Move EMAC definitions to a separate file
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1442 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
deb8c9971b
commit
c931733eec
@ -41,10 +41,21 @@
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include "ez80f91_emac.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Memory map ***********************************************************************/
|
||||
|
||||
#define EZ80_ONCHIPFLASH 0x000000 /* CS0: 256Kb of on-chip flash */
|
||||
#define EZ80_OFFCHIPCS0 0x400000 /* CS0: Off chip use (usually flash) */
|
||||
#define EZ80_OFFCHIPCS2 0x800000 /* CS2: Off chip use (e.g. memory mapped I/O) */
|
||||
#define EZ80_OFFCHIPCS1 0xc00000 /* CS1: Off chip use (usually SRAM) */
|
||||
#define EZ80_EMACSRAM 0xffc000 /* On-chip EMAC SRAM (8Kb) */
|
||||
#define EZ80_ONCHIPSRAM 0xffe000 /* On-chip SRAM (8Kb) */
|
||||
|
||||
/* Product ID Registers ************************************************************/
|
||||
|
||||
#define EZ80_ZDI_ID_L 0x00
|
||||
@ -96,8 +107,8 @@
|
||||
#define EZ80_EMAC_FIAD 0x3f /* PHY unit select register */
|
||||
#define EZ80_EMAC_PTMR 0x40 /* EMAC transmit polling timer register */
|
||||
#define EZ80_EMAC_RST 0x41 /* EMAC reset control register */
|
||||
#define EZ80_EMAC_TLBP_L 0x42 /* EMAC tranmit lower boundary pointer (low) */
|
||||
#define EZ80_EMAC_TLBP_H 0x43 /* EMAC tranmit lower boundary pointer (high) */
|
||||
#define EZ80_EMAC_TLBP_L 0x42 /* EMAC transmit lower boundary pointer (low) */
|
||||
#define EZ80_EMAC_TLBP_H 0x43 /* EMAC transmit lower boundary pointer (high) */
|
||||
#define EZ80_EMAC_BP_L 0x44 /* EMAC boundary pointer register (low) */
|
||||
#define EZ80_EMAC_BP_H 0x45 /* EMAC boundary pointer register (high) */
|
||||
#define EZ80_EMAC_BP_U 0x46 /* EMAC boundary pointer register (upper byte) */
|
||||
@ -118,39 +129,9 @@
|
||||
#define EZ80_EMAC_BLKSLFT_L 0x55 /* EMAC receive blocks left register (low) */
|
||||
#define EZ80_EMAC_BLKSLFT_H 0x56 /* EMAC receive blocks left register (high) */
|
||||
#define EZ80_EMAC_FDATA_L 0x57 /* EMAC FIFO data register (low) */
|
||||
#define EZ80_EMAC_FDATA_H 0x58 /* EMAC FIFO data register (low) */
|
||||
#define EZ80_EMAC_FDATA_H 0x58 /* EMAC FIFO data register (high) */
|
||||
#define EZ80_EMAC_FFLAGS 0x59 /* EMAC FIFO flags register */
|
||||
|
||||
/* EMAC configuration 1/2/3 registers ***********************************************/
|
||||
|
||||
#define EMAC_CFG1_DCRCC 0x01 /* Bit 0: 1=4 bytes of proprietary header */
|
||||
#define EMAC_CFG1_HUGEN 0x02 /* Bit 1: 1=Allow unlimited size frames to be recieved */
|
||||
#define EMAC_CFG1_FLCHK 0x04 /* Bit 2: 1=Frame lengths compared to length/type */
|
||||
#define EMAC_CFG1_FULLHD 0x08 /* Bit 3: 1=Enable full duplex mode */
|
||||
#define EMAC_CFG1_CRCEN 0x10 /* Bit 4: 1=Append CRC to every frame */
|
||||
#define EMAC_CFG1_VLPAD 0x20 /* Bit 5: 1=Pad all short frames to 64 bytes, append CRC */
