sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console

Browse Source
This commit is contained in:
Gregory Nutt 2014-04-01 11:24:15 -06:00
parent 3d8cbb415c
commit cbdc9155ab
16 changed files with 1076 additions and 150 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
ChangeLog
View File

@ -7104,4 +7104,7 @@
arm_head.S (2014-3-31).
* arch/arm/src/sama5/chip/sam_dbgu.h: Add SAMA5D3 DBGU definition
header file (2014-3031).
* arch/arm/src/sama5/sam_dbgu.c and .h: Add support for the SAMA5D3
DBGU (2014-4-1).
* configs/sama5d3-xplained/nsh: Configurations now use the DBGU for
the serial console (instead of USART1) (2014-4-1).

1
arch/arm/src/calypso/Kconfig
View File

@ -96,6 +96,7 @@ endmenu
choice
prompt "Serial Console Selection"
default SERIAL_CONSOLE_NONE
depends on DEV_CONSOLE
# See drivers/Kconfig
config USE_SERCOMM_CONSOLE

37
arch/arm/src/sama5/Kconfig
View File

@ -345,6 +345,43 @@ config SAMA5_PIOE_IRQ
endif # PIO_IRQ
menu "DBGU Configuration"
depends on SAMA5_DBGU
config SAMA5_DBGU_CONSOLE
bool "DBGU serial console"
---help---
Select to use the DBGU as the serial console.
config SAMA5_DBGU_RXBUFSIZE
int "Receive buffer size"
default 256
---help---
Characters are buffered as they are received. This specifies
the size of the receive buffer.
config SAMA5_DBGU_TXBUFSIZE
int "Transmit buffer size"
default 256
---help---
Characters are buffered before being sent. This specifies
the size of the transmit buffer.
config SAMA5_DBGU_BAUD
int "BAUD rate"
default 115200
---help---
The configured BAUD of the UART.
config SAMA5_DBGU_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
endmenu #DBGU Configuration
if SAMA5_LCDC
menu "LCDC Configuration"

4
arch/arm/src/sama5/Make.defs
View File

@ -119,6 +119,10 @@ ifeq ($(CONFIG_SAMA5_WDT),y)
CHIP_CSRCS += sam_wdt.c
endif
ifeq ($(CONFIG_SAMA5_DBGU),y)
CHIP_CSRCS += sam_dbgu.c
endif
ifeq ($(CONFIG_SAMA5_TRNG),y)
CHIP_CSRCS += sam_trng.c
endif

