onfigs/mx1ads/ostest: Configuration converted to use the kconfig-frontends tools

This commit is contained in:
Gregory Nutt 2014-03-06 09:48:25 -06:00
parent d5fbc4eeac
commit ca916b1060
9 changed files with 675 additions and 341 deletions

View File

@ -6906,3 +6906,5 @@
kconfig-frontends tools (2014-3-6)
* configs/us7032evb1/nsh: Configuration converted to use the
kconfig-frontends tools (2014-3-6)
* configs/mx1ads/ostest: Configuration converted to use the
kconfig-frontends tools (2014-3-6)

View File

@ -5,19 +5,45 @@
if ARCH_CHIP_IMX
config IMX_UART0
bool "UART0"
select ARCH_HAVE_UART0
default n
# choice "iMX Chip Selection"
config ARCH_CHIP_IMX1
bool
default y
menu "iMX Peripheral Selection"
config IMX_UART1
bool "UART1"
select ARCH_HAVE_UART1
default n
select ARCH_HAVE_UART1
config IMX_UART2
bool "UART2"
select ARCH_HAVE_UART2
default n
select ARCH_HAVE_UART2
config IMX_UART3
bool "UART2"
default n
select ARCH_HAVE_UART3
config IMX_SPI1
bool "SPI1"
default n
select SPI
config IMX_SPI2
bool "SPI2"
default n
select SPI
endmenu # iMX Peripheral Selection
config RAM_NUTTXENTRY
hex "NuttX entry point"
default 0x01004000
---help---
The virtual address of the NuttX entry point
endif

View File

@ -107,9 +107,9 @@ void up_addregion(void)
*/
#if !defined(CONFIG_BOOT_RUNFROMFLASH) && !defined(CONFIG_BOOT_COPYTORAM)
# if (CONFIG_DRAM_NUTTXENTRY & 0xffff0000) != CONFIG_RAM_VSTART
# if (CONFIG_RAM_NUTTXENTRY & 0xffff0000) != CONFIG_RAM_VSTART
uint32_t start = CONFIG_RAM_VSTART + 0x1000;
uint32_t end = (CONFIG_DRAM_NUTTXENTRY & 0xffff0000);
uint32_t end = (CONFIG_RAM_NUTTXENTRY & 0xffff0000);
kmm_addregion((FAR void*)start, end - start);
# endif
#endif

View File

@ -216,11 +216,11 @@
* This offset reserves space for the MMU page cache.
*/
#define NUTTX_START_VADDR ((CONFIG_DRAM_NUTTXENTRY & 0xfff00000) | PGTABLE_SIZE)
#define NUTTX_START_VADDR ((CONFIG_RAM_NUTTXENTRY & 0xfff00000) | PGTABLE_SIZE)
#define NUTTX_START_PADDR (IMX_SDRAM0_PSECTION | PGTABLE_SIZE)
#if NUTTX_START_VADDR != CONFIG_DRAM_NUTTXENTRY
# error "CONFIG_DRAM_NUTTXENTRY does not have correct offset for page table"
#if NUTTX_START_VADDR != CONFIG_RAM_NUTTXENTRY
# error "CONFIG_RAM_NUTTXENTRY does not have correct offset for page table"
#endif
/* Section MMU Flags */