|
||||
#define EMAC_CFG1_ADPADN 0x40 /* Bit 6: 1=Enable frame detection by check VALN protocol ID */
|
||||
#define EMAC_CFG1_PADEN 0x80 /* Bit 7: 1=Padd all short frames with zeros. */
|
||||
|
||||
#define EMAC_CFG2_LCOLMASK 0x3f /* Bits 0-5: Number bytes after start frame for collision */
|
||||
#define EMAC_CFG2_NOBO 0x40 /* Bit 6: 1=immediate transmit after collision */
|
||||
#define EMAC_CFG2_BPNB 0x80 /* Bit 7: 1=after collision retransmit without back-off */
|
||||
|
||||
#define EMAC_CFG3_RETRYMASK 0x0f /* Bits 0-3: Number retransmissions before abort */
|
||||
#define EMAC_CFG3_BITMD 0x10 /* Bit 4: 1=Enable 10Mbps ENDEC mode */
|
||||
#define EMAC_CFG3_XSDFR 0x20 /* Bit 5: 1=Defer to carrier indefinitely */
|
||||
#define EMAC_CFG3_PUREP 0x40 /* Bit 6: 1=Verify preamble */
|
||||
#define EMAC_CFG3_LONGP 0x80 /* Bit 7: 1=only allow preamble < 12 bytes */
|
||||
|
||||
#define EMAC_CFG4_RXEN 0x01 /* Bit 0: 1=Receive frames */
|
||||
#define EMAC_CFG4_TPAUSE 0x02 /* Bit 1: 1=Force pause condition */
|
||||
#define EMAC_CFG4_TXFC 0x04 /* Bit 2: 1=Transmit pause control frames */
|
||||
#define EMAC_CFG4_RXFC 0x08 /* Bit 3: 1=Act on receive pause control frames */
|
||||
#define EMAC_CFG4_PARF 0x10 /* Bit 4: 1=Receive all frames */
|
||||
#define EMAC_CFG4_THDF 0x20 /* Bit 5: 1=Asser back-pressure */
|
||||
#define EMAC_CFG4_TPCF 0x40 /* Bit 6: 1=Transmit pause control frame. */
|
||||
/* Bit 7: reserved */
|
||||
|
||||
/* PLL Registers *******************************************************************/
|
||||
|
||||
#define EZ80_PLL_DIV_L 0x5c
|
||||
|
||||
277
arch/z80/src/ez80/ez80f91_emac.h
Normal file
277
arch/z80/src/ez80/ez80f91_emac.h
Normal file
@ -0,0 +1,277 @@
|
||||
/************************************************************************************
|
||||
* arch/z80/src/ez80/ez80f91_emac.h
|
||||
* arch/z80/src/chip/ez80f91_emac.h
|
||||
*
|
||||
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_Z80_SRC_EZ80_EZ80F91_EMAC_H
|
||||
#define __ARCH_Z80_SRC_EZ80_EZ80F91_EMAC_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* EMACC Registers *****************************************************************/
|
||||
|
||||
/* Provided in ez80f91.h */
|
||||
|
||||
/* EMAC configuration 1/2/3 register bit settings ***********************************/
|
||||
|
||||
#define EMAC_CFG1_DCRCC 0x01 /* Bit 0: 1=4 bytes of proprietary header */
|
||||
#define EMAC_CFG1_HUGEN 0x02 /* Bit 1: 1=Allow unlimited size frames to be recieved */
|
||||
#define EMAC_CFG1_FLCHK 0x04 /* Bit 2: 1=Frame lengths compared to length/type */
|
||||
#define EMAC_CFG1_FULLHD 0x08 /* Bit 3: 1=Enable full duplex mode */
|
||||
#define EMAC_CFG1_CRCEN 0x10 /* Bit 4: 1=Append CRC to every frame */
|
||||
#define EMAC_CFG1_VLPAD 0x20 /* Bit 5: 1=Pad all short frames to 64 bytes, append CRC */
|
||||
#define EMAC_CFG1_ADPADN 0x40 /* Bit 6: 1=Enable frame detection by check VALN protocol ID */
|
||||