631
arch/arm/src/sama5/sam_dbgu.c Normal file
View File

@ -0,0 +1,631 @@
/****************************************************************************
* arch/arm/src/sama5/sam_dbgu.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <unistd.h>
#include <semaphore.h>
#include <string.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <nuttx/serial/serial.h>
#include <arch/serial.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "os_internal.h"
#include "chip.h"
#include "chip/sam_dbgu.h"
#include "chip/sam_pinmap.h"
#include "sam_pio.h"
#include "sam_dbgu.h"
#ifdef CONFIG_SAMA5_DBGU
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
#ifdef USE_SERIALDRIVER
struct dbgu_dev_s
{
uint32_t sr; /* Saved status bits */
};
#endif
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int dbgu_setup(struct uart_dev_s *dev);
#ifdef USE_SERIALDRIVER
static void dbgu_shutdown(struct uart_dev_s *dev);
static int dbgu_attach(struct uart_dev_s *dev);
static void dbgu_detach(struct uart_dev_s *dev);
static int dbgu_interrupt(int irq, void *context);
static int dbgu_ioctl(struct file *filep, int cmd, unsigned long arg);
static int dbgu_receive(struct uart_dev_s *dev, uint32_t *status);
static void dbgu_rxint(struct uart_dev_s *dev, bool enable);
static bool dbgu_rxavailable(struct uart_dev_s *dev);
static void dbgu_send(struct uart_dev_s *dev, int ch);
static void dbgu_txint(struct uart_dev_s *dev, bool enable);
static bool dbgu_txready(struct uart_dev_s *dev);
static bool dbgu_txempty(struct uart_dev_s *dev);
/****************************************************************************
* Private Variables
****************************************************************************/
static const struct uart_ops_s g_uart_ops =
{
.setup = dbgu_setup,
.shutdown = dbgu_shutdown,
.attach = dbgu_attach,
.detach = dbgu_detach,
.ioctl = dbgu_ioctl,
.receive = dbgu_receive,
.rxint = dbgu_rxint,
.rxavailable = dbgu_rxavailable,
.send = dbgu_send,
.txint = dbgu_txint,
.txready = dbgu_txready,
.txempty = dbgu_txempty,
};
/* DBGU I/O buffers */
static char g_dbgu_rxbuffer[CONFIG_SAMA5_DBGU_RXBUFSIZE];
static char g_dbgu_txbuffer[CONFIG_SAMA5_DBGU_TXBUFSIZE];
/* This describes the private state of the DBGU port */
static struct dbgu_dev_s g_dbgu_priv;
/* This describes the state of the DBGU port as is visible from the upper
* half serial driver.
*/
static uart_dev_t g_dbgu_port =
{
.recv =
{
.size = CONFIG_SAMA5_DBGU_RXBUFSIZE,
.buffer = g_dbgu_rxbuffer,
},
.xmit =
{
.size = CONFIG_SAMA5_DBGU_TXBUFSIZE,
.buffer = g_dbgu_txbuffer,
},
.ops = &g_uart_ops,
.priv = &g_dbgu_priv,
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: dbgu_configure
*
* Description:
* Configure the DBGU baud, bits, parity, etc. This method is called the
* first time that the serial port is opened.
*
****************************************************************************/
static void dbgu_configure(void)
{
#ifndef CONFIG_SUPPRESS_UART_CONFIG
uint32_t regval;
/* Set up the mode register. Start with normal DBGU mode and the MCK
* as the timing source
*/
regval = DBGU_MR_CHMODE_NORMAL;
/* OR in settings for the selected parity */
#if CONFIG_SAMA5_DBGU_PARITY == 1
regval |= DBGU_MR_PAR_ODD;
#elif CONFIG_SAMA5_DBGU_PARITY == 2
regval |= DBGU_MR_PAR_EVEN;
#else
regval |= DBGU_MR_PAR_NONE;
#endif
/* And save the new mode register value */
putreg32(regval, SAM_DBGU_MR);
/* Configure the console baud. NOTE: Oversampling by 8 is not supported.
* This may limit BAUD rates for lower DBGU clocks.
*/
regval = (BOARD_MCK_FREQUENCY + (CONFIG_SAMA5_DBGU_BAUD << 3)) /
(CONFIG_SAMA5_DBGU_BAUD << 4);
putreg32(regval, SAM_DBGU_BRGR);
/* Enable receiver & transmitter */
putreg32((DBGU_CR_RXEN|DBGU_CR_TXEN), SAM_DBGU_CR);
#endif
}
/****************************************************************************
* Name: dbgu_setup
*
* Description:
* Configure the DBGU baud, bits, parity, etc. This method is called the
* first time that the serial port is opened.
*
****************************************************************************/
static int dbgu_setup(struct uart_dev_s *dev)
{
#ifndef CONFIG_SUPPRESS_UART_CONFIG
/* The shutdown method will put the DBGU in a known, disabled state */
dbgu_shutdown(dev);
/* Then configure the DBGU */
dbgu_configure();
#endif
return OK;
}
/****************************************************************************
* Name: dbgu_shutdown
*
* Description:
* Disable the DBGU. This method is called when the serial
* port is closed
*
****************************************************************************/
static void dbgu_shutdown(struct uart_dev_s *dev)
{
irqstate_t flags;
/* The following must be atomic */
flags = irqsave();
/* Reset and disable receiver and transmitter */
putreg32((DBGU_CR_RSTRX|DBGU_CR_RSTTX|DBGU_CR_RXDIS|DBGU_CR_TXDIS), SAM_DBGU_CR);
/* Disable all interrupts */
putreg32(DBGU_INT_ALLINTS, SAM_DBGU_IDR);
irqrestore(flags);
}
/****************************************************************************
* Name: dbgu_attach
*
* Description:
* Configure the DBGU to operation in interrupt driven mode. This method is
* called when the serial port is opened. Normally, this is just after the
* the setup() method is called, however, the serial console may operate in
* a non-interrupt driven mode during the boot phase.
*
* RX and TX interrupts are not enabled when by the attach method (unless the
* hardware supports multiple levels of interrupt enabling). The RX and TX
* interrupts are not enabled until the txint() and rxint() methods are called.
*
****************************************************************************/
static int dbgu_attach(struct uart_dev_s *dev)
{
int ret;
/* Attach and enable the IRQ */
ret = irq_attach(SAM_IRQ_DBGU, dbgu_interrupt);
if (ret == OK)
{
/* Enable the interrupt (RX and TX interrupts are still disabled
* in the DBGU
*/
up_enable_irq(SAM_IRQ_DBGU);
}
return ret;
}
/****************************************************************************
* Name: dbgu_detach
*
* Description:
* Detach DBGU interrupts. This method is called when the serial port is
* closed normally just before the shutdown method is called. The exception
* is the serial console which is never shutdown.
*
****************************************************************************/
static void dbgu_detach(struct uart_dev_s *dev)
{
up_disable_irq(SAM_IRQ_DBGU);
irq_detach(SAM_IRQ_DBGU);
}
/****************************************************************************
* Name: dbgu_interrupt
*
* Description:
* This is the DBGU interrupt handler. It will be invoked when an
* interrupt received on the 'irq' It should call uart_transmitchars or
* uart_receivechar to perform the appropriate data transfers. The
* interrupt handling logic must be able to map the 'irq' number into the
* appropriate uart_dev_s structure in order to call these functions.
*
****************************************************************************/
static int dbgu_interrupt(int irq, void *context)
{
struct uart_dev_s *dev = &g_dbgu_port;
struct dbgu_dev_s *priv = (struct dbgu_dev_s*)dev->priv;
