Build/test framework for the Zmodem sz and rz commands which are on their way
This commit is contained in:
Gregory Nutt
parent
6505474f03
commit
c960273afd
@ -5129,3 +5129,6 @@
|
||||
* include/nuttx/usb/usbdev.h: Fix some typos that cause compiler errors
|
||||
when CONFIG_USBDEV_DMA and CONFIG_USBDEV_DMAMEMORY are selected (From
|
||||
Chia Cheng Tsao, 2013-7-12).
|
||||
* nuttx/configs/olimex-lpc1766stk/zmodem: Add a new configuration to
|
||||
test the Zmodem sz and rz commands (which don't actually exist yet,
|
||||
but will). (2013-7-12).
|
||||
|
||||
@ -14,6 +14,7 @@ Contents
|
||||
NuttX OABI "buildroot" Toolchain
|
||||
NXFLAT Toolchain
|
||||
LEDs
|
||||
Serial Console
|
||||
Using OpenOCD and GDB with an FT2232 JTAG emulator
|
||||
Olimex LPC1766-STK Configuration Options
|
||||
USB Host Configuration
|
||||
@ -449,6 +450,23 @@ LEDs
|
||||
processing. That, of course, makes sense if the system is truly idle and only
|
||||
processing timer interrupts.
|
||||
|
||||
Serial Console
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
By default, all of these configurations use UART0 for the NuttX serial
|
||||
console. UART0 corresponds to the DB-9 connector labelled "RS232_0". This
|
||||
is a female connector and will require a normal male-to-female RS232 cable
|
||||
to connect to a PC.
|
||||
|
||||
An alternate is UART1 which connects to the other DB-9 connector labeled
|
||||
"RS232_1". UART1 is not enabled by default unless specifically noted
|
||||
otherwise in the configuration description. A normal serial cable must be
|
||||
used with the port as well.
|
||||
|
||||
By default serial console is configured for 57600 baud, 8-bit, 1 stop bit,
|
||||
and no parity. Higher rates will probably require minor modification of
|
||||
the UART initialization logic to use the fractional dividers.
|
||||
|
||||
Using OpenOCD and GDB with an FT2232 JTAG emulator
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
@ -1043,3 +1061,51 @@ Where <subdir> is one of the following:
|
||||
class driver at apps/examples/usbstorage. See apps/examples/README.txt
|
||||
for more information.
|
||||
|
||||
zmodem:
|
||||
This is an alternative NSH configuration that was used to test Zmodem
|
||||
file transfers. It is similar to the standard NSH configuration but has
|
||||
the following differences:
|
||||
|
||||
1. UART0 is still the NuttX serial console as with most of the other
|
||||
configurations here. However, UART1 is also enabled for performing
|
||||
the Zmodem transfers. Zmodem transfers can be performed on the
|
||||
console device, however, this configuration permits debug output on
|
||||
the serial console which the transfer is in progress without
|
||||
interfering with the file transfer.
|
||||
|
||||
CONFIG_LPC17XX_UART1=y
|
||||
CONFIG_UART1_ISUART=y
|
||||
CONFIG_UART1_RXBUFSIZE=256
|
||||
CONFIG_UART1_TXBUFSIZE=256
|
||||
CONFIG_UART1_BAUD=115200
|
||||
CONFIG_UART1_BITS=8
|
||||
CONFIG_UART1_PARITY=0
|
||||
CONFIG_UART1_2STOP=0
|
||||
|
||||
2. Support is included for the NuttX sz and rz commands.
|
||||
|
||||
This program has been verified against the rzsz programs running on a
|
||||
Linux PC. To send a file to the PC, first start rz on the Linux host:
|
||||
|
||||
$ sudo rz </dev/ttyS0 >/dev/ttyS0
|
||||
|
||||
You can add the rz -v option multiple times, each increases the level
|
||||
of debug output.