#define EMAC_CFG1_PADEN 0x80 /* Bit 7: 1=Pad all short frames with zeros. */
|
||||
|
||||
#define EMAC_CFG2_LCOLMASK 0x3f /* Bits 0-5: Number bytes after start frame for collision */
|
||||
#define EMAC_CFG2_NOBO 0x40 /* Bit 6: 1=immediate transmit after collision */
|
||||
#define EMAC_CFG2_BPNB 0x80 /* Bit 7: 1=after collision retransmit without back-off */
|
||||
|
||||
#define EMAC_CFG3_RETRYMASK 0x0f /* Bits 0-3: Number retransmissions before abort */
|
||||
#define EMAC_CFG3_BITMD 0x10 /* Bit 4: 1=Enable 10Mbps ENDEC mode */
|
||||
#define EMAC_CFG3_XSDFR 0x20 /* Bit 5: 1=Defer to carrier indefinitely */
|
||||
#define EMAC_CFG3_PUREP 0x40 /* Bit 6: 1=Verify preamble */
|
||||
#define EMAC_CFG3_LONGP 0x80 /* Bit 7: 1=only allow preamble < 12 bytes */
|
||||
|
||||
#define EMAC_CFG4_RXEN 0x01 /* Bit 0: 1=Receive frames */
|
||||
#define EMAC_CFG4_TPAUSE 0x02 /* Bit 1: 1=Force pause condition */
|
||||
#define EMAC_CFG4_TXFC 0x04 /* Bit 2: 1=Transmit pause control frames */
|
||||
#define EMAC_CFG4_RXFC 0x08 /* Bit 3: 1=Act on receive pause control frames */
|
||||
#define EMAC_CFG4_PARF 0x10 /* Bit 4: 1=Receive all frames */
|
||||
#define EMAC_CFG4_THDF 0x20 /* Bit 5: 1=Asser back-pressure */
|
||||
#define EMAC_CFG4_TPCF 0x40 /* Bit 6: 1=Transmit pause control frame. */
|
||||
/* Bit 7: reserved */
|
||||
|
||||
/* EMAC AFR register bit settings ***************************************************/
|
||||
|
||||
#define EMAC_AFR_BC 0x01 /* Bit 0: 1=Accept broadcast messages */
|
||||
#define EMAC_AFR_QMC 0x02 /* Bit 1: 1=Accept only qualified multicast messages */
|
||||
#define EMAC_AFR_MC 0x04 /* Bit 2: 1=Accept any multicast message */
|
||||
#define EMAC_AFR_PROM 0x08 /* Bit 3: 1=Enable promiscuous mode */
|
||||
/* Bits 4-7: Reserved */
|
||||
|
||||
/* EMAC MII management register bit settings ****************************************/
|
||||
|
||||
#define EMAC_MIIMGMT_CLKMASK 0x07 /* Bits 0-2: Divisor that produces MDC from SCLK */
|
||||
#define EMAC_MIIMGMT_SPRE 0x08 /* Bit 3: 1=Suppress MDO preamble */
|
||||
#define EMAC_MIIMGMT_SCAN 0x10 /* Bit 4: 1=Perform continus read cycles */
|
||||
#define EMAC_MIIMGMT_SCINC 0x20 /* Bit 5: 1=Increment PHY address on scan cycle */
|
||||
#define EMAC_MIIMGMT_RSTAT 0x40 /* Bit 6: 1=Read status from PHY (via PRSD) */
|
||||
#define EMAC_MIIMGMT_LCTLD 0x80 /* Bit 7: 1=Send CTLD control data to PHY */
|
||||
|
||||
/* EMAC PHY unit select address register bit settings *******************************/
|
||||
|
||||
#define EMAC_RGAD_MASK 0x1f /* 5-bit value selects address within PHY */
|
||||
|
||||
/* EMAC PHY address register bit settings *******************************************/
|
||||
|
||||
#define EMAC_FIAD_MASK 0x1f /* 5-bit value selects the external PHY */
|
||||
|
||||
/* EMAC reset control register bit settings *****************************************/
|
||||
|
||||
#define EMAC_RST_HRMGT 0x01 /* Bit 0: 1=Reset EMAC management function */
