configs/xtrs/ostest converted to kconfig-frontend and Windows native
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5421 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
cbd96c7485
commit
cc1102757a
@ -548,6 +548,7 @@ config ARCH_BOARD_VSN
|
||||
config ARCH_BOARD_XTRS
|
||||
bool "XTRS TRS80 Model 3 emulation"
|
||||
depends on ARCH_CHIP_Z80
|
||||
select ARCH_HAVE_UART
|
||||
---help---
|
||||
TRS80 Model 3. This port uses a vintage computer based on the Z80.
|
||||
An emulator for this computer is available to run TRS80 programs on a
|
||||
|
||||
@ -52,10 +52,29 @@ Configuring NuttX
|
||||
This configuration performs a simple, minimal OS test using
|
||||
examples/ostest. This can be configurated as follows:
|
||||
|
||||
1) From a POSIX window:
|
||||
cd tools
|
||||
./configure.sh xtrs/ostest
|
||||
cd -
|
||||
. ./setenv.sh
|
||||
./configure.sh z80sim/pashello
|
||||
2) From a CMD.exe window
|
||||
setenv.bat
|
||||
|
||||
The setenv.bat will need to be updated to include the PATH to the XTRS
|
||||
hex2cmd program.
|
||||
|
||||
NOTES:
|
||||
|
||||
1. This configuration uses the mconf-based configuration tool. See the
|
||||
"Reconfiguring" section below for information about changing this
|
||||
configuration.
|
||||
|
||||
2. The default setup for this configuration uses a windows native build.
|
||||
See the section entitled "Reconfiguring for Linux, OSX, or Cygwin"
|
||||
which will give you the steps you would need to do to convert this
|
||||
configuration to build in other, Unix-like environments.
|
||||
|
||||
3. This configuration was last verified sucessfully prior to the
|
||||
the configure to Kconfig/mconf tool using SDCC 2.6.0 built to run
|
||||
natively under Cygwin. The current build requires ca. 3.2.1 SDCC.
|
||||
|
||||
nsh
|
||||
|
||||
@ -118,8 +137,13 @@ by modifying the configuration file as follows:
|
||||
You may need to first manually change the CONFIG_APPS_DIR="..\apps" definition
|
||||
in the .config file because the backslash may upset some Unix-based tools.
|
||||
|
||||
This configuration will require a recent version of SDCC (ca. 3.2.1) for Linux
|
||||
or custom built for Cygwin (see below).
|
||||
|
||||
You cannot use the default setenv.bat in these Unix-like enviroments because
|
||||
that is a Windows batch file. Use configs/z80sim/script/setenv.sh instead.
|
||||
setenv.sh must include the path to the installation location of SDCC (probably
|
||||
/usr/local/bin).
|
||||
|
||||
SDCC
|
||||
^^^^
|
||||
|
||||
@ -1,39 +0,0 @@
|
||||
############################################################################
|
||||
# configs/xtrs/ostest/appconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/ostest
|
||||
|
||||
@ -1,107 +1,146 @@
|
||||
