sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add support for the MikroElektronika Mikromedia for STM32F4 development board. From Ken Petit

Browse Source
This commit is contained in:
Gregory Nutt 2013-04-30 18:31:47 -06:00
parent ab61a0c466
commit c73bd9b906
28 changed files with 84 additions and 70 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ChangeLog
View File

@ -4650,3 +4650,5 @@
tools (20130-4-30).
* configs/sim/mtdpart: A new configuration to test MTD
partitions (2013-4-30).
* configs/sim/mkroe-stm32f4: Support for the MikroElektronika
Mikromedia for STM32F4 development board (from Ken Petit, 2013-4-30).

7
Documentation/NuttShell.html
View File

@ -8,7 +8,7 @@
<tr align="center" bgcolor="#e4e4e4">
<td>
<h1><big><font color="#3c34ec"><i>NuttShell (NSH)</i></font></big></h1>
<p>Last Updated: November 27, 2012</p>
<p>Last Updated: April 30, 2013</p>
</td>
</tr>
</table>
@ -1001,7 +1001,7 @@ nsh&gt; dd if=/dev/ram0 of=/dev/null
</table>
<p><b>Command Syntax:</b></p>
<ul><pre>
df
df [-h]
</pre></ul>
<p>
<b>Synopsis</b>.
@ -1019,6 +1019,9 @@ nsh> df
512 985 2 983 /tmp
nsh>
</pre></ul>
<p>
If <code>CONFIG_NSH_CMDOPT_DF_H</code> is defined in the NuttX configuration, the the <code>df</code> will also support an option <code>-h</code> which may be used to show the the volume information in <i>human readable</i> format.
</p>
<table width ="100%">
<tr bgcolor="#e4e4e4">

11
configs/Kconfig
View File

@ -546,6 +546,13 @@ config ARCH_BOARD_STM32F4_DISCOVERY
---help---
STMicro STM32F4-Discovery board based on the STMicro STM32F407VGT6 MCU.
config ARCH_BOARD_MIKROE_STM32F4
bool "MikroElektronika Mikromedia for STM32F4 board"
depends on ARCH_CHIP_STM32F407VG
---help---
This is the port NuttX to the Mikroelektronika Mikromedia for STM32F4 Multimedia Board
(MMB). See http://www.mikroe.com/ for further information.
config ARCH_BOARD_SUREPIC32MX
bool "Sure PIC32MX boards"
depends on ARCH_CHIP_PIC32MX440F512H
@ -747,6 +754,7 @@ config ARCH_BOARD
default "stm32f100rc_generic" if ARCH_BOARD_STM32F100RC_GENERIC
default "stm32f3discovery" if ARCH_BOARD_STM32F3_DISCOVERY
default "stm32f4discovery" if ARCH_BOARD_STM32F4_DISCOVERY
default "mikroe-stm32f4" if ARCH_BOARD_MIKROE_STM32F4
default "sure-pic32mx" if ARCH_BOARD_SUREPIC32MX
default "teensy" if ARCH_BOARD_TEENSY
default "twr-k60n512" if ARCH_BOARD_TWR_K60N512
@ -971,6 +979,9 @@ endif
if ARCH_BOARD_STM32F4_DISCOVERY
source "configs/stm32f4discovery/Kconfig"
endif
if ARCH_BOARD_MIKROE_STM32F4
source "configs/mikroe-stm32f4/Kconfig"
endif
if ARCH_BOARD_SUREPIC32MX
source "configs/sure-pic32mx/Kconfig"
endif

4
configs/README.txt
View File

@ -1816,6 +1816,10 @@ configs/mbed
that features the NXP LPC1768 microcontroller. This OS is also built
with the arm-nuttx-elf toolchain*. STATUS: Contributed.
configs/mikroe-stm32f4
This is the port of NuttX to the MikroElektronika Mikromedia for STM32F4
development board. Contributed by Ken Petit.
configs/mcu123-lpc214x
This port is for the NXP LPC2148 as provided on the mcu123.com
lpc214x development board. This OS is also built with the arm-nuttx-elf

