180_TOOLCHAIN_SDCCL is not set
|
||||||
|
CONFIG_Z180_TOOLCHAIN_SDCCW=y
|
||||||
|
CONFIG_Z180_BANKAREA_VIRTBASE=0x8000
|
||||||
|
CONFIG_Z180_BANKAREA_PHYSBASE=0x08000
|
||||||
|
CONFIG_Z180_COMMON1AREA_VIRTBASE=0xc000
|
||||||
|
CONFIG_Z180_PHYSHEAP_START=0x0c000
|
||||||
|
CONFIG_Z180_PHYSHEAP_END=0x100000
|
||||||
|
|
||||||
|
#
|
||||||
|
# Z180 Peripheral Support
|
||||||
|
#
|
||||||
|
CONFIG_Z180_UART0=y
|
||||||
|
CONFIG_Z180_UART1=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_NOINTC is not set
|
||||||
|
# CONFIG_ARCH_DMA is not set
|
||||||
|
# CONFIG_ARCH_IRQPRIO is not set
|
||||||
|
# CONFIG_CUSTOM_STACK is not set
|
||||||
|
CONFIG_ADDRENV=y
|
||||||
|
# CONFIG_ARCH_STACKDUMP is not set
|
||||||
|
# CONFIG_ENDIAN_BIG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Settings
|
||||||
|
#
|
||||||
|
CONFIG_DRAM_START=0x0000
|
||||||
|
CONFIG_DRAM_SIZE=65536
|
||||||
|
|
||||||
|
#
|
||||||
|
# Boot options
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||||
|
CONFIG_BOOT_RUNFROMFLASH=y
|
||||||
|
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||||
|
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||||
|
# CONFIG_BOOT_COPYTORAM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Selection
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_BOARD_P112=y
|
||||||
|
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||||
|
CONFIG_ARCH_BOARD="p112"
|
||||||
|
|
||||||
|
#
|
||||||
|
# Common Board Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board-Specific Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# RTOS Features
|
||||||
|
#
|
||||||
|
CONFIG_MSEC_PER_TICK=10
|
||||||
|
CONFIG_RR_INTERVAL=0
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||||
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
|
# CONFIG_JULIAN_TIME is not set
|
||||||
|
CONFIG_START_YEAR=2007
|
||||||
|
CONFIG_START_MONTH=2
|
||||||
|
CONFIG_START_DAY=21
|
||||||
|
# CONFIG_DEV_CONSOLE is not set
|
||||||
|
# CONFIG_MUTEX_TYPES is not set
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||||
|
# CONFIG_FDCLONE_DISABLE is not set
|
||||||
|
# CONFIG_FDCLONE_STDIO is not set
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
# CONFIG_SCHED_WORKQUEUE is not set
|
||||||
|
# CONFIG_SCHED_WAITPID is not set
|
||||||
|
# CONFIG_SCHED_ATEXIT is not set
|
||||||
|
# CONFIG_SCHED_ONEXIT is not set
|
||||||
|
CONFIG_USER_ENTRYPOINT="ostest_main"
|
||||||
|
CONFIG_DISABLE_OS_API=y
|
||||||
|
CONFIG_DISABLE_CLOCK=y
|
||||||
|
CONFIG_DISABLE_POSIX_TIMERS=y
|
||||||
|
CONFIG_DISABLE_PTHREAD=y
|
||||||
|
CONFIG_DISABLE_SIGNALS=y
|
||||||
|
CONFIG_DISABLE_MQUEUE=y
|
||||||
|
CONFIG_DISABLE_MOUNTPOINT=y
|
||||||
|
CONFIG_DISABLE_ENVIRON=y
|
||||||
|
CONFIG_DISABLE_POLL=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sizes of configurable things (0 disables)
|
||||||
|
#
|
||||||
|
CONFIG_MAX_TASKS=8
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_NPTHREAD_KEYS=0
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=0
|
||||||
|
CONFIG_NFILE_STREAMS=0
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=0
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=0
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=4
|
||||||
|
CONFIG_PREALLOC_TIMERS=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=1024
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=1024
|
||||||
|
|
||||||
|
#
|
||||||
|
# Device Drivers
|
||||||
|
#
|
||||||
|
CONFIG_DEV_NULL=y
|
||||||
|
# CONFIG_DEV_ZERO is not set
|
||||||
|
# CONFIG_LOOP is not set
|
||||||
|
# CONFIG_RAMDISK is not set
|
||||||
|
# CONFIG_CAN is not set
|
||||||
|
# CONFIG_PWM is not set
|
||||||
|
# CONFIG_I2C is not set
|
||||||
|
# CONFIG_SPI is not set
|
||||||
|
# CONFIG_RTC is not set
|
||||||
|
# CONFIG_WATCHDOG is not set
|
||||||
|
# CONFIG_ANALOG is not set
|
||||||
|
# CONFIG_BCH is not set
|
||||||
|
# CONFIG_INPUT is not set
|
||||||
|
# CONFIG_LCD is not set
|
||||||
|
# CONFIG_MMCSD is not set
|
||||||
|
# CONFIG_MTD is not set
|
||||||
|
# CONFIG_PIPES is not set
|
||||||
|