uint32_t pending;
uint32_t imr;
int passes;
bool handled;
/* Loop until there are no characters to be transferred or, until we have
* been looping for a long time.
*/
handled = true;
for (passes = 0; passes < 256 && handled; passes++)
{
handled = false;
/* Get the DBGU/DBGU status (we are only interested in the unmasked interrupts). */
priv->sr = getreg32(SAM_DBGU_SR); /* Save for error reporting */
imr = getreg32(SAM_DBGU_IMR); /* Interrupt mask */
pending = priv->sr & imr; /* Mask out disabled interrupt sources */
/* Handle an incoming, receive byte. RXRDY: At least one complete character
* has been received and US_RHR has not yet been read.
*/
if ((pending & DBGU_INT_RXRDY) != 0)
{
/* Received data ready... process incoming bytes */
uart_recvchars(dev);
handled = true;
}
/* Handle outgoing, transmit bytes. XRDY: There is no character in the
* US_THR.
*/
if ((pending & DBGU_INT_TXRDY) != 0)
{
/* Transmit data register empty ... process outgoing bytes */
uart_xmitchars(dev);
handled = true;
}
}
return OK;
}
/****************************************************************************
* Name: dbgu_ioctl
*
* Description:
* All ioctl calls will be routed through this method
*
****************************************************************************/
static int dbgu_ioctl(struct file *filep, int cmd, unsigned long arg)
{
#ifdef CONFIG_SERIAL_TIOCSERGSTRUCT
struct inode *inode = filep->f_inode;
struct uart_dev_s *dev = inode->i_private;
#endif
int ret = OK;
switch (cmd)
{
#ifdef CONFIG_SERIAL_TIOCSERGSTRUCT
case TIOCSERGSTRUCT:
{
struct dbgu_dev_s *user = (struct dbgu_dev_s*)arg;
if (!user)
{
ret = -EINVAL;
}
else
{
memcpy(user, dev, sizeof(struct dbgu_dev_s));
}
}
break;
#endif
default:
ret = -ENOTTY;
break;
}
return ret;
}
/****************************************************************************
* Name: dbgu_receive
*
* Description:
* Called (usually) from the interrupt level to receive one
* character from the DBGU. Error bits associated with the
* receipt are provided in the return 'status'.
*
****************************************************************************/
static int dbgu_receive(struct uart_dev_s *dev, uint32_t *status)
{
struct dbgu_dev_s *priv = (struct dbgu_dev_s*)dev->priv;
/* Return the error information in the saved status */
*status = priv->sr;
priv->sr = 0;
/* Then return the actual received byte */
return (int)(getreg32(SAM_DBGU_RHR) & 0xff);
}
/****************************************************************************
* Name: dbgu_rxint
*
* Description:
* Call to enable or disable RXRDY interrupts
*
****************************************************************************/
static void dbgu_rxint(struct uart_dev_s *dev, bool enable)
{
if (enable)
{
/* Receive an interrupt when their is anything in the Rx data register (or an Rx
* timeout occurs).
*/
#ifndef CONFIG_SUPPRESS_SERIAL_INTS
putreg32(DBGU_INT_RXRDY, SAM_DBGU_IER);
#endif
}
else
{
putreg32(DBGU_INT_RXRDY, SAM_DBGU_IDR);
}
}
/****************************************************************************
* Name: dbgu_rxavailable
*
* Description:
* Return true if the receive holding register is not empty
*
****************************************************************************/
static bool dbgu_rxavailable(struct uart_dev_s *dev)
{
return ((getreg32(SAM_DBGU_SR) & DBGU_INT_RXRDY) != 0);
}
/****************************************************************************
* Name: dbgu_send
*
* Description:
* This method will send one byte on the DBGU/DBGU
*
****************************************************************************/
static void dbgu_send(struct uart_dev_s *dev, int ch)
{
putreg32((uint32_t)ch, SAM_DBGU_THR);
}
/****************************************************************************
* Name: dbgu_txint
*
* Description:
* Call to enable or disable TX interrupts
*
****************************************************************************/
static void dbgu_txint(struct uart_dev_s *dev, bool enable)
{
irqstate_t flags;
flags = irqsave();
if (enable)
{
/* Set to receive an interrupt when the TX holding register register
* is empty
*/
#ifndef CONFIG_SUPPRESS_SERIAL_INTS
putreg32(DBGU_INT_TXRDY, SAM_DBGU_IER);
/* Fake a TX interrupt here by just calling uart_xmitchars() with
* interrupts disabled (note this may recurse).
*/
uart_xmitchars(dev);
#endif
}
else
{
/* Disable the TX interrupt */
putreg32(DBGU_INT_TXRDY, SAM_DBGU_IDR);
}
irqrestore(flags);
}
/****************************************************************************
* Name: dbgu_txready
*
* Description:
* Return true if the transmit holding register is empty (TXRDY)
*
****************************************************************************/
static bool dbgu_txready(struct uart_dev_s *dev)
{
return ((getreg32(SAM_DBGU_SR) & DBGU_INT_TXRDY) != 0);
}
/****************************************************************************
* Name: dbgu_txempty
*
* Description:
* Return true if the transmit holding and shift registers are empty
*
****************************************************************************/
static bool dbgu_txempty(struct uart_dev_s *dev)
{
return ((getreg32(SAM_DBGU_SR) & DBGU_INT_TXEMPTY) != 0);
}
/****************************************************************************
* Name: sam_dbgu_devinitialize
*
* Description:
* Performs the low level DBGU initialization early in debug so that the
* DBGU console will be available during bootup. This must be called
* before getreg32it.
*
****************************************************************************/
void sam_dbgu_devinitialize(void)
{
/* Disable all DBGU interrupts */
putreg32(DBGU_INT_ALLINTS, SAM_DBGU_IDR);
#ifdef CONFIG_SAMA5_DBGU_CONSOLE
/* Configuration the DBGU as the the console */
g_dbgu_port.isconsole = true;
dbgu_configure();
#endif
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: sam_dbgu_register
*
* Description:
* Register DBBU console and serial port. This assumes that
* sam_dbgu_initialize() was called previously.
*
****************************************************************************/
void sam_dbgu_register(void)
{
/* Register the console */
#ifdef CONFIG_SAMA5_DBGU_CONSOLE
(void)uart_register("/dev/console", &g_dbgu_port);
#endif
/* Register the DBGU serial device */
(void)uart_register("/dev/ttyDBGU", &g_dbgu_port);
}
#endif /* USE_SERIALDRIVER */
/****************************************************************************
* Name: sam_dbgu_initialize
*
* Description:
* Performs the low level DBGU initialization early in debug so that the
* DBGU console will be available during bootup. This must be called
* before getreg32it.
*
****************************************************************************/
void sam_dbgu_initialize(void)
{
/* Initialize DBGU pins */
(void)sam_configpio(PIO_DBGU_DRXD);
(void)sam_configpio(PIO_DBGU_DTXD);
#if defined(USE_SERIALDRIVER)
/* Initialize the DBGU device driver */
sam_dbgu_devinitialize();
#elif defined(CONFIG_SAMA5_DBGU_CONSOLE)
sam_dbgu_configure();
#endif
}
#endif /* CONFIG_SAMA5_DBGU */

