Add support for C++ static constructors (at least to a few platforms)

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4438 42af7a65-404d-4744-a932-0658087f49c3

configs/README.txt

@@ -172,8 +172,11 @@ defconfig -- This is a configuration file similar to the Linux
 		  should not be selected if you are not using the GNU toolchain.
 		CONFIG_HAVE_LIBM - toolchain supports libm.a
 		CONFIG_HAVE_CXX - toolchain supports C++ and CXX, CXXFLAGS, and
-		  COMPILEXX have been defined in the configuratins Make.defs
+		  COMPILEXX have been defined in the configurations Make.defs
 		  file.
+		CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+		  for initialization of static C++ instances for this architecture
+		  and for the selected toolchain (via up_cxxinitialize()).
 
 	Building application code:
 

configs/pcblogic-pic32mx/nsh/defconfig

@@ -257,6 +257,9 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
 # CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -345,6 +348,7 @@ CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_DEBUG_SCHED=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=0

configs/sim/nsh/defconfig

@@ -59,6 +59,9 @@ CONFIG_ARCH_BOARD_SIM=y
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
 # CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -120,6 +123,7 @@ CONFIG_DEBUG=y
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=0

configs/sim/nsh2/defconfig

@@ -82,7 +82,10 @@ CONFIG_SIM_TOUCHSCREEN=y
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -166,6 +169,7 @@ CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEBUG_GRAPHICS=n
 CONFIG_DEBUG_INPUT=n
 CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=0

configs/sim/nx/defconfig

@@ -66,6 +66,9 @@ CONFIG_SIM_FBBPP=8
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
 # CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -128,6 +131,7 @@ CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_DEBUG_GRAPHICS=y
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=0

configs/stm3210e-eval/RIDE/defconfig

@@ -261,7 +261,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -351,6 +354,7 @@ CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_DEBUG_SCHED=y
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3210e-eval/buttons/defconfig

@@ -274,7 +274,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -363,6 +366,7 @@ CONFIG_DEBUG=n
 CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3210e-eval/composite/defconfig

@@ -270,7 +270,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -358,6 +361,7 @@ CONFIG_DEBUG_FS=n
 CONFIG_DEBUG_USB=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3210e-eval/nsh/defconfig

@@ -270,7 +270,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -359,6 +362,7 @@ CONFIG_DEBUG=n
 CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3210e-eval/nsh2/defconfig

@@ -318,7 +318,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -410,6 +413,7 @@ CONFIG_DEBUG_USB=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_DEBUG_CAN=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3210e-eval/nx/defconfig

@@ -270,7 +270,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -358,6 +361,7 @@ CONFIG_DEBUG_GRAPHICS=n
 CONFIG_DEBUG_LCD=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3210e-eval/nxlines/defconfig

@@ -270,7 +270,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -358,6 +361,7 @@ CONFIG_DEBUG_GRAPHICS=n
 CONFIG_DEBUG_LCD=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3210e-eval/nxtext/defconfig

@@ -270,7 +270,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -358,6 +361,7 @@ CONFIG_DEBUG_GRAPHICS=n
 CONFIG_DEBUG_LCD=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3210e-eval/ostest/defconfig

@@ -298,7 +298,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -387,6 +390,7 @@ CONFIG_DEBUG=n
 CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3210e-eval/usbserial/defconfig

@@ -272,7 +272,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -362,6 +365,7 @@ CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_USB=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3210e-eval/usbstorage/defconfig

@@ -270,7 +270,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -358,6 +361,7 @@ CONFIG_DEBUG_FS=n
 CONFIG_DEBUG_USB=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3240g-eval/dhcpd/defconfig

@@ -390,7 +390,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -479,6 +482,7 @@ CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_DEBUG_NET=n
 CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_MM_REGIONS=2
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3240g-eval/dhcpd/ld.script

@@ -72,6 +72,12 @@ SECTIONS
 		_etext = ABSOLUTE(.);
 	} > flash
 
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)

configs/stm3240g-eval/nettest/defconfig

@@ -390,7 +390,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -479,6 +482,7 @@ CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_DEBUG_NET=n
 CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_MM_REGIONS=2
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3240g-eval/nettest/ld.script

@@ -72,6 +72,12 @@ SECTIONS
 		_etext = ABSOLUTE(.);
 	} > flash
 
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)

configs/stm3240g-eval/nsh/defconfig

@@ -427,6 +427,9 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
 # CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -524,6 +527,7 @@ CONFIG_DEBUG_PWM=n
 CONFIG_DEBUG_CAN=n
 CONFIG_DEBUG_I2C=n
 CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_MM_REGIONS=2
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3240g-eval/nsh/ld.script