|
||||
|
||||
NOTE: The NuttX Zmodem does sends rz\n when it starts in compliance with
|
||||
the Zmodem specification. On Linux this, however, seems to start some
|
||||
other, incompatible version of rz. You need to start rz manually to
|
||||
make sure that the correct version is selected. You can tell when this
|
||||
evil rz/sz has inserted itself because you will see the '^' (0x5e)
|
||||
character replacing the standard Zmodem ZDLE character (0x19) in the
|
||||
binary data stream.
|
||||
|
||||
If you don't have the rz command on your Linux box, the package to
|
||||
install rzsz (or possibily lrzsz).
|
||||
|
||||
Then on the target:
|
||||
|
||||
> sz -d /dev/ttyS1 <filename>
|
||||
|
||||
Where filename is a file residing in the /tmp directory.
|
||||
|
||||
90
configs/olimex-lpc1766stk/nsh/defconfig
Executable file → Normal file
90
configs/olimex-lpc1766stk/nsh/defconfig
Executable file → Normal file
@ -65,13 +65,15 @@ CONFIG_ARCH="arm"
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
CONFIG_ARCH_CHIP_LPC17XX=y
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3U is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM3=y
|
||||
@ -80,10 +82,9 @@ CONFIG_ARCH_CHIP="lpc17xx"
|
||||
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||
CONFIG_ARCH_HAVE_CMNVECTOR=y
|
||||
# CONFIG_ARMV7M_CMNVECTOR is not set
|
||||
# CONFIG_ARCH_HAVE_FPU is not set
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
# CONFIG_ARMV7M_MPU is not set
|
||||
CONFIG_BOARD_LOOPSPERMSEC=8111
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
@ -93,6 +94,7 @@ CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
|
||||
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
|
||||
# CONFIG_GPIO_IRQ is not set
|
||||
|
||||
#
|
||||
# LPC17xx Configuration Options
|
||||
@ -133,6 +135,7 @@ CONFIG_LPC17_UART0=y
|
||||
# CONFIG_LPC17_UART1 is not set
|
||||
# CONFIG_LPC17_UART2 is not set
|
||||
# CONFIG_LPC17_UART3 is not set
|
||||
# CONFIG_LPC17_UART4 is not set
|
||||
# CONFIG_LPC17_CAN1 is not set
|
||||
# CONFIG_LPC17_CAN2 is not set
|
||||
# CONFIG_LPC17_SPI is not set
|
||||
@ -161,20 +164,6 @@ CONFIG_LPC17_SSP1=y
|
||||
# Serial driver options
|
||||
#
|
||||
# CONFIG_SERIAL_TERMIOS is not set
|
||||
# CONFIG_UART0_FLOWCONTROL is not set
|
||||
|
||||
#
|
||||
# ADC driver options
|
||||
#
|
||||
|
||||
#
|
||||
# CAN driver options
|
||||
#
|
||||
# CONFIG_GPIO_IRQ is not set
|
||||
|
||||
#
|
||||
# I2C driver options
|
||||
#
|
||||
|
||||
#
|
||||
# Ethernet driver options
|
||||
@ -188,14 +177,6 @@ CONFIG_NET_PRIORITY=0
|
||||
# CONFIG_NET_HASH is not set
|
||||
# CONFIG_NET_MULTICAST is not set
|
||||
|
||||
#
|
||||
# USB device driver options
|
||||
#
|
||||
|
||||
#
|
||||
# USB host driver options
|
||||
#
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
@ -213,10 +194,14 @@ CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=8111
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_DRAM_START=0x10000000
|
||||
CONFIG_DRAM_SIZE=32768
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
@ -257,6 +242,7 @@ CONFIG_NSH_MMCSDSPIPORTNO=1
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
@ -272,7 +258,6 @@ CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
@ -332,9 +317,11 @@ CONFIG_SPI=y
|
||||
# CONFIG_SPI_OWNBUS is not set
|
||||