109
arch/arm/src/sama5/sam_dbgu.h Normal file
View File

@ -0,0 +1,109 @@
/****************************************************************************
* arch/arm/src/sama5/sam_dbgu.h
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __ARCH_ARM_SRC_SAMA5_SAM_DBGU_H
#define __ARCH_ARM_SRC_SAMA5_SAM_DBGU_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include "up_internal.h"
#ifdef CONFIG_SAMA5_DBGU
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Inline Functions
****************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************
* Public Data
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: sam_dbgu_initialize
*
* Description:
* Performs the low level DBGU initialization early in debug so that the
* DBGU console will be available during bootup.
*
****************************************************************************/
void sam_dbgu_initialize(void);
/****************************************************************************
* Name: sam_dbgu_register
*
* Description:
* Register DBBU console and serial port. This assumes that
* sam_dbgu_initialize() was called previously.
*
****************************************************************************/
void sam_dbgu_register(void);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_SAMA5_DBGU */
#endif /* __ARCH_ARM_SRC_SAMA5_SAM_DBGU_H */

81
arch/arm/src/sama5/sam_lowputc.c
View File

@ -49,9 +49,11 @@
#include "sam_pio.h"
#include "sam_periphclks.h"
#include "sam_dbgu.h"
#include "sam_lowputc.h"
#include "chip/sam_uart.h"
#include "chip/sam_dbgu.h"
#include "chip/sam_pinmap.h"
/**************************************************************************
@ -79,57 +81,72 @@
/* Is there a serial console? It could be on UART0-1 or USART0-3 */
#if defined(CONFIG_UART0_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_UART0)
#if defined(CONFIG_SAMA5_DBGU_CONSOLE) && defined(CONFIG_SAMA5_DBGU)
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# undef HAVE_UART_CONSOLE
#elif defined(CONFIG_UART0_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_UART0)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_UART_CONSOLE 1
#elif defined(CONFIG_UART1_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_UART1)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# define HAVE_UART_CONSOLE 1
#elif defined(CONFIG_USART0_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_USART0)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# define HAVE_UART_CONSOLE 1
#elif defined(CONFIG_USART1_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_USART1)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# define HAVE_UART_CONSOLE 1
#elif defined(CONFIG_USART2_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_USART2)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# define HAVE_UART_CONSOLE 1
#elif defined(CONFIG_USART3_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_USART3)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# define HAVE_UART_CONSOLE 1
#else
# warning "No valid CONFIG_USARTn_SERIAL_CONSOLE Setting"
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# undef HAVE_CONSOLE
# undef HAVE_UART_CONSOLE
#endif
/* The UART/USART modules are driven by the main clock (MCK). */
@ -139,7 +156,13 @@
/* Select USART parameters for the selected console */
#if defined(CONFIG_UART0_SERIAL_CONSOLE)
#if defined(CONFIG_SAMA5_DBGU_CONSOLE)
# define SAM_CONSOLE_VBASE SAM_DBGU_VBASE
# define SAM_CONSOLE_BAUD CONFIG_SAMA5_DBGU_BAUD
# define SAM_CONSOLE_BITS 8
# define SAM_CONSOLE_PARITY CONFIG_SAMA5_DBGU_PARITY
# define SAM_CONSOLE_2STOP 0
#elif defined(CONFIG_UART0_SERIAL_CONSOLE)
# define SAM_CONSOLE_VBASE SAM_UART0_VBASE
# define SAM_CONSOLE_BAUD CONFIG_UART0_BAUD
# define SAM_CONSOLE_BITS CONFIG_UART0_BITS
@ -247,7 +270,7 @@
void up_lowputc(char ch)
{
#ifdef HAVE_CONSOLE
#if defined(HAVE_UART_CONSOLE)
irqstate_t flags;
for (;;)
@ -272,6 +295,31 @@ void up_lowputc(char ch)
return;
}
irqrestore(flags);
}
#elif defined(CONFIG_SAMA5_DBGU_CONSOLE)
irqstate_t flags;
for (;;)
{
/* Wait for the transmitter to be available */
while ((getreg32(SAM_DBGU_SR) & DBGU_INT_TXEMPTY) == 0);
/* Disable interrupts so that the test and the transmission are
* atomic.
*/
flags = irqsave();
if ((getreg32(SAM_DBGU_SR) & DBGU_INT_TXEMPTY) != 0)
{
/* Send the character */
putreg32((uint32_t)ch, SAM_DBGU_THR);
irqrestore(flags);
return;
}
irqrestore(flags);
}
#endif
@ -287,7 +335,7 @@ void up_lowputc(char ch)
int up_putc(int ch)
{
#ifdef HAVE_CONSOLE
#if defined(HAVE_UART_CONSOLE) || defined(CONFIG_SAMA5_DBGU_CONSOLE)
/* Check for LF */
if (ch == '\n')
@ -298,9 +346,9 @@ int up_putc(int ch)
}
up_lowputc(ch);
#endif
return ch;
}
#endif
/**************************************************************************
* Name: sam_lowsetup
@ -392,7 +440,8 @@ void sam_lowsetup(void)
#endif
/* Configure the console (only) */
#if defined(HAVE_CONSOLE) && !defined(CONFIG_SUPPRESS_UART_CONFIG)
#if defined(HAVE_UART_CONSOLE) && !defined(CONFIG_SUPPRESS_UART_CONFIG)
/* Reset and disable receiver and transmitter */
putreg32((UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS),
@ -418,4 +467,10 @@ void sam_lowsetup(void)
putreg32((UART_CR_RXEN | UART_CR_TXEN),
SAM_CONSOLE_VBASE + SAM_UART_CR_OFFSET);
#endif
#ifdef CONFIG_SAMA5_DBGU
/* Initialize the DBGU (might be the serial console) */
sam_dbgu_initialize();
#endif
}

