sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

configs/p112: Add a configuration for the Z180 P112 board

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5429 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-12-11 21:42:15 +00:00
parent fdbc1946cb
commit c6f0dd9ae6
12 changed files with 1083 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
configs/Kconfig
View File

@ -346,6 +346,33 @@ config ARCH_BOARD_OLIMEX_STM32P107
Linux or Cygwin. See the http://www.olimex.com for further information. This
board features the STMicro STM32F107VC MCU
config ARCH_BOARD_P112
bool "P112 Z180-based platform"
depends on ARCH_CHIP_Z8018216FSG
---help---
The P112 is notable because it was the first of the hobbyist single board
computers to reach the production stage. The P112 hobbyist computers
were relatively widespread and inspired other hobbyist centered home brew
computing projects such as N8VEM home brew computing project. The P112
project still maintains many devoted enthusiasts and has an online
repository of software and other information.
The P112 computer originated as a commercial product of "D-X Designs Pty
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
boards was discussed. David Griffith decided to produce additional P112 kits
with Dave Brooks blessing and the assistance of others. In addition Terry
Gulczynski makes additional P112 derivative hobbyist home brew computers.
Hal Bower was very active in the mid 1990's on the P112 project and ported
the "Banked/Portable BIOS".
config ARCH_BOARD_PCBLOGICPIC32MX
bool "PIC32MX board from PCB Logic Design Co"
depends on ARCH_CHIP_PIC32MX460F512L
@ -647,6 +674,7 @@ config ARCH_BOARD
default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378
default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107
default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711
default "p112" if ARCH_BOARD_P112
default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX
default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT
default "pic32mx7mmb" if ARCH_BOARD_PIC32_PIC32MX7MMB

27
configs/README.txt
View File

@ -1780,14 +1780,36 @@ configs/pcblogic-pic32mx
STATUS: Code complete but testing has been stalled due to tool related problems
(PICkit 2 does not work with the PIC32).
configs/pic32-starterkit
configs/p112
The P112 is notable because it was the first of the hobbyist single board
computers to reach the production stage. The P112 hobbyist computers
were relatively widespread and inspired other hobbyist centered home brew
computing projects such as N8VEM home brew computing project. The P112
project still maintains many devoted enthusiasts and has an online
repository of software and other information.
The P112 computer originated as a commercial product of "D-X Designs Pty
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
boards was discussed. David Griffith decided to produce additional P112 kits
with Dave Brooks blessing and the assistance of others. In addition Terry
Gulczynski makes additional P112 derivative hobbyist home brew computers.
Hal Bower was very active in the mid 1990's on the P112 project and ported
the "Banked/Portable BIOS".
configs/pic32-starterkit
This directory contains the port of NuttX to the Microchip PIC32 Ethernet
Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005).
See www.microchip.com for further information.
configs/pic32mx7mmb
This directory will (eventually) contain the port of NuttX to the
Mikroelektronika PIC32MX7 Multimedia Board (MMB). See
http://www.mikroe.com/ for further information.
@ -1797,7 +1819,6 @@ configs/pjrc-8051
and the SDCC toolchain. This port is not quite ready for prime time.
configs/qemu-i486
Port of NuttX to QEMU in i486 mode. This port will also run on real i486
hardwared (Google the Bifferboard).