############################################################################
|
||||
# configs/xtrs/ostest/defconfig
|
||||
#
|
||||
# Copyright (C) 2008-2010, 2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
# Build Setup
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
# CONFIG_HOST_LINUX is not set
|
||||
# CONFIG_HOST_OSX is not set
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
CONFIG_WINDOWS_NATIVE=y
|
||||
# CONFIG_WINDOWS_CYGWIN is not set
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
# CONFIG_WINDOWS_MKLINK is not set
|
||||
|
||||
#
|
||||
############################################################################
|
||||
# Build Configuration
|
||||
#
|
||||
# Architecture selection
|
||||
# CONFIG_APPS_DIR="..\apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
CONFIG_ARCH="z80"
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
# CONFIG_INTELHEX_BINARY is not set
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
# CONFIG_RAW_BINARY is not set
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
# CONFIG_ARCH_ARM is not set
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
CONFIG_ARCH_Z80=y
|
||||
CONFIG_ARCH="z80"
|
||||
CONFIG_ARCH_CHIP="z80"
|
||||
CONFIG_BOARD_LOOPSPERMSEC=100
|
||||
CONFIG_ARCH_CHIP_Z80=y
|
||||
CONFIG_ARCH_BOARD="xtrs"
|
||||
CONFIG_ARCH_BOARD_XTRS=y
|
||||
# CONFIG_ARCH_CHIP_Z8F6403 is not set
|
||||
# CONFIG_ARCH_CHIP_Z8F6423 is not set
|
||||
# CONFIG_ARCH_CHIP_EZ80F91 is not set
|
||||
# CONFIG_ARCH_CHIP_EZ80F92 is not set
|
||||
# CONFIG_ARCH_CHIP_EZ80F93 is not set
|
||||
# CONFIG_Z80_TOOLCHAIN_SDCCL is not set
|
||||
CONFIG_Z80_TOOLCHAIN_SDCCW=y
|
||||
CONFIG_LINKER_HOME_AREA=0x5200
|
||||
CONFIG_LINKER_CODE_AREA=0x5300
|
||||
CONFIG_LINKER_DATA_AREA=0x8000
|
||||
CONFIG_LINKER_ROM_AT_0000=y
|
||||
# CONFIG_ARCH_HAVEHEAD is not set
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
# CONFIG_ARCH_IRQPRIO is not set
|
||||
# CONFIG_ARCH_STACKDUMP is not set
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_DRAM_START=
|
||||
CONFIG_DRAM_SIZE=65536
|
||||
|
||||
#
|
||||
# xtrs specific device driver settings
|
||||
# Boot options
|
||||
#
|
||||
CONFIG_UART_RXBUFSIZE=256
|
||||
CONFIG_UART_TXBUFSIZE=256
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# General build options
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_RRLOAD_BINARY=n
|
||||
CONFIG_INTELHEX_BINARY=n
|
||||
CONFIG_RAW_BINARY=n
|
||||
|
||||
CONFIG_LINKER_START_AREA=0x5200
|
||||
CONFIG_LINKER_CODE_AREA=0x5300
|
||||
CONFIG_LINKER_ROM_AT_0000=y
|
||||
CONFIG_ARCH_BOARD_XTRS=y
|
||||
# CONFIG_ARCH_BOARD_Z80SIM is not set
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="xtrs"
|
||||
|
||||
#
|
||||
# General OS setup
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_USER_ENTRYPOINT="ostest_main"