@@ -72,6 +72,12 @@ SECTIONS
 		_etext = ABSOLUTE(.);
 	} > flash
 
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)

configs/stm3240g-eval/nsh2/defconfig

@@ -428,6 +428,9 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
 # CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -526,6 +529,7 @@ CONFIG_DEBUG_CAN=n
 CONFIG_DEBUG_I2C=n
 CONFIG_DEBUG_DMA=n
 CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3240g-eval/nsh2/ld.script

@@ -72,6 +72,12 @@ SECTIONS
 		_etext = ABSOLUTE(.);
 	} > flash
 
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)

configs/stm3240g-eval/ostest/defconfig

@@ -388,7 +388,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -476,6 +479,7 @@ CONFIG_DEBUG=n
 CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=2
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3240g-eval/ostest/ld.script

@@ -72,6 +72,12 @@ SECTIONS
 		_etext = ABSOLUTE(.);
 	} > flash
 
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)

configs/stm3240g-eval/src/Makefile

@@ -42,6 +42,10 @@ AOBJS		= $(ASRCS:.S=$(OBJEXT))
 
 CSRCS		= up_boot.c up_spi.c
 
+ifeq ($(CONFIG_HAVE_CXX),y)
+CSRCS		+= up_cxxinitialize.c
+endif
+
 ifeq ($(CONFIG_ARCH_LEDS),y)
 CSRCS		+= up_autoleds.c
 else

configs/stm3240g-eval/src/up_cxxinitialize.c

@@ -0,0 +1,155 @@
+/************************************************************************************
+ * configs/stm3240g-eval/src/up_cxxinitialize.c
+ * arch/arm/src/board/up_cxxinitialize.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <nuttx/arch.h>
+
+#include <arch/stm32/chip.h>
+#include "chip.h"
+
+#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/* Debug ****************************************************************************/
+/* Non-standard debug that may be enabled just for testing the static constructors */
+
+#ifndef CONFIG_DEBUG
+#  undef CONFIG_DEBUG_CXX
+#endif
+
+#ifdef CONFIG_DEBUG_CXX
+#  define cxxdbg              dbg
+#  define cxxlldbg            lldbg
+#  ifdef CONFIG_DEBUG_VERBOSE
+#    define cxxvdbg           vdbg
+#    define cxxllvdbg         llvdbg
+#  else
+#    define cxxvdbg(x...)
+#    define cxxllvdbg(x...)
+#  endif
+#else
+#  define cxxdbg(x...)
+#  define cxxlldbg(x...)
+#  define cxxvdbg(x...)
+#  define cxxllvdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Types
+ ************************************************************************************/
+/* This type defines one entry in initialization array */
+
+typedef void (*initializer_t)(void);
+
+/************************************************************************************
+ * External references
+ ************************************************************************************/
+/* _sinit and _einit are symbols exported by the linker script that mark the
+ * beginning and the end of the C++ initialization section.
+ */
+
+extern initializer_t _sinit;
+extern initializer_t _einit;
+
+/* _stext and _etext are symbols exported by the linker script that mark the
+ * beginning and the end of text.
+ */
+
+extern uint32_t _stext;
+extern uint32_t _etext;
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/****************************************************************************
+ * Name: up_cxxinitialize
+ *
+ * Description:
+ *   If C++ and C++ static constructors are supported, then this function
+ *   must be provided by board-specific logic in order to perform
+ *   initialization of the static C++ class instances.
+ *
+ *   This function should then be called in the application-specific
+ *   user_start logic in order to perform the C++ initialization.  NOTE
+ *   that no component of the core NuttX RTOS logic is involved; This
+ *   function defintion only provides the 'contract' between application
+ *   specific C++ code and platform-specific toolchain support
+ *
+ ***************************************************************************/
+
+void up_cxxinitialize(void)
+{
+  initializer_t *initp;
+
+  cxxdbg("_sinit: %p _einit: %p _stext: %p _etext: %p\n",
+         &_sinit, &_einit, &_stext, &_etext);
+
+  /* Visit each entry in the initialzation table */
+
+  for (initp = &_sinit; initp != &_einit; initp++)
+    {
+      initializer_t initializer = *initp;
+      cxxdbg("initp: %p initializer: %p\n", initp, initializer);
+
+      /* Make sure that the address is non-NULL and lies in the text region
+       * defined by the linker script.  Some toolchains may put NULL values
+       * or counts in the initialization table
+       */
+
+      if ((void*)initializer > (void*)&_stext && (void*)initializer < (void*)&_etext)
+        {
+          cxxdbg("Calling %p\n", initializer);
+          initializer();
+        }
+    }
+}
+
+#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */
+

configs/stm3240g-eval/telnetd/defconfig

@@ -390,7 +390,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -479,6 +482,7 @@ CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_DEBUG_NET=n
 CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_MM_REGIONS=2
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm3240g-eval/telnetd/ld.script