|
||||
#define EMAC_RST_HRRMC 0x02 /* Bit 1: 1=Reset EMAC receive control function */
|
||||
#define EMAC_RST_HRTMC 0x04 /* Bit 2: 1=Reset EMAC transmit control function */
|
||||
#define EMAC_RST_HRRFN 0x08 /* Bit 3: 1=Reset receive function */
|
||||
#define EMAC_RST_HRTFN 0x10 /* Bit 4: 1=Reset transmit function */
|
||||
#define EMAC_RST_SRST 0x20 /* Bit 5: 1=Software reset active */
|
||||
/* Bits 6-7: Reserved */
|
||||
|
||||
/* EMAC bufsize register bit settings ***********************************************/
|
||||
|
||||
#define EMAC_BUFSIZ_BUFSZMASK 0xc0 /* Bits 6-6: Rx/Tx buffer size */
|
||||
# define EMAC_BUFSIZ_256b 0x00 /* EMAC Rx/Tx buffer size = 256 bytes */
|
||||
# define EMAC_BUFSIZ_128b 0x40 /* EMAC Rx/Tx buffer size = 128 bytes */
|
||||
# define EMAC_BUFSIZ_64b 0x80 /* EMAC Rx/Tx buffer size = 64 bytes */
|
||||
# define EMAC_BUFSIZ_32b 0xc0 /* EMAC Rx/Tx buffer size = 32 bytes */
|
||||
#define EMAC_BUFSIZ_TPCFLMASK 0x3f /* Bits 0-5: Tranmsit pause frame level */
|
||||
|
||||
/* EMAC interrupt enable register bit settings **************************************/
|
||||
|
||||
#define EMAC_EIN_TXDONE 0x01 /* Bit 0: 1=Enable transmit done interrupt */
|
||||
#define EMAC_EIN_TXCF 0x02 /* Bit 1: 1=Enable transmit control frame interrupt */
|
||||
#define EMAC_EIN_RXOVR 0x04 /* Bit 2: 1=Enable receive overrun interrupt */
|
||||
#define EMAC_EIN_RXDONE 0x08 /* Bit 3: 1=Enable receive done interrupt */
|
||||
#define EMAC_EIN_RXPCF 0x10 /* Bit 4: 1=Enable receive pause control frame interrupt */
|
||||
#define EMAC_EIN_RXCF 0x20 /* Bit 5: 1=Enable receive control frame interrupt */
|
||||
#define EMAC_EIN_MGTDONE 0x40 /* Bit 6: 1=Enable MII Mgmt done interrupt */
|
||||
#define EMAC_EIN_TXFSMERR 0x80 /* Bit 7: 1=Enable transmit state machine error interrupt */
|
||||
|
||||
/* EMAC interrupt status register bit settings **************************************/
|
||||
|
||||
#define EMAC_ISTAT_TXDONE 0x01 /* Bit 0: 1=Transmit done interrupt */
|
||||
#define EMAC_ISTAT_TXCF 0x02 /* Bit 1: 1=Transmit control frame interrupt */
|
||||
#define EMAC_ISTAT_RXOVR 0x04 /* Bit 2: 1=Receive overrun interrupt */
|
||||
#define EMAC_ISTAT_RXDONE 0x08 /* Bit 3: 1=Receive done interrupt */
|
||||
#define EMAC_ISTAT_RXPCF 0x10 /* Bit 4: 1=Receive pause control frame interrupt */
|
||||
#define EMAC_ISTAT_RXCF 0x20 /* Bit 5: 1=Receive control frame interrupt */
|
||||
#define EMAC_ISTAT_MGTDONE 0x40 /* Bit 6: 1=MII Mgmt done interrupt */
|
||||
#define EMAC_ISTAT_TXFSMERR 0x80 /* Bit 7: 1=Transmit state machine error interrupt */
|
||||
|
||||
/* EMAC MII status register bit settings ********************************************/
|
||||
|
||||
#define EMAC_MIISTAT_RDADRMK 0x1f /* Bits 0-4: PHY addressed in current scan cyle */
|
||||
#define EMAC_MIISTAT_NVALID 0x20 /* Bit 5: 1=PRSD is valid */
|
||||
#define EMAC_MIISTAT_MIILF 0x40 /* Bit 6: 1=PHY link OK */
|
||||