26
configs/mikroe-stm32f4/README.txt
View File

@ -40,7 +40,7 @@ GNU Toolchain Options
toolchain options.
1. The CodeSourcery GNU toolchain,
2. The Atollic Toolchain,
2. The Atollic Toolchain,
3. The devkitARM GNU toolchain,
4. Raisonance GNU toolchain, or
5. The NuttX buildroot Toolchain (see below).
@ -119,7 +119,7 @@ GNU Toolchain Options
In order to compile successfully. Otherwise, you will get errors like:
"C++ Compiler only available in TrueSTUDIO Professional"
The make may then fail in some of the post link processing because of some of
the other missing tools. The Make.defs file replaces the ar and nm with
the default system x86 tool versions and these seem to work okay. Disable all
@ -141,7 +141,7 @@ IDEs
NuttX is built using command-line make. It can be used with an IDE, but some
effort will be required to create the project.
Makefile Build
--------------
Under Eclipse, it is pretty easy to set up an "empty makefile project" and
@ -238,7 +238,7 @@ NXFLAT Toolchain
tools -- just the NXFLAT tools. The buildroot with the NXFLAT tools can
be downloaded from the NuttX SourceForge download site
(https://sourceforge.net/projects/nuttx/files/).
This GNU toolchain builds and executes in the Linux or Cygwin environment.
1. You must have already configured Nuttx in <some-dir>/nuttx.
@ -296,7 +296,7 @@ USART2
Default USART/UART Configuration
--------------------------------
USART2 is enabled in all configurations (see */defconfig). RX and TX are
configured on pins PD6 and PD5, respectively (see include/board.h).
@ -411,7 +411,7 @@ the following lines in each Make.defs file:
If you are using a toolchain other than the Atollic toolchain, then to use the FPU
you will also have to modify the CFLAGS to enable compiler support for the ARMv7-M
FPU. As of this writing, there are not many GCC toolchains that will support the
ARMv7-M FPU.
ARMv7-M FPU.
As a minimum you will need to add CFLAG options to (1) enable hardware floating point
code generation, and to (2) select the FPU implementation. You might try the same
@ -475,7 +475,7 @@ Mikroe-STM32F4-specific Configuration Options
configuration features.
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
hence, the board that supports the particular chip or SoC.
@ -619,7 +619,7 @@ Mikroe-STM32F4-specific Configuration Options
configuration settings:
CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4}
NOTE: The STM32 timers are each capable of generating different signals on
each of the four channels with different duty cycles. That capability is
not supported by this driver: Only one output channel per timer.
@ -676,7 +676,7 @@ Mikroe-STM32F4-specific Configuration Options
CONFIG_SDIO_DMA - Support DMA data transfers. Requires CONFIG_STM32_SDIO
and CONFIG_STM32_DMA2.
CONFIG_SDIO_PRI - Select SDIO interrupt prority. Default: 128
CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority.
CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority.
Default: Medium
CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default:
4-bit transfer mode.
@ -684,15 +684,15 @@ Mikroe-STM32F4-specific Configuration Options
STM32 USB OTG FS Host Driver Support
Pre-requisites
CONFIG_USBDEV - Enable USB device support
CONFIG_USBHOST - Enable USB host support
CONFIG_STM32_OTGFS - Enable the STM32 USB OTG FS block
CONFIG_STM32_SYSCFG - Needed
CONFIG_SCHED_WORKQUEUE - Worker thread support is required
Options:
CONFIG_STM32_OTGFS_RXFIFO_SIZE - Size of the RX FIFO in 32-bit words.
Default 128 (512 bytes)
CONFIG_STM32_OTGFS_NPTXFIFO_SIZE - Size of the non-periodic Tx FIFO
@ -734,7 +734,7 @@ Where <subdir> is one of the following:
builtin RS-232 drivers.
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:

4
configs/mikroe-stm32f4/include/board.h
View File

@ -2,7 +2,7 @@
* configs/mikroe-stm32f4/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -150,7 +150,7 @@
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
* otherwise frequency is 2xAPBx.
* otherwise frequency is 2xAPBx.
* Note: TIM1,8 are on APB2, others on APB1
*/