106
arch/arm/src/sama5/sam_serial.c
View File

@ -61,9 +61,11 @@
#include "chip.h"
#include "chip/sam_uart.h"
#include "sam_dbgu.h"
#include "sam_serial.h"
/****************************************************************************
* Definitions
* Pre-processor Definitions
****************************************************************************/
/* Some sanity checks *******************************************************/
@ -87,10 +89,8 @@
/* Is there a USART/USART enabled? */
#if !defined(CONFIG_SAMA5_UART0) && !defined(CONFIG_SAMA5_UART1) && \
!defined(CONFIG_SAMA5_USART0) && !defined(CONFIG_SAMA5_USART1) && \
!defined(CONFIG_SAMA5_USART2) && !defined(CONFIG_SAMA5_USART3)
# error "No USARTs enabled"
#if defined(CONFIG_SAMA5_UART0) || defined(CONFIG_SAMA5_UART1)
# define HAVE_UART
#endif
#if defined(CONFIG_SAMA5_USART0) || defined(CONFIG_SAMA5_USART1) ||\
@ -100,57 +100,72 @@
/* Is there a serial console? It could be on UART0-1 or USART0-3 */
#if defined(CONFIG_UART0_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_UART0)
#if defined(CONFIG_SAMA5_DBGU_CONSOLE) && defined(CONFIG_SAMA5_DBGU)
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# undef HAVE_UART_CONSOLE
#elif defined(CONFIG_UART0_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_UART0)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_UART_CONSOLE 1
#elif defined(CONFIG_UART1_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_UART1)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# define HAVE_UART_CONSOLE 1
#elif defined(CONFIG_USART0_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_USART0)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# define HAVE_UART_CONSOLE 1
#elif defined(CONFIG_USART1_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_USART1)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# define HAVE_UART_CONSOLE 1
#elif defined(CONFIG_USART2_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_USART2)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# define HAVE_UART_CONSOLE 1
#elif defined(CONFIG_USART3_SERIAL_CONSOLE) && defined(CONFIG_SAMA5_USART3)
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# define HAVE_CONSOLE 1
# define HAVE_UART_CONSOLE 1
#else
# warning "No valid CONFIG_USARTn_SERIAL_CONSOLE Setting"
# undef CONFIG_SAMA5_DBGU_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART3_SERIAL_CONSOLE
# undef HAVE_CONSOLE
# undef HAVE_UART_CONSOLE
#endif
/* If we are not using the serial driver for the console, then we still must
@ -159,6 +174,15 @@
#ifdef USE_SERIALDRIVER
#undef HAVE_UART_CONSOLE
#undef TTYS1_DEV
#undef TTYS2_DEV
#undef TTYS3_DEV
#undef TTYS4_DEV
#undef TTYS5_DEV
#if defined(HAVE_UART) || defined(HAVE_USART)
/* Which UART/USART with be tty0/console and which tty1? tty2? tty3? tty4? tty5? */
/* First pick the console and ttys0. This could be any of UART0-1, USART0-3 */
@ -588,34 +612,17 @@ static inline void up_serialout(struct up_dev_s *priv, int offset, uint32_t valu
putreg32(value, priv->usartbase + offset);
}
/****************************************************************************
* Name: up_restoreusartint
****************************************************************************/
static inline void up_restoreusartint(struct up_dev_s *priv, uint32_t imr)
{
/* Restore the previous interrupt state */
up_serialout(priv, SAM_UART_IMR_OFFSET, imr);
}
/****************************************************************************
* Name: up_disableallints
****************************************************************************/
static void up_disableallints(struct up_dev_s *priv, uint32_t *imr)
static void up_disableallints(struct up_dev_s *priv)
{
irqstate_t flags;
/* The following must be atomic */
flags = irqsave();
if (imr)
{
/* Return the current interrupt mask */
*imr = up_serialin(priv, SAM_UART_IMR_OFFSET);
}
/* Disable all interrupts */
@ -748,7 +755,7 @@ static void up_shutdown(struct uart_dev_s *dev)
/* Disable all interrupts */
up_disableallints(priv, NULL);
up_disableallints(priv);
}
/****************************************************************************
@ -782,6 +789,7 @@ static int up_attach(struct uart_dev_s *dev)
up_enable_irq(priv->irq);
}
return ret;
}
@ -810,7 +818,7 @@ static void up_detach(struct uart_dev_s *dev)
* interrupt received on the 'irq' It should call uart_transmitchars or
* uart_receivechar to perform the appropriate data transfers. The
* interrupt handling logic must be able to map the 'irq' number into the
* approprite uart_dev_s structure in order to call these functions.
* appropriate uart_dev_s structure in order to call these functions.
*
****************************************************************************/
@ -1081,7 +1089,7 @@ static void up_txint(struct uart_dev_s *dev, bool enable)
* Name: up_txready
*
* Description:
* Return true if the tranmsit holding register is empty (TXRDY)
* Return true if the transmit holding register is empty (TXRDY)
*
****************************************************************************/
@ -1105,6 +1113,8 @@ static bool up_txempty(struct uart_dev_s *dev)
return ((up_serialin(priv, SAM_UART_SR_OFFSET) & UART_INT_TXEMPTY) != 0);
}
#endif /* HAVE_UART || HAVE_USART */
/****************************************************************************
* Public Functions
****************************************************************************/
@ -1127,26 +1137,28 @@ void sam_earlyserialinit(void)
/* Disable all USARTS */
up_disableallints(TTYS0_DEV.priv, NULL);
#ifdef TTYS0_DEV
up_disableallints(TTYS0_DEV.priv);
#endif
#ifdef TTYS1_DEV
up_disableallints(TTYS1_DEV.priv, NULL);
up_disableallints(TTYS1_DEV.priv);
#endif
#ifdef TTYS2_DEV
up_disableallints(TTYS2_DEV.priv, NULL);
up_disableallints(TTYS2_DEV.priv);
#endif
#ifdef TTYS3_DEV
up_disableallints(TTYS3_DEV.priv, NULL);
up_disableallints(TTYS3_DEV.priv);
#endif
#ifdef TTYS4_DEV
up_disableallints(TTYS4_DEV.priv, NULL);
up_disableallints(TTYS4_DEV.priv);
#endif
#ifdef TTYS5_DEV
up_disableallints(TTYS5_DEV.priv, NULL);
up_disableallints(TTYS5_DEV.priv);
#endif
/* Configuration whichever one is the console */
#ifdef HAVE_CONSOLE
#ifdef HAVE_UART_CONSOLE
CONSOLE_DEV.isconsole = true;
up_setup(&CONSOLE_DEV);
#endif
@ -1165,13 +1177,15 @@ void up_serialinit(void)
{
/* Register the console */
#ifdef HAVE_CONSOLE
#ifdef HAVE_UART_CONSOLE
(void)uart_register("/dev/console", &CONSOLE_DEV);
#endif
/* Register all USARTs */
/* Register all UARTs/USARTs */
#ifdef TTYS0_DEV
(void)uart_register("/dev/ttyS0", &TTYS0_DEV);
#endif
#ifdef TTYS1_DEV
(void)uart_register("/dev/ttyS1", &TTYS1_DEV);
#endif
@ -1187,6 +1201,12 @@ void up_serialinit(void)
#ifdef TTYS5_DEV
(void)uart_register("/dev/ttyS5", &TTYS5_DEV);
#endif
/* Register the DBGU as well */
#ifdef CONFIG_SAMA5_DBGU
sam_dbgu_register();
#endif
}
#endif /* USE_SERIALDRIVER */