# CONFIG_PM is not set
|
||||||
|
# CONFIG_POWER is not set
|
||||||
|
# CONFIG_SENSORS is not set
|
||||||
|
# CONFIG_SERCOMM_CONSOLE is not set
|
||||||
|
CONFIG_SERIAL=y
|
||||||
|
CONFIG_DEV_LOWCONSOLE=y
|
||||||
|
# CONFIG_16550_UART is not set
|
||||||
|
CONFIG_ARCH_HAVE_UART0=y
|
||||||
|
CONFIG_ARCH_HAVE_UART1=y
|
||||||
|
CONFIG_MCU_SERIAL=y
|
||||||
|
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||||
|
# CONFIG_UART1_SERIAL_CONSOLE is not set
|
||||||
|
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# UART0 Configuration
|
||||||
|
#
|
||||||
|
CONFIG_UART0_RXBUFSIZE=64
|
||||||
|
CONFIG_UART0_TXBUFSIZE=64
|
||||||
|
CONFIG_UART0_BAUD=115200
|
||||||
|
CONFIG_UART0_BITS=8
|
||||||
|
CONFIG_UART0_PARITY=0
|
||||||
|
CONFIG_UART0_2STOP=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# UART1 Configuration
|
||||||
|
#
|
||||||
|
CONFIG_UART1_RXBUFSIZE=64
|
||||||
|
CONFIG_UART1_TXBUFSIZE=64
|
||||||
|
CONFIG_UART1_BAUD=115200
|
||||||
|
CONFIG_UART1_BITS=8
|
||||||
|
CONFIG_UART1_PARITY=0
|
||||||
|
CONFIG_UART1_2STOP=0
|
||||||
|
# CONFIG_USBDEV is not set
|
||||||
|
# CONFIG_USBHOST is not set
|
||||||
|
# CONFIG_WIRELESS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging Device Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_RAMLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Support
|
||||||
|
#
|
||||||
|
# CONFIG_NET is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# File Systems
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# File system configuration
|
||||||
|
#
|
||||||
|
# CONFIG_FS_RAMMAP is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_SYSLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics Support
|
||||||
|
#
|
||||||
|
# CONFIG_NX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Memory Management
|
||||||
|
#
|
||||||
|
# CONFIG_MM_SMALL is not set
|
||||||
|
CONFIG_MM_REGIONS=1
|
||||||
|
CONFIG_ARCH_HAVE_HEAP2=y
|
||||||
|
CONFIG_HEAP2_BASE=0x00000000
|
||||||
|
CONFIG_HEAP2_SIZE=0
|
||||||
|
# CONFIG_GRAN is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Formats
|
||||||
|
#
|
||||||
|
# CONFIG_BINFMT_DISABLE is not set
|
||||||
|
# CONFIG_NXFLAT is not set
|
||||||
|
# CONFIG_ELF is not set
|
||||||
|
# CONFIG_PIC is not set
|
||||||
|
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Library Routines
|
||||||
|
#
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=0
|
||||||
|
CONFIG_STDIO_LINEBUFFER=y
|
||||||
|
CONFIG_NUNGET_CHARS=0
|
||||||
|
# CONFIG_LIBM is not set
|
||||||
|
CONFIG_NOPRINTF_FIELDWIDTH=y
|
||||||
|
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||||
|
# CONFIG_EOL_IS_CR is not set
|
||||||
|
# CONFIG_EOL_IS_LF is not set
|
||||||
|
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||||
|
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||||
|
# CONFIG_LIBC_STRERROR is not set
|
||||||
|
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||||
|
# CONFIG_ARCH_ROMGETC is not set
|
||||||
|
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Basic CXX Support
|
||||||
|
#
|
||||||
|
# CONFIG_C99_BOOL8 is not set
|
||||||
|
# CONFIG_HAVE_CXX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Application Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Named Applications
|
||||||
|
#
|
||||||
|
# CONFIG_NAMEDAPP is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Examples
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||||
|
# CONFIG_EXAMPLES_CAN is not set
|
||||||
|
# CONFIG_EXAMPLES_CDCACM is not set
|
||||||
|
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||||
|
# CONFIG_EXAMPLES_DHCPD is not set
|
||||||
|
# CONFIG_EXAMPLES_ELF is not set
|
||||||
|
# CONFIG_EXAMPLES_FTPC is not set
|
||||||
|
# CONFIG_EXAMPLES_FTPD is not set
|
||||||
|
# CONFIG_EXAMPLES_HELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||||
|
# CONFIG_EXAMPLES_JSON is not set
|
||||||
|
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||||
|
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_IGMP is not set
|
||||||
|