4
configs/p112/Kconfig Normal file
View File

@ -0,0 +1,4 @@
#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#

26
configs/p112/README.txt Normal file
View File

@ -0,0 +1,26 @@
P112 README
^^^^^^^^^^^
The P112 is notable because it was the first of the hobbyist single board
computers to reach the production stage. The P112 hobbyist computers
were relatively widespread and inspired other hobbyist centered home brew
computing projects such as N8VEM home brew computing project. The P112
project still maintains many devoted enthusiasts and has an online
repository of software and other information.
The P112 computer originated as a commercial product of "D-X Designs Pty
Ltd" of Australia. They describe the computer as "The P112 is a stand-alone
8-bit CPU board. Typically running CP/M (tm) or a similar operating system,
it provides a Z80182 (Z-80 upgrade) CPU with up to 1MB of memory, serial,
parallel and diskette IO, and realtime clock, in a 3.5-inch drive form factor.
Powered solely from 5V, it draws 150mA (nominal: not including disk drives)
with a 16MHz CPU clock. Clock speeds up to 24.576MHz are possible."
The P112 board was last available new in 1996 by Dave Brooks. In late 2004
on the Usenet Newsgroup comp.os.cpm, talk about making another run of P112
boards was discussed. David Griffith decided to produce additional P112 kits
with Dave Brooks blessing and the assistance of others. In addition Terry
Gulczynski makes additional P112 derivative hobbyist home brew computers.
Hal Bower was very active in the mid 1990's on the P112 project and ported
the "Banked/Portable BIOS".

60
configs/p112/include/board.h Normal file
View File

@ -0,0 +1,60 @@
/************************************************************
* configs/p112/include/board.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************/
#ifndef __CONFIGS_P112_INCLUDE_BOARD_H
#define __CONFIGS_P112_INCLUDE_BOARD_H
/************************************************************
* Included Files
************************************************************/
/************************************************************
* Definitions
************************************************************/
/************************************************************
* Public Functions
************************************************************/
#if defined(__cplusplus)
extern "C"
{
#endif
#if defined(__cplusplus)
}
#endif
#endif /* __CONFIGS_P112_INCLUDE_BOARD_H */

167
configs/p112/ostest/Make.defs Normal file
View File

@ -0,0 +1,167 @@
############################################################################
# configs/p112/ostest/Make.defs
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
# These are the directories where the SDCC toolchain is installed. NOTE
# that short 8.3 path names are used in order to avoid spaces. On my machine
# I have:
#
# C:\PROGRA~1\ = C:\Profram Files\
# C:\PROGRA~2\ = C:\Program Files (x86)\
#
# Your PC may be configured differently.
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
SDCC_INSTALLDIR = C:\PROGRA~2\SDCC
SDCC_BINDIR = $(SDCC_INSTALLDIR)\bin
SDCC_LIBDIR = $(SDCC_INSTALLDIR)\lib\z180
else
SDCC_INSTALLDIR = /usr/local
SDCC_BINDIR = $(SDCC_INSTALLDIR)/bin
SDCC_LIBDIR = $(SDCC_INSTALLDIR)/share/sdcc/lib/z180
endif
CROSSDEV =
CC = sdcc
CPP = sdcpp
LD = sdldz80
AS = sdasz80
AR = sdar -r
ARCHCPUFLAGS = -mz180
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = --debug
else
ARCHOPTIMIZATION =
endif
ARCHPICFLAGS =
ARCHWARNINGS =
ARCHDEFINES =
ARCHINCLUDES = -I. -I$(TOPDIR)$(DELIM)include
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = -x -a -l -o -s -g
SDCCLIB = z180.lib
ASMEXT = .asm
OBJEXT = .o
LIBEXT = .lib
EXEEXT = .hex
# Custom ASSEMBLE definition. The most common toolchain, GCC, uses the
# compiler to assemble files because this has the advantage of running the C
# Pre-Processor against. This is not possible with other SDCC; we need to
# define AS and over-ride the common definition in order to use the assembler
# directly.
define ASSEMBLE
@echo "AS: $1"
$(Q) $(AS) $(AFLAGS) $2 $1
endef
# Custom CLEAN definition
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
define CLEAN
$(Q) if exist *.o (del /f /q *.o)
$(Q) if exist *.asm (del /f /q *.asm)
$(Q) if exist *.rel (del /f /q *.rel)
$(Q) if exist *.lst (del /f /q *.lst)
$(Q) if exist *.rst (del /f /q *.rst)
$(Q) if exist *.sym (del /f /q *.sym)
$(Q) if exist *.adb (del /f /q *.adb)
$(Q) if exist *.lnk (del /f /q *.lnk)
$(Q) if exist *.map (del /f /q *.map)
$(Q) if exist *.mem (del /f /q *.mem)
$(Q) if exist *.hex (del /f /q *.hex)
$(Q) if exist *.cmd (del /f /q *.cmd)
endef
else
define CLEAN
$(Q) rm -f *.o *.asm *.rel *.lst *.rst *.sym *.adb *.lnk *.map *.mem *.hex *.cmd
endef
endif
# Windows native host tool definitions
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
HOSTCC = mingw32-gcc.exe
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
HOSTEXEEXT = .exe
# Windows-native host tools
MKDEP = $(TOPDIR)\tools\mkdeps.exe --winnative
# Use NTFS links or directory copies
ifeq ($(CONFIG_WINDOWS_MKLINK),y)
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)link.bat
else
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.bat
endif
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.bat
else
# Linux/Cygwin host tool definitions
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
# This is the tool to use for dependencies (i.e., none)
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
# SDCC for Linux, OSX, or Cygwin understands symbolic links. Windows SDCC
# running under Cygwin does not
ifeq ($(WINTOOL),y)
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
else
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)link.sh
endif
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
endif