1
arch/z80/src/z180/Kconfig
View File

@ -236,6 +236,7 @@ endmenu
choice
prompt "Serial console"
default NO_SERIAL_CONSOLE
depends on DEV_CONSOLE
config Z180_UART0_SERIAL_CONSOLE
bool "UART0"

65
configs/sama5d3-xplained/README.txt
View File

@ -483,7 +483,7 @@ Programming U-Boot
- Press the "Send File Name" Browse button
- Choose u-boot.bin binary file and press Open
- Enter the proper address on media in the Address text field:
0x00200000
0x00040000
- Press the "Send File" button
- Close SAM-BA, remove the USB Device cable.
@ -660,10 +660,6 @@ Serial Console
J20 SDA 20 PE19 USART3 TXD3
J20 SCL 21 PE18 USART3 RXD3
By default USART1 is used as the NuttX serial console in all
configurations (unless otherwise noted). USART1 is provided at TTL
levels at pins TXD0 and TXD1 of J20.
DBGU Interface
--------------
@ -679,7 +675,10 @@ Serial Console
5 PE14 (available)
6 GND
The DBGU is not used by NuttX.
By default the DBUG is used as the NuttX serial console in all
configurations (unless otherwise noted). The DBGU is available at
logic levels at pins RXD and TXD of the DEBUG connector (J23). GND
is available at J23 and +3.3V is available from J14
Networking
==========
@ -855,15 +854,21 @@ AT25 Serial FLASH
Connections
-----------
Both the SAMA5D3-Xplained board supports an options Serial DataFlash. The
SPI connection is as follows:
The SAMA5D3-Xplained board supports an options Serial DataFlash connected
at MN8. The SPI connection is as follows:
AT25DF321A SAMA5
--------------- -----------------------------------------------
SI PD11 SPI0_MOSI
SO PD10 SPI0_MIS0
SCK PD12 SPI0_SPCK
/CS PD13 if jumper JP6 is closed.
MN8 SAMA5
------------- -----------------------------------------------
PIN FUNCTION PIO FUNCTION
--- --------- ----- -----------------------------------------
5 SI PD11 SPI0_MOSI
2 SO PD10 SPI0_MIS0
6 SCK PD12 SPI0_SPCK
1 /CS PD13 if jumper JP6 is closed.
NOTE: The MN8 is not populated on my SAMAD3 Xplained board. So, as a
result, these instructions would only apply if you were to have an AT25
Serial DataFlash installed in MN8.
Configuration
-------------
@ -897,7 +902,7 @@ AT25 Serial FLASH
CONFIG_SAMA5D3XPLAINED_AT25_AUTOMOUNT=y : Mounts AT25 for NSH
CONFIG_SAMA5D3XPLAINED_AT25_FTL=y : Create block driver for FAT
NOTE that you must close JP6 in order to enable the AT25 FLASH chip select.
NOTE: that you must close JP6 in order to enable the AT25 FLASH chip select.
You can then format the AT25 FLASH for a FAT file system and mount the
file system at /mnt/at25 using these NSH commands:
@ -914,9 +919,6 @@ AT25 Serial FLASH
nsh> cat /mnt/at25/atest.txt
This is a test
NOTE: It appears that if Linux runs out of NAND, it will destroy the
contents of the AT25.
HSMCI Card Slots
================
@ -2391,10 +2393,10 @@ SAMA5D3-Xplained Configuration Options
Individual subsystems can be enabled:
CONFIG_SAMA5_DBGU - Debug Unit Interrupt
CONFIG_SAMA5_PIT - Periodic Interval Timer Interrupt
CONFIG_SAMA5_WDT - Watchdog timer Interrupt
CONFIG_SAMA5_HSMC - Multi-bit ECC Interrupt
CONFIG_SAMA5_DBGU - Debug Unit
CONFIG_SAMA5_PIT - Periodic Interval Timer
CONFIG_SAMA5_WDT - Watchdog timer
CONFIG_SAMA5_HSMC - Multi-bit ECC
CONFIG_SAMA5_SMD - SMD Soft Modem
CONFIG_SAMA5_USART0 - USART 0
CONFIG_SAMA5_USART1 - USART 1
@ -2448,17 +2450,26 @@ SAMA5D3-Xplained Configuration Options
CONFIG_USART2_ISUART - USART2 is configured as a UART
CONFIG_USART3_ISUART - USART3 is configured as a UART
ST91SAMA5 specific device driver settings
AT91SAMA5 specific device driver settings
CONFIG_SAMA5_DBGU_SERIAL_CONSOLE - selects the DBGU
for the console and ttyDBGU
CONFIG_SAMA5_DBGU_RXBUFSIZE - Characters are buffered as received.
This specific the size of the receive buffer
CONFIG_SAMA5_DBGU_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
CONFIG_SAMA5_DBGU_BAUD - The configure BAUD of the DBGU.
CONFIG_SAMA5_DBGU_PARITY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=0,1,2,3) or UART
m (m=4,5) for the console and ttys0 (default is the USART1).
m (m=4,5) for the console and ttys0 (default is the DBGU).
CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received.
This specific the size of the receive buffer
CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be
CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8.
CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_U[S]ARTn_PARITY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_U[S]ARTn_2STOP - Two stop bits
AT91SAMA5 USB Host Configuration
@ -2526,7 +2537,7 @@ Configurations
reconfiguration process.
2. Unless stated otherwise, all configurations generate console
output on USART1 (J20).
output on the DBGU (J23).
3. All of these configurations use the Code Sourcery for Windows toolchain
(unless stated otherwise in the description of the configuration). That
@ -2586,7 +2597,7 @@ Configurations
together.
NOTES:
1. This configuration uses the default USART1 serial console. That
1. This configuration uses the default DBGU serial console. That
is easily changed by reconfiguring to (1) enable a different
serial peripheral, and (2) selecting that serial peripheral as
the console device.