# CONFIG_SPI_EXCHANGE is not set
|
||||
# CONFIG_SPI_CMDDATA is not set
|
||||
# CONFIG_SPI_BITBANG is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
@ -346,6 +333,7 @@ CONFIG_MMCSD_NSLOTS=1
|
||||
# CONFIG_MMCSD_HAVECARDDETECT is not set
|
||||
CONFIG_MMCSD_SPI=y
|
||||
CONFIG_MMCSD_SPICLOCK=12500000
|
||||
CONFIG_MMCSD_SPIMODE=0
|
||||
# CONFIG_MMCSD_SDIO is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_NETDEVICES is not set
|
||||
@ -354,7 +342,6 @@ CONFIG_MMCSD_SPICLOCK=12500000
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
# CONFIG_16550_UART is not set
|
||||
@ -373,6 +360,10 @@ CONFIG_UART0_BAUD=57600
|
||||
CONFIG_UART0_BITS=8
|
||||
CONFIG_UART0_PARITY=0
|
||||
CONFIG_UART0_2STOP=0
|
||||
# CONFIG_UART0_IFLOWCONTROL is not set
|
||||
# CONFIG_UART0_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
@ -397,6 +388,7 @@ CONFIG_PHY_KS8721=y
|
||||
# CONFIG_PHY_DM9161 is not set
|
||||
# CONFIG_NET_NOINTS is not set
|
||||
# CONFIG_NET_MULTIBUFFER is not set
|
||||
# CONFIG_NET_PROMISCUOUS is not set
|
||||
# CONFIG_NET_IPv6 is not set
|
||||
CONFIG_NSOCKET_DESCRIPTORS=8
|
||||
CONFIG_NET_NACTIVESOCKETS=16
|
||||
@ -451,6 +443,7 @@ CONFIG_FAT_MAXFNAME=32
|
||||
# CONFIG_NFS is not set
|
||||
# CONFIG_FS_NXFFS is not set
|
||||
# CONFIG_FS_ROMFS is not set
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
# CONFIG_FS_BINFS is not set
|
||||
|
||||
#
|
||||
@ -467,10 +460,16 @@ CONFIG_FAT_MAXFNAME=32
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
@ -496,6 +495,7 @@ CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
@ -511,9 +511,11 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Helper Functions
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
@ -535,7 +537,6 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CDCACM is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
@ -549,9 +550,10 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NETTEST is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
@ -571,6 +573,10 @@ CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
@ -584,8 +590,9 @@ CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
@ -621,11 +628,7 @@ CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
|
||||
# CONFIG_NETUTILS_XMLRPC is not set
|
||||
|
||||
#
|
||||
# ModBus
|
||||
#
|
||||
|
||||
#
|
||||
# FreeModbus
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
@ -677,9 +680,15 @@ CONFIG_NSH_BUILTIN_APPS=y
|
||||
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_WGET is not set
|
||||
# CONFIG_NSH_DISABLE_XD is not set
|
||||
|
||||
#
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
@ -726,6 +735,15 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
|
||||
#
|
||||
# RAM test
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
|
||||
109
configs/olimex-lpc1766stk/zmodem/Make.defs
Normal file
109
configs/olimex-lpc1766stk/zmodem/Make.defs
Normal file
@ -0,0 +1,109 @@
|
||||
############################################################################
|
||||
# configs/olimex-lpc1766stk/zmodem/Make.defs
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
807
configs/olimex-lpc1766stk/zmodem/defconfig
Normal file
807
configs/olimex-lpc1766stk/zmodem/defconfig
Normal file
@ -0,0 +1,807 @@
|
||||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
CONFIG_HOST_LINUX=y