@@ -72,6 +72,12 @@ SECTIONS
 		_etext = ABSOLUTE(.);
 	} > flash
 
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)

configs/stm32f4discovery/nsh/defconfig

@@ -373,6 +373,9 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
 # CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -470,6 +473,7 @@ CONFIG_DEBUG_PWM=n
 CONFIG_DEBUG_CAN=n
 CONFIG_DEBUG_QENCODER=n
 CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_MM_REGIONS=2
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm32f4discovery/nsh/ld.script

@@ -72,6 +72,12 @@ SECTIONS
 		_etext = ABSOLUTE(.);
 	} > flash
 
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)

configs/stm32f4discovery/ostest/defconfig

@@ -355,7 +355,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -443,6 +446,7 @@ CONFIG_DEBUG=n
 CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=2
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200

configs/stm32f4discovery/ostest/ld.script

@@ -72,6 +72,12 @@ SECTIONS
 		_etext = ABSOLUTE(.);
 	} > flash
 
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)

configs/stm32f4discovery/src/Makefile

@@ -42,6 +42,10 @@ AOBJS		= $(ASRCS:.S=$(OBJEXT))
 
 CSRCS		= up_boot.c up_spi.c
 
+ifeq ($(CONFIG_HAVE_CXX),y)
+CSRCS		+= up_cxxinitialize.c
+endif
+
 ifeq ($(CONFIG_ARCH_LEDS),y)
 CSRCS		+= up_autoleds.c
 else

configs/stm32f4discovery/src/up_cxxinitialize.c

@@ -0,0 +1,155 @@
+/************************************************************************************
+ * configs/stm32f4discovery/src/up_cxxinitialize.c
+ * arch/arm/src/board/up_cxxinitialize.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <nuttx/arch.h>
+
+#include <arch/stm32/chip.h>
+#include "chip.h"
+
+#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/* Debug ****************************************************************************/
+/* Non-standard debug that may be enabled just for testing the static constructors */
+
+#ifndef CONFIG_DEBUG
+#  undef CONFIG_DEBUG_CXX
+#endif
+
+#ifdef CONFIG_DEBUG_CXX
+#  define cxxdbg              dbg
+#  define cxxlldbg            lldbg
+#  ifdef CONFIG_DEBUG_VERBOSE
+#    define cxxvdbg           vdbg
+#    define cxxllvdbg         llvdbg
+#  else
+#    define cxxvdbg(x...)
+#    define cxxllvdbg(x...)
+#  endif
+#else
+#  define cxxdbg(x...)
+#  define cxxlldbg(x...)
+#  define cxxvdbg(x...)
+#  define cxxllvdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Types
+ ************************************************************************************/
+/* This type defines one entry in initialization array */
+
+typedef void (*initializer_t)(void);
+
+/************************************************************************************
+ * External references
+ ************************************************************************************/
+/* _sinit and _einit are symbols exported by the linker script that mark the
+ * beginning and the end of the C++ initialization section.
+ */
+
+extern initializer_t _sinit;
+extern initializer_t _einit;
+
+/* _stext and _etext are symbols exported by the linker script that mark the
+ * beginning and the end of text.
+ */
+
+extern uint32_t _stext;
+extern uint32_t _etext;
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/****************************************************************************
+ * Name: up_cxxinitialize
+ *
+ * Description:
+ *   If C++ and C++ static constructors are supported, then this function
+ *   must be provided by board-specific logic in order to perform
+ *   initialization of the static C++ class instances.
+ *
+ *   This function should then be called in the application-specific
+ *   user_start logic in order to perform the C++ initialization.  NOTE
+ *   that no component of the core NuttX RTOS logic is involved; This
+ *   function defintion only provides the 'contract' between application
+ *   specific C++ code and platform-specific toolchain support
+ *
+ ***************************************************************************/
+
+void up_cxxinitialize(void)
+{
+  initializer_t *initp;
+
+  cxxdbg("_sinit: %p _einit: %p _stext: %p _etext: %p\n",
+         &_sinit, &_einit, &_stext, &_etext);
+
+  /* Visit each entry in the initialzation table */
+
+  for (initp = &_sinit; initp != &_einit; initp++)
+    {
+      initializer_t initializer = *initp;
+      cxxdbg("initp: %p initializer: %p\n", initp, initializer);
+
+      /* Make sure that the address is non-NULL and lies in the text region
+       * defined by the linker script.  Some toolchains may put NULL values
+       * or counts in the initialization table
+       */
+
+      if ((void*)initializer > (void*)&_stext && (void*)initializer < (void*)&_etext)
+        {
+          cxxdbg("Calling %p\n", initializer);
+          initializer();
+        }
+    }
+}
+
+#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */
+

configs/sure-pic32mx/nsh/defconfig

@@ -257,6 +257,9 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
 # CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -349,6 +352,7 @@ CONFIG_DEBUG_USB=n
 CONFIG_PIC32MX_USBDEV_REGDEBUG=n
 
 CONFIG_HAVE_CXX=n
+CONFIG_HAVE_CXXINITIALIZE=n
 CONFIG_MM_REGIONS=1
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=0