123
configs/sama5d3-xplained/nsh/defconfig
View File

@ -139,7 +139,7 @@ CONFIG_ARCH_CHIP_ATSAMA5D36=y
#
# SAMA5 Peripheral Support
#
# CONFIG_SAMA5_DBGU is not set
CONFIG_SAMA5_DBGU=y
# CONFIG_SAMA5_PIT is not set
# CONFIG_SAMA5_WDT is not set
# CONFIG_SAMA5_RTC is not set
@ -148,7 +148,7 @@ CONFIG_SAMA5_HSMC=y
# CONFIG_SAMA5_UART0 is not set
# CONFIG_SAMA5_UART1 is not set
# CONFIG_SAMA5_USART0 is not set
CONFIG_SAMA5_USART1=y
# CONFIG_SAMA5_USART1 is not set
# CONFIG_SAMA5_USART2 is not set
# CONFIG_SAMA5_USART3 is not set
# CONFIG_SAMA5_TWI0 is not set
@ -182,6 +182,15 @@ CONFIG_SAMA5_USART1=y
# CONFIG_SAMA5_MPDDRC is not set
# CONFIG_SAMA5_PIO_IRQ is not set
#
# DBGU Configuration
#
CONFIG_SAMA5_DBGU_CONSOLE=y
CONFIG_SAMA5_DBGU_RXBUFSIZE=256
CONFIG_SAMA5_DBGU_TXBUFSIZE=256
CONFIG_SAMA5_DBGU_BAUD=115200
CONFIG_SAMA5_DBGU_PARITY=0
#
# External Memory Configuration
#
@ -273,29 +282,6 @@ CONFIG_NSH_MMCSDMINOR=0
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
# CONFIG_SYSTEM_TIME64 is not set
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_CPULOAD is not set
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=32
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2014
CONFIG_START_MONTH=7
CONFIG_START_DAY=31
CONFIG_DEV_CONSOLE=y
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
@ -304,6 +290,63 @@ CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_MQUEUE is not set
CONFIG_DISABLE_ENVIRON=y
#
# Clocks and Timers
#
CONFIG_MSEC_PER_TICK=10
# CONFIG_SYSTEM_TIME64 is not set
# CONFIG_CLOCK_MONOTONIC is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2014
CONFIG_START_MONTH=7
CONFIG_START_DAY=31
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=16
CONFIG_PREALLOC_TIMERS=4
#
# Tasks and Scheduling
#
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_RR_INTERVAL=200
CONFIG_TASK_NAME_SIZE=32
CONFIG_MAX_TASK_ARGS=4
CONFIG_MAX_TASKS=16
# CONFIG_SCHED_HAVE_PARENT is not set
CONFIG_SCHED_WAITPID=y
#
# Pthread Options
#
# CONFIG_MUTEX_TYPES is not set
CONFIG_NPTHREAD_KEYS=4
#
# Performance Monitoring
#
# CONFIG_SCHED_CPULOAD is not set
# CONFIG_SCHED_INSTRUMENTATION is not set
#
# Files and I/O
#
CONFIG_DEV_CONSOLE=y
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
# CONFIG_PRIORITY_INHERITANCE is not set
#
# RTOS hooks
#
# CONFIG_BOARD_INITIALIZE is not set
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
#
# Signal Numbers
#
@ -313,19 +356,10 @@ CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
# POSIX Message Queue Options
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=16
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
@ -381,7 +415,7 @@ CONFIG_SERIAL=y
# CONFIG_ARCH_HAVE_SCI0 is not set
# CONFIG_ARCH_HAVE_SCI1 is not set
# CONFIG_ARCH_HAVE_USART0 is not set
CONFIG_ARCH_HAVE_USART1=y
# CONFIG_ARCH_HAVE_USART1 is not set
# CONFIG_ARCH_HAVE_USART2 is not set
# CONFIG_ARCH_HAVE_USART3 is not set
# CONFIG_ARCH_HAVE_USART4 is not set
@ -393,23 +427,10 @@ CONFIG_ARCH_HAVE_USART1=y
#
# USART Configuration
#
CONFIG_USART1_ISUART=y
CONFIG_MCU_SERIAL=y
# CONFIG_MCU_SERIAL is not set
CONFIG_STANDARD_SERIAL=y
CONFIG_USART1_SERIAL_CONSOLE=y
# CONFIG_USART1_SERIAL_CONSOLE is not set
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# USART1 Configuration
#
CONFIG_USART1_RXBUFSIZE=256
CONFIG_USART1_TXBUFSIZE=256
CONFIG_USART1_BAUD=115200
CONFIG_USART1_BITS=8
CONFIG_USART1_PARITY=0
CONFIG_USART1_2STOP=0
# CONFIG_USART1_IFLOWCONTROL is not set
# CONFIG_USART1_OFLOWCONTROL is not set
# CONFIG_SERIAL_IFLOWCONTROL is not set
# CONFIG_SERIAL_OFLOWCONTROL is not set
# CONFIG_USBDEV is not set

25
configs/sama5d3x-ek/README.txt
View File

@ -604,7 +604,7 @@ Programming U-Boot
- Press the "Send File Name" Browse button
- Choose u-boot.bin binary file and press Open
- Enter the proper address on media in the Address text field:
0x00200000
0x00040000
- Press the "Send File" button
- Close SAM-BA, remove the USB Device cable.
@ -2722,10 +2722,10 @@ SAMA5D3x-EK Configuration Options
Individual subsystems can be enabled:
CONFIG_SAMA5_DBGU - Debug Unit Interrupt
CONFIG_SAMA5_PIT - Periodic Interval Timer Interrupt
CONFIG_SAMA5_WDT - Watchdog timer Interrupt
CONFIG_SAMA5_HSMC - Multi-bit ECC Interrupt
CONFIG_SAMA5_DBGU - Debug Unit
CONFIG_SAMA5_PIT - Periodic Interval Timer
CONFIG_SAMA5_WDT - Watchdog timer
CONFIG_SAMA5_HSMC - Multi-bit ECC
CONFIG_SAMA5_SMD - SMD Soft Modem
CONFIG_SAMA5_USART0 - USART 0
CONFIG_SAMA5_USART1 - USART 1
@ -2779,7 +2779,16 @@ SAMA5D3x-EK Configuration Options
CONFIG_USART2_ISUART - USART2 is configured as a UART
CONFIG_USART3_ISUART - USART3 is configured as a UART
ST91SAMA5 specific device driver settings
AT91SAMA5 specific device driver settings
CONFIG_SAMA5_DBGU_SERIAL_CONSOLE - selects the DBGU
for the console and ttyDBGU
CONFIG_SAMA5_DBGU_RXBUFSIZE - Characters are buffered as received.
This specific the size of the receive buffer
CONFIG_SAMA5_DBGU_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
CONFIG_SAMA5_DBGU_BAUD - The configure BAUD of the DBGU.
CONFIG_SAMA5_DBGU_PARITY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=0,1,2,3) or UART
m (m=4,5) for the console and ttys0 (default is the USART1).
@ -2787,9 +2796,9 @@ SAMA5D3x-EK Configuration Options
This specific the size of the receive buffer
CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be
CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART.
CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8.
CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_U[S]ARTn_PARITY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_U[S]ARTn_2STOP - Two stop bits
AT91SAMA5 USB Host Configuration