4
configs/mikroe-stm32f4/nsh/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm32f4discovery/nsh/Make.defs
#
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -49,7 +49,7 @@ ifeq ($(WINTOOL),y)
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx

2
configs/mikroe-stm32f4/nsh/setenv.sh Normal file → Executable file
View File

@ -1,7 +1,7 @@
#!/bin/bash
# configs/stm32f4discovery/nsh/setenv.sh
#
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without

2
configs/mikroe-stm32f4/scripts/gnu-elf.ld
View File

@ -1,7 +1,7 @@
/****************************************************************************
* configs/mikroe-stm32f4/scripts/gnu-elf.ld
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without

2
configs/mikroe-stm32f4/scripts/ld.script
View File

@ -1,7 +1,7 @@
/****************************************************************************
* configs/mikroe-stm32f4/scripts/ld.script
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without

4
configs/mikroe-stm32f4/src/Makefile
View File

@ -1,7 +1,7 @@
############################################################################
# configs/mikroe-stm32f4/src/Makefile
#
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Updates: 04/15/2013 - Ken Pettit
@ -41,7 +41,7 @@
CFLAGS += -I$(TOPDIR)/sched
ASRCS =
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = up_boot.c up_spi.c

4
configs/mikroe-stm32f4/src/mikroe-stm32f4-internal.h
View File

@ -2,7 +2,7 @@
* configs/mikroe-stm32f4/src/mikroe-stm32f4-internal.h
* arch/arm/src/board/mikroe-stm32f4-internal.n
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -98,7 +98,7 @@
GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN0)
#define GPIO_SD_CD (GPIO_INPUT|GPIO_PORTD|GPIO_PIN15)
/* USB OTG FS
/* USB OTG FS
*
* PA9 OTG_FS_VBUS VBUS sensing (also connected to the green LED)
* PC0 OTG_FS_PowerSwitchOn

5
configs/mikroe-stm32f4/src/up_boot.c
View File

@ -2,7 +2,7 @@
* configs/mikroe_stm32f4/src/up_boot.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -83,7 +83,7 @@ void stm32_boardinitialize(void)
#endif
/* Initialize USB if the 1) OTG FS controller is in the configuration and 2)
* disabled, and 3) the weak function stm32_usbinitialize() has been brought
* disabled, and 3) the weak function stm32_usbinitialize() has been brought
* into the build. Presumeably either CONFIG_USBDEV or CONFIG_USBHOST is also
* selected.
*/
@ -94,5 +94,4 @@ void stm32_boardinitialize(void)
stm32_usbinitialize();
}
#endif
}

8
configs/mikroe-stm32f4/src/up_clockconfig.c
View File

@ -74,10 +74,10 @@ void stm32_board_clockconfig(void)
{
uint32_t regval;
/* Configure chip clocking to use the internal 16Mhz RC oscillator.
NOTE: We will assume the HSIRDY (High Speed Internal RC Ready) bit is
set, otherwise we wouldn't be here executing code.
/* Configure chip clocking to use the internal 16Mhz RC oscillator.
*
* NOTE: We will assume the HSIRDY (High Speed Internal RC Ready) bit is
* set, otherwise we wouldn't be here executing code.
*/
regval = getreg32(STM32_RCC_APB1ENR);

3
configs/mikroe-stm32f4/src/up_cxxinitialize.c
View File

@ -2,7 +2,7 @@
* configs/mikroe_stm32f4/src/up_cxxinitialize.c
* arch/arm/src/board/up_cxxinitialize.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -152,4 +152,3 @@ void up_cxxinitialize(void)
}
#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */

4
configs/mikroe-stm32f4/src/up_extmem.c
View File

@ -1,8 +1,8 @@
/************************************************************************************
* configs/stm32f4disovery/src/up_extmem.c
* configs/mikroe_stm32f4/src/up_extmem.c
* arch/arm/src/board/up_extmem.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without