|
||||
CONFIG_DEBUG=n
|
||||
CONFIG_DEBUG_VERBOSE=n
|
||||
CONFIG_DEBUG_SYMBOLS=n
|
||||
CONFIG_MM_REGIONS=1
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=0
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2008
|
||||
CONFIG_START_MONTH=2
|
||||
CONFIG_START_DAY=21
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_HAVE_LOWUARTINIT=n
|
||||
CONFIG_DEV_CONSOLE=n
|
||||
CONFIG_DEV_LOWCONSOLE=n
|
||||
CONFIG_MUTEX_TYPES=n
|
||||
CONFIG_PRIORITY_INHERITANCE=n
|
||||
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||
CONFIG_SEM_NNESTPRIO=0
|
||||
CONFIG_FDCLONE_DISABLE=n
|
||||
CONFIG_FDCLONE_STDIO=n
|
||||
# CONFIG_DEV_CONSOLE is not set
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
|
||||
#
|
||||
# The following can be used to disable categories of
|
||||
# APIs supported by the OS. If the compiler supports
|
||||
# weak functions, then it should not be necessary to
|
||||
# disable functions unless you want to restrict usage
|
||||
# of those APIs.
|
||||
#
|
||||
# There are certain dependency relationships in these
|
||||
# features.
|
||||
#
|
||||
# o mq_notify logic depends on signals to awaken tasks
|
||||
# waiting for queues to become full or empty.
|
||||
# o pthread_condtimedwait() depends on signals to wake
|
||||
# up waiting tasks.
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_SCHED_WAITPID is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="ostest_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
CONFIG_DISABLE_CLOCK=y
|
||||
CONFIG_DISABLE_POSIX_TIMERS=y
|
||||
CONFIG_DISABLE_PTHREAD=y
|
||||
@ -111,28 +150,6 @@ CONFIG_DISABLE_MOUNTPOINT=y
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
CONFIG_DISABLE_POLL=y
|
||||
|
||||
#
|
||||
# Misc libc settings
|
||||
#
|
||||
CONFIG_NOPRINTF_FIELDWIDTH=y
|
||||
|
||||
#
|
||||
# Allow for architecture optimized implementations
|
||||
#
|
||||
# The architecture can provide optimized versions of the
|
||||
# following to improve sysem performance
|
||||
#
|
||||
CONFIG_ARCH_MEMCPY=n
|
||||
CONFIG_ARCH_MEMCMP=n
|
||||
CONFIG_ARCH_MEMMOVE=n
|
||||
CONFIG_ARCH_MEMSET=n
|
||||
CONFIG_ARCH_STRCMP=n
|
||||
CONFIG_ARCH_STRCPY=n
|
||||
CONFIG_ARCH_STRNCPY=n
|
||||
CONFIG_ARCH_STRLEN=n
|
||||
CONFIG_ARCH_STRNLEN=n
|
||||
CONFIG_ARCH_BZERO=n
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
@ -142,71 +159,300 @@ CONFIG_NPTHREAD_KEYS=0
|
||||
CONFIG_NFILE_DESCRIPTORS=0
|
||||
CONFIG_NFILE_STREAMS=0
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_STDIO_BUFFER_SIZE=0
|
||||
CONFIG_NUNGET_CHARS=0
|
||||
CONFIG_PREALLOC_MQ_MSGS=0
|
||||
CONFIG_MQ_MAXMSGSIZE=0
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=0
|
||||
|
||||
#
|
||||
# TCP/IP and UDP support via uIP
|
||||
#
|
||||
CONFIG_NET=n
|
||||
CONFIG_NET_IPv6=n
|
||||
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
CONFIG_NET_BUFSIZE=420
|
||||
CONFIG_NET_TCP=n
|
||||
CONFIG_NET_TCP_CONNS=40
|
||||
CONFIG_NET_MAX_LISTENPORTS=40
|
||||
CONFIG_NET_UDP=n
|
||||
CONFIG_NET_UDP_CHECKSUMS=y
|
||||
#CONFIG_NET_UDP_CONNS=10
|
||||
CONFIG_NET_ICMP=n
|
||||
CONFIG_NET_ICMP_PING=n
|
||||
#CONFIG_NET_PINGADDRCONF=0
|
||||
CONFIG_NET_STATISTICS=y
|
||||
#CONFIG_NET_RECEIVE_WINDOW=
|
||||
#CONFIG_NET_ARPTAB_SIZE=8
|
||||
CONFIG_NET_BROADCAST=n
|
||||
|
||||
#
|
||||
# UIP Network Utilities
|
||||
#
|
||||
CONFIG_NET_DHCP_LIGHT=n
|
||||
CONFIG_NET_RESOLV_ENTRIES=4
|
||||
|
||||
#
|
||||
# Settings for examples/nsh
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
CONFIG_NSH_TELNET=n
|
||||
CONFIG_NSH_IOBUFFER_SIZE=512
|
||||
CONFIG_NSH_CMD_SIZE=40
|
||||
CONFIG_NSH_DHCPC=n
|
||||
CONFIG_NSH_NOMAC=n
|
||||
CONFIG_NSH_IPADDR=0x0a000002
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001
|
||||
CONFIG_NSH_NETMASK=0xffffff00
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_BOOT_RUNFROMFLASH=n
|
||||
CONFIG_BOOT_COPYTORAM=n
|
||||
CONFIG_CUSTOM_STACK=n
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=1024
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=1024
|
||||
CONFIG_HEAP_SIZE=
|
||||
CONFIG_HEAP_BASE=
|
||||
|
||||
#
|
||||
# Maintain legacy build behavior (revisit)
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_I2C is not set