# CONFIG_EXAMPLES_LCDRW is not set
|
||||||
|
# CONFIG_EXAMPLES_MM is not set
|
||||||
|
# CONFIG_EXAMPLES_MOUNT is not set
|
||||||
|
# CONFIG_EXAMPLES_MODBUS is not set
|
||||||
|
# CONFIG_EXAMPLES_NETTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_NSH is not set
|
||||||
|
# CONFIG_EXAMPLES_NULL is not set
|
||||||
|
# CONFIG_EXAMPLES_NX is not set
|
||||||
|
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||||
|
# CONFIG_EXAMPLES_NXFFS is not set
|
||||||
|
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||||
|
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||||
|
# CONFIG_EXAMPLES_NXLINES is not set
|
||||||
|
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||||
|
CONFIG_EXAMPLES_OSTEST=y
|
||||||
|
# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
|
||||||
|
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||||
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=1024
|
||||||
|
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=4
|
||||||
|
CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
|
||||||
|
CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
|
||||||
|
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_PIPE is not set
|
||||||
|
# CONFIG_EXAMPLES_POLL is not set
|
||||||
|
# CONFIG_EXAMPLES_QENCODER is not set
|
||||||
|
# CONFIG_EXAMPLES_RGMP is not set
|
||||||
|
# CONFIG_EXAMPLES_ROMFS is not set
|
||||||
|
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||||
|
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||||
|
# CONFIG_EXAMPLES_TELNETD is not set
|
||||||
|
# CONFIG_EXAMPLES_THTTPD is not set
|
||||||
|
# CONFIG_EXAMPLES_TIFF is not set
|
||||||
|
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||||
|
# CONFIG_EXAMPLES_UDP is not set
|
||||||
|
# CONFIG_EXAMPLES_UIP is not set
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||||
|
# CONFIG_EXAMPLES_USBMSC is not set
|
||||||
|
# CONFIG_EXAMPLES_USBTERM is not set
|
||||||
|
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||||
|
# CONFIG_EXAMPLES_WLAN is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Interpreters
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Interpreters
|
||||||
|
#
|
||||||
|
# CONFIG_INTERPRETERS_FICL is not set
|
||||||
|
# CONFIG_INTERPRETERS_PCODE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Network Utilities
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Utilities
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_CODECS is not set
|
||||||
|
# CONFIG_NETUTILS_DHCPC is not set
|
||||||
|
# CONFIG_NETUTILS_DHCPD is not set
|
||||||
|
# CONFIG_NETUTILS_FTPC is not set
|
||||||
|
# CONFIG_NETUTILS_FTPD is not set
|
||||||
|
# CONFIG_NETUTILS_JSON is not set
|
||||||
|
# CONFIG_NETUTILS_RESOLV is not set
|
||||||
|
# CONFIG_NETUTILS_SMTP is not set
|
||||||
|
# CONFIG_NETUTILS_TELNETD is not set
|
||||||
|
# CONFIG_NETUTILS_TFTPC is not set
|
||||||
|
# CONFIG_NETUTILS_THTTPD is not set
|
||||||
|
# CONFIG_NETUTILS_UIPLIB is not set
|
||||||
|
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# ModBus
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# FreeModbus
|
||||||
|
#
|
||||||
|
# CONFIG_MODBUS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NSH Library
|
||||||
|
#
|
||||||
|
# CONFIG_NSH_LIBRARY is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NxWidgets/NxWM
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# System NSH Add-Ons
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Custom Free Memory Command
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_FREE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# I2C tool
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# FLASH Program Installation
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_INSTALL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# readline()
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_READLINE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Power Off
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_POWEROFF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAMTRON
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_RAMTRON is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SD Card
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SDCARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sysinfo
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SYSINFO is not set
|
||||||
50
configs/p112/ostest/setenv.bat
Normal file
50
configs/p112/ostest/setenv.bat
Normal file
@ -0,0 +1,50 @@
|
|||||||
|
@echo off
|
||||||
|
|
||||||
|
rem configs/p112/ostest/setenv.bat
|
||||||
|
rem
|
||||||
|
rem Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||||
|
rem Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
rem
|
||||||
|
rem Redistribution and use in source and binary forms, with or without
|
||||||
|
rem modification, are permitted provided that the following conditions
|
||||||
|
rem are met:
|
||||||
|
rem
|
||||||
|
rem 1. Redistributions of source code must retain the above copyright
|
||||||
|
rem notice, this list of conditions and the following disclaimer.
|
||||||
|
rem 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
rem notice, this list of conditions and the following disclaimer in
|
||||||
|
rem the documentation and/or other materials provided with the
|
||||||
|
rem distribution.
|
||||||
|
rem 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
rem used to endorse or promote products derived from this software
|
||||||
|
rem without specific prior written permission.
|
||||||
|
rem
|
||||||
|
rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
rem POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
|
||||||
|
rem This is the location where I installed in the MinGW compiler. With
|
||||||
|
rem this configuration, it is recommended that you do NOT install the
|
||||||
|
rem MSYS tools; they conflict with the GNUWin32 tools. See
|
||||||
|
rem http://www.mingw.org/ for further info.
|
||||||
|
|
||||||
|
set PATH=C:\MinGW\bin;%PATH%
|
||||||
|
|
||||||
|
rem This is the location where I installed the SDCC toolchain for windows.
|
||||||
|
|
||||||
|
set PATH=C:\Program Files (x86)\SDCC/bin;%PATH%
|
||||||
|
|
||||||
|
rem This is the location where I installed the GNUWin32 tools. See
|
||||||
|
rem http://gnuwin32.sourceforge.net/.
|
||||||
|
|
||||||
|
set PATH=C:\gnuwin32\bin;%PATH%
|
||||||
|
echo %PATH%
|
||||||
50
configs/p112/scripts/setenv.bat
Normal file
50
configs/p112/scripts/setenv.bat
Normal file
@ -0,0 +1,50 @@
|
|||||||
|
@echo off
|
||||||
|
|
||||||
|
rem configs/p112/scripts/setenv.bat
|
||||||
|
rem
|
||||||
|
rem Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||||
|
rem Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
rem
|
||||||
|
rem Redistribution and use in source and binary forms, with or without
|
||||||
|
rem modification, are permitted provided that the following conditions
|
||||||
|
rem are met:
|
||||||
|
rem
|
||||||
|
rem 1. Redistributions of source code must retain the above copyright
|
||||||
|
rem notice, this list of conditions and the following disclaimer.
|
||||||
|
rem 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
rem notice, this list of conditions and the following disclaimer in
|
||||||
|
rem the documentation and/or other materials provided with the
|
||||||
|
rem distribution.
|
||||||
|
rem 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
rem used to endorse or promote products derived from this software
|
||||||
|
rem without specific prior written permission.
|
||||||
|
rem
|
||||||
|
rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
rem POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
|
||||||
|
rem This is the location where I installed in the MinGW compiler. With
|
||||||
|
rem this configuration, it is recommended that you do NOT install the
|
||||||
|
rem MSYS tools; they conflict with the GNUWin32 tools. See
|
||||||
|
rem http://www.mingw.org/ for further info.
|
||||||
|
|
||||||
|
set PATH=C:\MinGW\bin;%PATH%
|
||||||
|
|
||||||
|
rem This is the location where I installed the SDCC toolchain for windows.