#define EMAC_MIISTAT_BUSY 0x80 /* Bit 7: 1=MII management in progress */
|
||||
|
||||
/* EMAC FIFO flags register bit settings ********************************************/
|
||||
|
||||
#define EMAC_FFLAGS_RFE 0x01 /* Bit 0: 1=Receive FIFO empty */
|
||||
#define EMAC_FFLAGS_RFAE 0x02 /* Bit 0: 1=Receive FIFO almost empty */
|
||||
#define EMAC_FFLAGS_RFAF 0x04 /* Bit 0: 1=Receive FIFO almost full */
|
||||
#define EMAC_FFLAGS_RFF 0x08 /* Bit 0: 1=Receive FIFO full */
|
||||
#define EMAC_FFLAGS_TFE 0x10 /* Bit 0: 1=Transmit FIFO empty */
|
||||
#define EMAC_FFLAGS_TFAE 0x20 /* Bit 0: 1=Transmit FIFO almost empty */
|
||||
#define EMAC_FFLAGS_TFF 0x80 /* Bit 0: 1=Trasnmit FIFO full */
|
||||
|
||||
/* EMAC Transmit Descriptor Status **************************************************/
|
||||
|
||||
#define EMAC_TXDESC_NCOLL 0x0001 /* Bits 0-3: Bumber of collisions that occurred
|
||||
* while transmitting the packet. */
|
||||
#define EMAC_TXDESC_MXCOLL 0x0010 /* Bit 4: 1=maximum number of collisions.
|
||||
* number > CFG3[3:0]. packet aborted */
|
||||
#define EMAC_TXDESC_LATECOLL 0x0020 /* Bit 5: 1=late collision. Collision is detected
|
||||
* at a byte count > CFG2[5:0]. Collisions detected
|
||||
* before the byte count reaches CFG2[5:0] are early
|
||||
* collisions and retried. */
|
||||
#define EMAC_TXDESC_FIFOUNDR 0x0040 /* Bit 6: TxFIFO Underrun. Check the TxAbort
|
||||
* bit to see if the packet is aborted or retried. */
|
||||
#define EMAC_TXDESC_XSDFR 0x0080 /* Bit 7: Packet is excessively deferred. (> 6071 nibble
|
||||
* times in 100 BaseT or 24,287 bit times in 10 BaseT). */
|
||||
#define EMAC_TXDESC_PKTDEFFRD 0x0100 /* Bit 8: Packet is deferred */
|
||||
#define EMAC_TXDESC_CRCERROR 0x0200 /* Bit 9: Invalid FCS (CRC). Set CRCEN = 0 and the
|
||||
* last 4 bytes of the packet are not the valid FCS. */
|
||||
#define EMAC_TXDESC_LCERROR 0x0400 /* Bit 10: Type/Length field is not a Type field and
|
||||
* does not match the actual data byte length of
|
||||
* the Ethernet packet. The data byte length is
|
||||
* the number of bytes of data in the Ethernet
|
||||
* packet between the Type/Length field and the FCS. */
|
||||
#define EMAC_TXDESC_LOOR 0x0800 /* Bit 11: Type/Length field is out of range (larger
|
||||
* than 1518 bytes). */
|
||||
#define EMAC_TXDESC_HUGE 0x1000 /* Bit 12: 1=Packet size is very large(Pkt_Size > MAXF). */
|
||||
#define EMAC_TXDESC_BPA 0x2000 /* Bit 13: 1=Back pressure applied */
|
||||
#define EMAC_TXDESC_ABORT 0x4000 /* Bit 14: 1=Packet aborted (not transmitted). */
|
||||
#define EMAC_TXDESC_OWNER 0x8000 /* Bit 15: 0=Host (eZ80®) owns, 1=EMAC owns. */
|
||||
|
||||
/* Receive Descriptor Status ********************************************************/
|
||||
|
||||
#define EMAC_RXDESC_OVR 0x0001 /* Bit 0: 1=A Receive Overrun occurs in this packet. An
|
||||
* overrun occurs when all of the EMAC Receive
|
||||
* buffers are in use and the Receive FIFO is full.