530
configs/p112/ostest/defconfig Normal file
View File

@ -0,0 +1,530 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
# CONFIG_HOST_LINUX is not set
# CONFIG_HOST_OSX is not set
CONFIG_HOST_WINDOWS=y
# CONFIG_HOST_OTHER is not set
CONFIG_WINDOWS_NATIVE=y
# CONFIG_WINDOWS_CYGWIN is not set
# CONFIG_WINDOWS_MSYS is not set
# CONFIG_WINDOWS_OTHER is not set
# CONFIG_WINDOWS_MKLINK is not set
#
# Build Configuration
#
# CONFIG_APPS_DIR="..\apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
# CONFIG_INTELHEX_BINARY is not set
# CONFIG_MOTOROLA_SREC is not set
# CONFIG_RAW_BINARY is not set
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_SYMBOLS is not set
#
# System Type
#
# CONFIG_ARCH_8051 is not set
# CONFIG_ARCH_ARM is not set
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
CONFIG_ARCH_Z80=y
CONFIG_ARCH="z80"
CONFIG_ARCH_CHIP="z180"
CONFIG_BOARD_LOOPSPERMSEC=100
# CONFIG_ARCH_CHIP_Z80 is not set
# CONFIG_ARCH_CHIP_Z8018006VSG is not set
# CONFIG_ARCH_CHIP_Z8018010VSG is not set
# CONFIG_ARCH_CHIP_Z8018008VSG is not set
# CONFIG_ARCH_CHIP_Z8018010FSG is not set
# CONFIG_ARCH_CHIP_Z8018008VEG is not set
# CONFIG_ARCH_CHIP_Z8018006VEG is not set
# CONFIG_ARCH_CHIP_Z8018006PSG is not set
# CONFIG_ARCH_CHIP_Z8018008FSG is not set
# CONFIG_ARCH_CHIP_Z8018010PSG is not set
# CONFIG_ARCH_CHIP_Z8018006PEG is not set
# CONFIG_ARCH_CHIP_Z8018010VEG is not set
# CONFIG_ARCH_CHIP_Z8018010PEG is not set
# CONFIG_ARCH_CHIP_Z8018008PSG is not set
# CONFIG_ARCH_CHIP_Z8018006FSG is not set
# CONFIG_ARCH_CHIP_Z8018000XSO is not set
# CONFIG_ARCH_CHIP_Z8018010FEG is not set
# CONFIG_ARCH_CHIP_Z8018000WSO is not set
# CONFIG_ARCH_CHIP_Z8018008PEG is not set
# CONFIG_ARCH_CHIP_Z8018110FEG is not set
# CONFIG_ARCH_CHIP_Z8018233FSG is not set
# CONFIG_ARCH_CHIP_Z8018220AEG is not set
CONFIG_ARCH_CHIP_Z8018216FSG=y
# CONFIG_ARCH_CHIP_Z8018216ASG is not set
# CONFIG_ARCH_CHIP_Z8018233ASG is not set
# CONFIG_ARCH_CHIP_Z8019520FSG is not set
# CONFIG_ARCH_CHIP_Z8019533FSG is not set
# CONFIG_ARCH_CHIP_Z8L18020VSG is not set
# CONFIG_ARCH_CHIP_Z8L18020FSG is not set
# CONFIG_ARCH_CHIP_Z8L18020PSG is not set
# CONFIG_ARCH_CHIP_Z8L18220ASG is not set
# CONFIG_ARCH_CHIP_Z8L18220FSG is not set
# CONFIG_ARCH_CHIP_Z8L18220AEG is not set
# CONFIG_ARCH_CHIP_Z8S18020VSG is not set
# CONFIG_ARCH_CHIP_Z8S18020VSG1960 is not set
# CONFIG_ARCH_CHIP_Z8S18033VSG is not set
# CONFIG_ARCH_CHIP_Z8S18010FSG is not set
# CONFIG_ARCH_CHIP_Z8S18010VEG is not set
# CONFIG_ARCH_CHIP_Z8S18020VEG is not set
# CONFIG_ARCH_CHIP_Z8S18010VSG is not set
# CONFIG_ARCH_CHIP_Z8S18020PSG is not set
# CONFIG_ARCH_CHIP_Z8S18033FSG is not set
# CONFIG_ARCH_CHIP_Z8S18033FEG is not set
# CONFIG_ARCH_CHIP_Z8S18020FSG is not set
# CONFIG_ARCH_CHIP_Z8S18033VEG is not set
# CONFIG_ARCH_CHIP_Z8S18010PSG is not set
# CONFIG_ARCH_CHIP_Z8S18020FEG is not set
# CONFIG_ARCH_CHIP_Z8S18010PEG is not set
# CONFIG_ARCH_CHIP_Z8S18010FEG is not set
# CONFIG_ARCH_CHIP_Z8F6403 is not set
# CONFIG_ARCH_CHIP_Z8F6423 is not set
# CONFIG_ARCH_CHIP_EZ80F91 is not set
# CONFIG_ARCH_CHIP_EZ80F92 is not set
# CONFIG_ARCH_CHIP_EZ80F93 is not set
CONFIG_ARCH_CHIP_Z180=y
CONFIG_ARCH_CHIP_Z80182=y
CONFIG_LINKER_HOME_AREA=0x0000
CONFIG_LINKER_CODE_AREA=0x0200
CONFIG_LINKER_DATA_AREA=0x8000
# CONFIG_LINKER_ROM_AT_0000 is not set
# CONFIG_ARCH_HAVEHEAD is not set
# CONFIG_Z180_TOOLCHAIN_SDCCL is not set
CONFIG_Z180_TOOLCHAIN_SDCCW=y
CONFIG_Z180_BANKAREA_VIRTBASE=0x8000
CONFIG_Z180_BANKAREA_PHYSBASE=0x08000
CONFIG_Z180_COMMON1AREA_VIRTBASE=0xc000
CONFIG_Z180_PHYSHEAP_START=0x0c000
CONFIG_Z180_PHYSHEAP_END=0x100000
#
# Z180 Peripheral Support
#
CONFIG_Z180_UART0=y
CONFIG_Z180_UART1=y
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_DMA is not set
# CONFIG_ARCH_IRQPRIO is not set
# CONFIG_CUSTOM_STACK is not set
CONFIG_ADDRENV=y