2
drivers/lcd/Kconfig
View File

@ -9,7 +9,7 @@ config LCD_CONSOLE
bool "LCD console output"
default n
---help---
It is possible to use an LCD to provide console output. This option
It is possible to use an SLCD to provide console output. This option
enables that possibility.
At present, only one architecture supports this option (M16C).

28
drivers/serial/Kconfig
View File

@ -7,6 +7,7 @@ config DEV_LOWCONSOLE
bool "Low-level console support"
default n
depends on ARCH_LOWPUTC
depends on DEV_CONSOLE
---help---
Use the simple, low-level, write-only serial console driver (minimal support)
@ -39,6 +40,7 @@ config 16550_UART0_BAUD
config 16550_UART0_PARITY
int "16550 UART0 parity"
default 0
range 0 2
---help---
16550 UART0 parity. 0=None, 1=Odd, 2=Even. Default: None
@ -103,6 +105,7 @@ config 16550_UART1_BAUD
config 16550_UART1_PARITY
int "16550 UART1 parity"
default 0
range 0 2
---help---
16550 UART1 parity. 0=None, 1=Odd, 2=Even. Default: None
@ -167,6 +170,7 @@ config 16550_UART2_BAUD
config 16550_UART2_PARITY
int "16550 UART2 parity"
default 0
range 0 2
---help---
16550 UART2 parity. 0=None, 1=Odd, 2=Even. Default: None
@ -231,6 +235,7 @@ config 16550_UART3_BAUD
config 16550_UART3_PARITY
int "16550 UART3 parity"
default 0
range 0 2
---help---
16550 UART3 parity. 0=None, 1=Odd, 2=Even. Default: None
@ -277,6 +282,7 @@ endif
choice
prompt "16550 Serial Console"
default 16550_NO_SERIAL_CONSOLE
depends on DEV_CONSOLE
config 16550_UART0_SERIAL_CONSOLE
bool "16550 UART0 serial console"
@ -531,6 +537,7 @@ choice
prompt "Serial console"
depends on MCU_SERIAL
default NO_SERIAL_CONSOLE
depends on DEV_CONSOLE
config UART_SERIAL_CONSOLE
bool "UART"
@ -657,6 +664,7 @@ config UART_BITS
config UART_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -713,6 +721,7 @@ config UART0_BITS
config UART0_PARITY
int "Parity setting"
range 0 2
default 0
---help---
0=no parity, 1=odd parity, 2=even parity
@ -771,6 +780,7 @@ config USART0_BITS
config USART0_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -828,6 +838,7 @@ config UART1_BITS
config UART1_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -885,6 +896,7 @@ config USART1_BITS
config USART1_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -942,6 +954,7 @@ config UART2_BITS
config UART2_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -999,6 +1012,7 @@ config USART2_BITS
config USART2_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1056,6 +1070,7 @@ config UART3_BITS
config UART3_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1113,6 +1128,7 @@ config USART3_BITS
config USART3_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1170,6 +1186,7 @@ config UART4_BITS
config UART4_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1227,6 +1244,7 @@ config USART4_BITS
config USART4_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1284,6 +1302,7 @@ config UART5_BITS
config UART5_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1341,6 +1360,7 @@ config USART5_BITS
config USART5_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1398,6 +1418,7 @@ config USART6_BITS
config USART6_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1455,6 +1476,7 @@ config UART6_BITS
config UART6_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1512,6 +1534,7 @@ config USART7_BITS
config USART7_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1569,6 +1592,7 @@ config UART7_BITS
config UART7_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1626,6 +1650,7 @@ config USART8_BITS
config USART8_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1683,6 +1708,7 @@ config UART8_BITS
config UART8_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1740,6 +1766,7 @@ config SCI0_BITS
config SCI0_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity
@ -1783,6 +1810,7 @@ config SCI1_BITS
config SCI1_PARITY
int "Parity setting"
default 0
range 0 2
---help---
0=no parity, 1=odd parity, 2=even parity

2
drivers/usbdev/Kconfig
View File

@ -191,6 +191,7 @@ if PL2303
config PL2303_CONSOLE
bool "PL2303 console device"
depends on DEV_CONSOLE
default n
---help---
Register the USB device as /dev/console so that is will be used
@ -275,6 +276,7 @@ if CDCACM
config CDCACM_CONSOLE
bool "CDC/ACM console device"
depends on DEV_CONSOLE
default n
---help---
Register the USB device as /dev/console so that is will be used

6
sched/clock_gettime.c
View File

@ -130,12 +130,6 @@ int clock_gettime(clockid_t clock_id, struct timespec *tp)
/* Return the elapsed time in seconds and nanoseconds */
nsecs = (msecs - (secs * MSEC_PER_SEC)) * NSEC_PER_MSEC;
if (nsecs > NSEC_PER_SEC)
{
carry = nsecs / NSEC_PER_SEC;
secs += carry;
nsecs -= (carry * NSEC_PER_SEC);
}
tp->tv_sec = (time_t)secs;
tp->tv_nsec = (long)nsecs;