|
||||
# CONFIG_HOST_OSX is not set
|
||||
# CONFIG_HOST_WINDOWS is not set
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
# CONFIG_RAW_BINARY is not set
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
CONFIG_ARCH_CHIP_LPC17XX=y
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM3=y
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="lpc17xx"
|
||||
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||
CONFIG_ARCH_HAVE_CMNVECTOR=y
|
||||
# CONFIG_ARMV7M_CMNVECTOR is not set
|
||||
# CONFIG_ARCH_HAVE_FPU is not set
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
# CONFIG_ARMV7M_MPU is not set
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
|
||||
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
|
||||
# CONFIG_GPIO_IRQ is not set
|
||||
|
||||
#
|
||||
# LPC17xx Configuration Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_LPC1751 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1752 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1754 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1756 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1758 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1759 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1764 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1765 is not set
|
||||
CONFIG_ARCH_CHIP_LPC1766=y
|
||||
# CONFIG_ARCH_CHIP_LPC1767 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1768 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1769 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1773 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1774 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1776 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1777 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1778 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1785 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1786 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1787 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1788 is not set
|
||||
CONFIG_ARCH_FAMILY_LPC176X=y
|
||||
|
||||
#
|
||||
# LPC17xx Peripheral Support
|
||||
#
|
||||
CONFIG_LPC17_MAINOSC=y
|
||||
CONFIG_LPC17_PLL0=y
|
||||
CONFIG_LPC17_PLL1=y
|
||||
CONFIG_LPC17_ETHERNET=y
|
||||
# CONFIG_LPC17_USBHOST is not set
|
||||
# CONFIG_LPC17_USBDEV is not set
|
||||
CONFIG_LPC17_UART0=y
|
||||
CONFIG_LPC17_UART1=y
|
||||
# CONFIG_LPC17_UART2 is not set
|
||||
# CONFIG_LPC17_UART3 is not set
|
||||
# CONFIG_LPC17_UART4 is not set
|
||||
# CONFIG_LPC17_CAN1 is not set
|
||||
# CONFIG_LPC17_CAN2 is not set
|
||||
# CONFIG_LPC17_SPI is not set
|
||||
# CONFIG_LPC17_SSP0 is not set
|
||||
CONFIG_LPC17_SSP1=y
|
||||
# CONFIG_LPC17_I2C0 is not set
|
||||
# CONFIG_LPC17_I2C1 is not set
|
||||
# CONFIG_LPC17_I2C2 is not set
|
||||
# CONFIG_LPC17_I2S is not set
|
||||
# CONFIG_LPC17_TMR0 is not set
|
||||
# CONFIG_LPC17_TMR1 is not set
|
||||
# CONFIG_LPC17_TMR2 is not set
|
||||
# CONFIG_LPC17_TMR3 is not set
|
||||
# CONFIG_LPC17_RIT is not set
|
||||
# CONFIG_LPC17_PWM0 is not set
|
||||
# CONFIG_LPC17_MCPWM is not set
|
||||
# CONFIG_LPC17_QEI is not set
|
||||
# CONFIG_LPC17_RTC is not set
|
||||
# CONFIG_LPC17_WDT is not set
|
||||
# CONFIG_LPC17_ADC is not set
|
||||
# CONFIG_LPC17_DAC is not set
|
||||
# CONFIG_LPC17_GPDMA is not set
|