# CONFIG_ARCH_STACKDUMP is not set
# CONFIG_ENDIAN_BIG is not set
#
# Board Settings
#
CONFIG_DRAM_START=0x0000
CONFIG_DRAM_SIZE=65536
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
CONFIG_ARCH_BOARD_P112=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="p112"
#
# Common Board Options
#
#
# Board-Specific Options
#
#
# RTOS Features
#
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=0
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2007
CONFIG_START_MONTH=2
CONFIG_START_DAY=21
# CONFIG_DEV_CONSOLE is not set
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_SCHED_WAITPID is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="ostest_main"
CONFIG_DISABLE_OS_API=y
CONFIG_DISABLE_CLOCK=y
CONFIG_DISABLE_POSIX_TIMERS=y
CONFIG_DISABLE_PTHREAD=y
CONFIG_DISABLE_SIGNALS=y
CONFIG_DISABLE_MQUEUE=y
CONFIG_DISABLE_MOUNTPOINT=y
CONFIG_DISABLE_ENVIRON=y
CONFIG_DISABLE_POLL=y
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=8
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=0
CONFIG_NFILE_DESCRIPTORS=0
CONFIG_NFILE_STREAMS=0
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=0
CONFIG_MQ_MAXMSGSIZE=0
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=0
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=1024
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=1024
#
# Device Drivers
#
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
CONFIG_DEV_LOWCONSOLE=y
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_UART0=y
CONFIG_ARCH_HAVE_UART1=y
CONFIG_MCU_SERIAL=y
CONFIG_UART0_SERIAL_CONSOLE=y
# CONFIG_UART1_SERIAL_CONSOLE is not set
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# UART0 Configuration
#
CONFIG_UART0_RXBUFSIZE=64
CONFIG_UART0_TXBUFSIZE=64
CONFIG_UART0_BAUD=115200
CONFIG_UART0_BITS=8
CONFIG_UART0_PARITY=0
CONFIG_UART0_2STOP=0
#
# UART1 Configuration
#
CONFIG_UART1_RXBUFSIZE=64
CONFIG_UART1_TXBUFSIZE=64
CONFIG_UART1_BAUD=115200
CONFIG_UART1_BITS=8
CONFIG_UART1_PARITY=0
CONFIG_UART1_2STOP=0
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
# CONFIG_FS_RAMMAP is not set
#
# System Logging
#
# CONFIG_SYSLOG is not set
#
# Graphics Support
#
# CONFIG_NX is not set
#
# Memory Management
#
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=1
CONFIG_ARCH_HAVE_HEAP2=y
CONFIG_HEAP2_BASE=0x00000000
CONFIG_HEAP2_SIZE=0
# CONFIG_GRAN is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
# CONFIG_PIC is not set
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
#
# Library Routines
#
CONFIG_STDIO_BUFFER_SIZE=0
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=0
# CONFIG_LIBM is not set
CONFIG_NOPRINTF_FIELDWIDTH=y
# CONFIG_LIBC_FLOATINGPOINT is not set
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
# CONFIG_HAVE_CXX is not set
#
# Application Configuration
#
#
# Named Applications
#
# CONFIG_NAMEDAPP is not set
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_CDCACM is not set
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_NETTEST is not set
# CONFIG_EXAMPLES_NSH is not set
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
CONFIG_EXAMPLES_OSTEST=y
# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
CONFIG_EXAMPLES_OSTEST_LOOPS=1
CONFIG_EXAMPLES_OSTEST_STACKSIZE=1024
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=4
CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POLL is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
# CONFIG_EXAMPLES_WLAN is not set
#
# Interpreters
#
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# ModBus
#
#
# FreeModbus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
# CONFIG_NSH_LIBRARY is not set
#
# NxWidgets/NxWM
#
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# readline()
#
# CONFIG_SYSTEM_READLINE is not set
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
# CONFIG_SYSTEM_SYSINFO is not set