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_LOWLEVEL_CONSOLE is not set
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_UART=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_STANDARD_SERIAL=y
|
||||
CONFIG_UART_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# UART Configuration
|
||||
#
|
||||
CONFIG_UART_RXBUFSIZE=64
|
||||
CONFIG_UART_TXBUFSIZE=64
|
||||
CONFIG_UART_BAUD=115200
|
||||
CONFIG_UART_BITS=8
|
||||
CONFIG_UART_PARITY=0
|
||||
CONFIG_UART_2STOP=0
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
CONFIG_MMCSD=y
|
||||
CONFIG_MMCSD_SPI=y
|
||||
CONFIG_MMCSD_SDIO=y
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=1
|
||||
CONFIG_ARCH_HAVE_HEAP2=y
|
||||
CONFIG_HEAP2_BASE=0x00000000
|
||||
CONFIG_HEAP2_SIZE=0
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=0
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=0
|
||||
# CONFIG_LIBM is not set
|
||||
CONFIG_NOPRINTF_FIELDWIDTH=y
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
# CONFIG_HAVE_CXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Named Applications
|
||||
#
|
||||
# CONFIG_NAMEDAPP is not set
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CDCACM is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_NETTEST is not set
|
||||
# CONFIG_EXAMPLES_NSH is not set
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
CONFIG_EXAMPLES_OSTEST=y
|
||||
# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
|
||||
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||
CONFIG_EXAMPLES_OSTEST_STACKSIZE=1024
|
||||
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=4
|
||||
CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
|
||||
CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POLL is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBMSC is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
# CONFIG_EXAMPLES_WLAN is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_RESOLV is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TELNETD is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# ModBus
|
||||
#
|
||||
|
||||
#
|
||||
# FreeModbus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
# CONFIG_NSH_LIBRARY is not set
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
# CONFIG_SYSTEM_READLINE is not set
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
54
configs/xtrs/ostest/setenv.bat
Normal file
54
configs/xtrs/ostest/setenv.bat
Normal file
@ -0,0 +1,54 @@
|
||||
@echo off
|
||||
|
||||
rem configs/xtrs/ostest/setenv.bat
|
||||
rem
|
||||
rem Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
rem Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
rem
|
||||
rem Redistribution and use in source and binary forms, with or without
|
||||
rem modification, are permitted provided that the following conditions
|
||||
rem are met:
|
||||
rem
|
||||
rem 1. Redistributions of source code must retain the above copyright
|
||||
rem notice, this list of conditions and the following disclaimer.
|
||||
rem 2. Redistributions in binary form must reproduce the above copyright
|
||||
rem notice, this list of conditions and the following disclaimer in
|
||||
rem the documentation and/or other materials provided with the
|
||||
rem distribution.
|
||||
rem 3. Neither the name NuttX nor the names of its contributors may be
|
||||
rem used to endorse or promote products derived from this software
|
||||
rem without specific prior written permission.
|
||||
rem
|
||||
rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
rem POSSIBILITY OF SUCH DAMAGE.
|
||||
|
||||
rem This is the location where I installed in the MinGW compiler. With
|
||||
rem this configuration, it is recommended that you do NOT install the
|
||||
rem MSYS tools; they conflict with the GNUWin32 tools. See
|
||||
rem http://www.mingw.org/ for further info.
|
||||
|
||||
set PATH=C:\MinGW\bin;%PATH%
|
||||
|
||||
rem This is the location where I installed the SDCC toolchain for windows.
|
||||
|
||||
set PATH=C:\Program Files (x86)\SDCC/bin;%PATH%
|
||||
|
||||
rem This is the location where I installed the GNUWin32 tools. See
|
||||
rem http://gnuwin32.sourceforge.net/.