||||
# CONFIG_LPC17_FLASH is not set
|
||||
|
||||
#
|
||||
# Serial driver options
|
||||
#
|
||||
# CONFIG_SERIAL_TERMIOS is not set
|
||||
# CONFIG_UART1_RINGINDICATOR is not set
|
||||
|
||||
#
|
||||
# Ethernet driver options
|
||||
#
|
||||
CONFIG_PHY_AUTONEG=y
|
||||
CONFIG_NET_EMACRAM_SIZE=8192
|
||||
CONFIG_NET_NTXDESC=7
|
||||
CONFIG_NET_NRXDESC=7
|
||||
CONFIG_NET_PRIORITY=0
|
||||
# CONFIG_NET_WOL is not set
|
||||
# CONFIG_NET_HASH is not set
|
||||
# CONFIG_NET_MULTICAST is not set
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=8111
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_DRAM_START=0x10000000
|
||||
CONFIG_DRAM_SIZE=32768
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_LPC1766STK=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="olimex-lpc1766stk"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||
# CONFIG_ARCH_BUTTONS is not set
|
||||
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||
CONFIG_NSH_MMCSDMINOR=0
|
||||
CONFIG_NSH_MMCSDSLOTNO=0
|
||||
CONFIG_NSH_MMCSDSPIPORTNO=1
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2011
|
||||
CONFIG_START_MONTH=12
|
||||
CONFIG_START_DAY=30
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_CLOCK is not set
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
# CONFIG_DISABLE_ENVIRON is not set
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_SPI_OWNBUS is not set
|
||||
# CONFIG_SPI_EXCHANGE is not set
|
||||
# CONFIG_SPI_CMDDATA is not set
|
||||
# CONFIG_SPI_BITBANG is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
CONFIG_MMCSD=y
|
||||
CONFIG_MMCSD_NSLOTS=1
|
||||
# CONFIG_MMCSD_READONLY is not set
|
||||
# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set
|
||||
# CONFIG_MMCSD_MMCSUPPORT is not set
|
||||
# CONFIG_MMCSD_HAVECARDDETECT is not set
|
||||
CONFIG_MMCSD_SPI=y
|
||||
CONFIG_MMCSD_SPICLOCK=12500000
|
||||
CONFIG_MMCSD_SPIMODE=0
|
||||
# CONFIG_MMCSD_SDIO is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_NETDEVICES is not set
|
||||
# CONFIG_NET_SLIP is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_UART0=y
|
||||
CONFIG_ARCH_HAVE_UART1=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_STANDARD_SERIAL=y
|
||||
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||
# CONFIG_UART1_SERIAL_CONSOLE is not set
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# UART0 Configuration
|
||||
#
|
||||
CONFIG_UART0_RXBUFSIZE=256
|
||||
CONFIG_UART0_TXBUFSIZE=256
|
||||
CONFIG_UART0_BAUD=57600
|
||||
CONFIG_UART0_BITS=8
|
||||
CONFIG_UART0_PARITY=0
|
||||
CONFIG_UART0_2STOP=0
|
||||
# CONFIG_UART0_IFLOWCONTROL is not set
|
||||
# CONFIG_UART0_OFLOWCONTROL is not set
|
||||
|
||||
#
|
||||
# UART1 Configuration
|
||||
#
|
||||
CONFIG_UART1_RXBUFSIZE=256
|
||||
CONFIG_UART1_TXBUFSIZE=256
|
||||
CONFIG_UART1_BAUD=57600
|
||||
CONFIG_UART1_BITS=8
|
||||
CONFIG_UART1_PARITY=0
|
||||
CONFIG_UART1_2STOP=0
|
||||
# CONFIG_UART1_IFLOWCONTROL is not set
|
||||
# CONFIG_UART1_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
CONFIG_NET=y
|
||||
CONFIG_ARCH_HAVE_PHY=y
|
||||
CONFIG_PHY_KS8721=y
|
||||
# CONFIG_PHY_DP83848C is not set
|
||||
# CONFIG_PHY_LAN8720 is not set
|
||||
# CONFIG_PHY_DM9161 is not set
|
||||
# CONFIG_NET_NOINTS is not set
|
||||
# CONFIG_NET_MULTIBUFFER is not set
|
||||
# CONFIG_NET_PROMISCUOUS is not set
|