50
configs/p112/ostest/setenv.bat Normal file
View File

@ -0,0 +1,50 @@
@echo off
rem configs/p112/ostest/setenv.bat
rem
rem Copyright (C) 2012 Gregory Nutt. All rights reserved.
rem Author: Gregory Nutt <gnutt@nuttx.org>
rem
rem Redistribution and use in source and binary forms, with or without
rem modification, are permitted provided that the following conditions
rem are met:
rem
rem 1. Redistributions of source code must retain the above copyright
rem notice, this list of conditions and the following disclaimer.
rem 2. Redistributions in binary form must reproduce the above copyright
rem notice, this list of conditions and the following disclaimer in
rem the documentation and/or other materials provided with the
rem distribution.
rem 3. Neither the name NuttX nor the names of its contributors may be
rem used to endorse or promote products derived from this software
rem without specific prior written permission.
rem
rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
rem POSSIBILITY OF SUCH DAMAGE.
rem This is the location where I installed in the MinGW compiler. With
rem this configuration, it is recommended that you do NOT install the
rem MSYS tools; they conflict with the GNUWin32 tools. See
rem http://www.mingw.org/ for further info.
set PATH=C:\MinGW\bin;%PATH%
rem This is the location where I installed the SDCC toolchain for windows.
set PATH=C:\Program Files (x86)\SDCC/bin;%PATH%
rem This is the location where I installed the GNUWin32 tools. See
rem http://gnuwin32.sourceforge.net/.
set PATH=C:\gnuwin32\bin;%PATH%
echo %PATH%