|
||||
|
||||
set PATH=C:\gnuwin32\bin;%PATH%
|
||||
|
||||
rem This is the location where the XTRS hex2cmd program is available
|
||||
rem set PATH=????:%PATH%
|
||||
|
||||
echo %PATH%
|
||||
@ -1,7 +1,7 @@
|
||||
#!/bin/bash
|
||||
# configs/xtrs/ostest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
@ -32,14 +32,41 @@
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z ${PATH_ORIG} ]; then export PATH_ORIG=${PATH}; fi
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
export SDCC_BIN=/usr/local/bin
|
||||
export PATH=${SDCC_BIN}:/sbin:/usr/sbin:${PATH_ORIG}
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
#
|
||||
# This is the normal installation directory for SDCC under Linux, OSX
|
||||
# or Linux:
|
||||
#
|
||||
export TOOLCHAIN_BIN=/usr/local/bin
|
||||
|
||||
#
|
||||
# This is the normal installation directory for SDCC under Windows
|
||||
#
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/SDCC/bin"
|
||||
|
||||
#
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
#
|
||||
export PATH="${TOOLCHAIN_BIN}":/sbin:/usr/sbin:${PATH_ORIG}
|
||||
|
||||
#
|
||||
# This is the location where the XTRS hex2cmd program is available
|
||||
#
|
||||
# export HEX2CMD_BIN=????
|
||||
# export PATH="${HEX2CMD_BIN}":${PATH}
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@ -53,7 +53,7 @@
|
||||
|
||||
/* Includes trs80-m3.h for assembler call addresses */
|
||||
|
||||
#include <board/board.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
/********************************************************************************
|
||||
* Definitions
|
||||
@ -81,13 +81,13 @@
|
||||
|
||||
void z80_lowputc(char ch) __naked
|
||||
{
|
||||
_asm
|
||||
ld hl, #2
|
||||
add hl, sp
|
||||
ld a, (hl)
|
||||
call _TRS80_M3_VDCHAR ;0x0033
|
||||
__asm
|
||||
ld hl, #2
|
||||
add hl, sp
|
||||
ld a, (hl)
|
||||
call _TRS80_M3_VDCHAR ;0x0033
|
||||
ret
|
||||
_endasm;
|
||||
__endasm;
|
||||
}
|
||||
|
||||
/********************************************************************************
|
||||
@ -96,10 +96,10 @@ void z80_lowputc(char ch) __naked
|
||||
|
||||
char z80_lowgetc(void) __naked
|
||||
{
|
||||
_asm
|
||||
call _TRS80_M3_KBDSCN ;0x002b
|
||||
ld l, a
|
||||
ld h, #0
|
||||
__asm
|
||||
call _TRS80_M3_KBDSCN ;0x002b
|
||||
ld l, a
|
||||
ld h, #0
|
||||
ret
|
||||
_endasm;
|
||||
__endasm;
|
||||
}
|
||||
|
||||
@ -1,7 +1,7 @@
|
||||
;**************************************************************************
|
||||
; configs/xtrs/src/xtrs_head.asm
|
||||
;
|
||||
; Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
|
||||
; Copyright (C) 2008-2009, 2012 Gregory Nutt. All rights reserved.