||||
# CONFIG_NET_IPv6 is not set
|
||||
CONFIG_NSOCKET_DESCRIPTORS=8
|
||||
CONFIG_NET_NACTIVESOCKETS=16
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
CONFIG_NET_BUFSIZE=562
|
||||
# CONFIG_NET_TCPURGDATA is not set
|
||||
|
||||
#
|
||||
# TCP/IP Networking
|
||||
#
|
||||
CONFIG_NET_TCP=y
|
||||
CONFIG_NET_TCP_CONNS=8
|
||||
CONFIG_NET_MAX_LISTENPORTS=8
|
||||
CONFIG_NET_TCP_READAHEAD_BUFSIZE=562
|
||||
CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
|
||||
CONFIG_NET_TCP_RECVDELAY=0
|
||||
# CONFIG_NET_TCPBACKLOG is not set
|
||||
CONFIG_NET_TCP_SPLIT=y
|
||||
CONFIG_NET_TCP_SPLIT_SIZE=40
|
||||
|
||||
#
|
||||
# UDP Networking
|
||||
#
|
||||
CONFIG_NET_UDP=y
|
||||
CONFIG_NET_UDP_CHECKSUMS=y
|
||||
CONFIG_NET_UDP_CONNS=8
|
||||
# CONFIG_NET_BROADCAST is not set
|
||||
CONFIG_NET_ICMP=y
|
||||
CONFIG_NET_ICMP_PING=y
|
||||
# CONFIG_NET_PINGADDRCONF is not set
|
||||
# CONFIG_NET_IGMP is not set
|
||||
# CONFIG_NET_STATISTICS is not set
|
||||
CONFIG_NET_RECEIVE_WINDOW=562
|
||||
CONFIG_NET_ARPTAB_SIZE=16
|
||||
# CONFIG_NET_ARP_IPIN is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
CONFIG_FS_FAT=y
|
||||
CONFIG_FAT_LCNAMES=y
|
||||
CONFIG_FAT_LFN=y
|
||||
CONFIG_FAT_MAXFNAME=32
|
||||
# CONFIG_FS_FATTIME is not set
|
||||
# CONFIG_FAT_DMAMEMORY is not set
|
||||
# CONFIG_NFS is not set
|
||||
# CONFIG_FS_NXFFS is not set
|
||||
# CONFIG_FS_ROMFS is not set
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
# CONFIG_FS_BINFS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_BINFMT_EXEPATH is not set
|
||||
CONFIG_NXFLAT=y
|
||||
# CONFIG_ELF is not set
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_PIC=y
|
||||
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
# CONFIG_HAVE_CXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NETTEST is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_DISCOVER is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBMSC is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
CONFIG_NETUTILS_DHCPC=y
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
CONFIG_NETUTILS_RESOLV=y
|
||||
CONFIG_NET_RESOLV_ENTRIES=8
|
||||
CONFIG_NET_RESOLV_MAXRESPONSE=96
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
CONFIG_NETUTILS_TELNETD=y
|
||||
CONFIG_NETUTILS_TFTPC=y
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
CONFIG_NETUTILS_UIPLIB=y
|
||||
CONFIG_NETUTILS_WEBCLIENT=y
|
||||
CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
|
||||
# CONFIG_NETUTILS_WEBSERVER is not set
|
||||
# CONFIG_NETUTILS_DISCOVER is not set
|
||||
# CONFIG_NETUTILS_XMLRPC is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
CONFIG_NSH_LIBRARY=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
|
||||
#
|
||||
# Disable Individual commands
|
||||
#
|
||||
# CONFIG_NSH_DISABLE_CAT is not set
|
||||
# CONFIG_NSH_DISABLE_CD is not set
|
||||
# CONFIG_NSH_DISABLE_CP is not set
|
||||
# CONFIG_NSH_DISABLE_DD is not set
|
||||
# CONFIG_NSH_DISABLE_ECHO is not set
|
||||
# CONFIG_NSH_DISABLE_EXEC is not set
|
||||
# CONFIG_NSH_DISABLE_EXIT is not set
|
||||
# CONFIG_NSH_DISABLE_FREE is not set
|
||||
# CONFIG_NSH_DISABLE_GET is not set
|
||||
# CONFIG_NSH_DISABLE_HELP is not set
|
||||
# CONFIG_NSH_DISABLE_HEXDUMP is not set
|
||||
# CONFIG_NSH_DISABLE_IFCONFIG is not set
|
||||