|
||||||
|
|
||||||
|
set PATH=C:\Program Files (x86)\SDCC/bin;%PATH%
|
||||||
|
|
||||||
|
rem This is the location where I installed the GNUWin32 tools. See
|
||||||
|
rem http://gnuwin32.sourceforge.net/.
|
||||||
|
|
||||||
|
set PATH=C:\gnuwin32\bin;%PATH%
|
||||||
|
echo %PATH%
|
||||||
66
configs/p112/scripts/setenv.sh
Executable file
66
configs/p112/scripts/setenv.sh
Executable file
@ -0,0 +1,66 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/p112/ostest/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2007, 2008, 2012 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$_" = "$0" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
if [ ! -x "setenv.sh" ]; then
|
||||||
|
echo "This script must be executed from the top-level NuttX build directory"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then
|
||||||
|
export PATH_ORIG="${PATH}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
#
|
||||||
|
# This is the normal installation directory for SDCC under Linux, OSX
|
||||||
|
# or Linux:
|
||||||
|
#
|
||||||
|
export TOOLCHAIN_BIN=/usr/local/bin
|
||||||
|
|
||||||
|
#
|
||||||
|
# This is the normal installation directory for SDCC under Windows
|
||||||
|
#
|
||||||
|
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/SDCC/bin"
|
||||||
|
|
||||||
|
#
|
||||||
|
# Add the path to the toolchain to the PATH varialble
|
||||||
|
#
|
||||||
|
export PATH="${TOOLCHAIN_BIN}":/sbin:/usr/sbin:${PATH_ORIG}
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
77
configs/p112/src/Makefile
Normal file
77
configs/p112/src/Makefile
Normal file
@ -0,0 +1,77 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/p112/src/Makefile
|
||||||
|
#
|
||||||
|
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
-include $(TOPDIR)/Make.defs
|
||||||
|
|
||||||
|
CFLAGS += -I$(TOPDIR)$(DELIM)sched
|
||||||
|
CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)common
|
||||||
|
CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)z180
|
||||||
|
|
||||||
|
ASRCS =
|
||||||
|
AOBJS = $(ASRCS:$(ASMEXT)=$(OBJEXT))
|
||||||
|
CSRCS =
|
||||||
|
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||||
|
|
||||||
|
SRCS = $(ASRCS) $(CSRCS)
|
||||||
|
OBJS = $(AOBJS) $(COBJS)
|
||||||
|
|
||||||
|
CFLAGS += -I $(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src
|
||||||
|
|
||||||
|
all: libboard$(LIBEXT)
|
||||||
|
|
||||||
|
$(AOBJS): %$(OBJEXT): %$(ASMEXT)
|
||||||
|
$(call ASSEMBLE, $<, $@)
|
||||||
|
|
||||||
|
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||||
|
$(call COMPILE, $<, $@)
|
||||||
|
|
||||||
|
libboard$(LIBEXT): $(OBJS)
|
||||||
|
$(call ARCHIVE, $@, $(OBJS))
|
||||||
|
|
||||||
|
.depend: Makefile $(SRCS)
|
||||||
|
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||||
|
$(Q) touch $@
|
||||||
|
|
||||||
|
depend: .depend
|
||||||
|
|
||||||
|
clean:
|
||||||
|
$(call DELFILE, libboard$(LIBEXT))
|
||||||
|
$(call CLEAN)
|
||||||
|
|
||||||
|
distclean: clean
|
||||||
|
$(call DELFILE, Make.dep)
|
||||||
|
$(call DELFILE, .depend)
|
||||||
|
|
||||||
|
-include Make.dep
|
||||||
@ -36,7 +36,7 @@
|
|||||||
-include $(TOPDIR)/Make.defs
|
-include $(TOPDIR)/Make.defs
|
||||||
|
|
||||||
CFLAGS += -I$(TOPDIR)$(DELIM)sched
|
CFLAGS += -I$(TOPDIR)$(DELIM)sched
|
||||||
CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)common -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)z80
|
CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)common
|
||||||
CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)z80
|
CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)z80
|
||||||
|
|
||||||
ASRCS =
|
ASRCS =
|
||||||
|
|||||||
Loading…
x
Reference in New Issue
Block a user