|
||||
; Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
;
|
||||
; Redistribution and use in source and binary forms, with or without
|
||||
@ -42,15 +42,15 @@
|
||||
|
||||
; Register save area layout
|
||||
|
||||
XCPT_I == 0 ; Offset 0: Saved I w/interrupt state in parity
|
||||
XCPT_BC == 2 ; Offset 1: Saved BC register
|
||||
XCPT_DE == 4 ; Offset 2: Saved DE register
|
||||
XCPT_IX == 6 ; Offset 3: Saved IX register
|
||||
XCPT_IY == 8 ; Offset 4: Saved IY register
|
||||
XCPT_SP == 10 ; Offset 5: Offset to SP at time of interrupt
|
||||
XCPT_HL == 12 ; Offset 6: Saved HL register
|
||||
XCPT_AF == 14 ; Offset 7: Saved AF register
|
||||
XCPT_PC == 16 ; Offset 8: Offset to PC at time of interrupt
|
||||
XCPT_I == 0 ; Offset 0: Saved I w/interrupt state in parity
|
||||
XCPT_BC == 2 ; Offset 1: Saved BC register
|
||||
XCPT_DE == 4 ; Offset 2: Saved DE register
|
||||
XCPT_IX == 6 ; Offset 3: Saved IX register
|
||||
XCPT_IY == 8 ; Offset 4: Saved IY register
|
||||
XCPT_SP == 10 ; Offset 5: Offset to SP at time of interrupt
|
||||
XCPT_HL == 12 ; Offset 6: Saved HL register
|
||||
XCPT_AF == 14 ; Offset 7: Saved AF register
|
||||
XCPT_PC == 16 ; Offset 8: Offset to PC at time of interrupt
|
||||
|
||||
; Default stack base (needs to be fixed)
|
||||
|
||||
@ -60,8 +60,8 @@
|
||||
; Global symbols used
|
||||
;**************************************************************************
|
||||
|
||||
.globl _os_start ; OS entry point
|
||||
.globl _up_doirq ; Interrupt decoding logic
|
||||
.globl _os_start ; OS entry point
|
||||
.globl _up_doirq ; Interrupt decoding logic
|
||||
|
||||
;**************************************************************************
|
||||
; System start logic
|
||||
@ -71,39 +71,39 @@ _up_reset:
|
||||
; Set up the stack pointer at the location determined the Makefile
|
||||
; and stored in asm_mem.h
|
||||
|
||||
ld SP, #CONFIG_STACK_END ; Set stack pointer
|
||||
ld SP, #CONFIG_STACK_END ; Set stack pointer
|
||||
|
||||
; Performed initialization unique to the SDCC toolchain
|
||||
|
||||
call gsinit ; Initialize the data section
|
||||
call gsinit ; Initialize the data section
|
||||
|
||||
; Copy the reset vectors
|
||||
|
||||
ld hl, #_up_rstvectors ; code for RAM
|
||||
ld de, #0x4000 ; move it here
|
||||
ld bc, #3*7 ; 7 vectors / 3 bytes each
|
||||
ld hl, #_up_rstvectors ; code for RAM
|
||||
ld de, #0x4000 ; move it here
|
||||
ld bc, #3*7 ; 7 vectors / 3 bytes each
|
||||
ldir
|
||||
|
||||
; Then start NuttX
|
||||
|
||||
call _os_start ; jump to the OS entry point
|
||||
call _os_start ; jump to the OS entry point
|
||||
|
||||
; NuttX will never return, but just in case...
|
||||
|
||||
_up_halt::
|
||||
halt ; We should never get here
|
||||
jp _up_halt
|
||||
halt ; We should never get here
|
||||
jp _up_halt
|
||||
|
||||
; Data to copy to address 0x4000
|
||||
|
||||
_up_rstvectors:
|
||||
jp _up_rst1 ; 0x4000 : RST 1
|
||||
jp _up_rst2 ; 0x4003 : RST 2
|
||||
jp _up_rst3 ; 0x4006 : RST 3
|
||||
jp _up_rst4 ; 0x4009 : RST 4
|
||||
jp _up_rst5 ; 0x400c : RST 5
|
||||
jp _up_rst6 ; 0x400f : RST 6
|
||||
jp _up_rst7 ; 0x4012 : RST 7
|
||||
jp _up_rst1 ; 0x4000 : RST 1
|
||||
jp _up_rst2 ; 0x4003 : RST 2
|
||||
jp _up_rst3 ; 0x4006 : RST 3
|
||||
jp _up_rst4 ; 0x4009 : RST 4
|
||||
jp _up_rst5 ; 0x400c : RST 5
|
||||
jp _up_rst6 ; 0x400f : RST 6
|
||||
jp _up_rst7 ; 0x4012 : RST 7
|
||||
|
||||
;**************************************************************************
|
||||
; Other reset handlers
|
||||
@ -119,61 +119,61 @@ _up_rstvectors:
|
||||
;
|
||||
;**************************************************************************
|
||||
|
||||
_up_rst1: ; RST 1
|
||||
_up_rst1: ; RST 1
|
||||
; Save AF on the stack, set the interrupt number and jump to the
|
||||
; common reset handling logic.