2
configs/mikroe-stm32f4/src/up_idle.c
View File

@ -2,7 +2,7 @@
* configs/mikroe_stm32f4/src/up_idle.c
* arch/arm/src/board/up_idle.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* Diego Sanchez <dsanchez@nx-engineering.com>
*

16
configs/mikroe-stm32f4/src/up_mio283qt2.c
View File

@ -5,7 +5,7 @@
* Interface definition for the MI0283QT-2 LCD from Multi-Inno Technology Co., Ltd.
* This LCD is based on the Himax HX8347-D LCD controller.
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -36,7 +36,7 @@
* POSSIBILITY OF SUCH DAMAGE.
*
**************************************************************************************/
/**************************************************************************************
* Included Files
**************************************************************************************/
@ -92,14 +92,14 @@
* 6 RC1/T2CK LCD_RST TFT display
* 43 PMA1/AETXD3/AN14/ERXD2/PMALH/RB14 LCD-CS# TFT display, HDR2 pin 3
* 77 OC3/RD2 LCD_BLED LCD backlight LED
* 44 PMA0/AETXD2/AN15/CN12/ERXD3/OCFB/ LCD-RS TFT display
* 44 PMA0/AETXD2/AN15/CN12/ERXD3/OCFB/ LCD-RS TFT display
* PMALL/RB15
*
* 34 PMA13/AN10/RB10/CVREFOUT LCD-YD TFT display
* 35 PMA12/AETXERR/AN11/ERXERR/RB11 LCD-XR TFT display
* 41 PMA11/AECRS/AN12/ERXD0/RB12 LCD-YU TFT display
* 42 PMA10/AECOL/AN13/ERXD1/RB13 LCD-XL TFT display
*
*
* 93 PMD0/RE0 PMPD0 TFT display, HDR1 pin 18
* 94 PMD1/RE1 PMPD1 TFT display, HDR1 pin 17
* 98 PMD2/RE2 PMPD2 TFT display, HDR1 pin 16
@ -116,9 +116,9 @@
* 80 PMD13/CN19/ETXD3/RD13 PMPD13 TFT display, HDR1 pin 5
* 83 PMD14/CN15/ETXEN/RD6 PMPD14 TFT display, HDR1 pin 4
* 84 PMD15/CN16/ETXCLK/RD7 PMPD15 TFT display, HDR1 pin 3
*
* 82 CN14/PMRD/RD5 PMPRD
* 81 CN13/OC5/PMWR/RD4 PMPWR
*
* 82 CN14/PMRD/RD5 PMPRD
* 81 CN13/OC5/PMWR/RD4 PMPWR
*/
/* RC1, Reset -- Low value holds in reset */
@ -549,5 +549,3 @@ void pic32mx_lcdinitialize(void)
pic32mx_configgpio(GPIO_LCD_BLED);
#endif
}

11
configs/mikroe-stm32f4/src/up_nsh.c
View File

@ -2,7 +2,7 @@
* config/mikroe_stm32f4/src/up_nsh.c
* arch/arm/src/board/up_nsh.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -192,6 +192,7 @@ int nsh_archinitialize(void)
message("nsh_archinitialize: Failed to initialize SPI port 3\n");
return -ENODEV;
}
message("nsh_archinitialize: Successfully initialized SPI port 3\n");
/* Now bind the SPI interface to the M25P8 SPI FLASH driver */
@ -208,6 +209,7 @@ int nsh_archinitialize(void)
message("nsh_archinitialize: Successfully bound SPI port 3 to the SPI FLASH driver\n");
/* Now initialize a SMART Flash block device and bind it to the MTD device */
#if defined(CONFIG_MTD_SMART) && defined(CONFIG_FS_SMARTFS)
smart_initialize(0, mtd);
#endif
@ -216,7 +218,6 @@ int nsh_archinitialize(void)
/* Create a RAM MTD device if configured */
#ifdef CONFIG_MTD_RAM
{
uint8_t *start = (uint8_t *) kmalloc(CONFIG_EXAMPLES_SMART_BUFSIZE);
mtd = rammtd_initialize(start, CONFIG_EXAMPLES_SMART_BUFSIZE);
@ -231,9 +232,7 @@ int nsh_archinitialize(void)
#endif /* CONFIG_MTD_RAM */
#endif /* CONFIG_MTD */
//#warning "Now what are we going to do with this SPI FLASH driver?"
#endif
#endif /* CONFIG_STM32_SPI3 */
/* Create the SPI FLASH MTD instance */
/* The M25Pxx is not a good media to implement a file system..
@ -255,7 +254,7 @@ int nsh_archinitialize(void)
else
{
message("nsh_archinitialize: Successfully bound SPI to the MMC/SD driver\n");
}
#endif