View File

@ -63,16 +63,16 @@
/* The i.MX1/L supports 2 SPI interfaces. Which have been enabled? */
#ifndef CONFIG_SPI1_DISABLE
#ifdef CONFIG_IMX_SPI1
# define SPI1_NDX 0 /* Index to SPI1 in g_spidev[] */
# ifndef CONFIG_SPI2_DISABLE
# ifdef CONFIG_IMX_SPI2
# define SPI2_NDX 1 /* Index to SPI2 in g_spidev[] */
# define NSPIS 2 /* Two SPI interfaces: SPI1 & SPI2 */
# else
# define NSPIS 1 /* One SPI interface: SPI1 */
# endif
#else
# ifndef CONFIG_SPI2_DISABLE
# ifdef CONFIG_IMX_SPI2
# define SPI2_NDX 0 /* Index to SPI2 in g_spidev[] */
# define NSPIS 1 /* One SPI interface: SPI2 */
# else
@ -213,7 +213,7 @@ static const struct spi_ops_s g_spiops =
static struct imx_spidev_s g_spidev[] =
{
#ifndef CONFIG_SPI1_DISABLE
#ifdef CONFIG_IMX_SPI1
{
.ops = &g_spiops,
.base = IMX_CSPI1_VBASE,
@ -222,7 +222,7 @@ static struct imx_spidev_s g_spidev[] =
#endif
},
#endif
#ifndef CONFIG_SPI2_DISABLE
#ifdef CONFIG_IMX_SPI2
{
.ops = &g_spiops,
.base = IMX_CSPI2_VBASE,
@ -614,11 +614,11 @@ static inline struct imx_spidev_s *spi_mapirq(int irq)
{
switch (irq)
{
#ifndef CONFIG_SPI1_DISABLE
#ifdef CONFIG_IMX_SPI1
case IMX_IRQ_CSPI1:
return &g_spidev[SPI1_NDX];
#endif
#ifndef CONFIG_SPI2_DISABLE
#ifdef CONFIG_IMX_SPI2
case IMX_IRQ_CSPI2:
return &g_spidev[SPI2_NDX];
#endif
@ -1020,7 +1020,7 @@ FAR struct spi_dev_s *up_spiinitialize(int port)
switch (port)
{
#ifndef CONFIG_SPI1_DISABLE
#ifdef CONFIG_IMX_SPI1
case 1:
/* Select SPI1 */
@ -1035,9 +1035,9 @@ FAR struct spi_dev_s *up_spiinitialize(int port)
imxgpio_configpfinput(GPIOC, 16); /* Port C, pin 16: MISO */
imxgpio_configpfoutput(GPIOC, 17); /* Port C, pin 17: MOSI */
break;
#endif /* CONFIG_SPI1_DISABLE */
#endif /* CONFIG_IMX_SPI1 */
#ifndef CONFIG_SPI2_DISABLE
#ifdef CONFIG_IMX_SPI2
case 2:
/* Select SPI2 */
@ -1087,7 +1087,7 @@ FAR struct spi_dev_s *up_spiinitialize(int port)
imxgpio_configoutput(GPIOD, 10);
#endif
break;
#endif /* CONFIG_SPI2_DISABLE */
#endif /* CONFIG_IMX_SPI2 */
default:
return NULL;

View File

@ -121,18 +121,41 @@ ARM/i.MX1-specific Configuration Options
Configurations
^^^^^^^^^^^^^^
Each MX1ADS configuration is maintained in a sub-directory and
can be selected as follow:
Common Configuration Notes
--------------------------
cd tools
./configure.sh imxads/<subdir>
cd -
. ./setenv.sh
1. Each MX1ADS configuration is maintained in a sub-directory and
can be selected as follow:
cd tools
./configure.sh imxads/<subdir>
cd -
. ./setenv.sh
Where <subdir> is one of the configuration sub-directories described in
the following paragraph.
2. These configurations use the mconf-based configuration tool. To
change a configurations using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
and misc/tools/
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
3. By default, all configurations assume that you are building under
Linux (should work under Windows with Cygwin as well). This is
is easily reconfigured:
CONFIG_HOST_LINUX=y
Configuration Sub-Directories
-----------------------------
Where <subdir> is one of the following:
ostest
^^^^^^
ostest
This configuration directory, performs a simple OS test using
examples/ostest.
This configuration directory, performs a simple OS test using
examples/ostest.