# CONFIG_NSH_DISABLE_KILL is not set
|
||||
# CONFIG_NSH_DISABLE_LOSETUP is not set
|
||||
# CONFIG_NSH_DISABLE_LS is not set
|
||||
# CONFIG_NSH_DISABLE_MB is not set
|
||||
# CONFIG_NSH_DISABLE_MKDIR is not set
|
||||
# CONFIG_NSH_DISABLE_MKFATFS is not set
|
||||
# CONFIG_NSH_DISABLE_MKFIFO is not set
|
||||
# CONFIG_NSH_DISABLE_MKRD is not set
|
||||
# CONFIG_NSH_DISABLE_MH is not set
|
||||
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_MW is not set
|
||||
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_PS is not set
|
||||
# CONFIG_NSH_DISABLE_PING is not set
|
||||
# CONFIG_NSH_DISABLE_PUT is not set
|
||||
# CONFIG_NSH_DISABLE_PWD is not set
|
||||
# CONFIG_NSH_DISABLE_RM is not set
|
||||
# CONFIG_NSH_DISABLE_RMDIR is not set
|
||||
# CONFIG_NSH_DISABLE_SET is not set
|
||||
# CONFIG_NSH_DISABLE_SH is not set
|
||||
# CONFIG_NSH_DISABLE_SLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_TEST is not set
|
||||
# CONFIG_NSH_DISABLE_UMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_UNSET is not set
|
||||
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_WGET is not set
|
||||
# CONFIG_NSH_DISABLE_XD is not set
|
||||
|
||||
#
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
|
||||
#
|
||||
# USB Trace Support
|
||||
#
|
||||
# CONFIG_NSH_CONDEV is not set
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_TELNET=y
|
||||
CONFIG_NSH_TELNETD_PORT=23
|
||||
CONFIG_NSH_TELNETD_DAEMONPRIO=100
|
||||
CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048
|
||||
CONFIG_NSH_TELNETD_CLIENTPRIO=100
|
||||
CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
|
||||
CONFIG_NSH_IOBUFFER_SIZE=512
|
||||
# CONFIG_NSH_TELNET_LOGIN is not set
|
||||
CONFIG_NSH_IPADDR=0x0a000002
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001
|
||||
CONFIG_NSH_NETMASK=0xffffff00
|
||||
CONFIG_NSH_NOMAC=y
|
||||
CONFIG_NSH_MAX_ROUNDTRIP=20
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
|
||||
#
|
||||
# RAM test
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
CONFIG_SYSTEM_READLINE=y
|
||||
CONFIG_READLINE_ECHO=y
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# Zmodem Commands
|
||||
#
|
||||
CONFIG_SYSTEM_ZMODEM=y
|
||||
CONFIG_SYSTEM_ZMODEM_RCVBUFSIZE=512
|
||||
CONFIG_SYSTEM_ZMODEM_PKTBUFSIZE=512
|
||||
CONFIG_SYSTEM_ZMODEM_SNDBUFSIZE=512
|
||||
CONFIG_SYSTEM_ZMODEM_MOUNTPOINT="/tmp"
|
||||
CONFIG_SYSTEM_ZMODEM_SENDSAMPLE=y
|
||||
CONFIG_SYSTEM_ZMODEM_SENDATTN=y
|
||||
CONFIG_SYSTEM_ZMODEM_ALWAYSSINT=y
|
||||
# CONFIG_SYSTEM_ZMODEM_FULLSTREAMING is not set
|
||||
# CONFIG_SYSTEM_ZMODEM_SENDBRAK is not set
|
||||
# CONFIG_SYSTEM_ZMODEM_RESPTIME is not set
|
||||
CONFIG_SYSTEM_ZMODEM_SERIALNO=0
|
||||
CONFIG_SYSTEM_ZMODEM_MAXERRORS=20
|
||||
73
configs/olimex-lpc1766stk/zmodem/setenv.sh
Executable file
73
configs/olimex-lpc1766stk/zmodem/setenv.sh
Executable file
@ -0,0 +1,73 @@
|
||||
#!/bin/bash
|
||||
# configs/olimex-lpc1766stk/zmodem/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
# export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# The Olimex-lpc1766stk/tools directory
|
||||
export LPCTOOL_DIR="${WD}/configs/olimex-lpc1766stk/tools"
|
||||
|
||||
# Add the path to the toolchain and tools directory to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
Loading…
Reference in New Issue
Block a user