2
configs/mikroe-stm32f4/src/up_pm.c
View File

@ -2,7 +2,7 @@
* configs/mikroe_stm32f4/src/up_pm.c
* arch/arm/src/board/up_pm.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* Diego Sanchez <dsanchez@nx-engineering.com>
*

2
configs/mikroe-stm32f4/src/up_pwm.c
View File

@ -2,7 +2,7 @@
* configs/mikroe_stm32f4/src/up_pwm.c
* arch/arm/src/board/up_pwm.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without

2
configs/mikroe-stm32f4/src/up_qencoder.c
View File

@ -2,7 +2,7 @@
* configs/mikroe_stm32f4/src/up_qencoder.c
* arch/arm/src/board/up_qencoder.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without

6
configs/mikroe-stm32f4/src/up_spi.c
View File

@ -2,7 +2,7 @@
* configs/mikroe_stm32f4/src/up_spi.c
* arch/arm/src/board/up_spi.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Modifications:
@ -179,7 +179,8 @@ void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool sele
else
#endif
/* Must be the expansion header device */
/* Must be the expansion header device */
if (devid == SPIDEV_EXPANDER)
{
stm32_gpiowrite(GPIO_CS_EXP_SPI3, !selected);
@ -194,6 +195,7 @@ uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
if (devid == SPIDEV_MMCSD)
{
/* A low value indicates the card is present */
if (!stm32_gpioread(GPIO_SD_CD))
{
ret = SPI_STATUS_PRESENT;

12
configs/mikroe-stm32f4/src/up_touchscreen.c
View File

@ -2,7 +2,7 @@
* configs/pic32mx7mmb/src/up_boot.c
* arch/mips/src/board/up_boot.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -550,11 +550,11 @@ static int tc_sample(FAR struct tc_dev_s *priv,
priv->id++;
}
else if (sample->contact == CONTACT_DOWN)
{
{
/* First report -- next report will be a movement */
priv->sample.contact = CONTACT_MOVE;
}
priv->sample.contact = CONTACT_MOVE;
}
priv->penchange = false;
ret = OK;
@ -1206,9 +1206,9 @@ static int tc_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
ivdbg("cmd: %d arg: %ld\n", cmd, arg);
return -ENOTTY; /* None yet supported */
#else
FAR struct inode *inode;
FAR struct inode *inode;
FAR struct tc_dev_s *priv;
int ret;
int ret;
ivdbg("cmd: %d arg: %ld\n", cmd, arg);
DEBUGASSERT(filep);

5
configs/mikroe-stm32f4/src/up_usb.c
View File

@ -2,7 +2,7 @@
* configs/mikroe_stm32f4/src/up_usbdev.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -289,6 +289,3 @@ void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
#endif
#endif /* CONFIG_STM32_OTGFS */

2
configs/mikroe-stm32f4/src/up_watchdog.c
View File

@ -2,7 +2,7 @@
* configs/mikroe_stm32f4/src/up_watchdog.c
* arch/arm/src/board/up_watchdog.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without

2
configs/mikroe-stm32f4/usbnsh/defconfig
View File

@ -16,7 +16,7 @@ CONFIG_HOST_LINUX=y
#
# Build Configuration
#
CONFIG_APPS_DIR="../apps"
# CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#

0
configs/mikroe-stm32f4/usbnsh/setenv.sh Normal file → Executable file
View File