View File

@ -1,39 +0,0 @@
############################################################################
# configs/mx1ads/ostest/appconfig
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Path to example in apps/examples containing the user_start entry point
CONFIGURED_APPS += examples/ostest

View File

@ -1,174 +1,228 @@
############################################################################
# configs/mx1ads/ostest/defconfig
#
# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
CONFIG_NUTTX_NEWCONFIG=y
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
# Build Setup
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
# CONFIG_EXPERIMENTAL is not set
# CONFIG_DEFAULT_SMALL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
#
############################################################################
# Build Configuration
#
# Architecture Selection
# CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
CONFIG_ARCH="arm"
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
# CONFIG_INTELHEX_BINARY is not set
# CONFIG_MOTOROLA_SREC is not set
# CONFIG_RAW_BINARY is not set
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
CONFIG_ARCH_HAVE_STACKCHECK=y
# CONFIG_ARCH_HAVE_HEAPCHECK is not set
# CONFIG_DEBUG_SYMBOLS is not set
CONFIG_ARCH_HAVE_CUSTOMOPT=y
# CONFIG_DEBUG_NOOPT is not set
# CONFIG_DEBUG_CUSTOMOPT is not set
CONFIG_DEBUG_FULLOPT=y
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_A1X is not set
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
CONFIG_ARCH_CHIP_IMX=y
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
# CONFIG_ARCH_CHIP_SAMA5 is not set
# CONFIG_ARCH_CHIP_SAMD is not set
# CONFIG_ARCH_CHIP_SAM34 is not set
# CONFIG_ARCH_CHIP_STM32 is not set
# CONFIG_ARCH_CHIP_STR71X is not set
# CONFIG_ARCH_ARM7TDMI is not set
# CONFIG_ARCH_ARM926EJS is not set
CONFIG_ARCH_ARM920T=y
# CONFIG_ARCH_CORTEXM0 is not set
# CONFIG_ARCH_CORTEXM3 is not set
# CONFIG_ARCH_CORTEXM4 is not set
# CONFIG_ARCH_CORTEXA5 is not set
# CONFIG_ARCH_CORTEXA8 is not set
CONFIG_ARCH_FAMILY="arm"
CONFIG_ARCH_CHIP="imx"
CONFIG_ARCH_CHIP_IMX1=y
CONFIG_ARCH_BOARD="mx1ads"
CONFIG_ARCH_BOARD_MX1ADS=y
CONFIG_BOARD_LOOPSPERMSEC=16945
CONFIG_RAM_SIZE=16777216
CONFIG_RAM_START=0x08000000
CONFIG_RAM_VSTART=0x00000000
CONFIG_RAM_NUTTXENTRY=0x01004000
CONFIG_ARCH_INTERRUPTSTACK=0
CONFIG_ARCH_STACKDUMP=y
#
# ARM-specific configuration
#
# CONFIG_ARCH_HAVE_FPU is not set
# CONFIG_ARCH_HAVE_MPU is not set
CONFIG_ARCH_HAVE_LOWVECTORS=y
CONFIG_ARCH_LOWVECTORS=y
CONFIG_ARCH_ROMPGTABLE=n
# CONFIG_ARCH_ROMPGTABLE is not set
CONFIG_ARCH_CHIP_IMX1=y
#
# IMX specific serial device driver settings
# iMX Peripheral Selection
#
CONFIG_IMX_UART1=y
CONFIG_IMX_UART2=n
CONFIG_IMX_UART3=n
CONFIG_UART1_SERIAL_CONSOLE=y
CONFIG_UART2_SERIAL_CONSOLE=n
CONFIG_UART3_SERIAL_CONSOLE=n
CONFIG_UART1_TXBUFSIZE=256
CONFIG_UART2_TXBUFSIZE=256
CONFIG_UART3_TXBUFSIZE=256
CONFIG_UART1_RXBUFSIZE=256
CONFIG_UART2_RXBUFSIZE=256