50
configs/p112/scripts/setenv.bat Normal file
View File

@ -0,0 +1,50 @@
@echo off
rem configs/p112/scripts/setenv.bat
rem
rem Copyright (C) 2012 Gregory Nutt. All rights reserved.
rem Author: Gregory Nutt <gnutt@nuttx.org>
rem
rem Redistribution and use in source and binary forms, with or without
rem modification, are permitted provided that the following conditions
rem are met:
rem
rem 1. Redistributions of source code must retain the above copyright
rem notice, this list of conditions and the following disclaimer.
rem 2. Redistributions in binary form must reproduce the above copyright
rem notice, this list of conditions and the following disclaimer in
rem the documentation and/or other materials provided with the
rem distribution.
rem 3. Neither the name NuttX nor the names of its contributors may be
rem used to endorse or promote products derived from this software
rem without specific prior written permission.
rem
rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
rem POSSIBILITY OF SUCH DAMAGE.
rem This is the location where I installed in the MinGW compiler. With
rem this configuration, it is recommended that you do NOT install the
rem MSYS tools; they conflict with the GNUWin32 tools. See
rem http://www.mingw.org/ for further info.
set PATH=C:\MinGW\bin;%PATH%
rem This is the location where I installed the SDCC toolchain for windows.
set PATH=C:\Program Files (x86)\SDCC/bin;%PATH%
rem This is the location where I installed the GNUWin32 tools. See
rem http://gnuwin32.sourceforge.net/.
set PATH=C:\gnuwin32\bin;%PATH%
echo %PATH%

66
configs/p112/scripts/setenv.sh Executable file
View File

@ -0,0 +1,66 @@
#!/bin/bash
# configs/p112/ostest/setenv.sh
#
# Copyright (C) 2007, 2008, 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
#
# This is the normal installation directory for SDCC under Linux, OSX
# or Linux:
#
export TOOLCHAIN_BIN=/usr/local/bin
#
# This is the normal installation directory for SDCC under Windows
#
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/SDCC/bin"
#
# Add the path to the toolchain to the PATH varialble
#
export PATH="${TOOLCHAIN_BIN}":/sbin:/usr/sbin:${PATH_ORIG}
echo "PATH : ${PATH}"

77
configs/p112/src/Makefile Normal file
View File

@ -0,0 +1,77 @@
############################################################################
# configs/p112/src/Makefile
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
CFLAGS += -I$(TOPDIR)$(DELIM)sched
CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)common
CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)z180
ASRCS =
AOBJS = $(ASRCS:$(ASMEXT)=$(OBJEXT))
CSRCS =
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)
CFLAGS += -I $(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src
all: libboard$(LIBEXT)
$(AOBJS): %$(OBJEXT): %$(ASMEXT)
$(call ASSEMBLE, $<, $@)
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
libboard$(LIBEXT): $(OBJS)
$(call ARCHIVE, $@, $(OBJS))
.depend: Makefile $(SRCS)
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
$(Q) touch $@
depend: .depend
clean:
$(call DELFILE, libboard$(LIBEXT))
$(call CLEAN)
distclean: clean
$(call DELFILE, Make.dep)
$(call DELFILE, .depend)
-include Make.dep

2
configs/z80sim/src/Makefile
View File

@ -36,7 +36,7 @@
-include $(TOPDIR)/Make.defs
CFLAGS += -I$(TOPDIR)$(DELIM)sched
CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)common -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)z80
CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)common
CFLAGS += -I$(TOPDIR)$(DELIM)arch$(DELIM)z80$(DELIM)src$(DELIM)z80
ASRCS =