|
||||
* The hardware ignores all incoming packets until the
|
||||
* ISTAT Register [RXOVR] bit is cleared by the software.
|
||||
* There is no indication as to how many packets are
|
||||
* ignored. */
|
||||
#define EMAC_RXDESC_DVEVENT 0x0002 /* Bit 1: 1=Receive data (RxDV) event is previously seen.
|
||||
* Indicates that the last Receive event is not long
|
||||
* enough to be a valid packet. */
|
||||
#define EMAC_RXDESC_CEVENT 0x0004 /* Bit 2: 1=Carrier event is previously seen. This event is
|
||||
* defined as Rx error RxER = 1, receive data valid
|
||||
* (RxDV) = 0 and receive data (RxD) = Eh */
|
||||
#define EMAC_RXDESC_CODEV 0x0008 /* Bit 3: 1=A code violation is detected. The PHY asserts
|
||||
* Rx error (RxER). */
|
||||
#define EMAC_RXDESC_LCERROR 0x0010 /* Bit 4 1=Type/Length field is not a Type field and it does
|
||||
* not match the actual data byte length of the
|
||||
* Ethernet packet. The data byte length is the
|
||||
* number of bytes of data in the Ethernet packet
|
||||
* between the Type/Length field and the FCS. */
|
||||
#define EMAC_RXDESC_LOOR 0x0020 /* Bit 5: 1=Type/Length field is out of range (larger
|
||||
* than 1518 bytes). */
|
||||
#define EMAC_RXDESC_UOPCODE 0x0040 /* Bit 6: 1=Unsupported Op Code is indicated in the Op
|
||||
* Code field of the Ethernet packet. */
|
||||
#define EMAC_RXDESC_VLAN 0x0080 /* Bit 7: 1=The packet is a VLAN packet */
|
||||
#define EMAC_RXDESC_BCPKT 0x0100 /* Bit 8: 1=packet contains a broadcast address.
|
||||
#define EMAC_RXDESC_MCPKT 0x0200 /* Bit 9: 1=The packet contains a multicast address */
|
||||
#define EMAC_RXDESC_CR 0x0400 /* Bit 10: 1=The packet is a control frame */
|
||||
#define EMAC_RXDESC_PCF 0x0800 /* Bit 11: 1=The packet is a pause control frame */
|
||||
#define EMAC_RXDESC_LONGEVNT 0x1000 /* Bit 12: 1= A Long or Dropped Event occurs. A Long Event is
|
||||
* when a packet over 50,000 bit times occurs. A
|
||||
* Dropped Packet can occur if the minimum interpacket
|
||||
* gap is not met, the preamble is not pure, and
|
||||
* the CFG3[PUREP] bit is set, or if a preamble over
|
||||
* 11 bytes in length is detected and the CFG3[LONGP]
|
||||
* bit is set to 1. */
|
||||
#define EMAC_RXDESC_CRCERR 0x2000 /* Bit 13: 1=The CRC (FCS) is in error */
|
||||
#define EMAC_RXDESC_ALGNERR 0x4000 /* Bit 14: 1=An odd number of nibbles is received. */
|
||||
#define EMAC_RXDESC_OK 0x8000 /* Bit 15: 1=Packet received intact. */
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
||||
/* EMAC descriptor structure (7 bytes) */
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
struct emac_desc_s
|
||||
{
|
||||
uint24 np; /* Pointer to the start of the next packet */
|
||||
uint16 pktsize; /* Number of bytes in the packet, including the 4 CRC
|
||||
* bytes, but excluding the 7 descriptor table bytes. */
|
||||
uint16 stat; /* Status of the packet. Differs for TX and RX packets
|
||||
* (see EMAC_RX/TXDESC_* definitions) */
|
||||
};
|
||||
#endif
|
||||
|
||||
#define SIZEOF_EMACSDESC 7
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
#ifdef __cplusplus
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
#undef EXTERN
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif /* __cplusplus */
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
#endif /* __ARCH_Z80_SRC_EZ80_EZ80F91_EMAC_H */
|
||||
Loading…
Reference in New Issue
Block a user