CONFIG_UART3_RXBUFSIZE=256
CONFIG_UART1_BAUD=115200
CONFIG_UART2_BAUD=115200
CONFIG_UART3_BAUD=115200
CONFIG_UART1_BITS=8
CONFIG_UART2_BITS=8
CONFIG_UART3_BITS=8
CONFIG_UART1_PARITY=0
CONFIG_UART2_PARITY=0
CONFIG_UART3_PARITY=0
CONFIG_UART1_2STOP=0
CONFIG_UART2_2STOP=0
CONFIG_UART3_2STOP=0
# CONFIG_IMX_UART2 is not set
# CONFIG_IMX_UART3 is not set
CONFIG_IMX_SPI1=y
# CONFIG_IMX_SPI2 is not set
CONFIG_RAM_NUTTXENTRY=0x01004000
#
# IMX specific SPI device driver settings
# Architecture Options
#
CONFIG_SPI1_DISABLE=n
CONFIG_SPI2_DISABLE=y
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
# CONFIG_ARCH_HAVE_IRQPRIO is not set
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_HAVE_MMU=y
# CONFIG_ARCH_NAND_HWECC is not set
# CONFIG_PAGING is not set
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_IDLE_CUSTOM is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
# CONFIG_ARCH_HAVE_RAMVECTORS is not set
#
# General build options
# Board Settings
#
CONFIG_RRLOAD_BINARY=n
CONFIG_INTELHEX_BINARY=n
CONFIG_RAW_BINARY=n
CONFIG_BOARD_LOOPSPERMSEC=16945
# CONFIG_ARCH_CALIBRATION is not set
#
# General OS setup
# Interrupt options
#
CONFIG_USER_ENTRYPOINT="ostest_main"
CONFIG_DEBUG=n
CONFIG_DEBUG_VERBOSE=n
CONFIG_DEBUG_SYMBOLS=n
CONFIG_MM_REGIONS=2
CONFIG_ARCH_LOWPUTC=y
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Boot Memory Configuration
#
CONFIG_RAM_START=0x08000000
CONFIG_RAM_VSTART=0x00000000
CONFIG_RAM_SIZE=16777216
CONFIG_FLASH_START=0x0
CONFIG_FLASH_VSTART=0x0
CONFIG_FLASH_SIZE=0
# CONFIG_ARCH_HAVE_SDRAM is not set
#
# Board Selection
#
CONFIG_ARCH_BOARD_MX1ADS=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="mx1ads"
#
# Common Board Options
#
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_LEDS=y
#
# Board-Specific Options
#
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
# CONFIG_SYSTEM_TIME64 is not set
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_INSTRUMENTATION=n
# CONFIG_SCHED_CPULOAD is not set
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2008
CONFIG_START_MONTH=8
CONFIG_START_DAY=29
CONFIG_JULIAN_TIME=n
CONFIG_DEV_CONSOLE=y
CONFIG_DEV_LOWCONSOLE=n
CONFIG_MUTEX_TYPES=n
CONFIG_PRIORITY_INHERITANCE=n
CONFIG_SEM_PREALLOCHOLDERS=0
CONFIG_SEM_NNESTPRIO=0
CONFIG_FDCLONE_DISABLE=n
CONFIG_FDCLONE_STDIO=n
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_NXFLAT=n
#
# The following can be used to disable categories of
# APIs supported by the OS. If the compiler supports
# weak functions, then it should not be necessary to
# disable functions unless you want to restrict usage
# of those APIs.
#
# There are certain dependency relationships in these
# features.
#
# o mq_notify logic depends on signals to awaken tasks
# waiting for queues to become full or empty.
# o pthread_condtimedwait() depends on signals to wake
# up waiting tasks.
#
CONFIG_DISABLE_CLOCK=n
CONFIG_DISABLE_POSIX_TIMERS=n
CONFIG_DISABLE_PTHREAD=n
CONFIG_DISABLE_SIGNALS=n
CONFIG_DISABLE_MQUEUE=n
CONFIG_DISABLE_MOUNTPOINT=y
# CONFIG_SCHED_WAITPID is not set
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="ostest_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
CONFIG_DISABLE_ENVIRON=y
CONFIG_DISABLE_POLL=y
#
# Misc libc settings
# Signal Numbers
#
CONFIG_NOPRINTF_FIELDWIDTH=n
#
# Allow for architecture optimized implementations
#
# The architecture can provide optimized versions of the
# following to improve sysem performance
#
CONFIG_ARCH_MEMCPY=n
CONFIG_ARCH_MEMCMP=n
CONFIG_ARCH_MEMMOVE=n
CONFIG_ARCH_MEMSET=n
CONFIG_ARCH_STRCMP=n
CONFIG_ARCH_STRCPY=n
CONFIG_ARCH_STRNCPY=n
CONFIG_ARCH_STRLEN=n
CONFIG_ARCH_STRNLEN=n
CONFIG_ARCH_BZERO=n
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
@ -179,151 +233,420 @@ CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=32
CONFIG_NFILE_STREAMS=16
CONFIG_NAME_MAX=32
CONFIG_STDIO_BUFFER_SIZE=64
CONFIG_NUNGET_CHARS=2
CONFIG_PREALLOC_MQ_MSGS=32
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=4
CONFIG_PREALLOC_WDOGS=32
CONFIG_PREALLOC_TIMERS=8
#
# TCP/IP and UDP support via uIP
#
CONFIG_NET=n
CONFIG_NET_IPv6=n
CONFIG_NSOCKET_DESCRIPTORS=0
CONFIG_NET_SOCKOPTS=y
CONFIG_NET_BUFSIZE=420
CONFIG_NET_TCP=n
CONFIG_NET_TCP_CONNS=40
CONFIG_NET_MAX_LISTENPORTS=40
CONFIG_NET_UDP=n
CONFIG_NET_UDP_CHECKSUMS=y
#CONFIG_NET_UDP_CONNS=10
CONFIG_NET_ICMP=n
CONFIG_NET_ICMP_PING=n
#CONFIG_NET_PINGADDRCONF=0
CONFIG_NET_STATISTICS=y
#CONFIG_NET_RECEIVE_WINDOW=
#CONFIG_NET_ARPTAB_SIZE=8
CONFIG_NET_BROADCAST=n
#
# UIP Network Utilities
#
CONFIG_NET_DHCP_LIGHT=n
CONFIG_NET_RESOLV_ENTRIES=4
#
# USB Device Configuration
#
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
CONFIG_USBDEV_DUALSPEED=n
CONFIG_USBDEV_SELFPOWERED=y
CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# IMX USB Configuration
#
CONFIG_IMX_GIO_USBATTACH=6
CONFIG_IMX_GIO_USBDPPULLUP=17
CONFIG_IMX_VENDORID=0xd320
CONFIG_IMX_PRODUCTID=0x3211
CONFIG_IMX_USBDEV_DMA=n
#
# USB Serial Device Configuration
#
CONFIG_PL2303_EPINTIN=3
CONFIG_PL2303_EPBULKOUT=2
CONFIG_PL2303_EPBULKIN=1
CONFIG_PL2303_NWRREQS=4
CONFIG_PL2303_NRDREQS=4
CONFIG_PL2303_VENDORID=0x067b
CONFIG_PL2303_PRODUCTID=0x2303
CONFIG_PL2303_VENDORSTR="Nuttx"
CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
CONFIG_PL2303_RXBUFSIZE=512
CONFIG_PL2303_TXBUFSIZE=512
#
# USB Storage Device Configuration
#
CONFIG_USBMSC_EP0MAXPACKET=64
CONFIG_USBMSC_EPBULKOUT=2
CONFIG_USBMSC_EPBULKIN=1
CONFIG_USBMSC_NRDREQS=2
CONFIG_USBMSC_NWRREQS=2
CONFIG_USBMSC_BULKINREQLEN=256
CONFIG_USBMSC_BULKOUTREQLEN=256
CONFIG_USBMSC_VENDORID=0x584e
CONFIG_USBMSC_VENDORSTR="NuttX"
CONFIG_USBMSC_PRODUCTID=0x5342
CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
CONFIG_USBMSC_VERSIONNO=0x0399
CONFIG_USBMSC_REMOVABLE=y
#
# Settings for examples/uip
CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
CONFIG_EXAMPLES_UIP_DHCPC=n
#
# Settings for examples/nettest
CONFIG_EXAMPLES_NETTEST_SERVER=n
CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
CONFIG_EXAMPLES_NETTEST_NOMAC=n
CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
#
# Settings for examples/nsh
CONFIG_NSH_CONSOLE=y
CONFIG_NSH_TELNET=n
CONFIG_NSH_IOBUFFER_SIZE=512
CONFIG_NSH_CMD_SIZE=40
CONFIG_NSH_DHCPC=n
CONFIG_NSH_NOMAC=n
CONFIG_NSH_IPADDR=0x0a000002
CONFIG_NSH_DRIPADDR=0x0a000001
CONFIG_NSH_NETMASK=0xffffff00
#
# DM90x0 Driver Settings
CONFIG_NET_DM90x0=n
CONFIG_DM9X_NINTERFACES=1
CONFIG_DM9X_STATS=n
CONFIG_DM9X_BASE=0xd0000300
CONFIG_DM9X_IRQ=27
CONFIG_DM9X_BUSWIDTH8=n
CONFIG_DM9X_BUSWIDTH16=y
CONFIG_DM9X_BUSWIDTH32=n
CONFIG_DM9X_CHECKSUM=n
CONFIG_DM9X_ETRANS=n
#
# Stack and heap information
#
CONFIG_BOOT_RUNFROMFLASH=n
CONFIG_BOOT_COPYTORAM=n
CONFIG_CUSTOM_STACK=n
CONFIG_IDLETHREAD_STACKSIZE=4096
CONFIG_USERMAIN_STACKSIZE=4096
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=4096
#
# Maintain legacy build behavior (revisit)
# Device Drivers
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
# CONFIG_PWM is not set
# CONFIG_ARCH_HAVE_I2CRESET is not set
# CONFIG_I2C is not set
CONFIG_SPI=y
# CONFIG_SPI_OWNBUS is not set
# CONFIG_SPI_EXCHANGE is not set
# CONFIG_SPI_CMDDATA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_I2S is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_AUDIO_DEVICES is not set
# CONFIG_VIDEO_DEVICES is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
# CONFIG_16550_UART is not set
# CONFIG_ARCH_HAVE_UART is not set
# CONFIG_ARCH_HAVE_UART0 is not set
CONFIG_ARCH_HAVE_UART1=y
# CONFIG_ARCH_HAVE_UART2 is not set
# CONFIG_ARCH_HAVE_UART3 is not set
# CONFIG_ARCH_HAVE_UART4 is not set
# CONFIG_ARCH_HAVE_UART5 is not set
# CONFIG_ARCH_HAVE_UART6 is not set
# CONFIG_ARCH_HAVE_UART7 is not set
# CONFIG_ARCH_HAVE_UART8 is not set
# CONFIG_ARCH_HAVE_SCI0 is not set
# CONFIG_ARCH_HAVE_SCI1 is not set
# CONFIG_ARCH_HAVE_USART0 is not set
# CONFIG_ARCH_HAVE_USART1 is not set
# CONFIG_ARCH_HAVE_USART2 is not set
# CONFIG_ARCH_HAVE_USART3 is not set
# CONFIG_ARCH_HAVE_USART4 is not set
# CONFIG_ARCH_HAVE_USART5 is not set
# CONFIG_ARCH_HAVE_USART6 is not set
# CONFIG_ARCH_HAVE_USART7 is not set
# CONFIG_ARCH_HAVE_USART8 is not set
#
# USART Configuration
#
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
CONFIG_UART1_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# UART1 Configuration
#
CONFIG_UART1_RXBUFSIZE=256
CONFIG_UART1_TXBUFSIZE=256
CONFIG_UART1_BAUD=115200
CONFIG_UART1_BITS=8
CONFIG_UART1_PARITY=0
CONFIG_UART1_2STOP=0
# CONFIG_UART1_IFLOWCONTROL is not set
# CONFIG_UART1_OFLOWCONTROL is not set
# CONFIG_SERIAL_IFLOWCONTROL is not set
# CONFIG_SERIAL_OFLOWCONTROL is not set
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
CONFIG_MMCSD=y
CONFIG_MMCSD_SPI=y
CONFIG_MTD=y
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_ARCH_HAVE_NET is not set
# CONFIG_ARCH_HAVE_PHY is not set
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
CONFIG_DISABLE_MOUNTPOINT=y
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
# CONFIG_FS_READABLE is not set
# CONFIG_FS_WRITABLE is not set
# CONFIG_FS_RAMMAP is not set
# CONFIG_FS_PROCFS is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
#
# Graphics Support
#
# CONFIG_NX is not set
#
# Memory Management
#
# CONFIG_MM_MULTIHEAP is not set
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=2
CONFIG_ARCH_HAVE_HEAP2=y
CONFIG_HEAP2_BASE=0x00000000
CONFIG_HEAP2_SIZE=0
# CONFIG_GRAN is not set
#
# Audio Support
#
# CONFIG_AUDIO is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
# CONFIG_BUILTIN is not set
# CONFIG_PIC is not set
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=64
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
CONFIG_LIB_RAND_ORDER=1
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Library Support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_LIB_KBDCODEC is not set
# CONFIG_LIB_SLCDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
# CONFIG_HAVE_CXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_CONFIGDATA is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_NRF24L01TERM is not set
# CONFIG_EXAMPLES_NSH is not set
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
CONFIG_EXAMPLES_OSTEST=y
CONFIG_EXAMPLES_OSTEST_LOOPS=1
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=8
CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POLL is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_SLCD is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TCPECHO is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
# CONFIG_NSH_LIBRARY is not set
#
# NxWidgets/NxWM
#
#
# Platform-specific Support
#
# CONFIG_PLATFORM_CONFIGDATA is not set
#
# System Libraries and NSH Add-Ons
#
#
# USB CDC/ACM Device Commands
#
#
# USB Composite Device Commands
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# INI File Parser
#
# CONFIG_SYSTEM_INIFILE is not set
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# FLASH Erase-all Command
#
#
# NxPlayer media player library / command Line
#
# CONFIG_SYSTEM_NXPLAYER is not set
#
# RAM test
#
# CONFIG_SYSTEM_RAMTEST is not set
#
# readline()
#
# CONFIG_SYSTEM_READLINE is not set
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
# CONFIG_SYSTEM_SYSINFO is not set
#
# USB Monitor
#
#
# EMACS-like Command Line Editor
#
# CONFIG_SYSTEM_CLE is not set
#
# VI Work-Alike Editor
#
# CONFIG_SYSTEM_VI is not set
#
# Stack Monitor
#
#
# USB Mass Storage Device Commands
#
#
# Zmodem Commands
#
# CONFIG_SYSTEM_ZMODEM is not set

View File

@ -78,12 +78,11 @@ Common Configuration Notes
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
3. By default, all configurations assume the NuttX Buildroot toolchain
under Linux (should work under Windows with Cygwin as well). This
3. By default, all configurations assume that you are building under
Linux (should work under Windows with Cygwin as well). This is
is easily reconfigured:
CONFIG_HOST_LINUX=y
CONFIG_ARM_TOOLCHAIN_BUILDROOT=y
Configuration Sub-Directories
-----------------------------