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #1 ; 1 = Z80_RST1
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #1 ; 1 = Z80_RST1
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
|
||||
_up_rst2: ; RST 2
|
||||
_up_rst2: ; RST 2
|
||||
; Save AF on the stack, set the interrupt number and jump to the
|
||||
; common reset handling logic.
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #2 ; 2 = Z80_RST2
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #2 ; 2 = Z80_RST2
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
|
||||
_up_rst3: ; RST 3
|
||||
_up_rst3: ; RST 3
|
||||
; Save AF on the stack, set the interrupt number and jump to the
|
||||
; common reset handling logic.
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #3 ; 1 = Z80_RST3
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #3 ; 1 = Z80_RST3
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
|
||||
_up_rst4: ; RST 4
|
||||
_up_rst4: ; RST 4
|
||||
; Save AF on the stack, set the interrupt number and jump to the
|
||||
; common reset handling logic.
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #4 ; 1 = Z80_RST4
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #4 ; 1 = Z80_RST4
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
|
||||
_up_rst5: ; RST 5
|
||||
_up_rst5: ; RST 5
|
||||
; Save AF on the stack, set the interrupt number and jump to the
|
||||
; common reset handling logic.
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #5 ; 1 = Z80_RST5
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #5 ; 1 = Z80_RST5
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
|
||||
_up_rst6: ; RST 6
|
||||
_up_rst6: ; RST 6
|
||||
; Save AF on the stack, set the interrupt number and jump to the
|
||||
; common reset handling logic.
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #6 ; 1 = Z80_RST6
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #6 ; 1 = Z80_RST6
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
|
||||
_up_rst7: ; RST 7
|
||||
_up_rst7: ; RST 7
|
||||
; Save AF on the stack, set the interrupt number and jump to the
|
||||
; common reset handling logic.
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #7 ; 7 = Z80_RST7
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
; Offset 8: Return PC is already on the stack
|
||||
push af ; Offset 7: AF (retaining flags)
|
||||
ld a, #7 ; 7 = Z80_RST7
|
||||
jr _up_rstcommon ; Remaining RST handling is common
|
||||
|
||||
;**************************************************************************
|
||||
; Common Interrupt handler
|
||||
@ -188,27 +188,27 @@ _up_rstcommon:
|
||||
;
|
||||
; IRQ number is in A
|
||||
|
||||
push hl ; Offset 6: HL
|
||||
ld hl, #(3*2) ; HL is the value of the stack pointer before
|
||||
add hl, sp ; the interrupt occurred
|
||||
push hl ; Offset 5: Stack pointer
|
||||
push iy ; Offset 4: IY
|
||||
push ix ; Offset 3: IX
|
||||
push de ; Offset 2: DE
|
||||
push bc ; Offset 1: BC
|
||||
push hl ; Offset 6: HL
|
||||
ld hl, #(3*2) ; HL is the value of the stack pointer before
|
||||
add hl, sp ; the interrupt occurred
|
||||
push hl ; Offset 5: Stack pointer
|
||||
push iy ; Offset 4: IY
|
||||
push ix ; Offset 3: IX
|
||||
push de ; Offset 2: DE
|
||||
push bc ; Offset 1: BC
|
||||
|
||||
ld b, a ; Save the reset number in B
|
||||
ld a, i ; Parity bit holds interrupt state
|
||||
push af ; Offset 0: I with interrupt state in parity
|
||||
ld b, a ; Save the reset number in B
|
||||
ld a, i ; Parity bit holds interrupt state
|
||||
push af ; Offset 0: I with interrupt state in parity
|
||||
di
|
||||
|
||||
; Call the interrupt decode logic. SP points to the beggining of the reg structure
|
||||
|
||||
ld hl, #0 ; Argument #2 is the beginning of the reg structure
|
||||
add hl, sp ;
|
||||
push hl ; Place argument #2 at the top of stack
|
||||
push bc ; Argument #1 is the Reset number
|
||||
inc sp ; (make byte sized)
|
||||
ld hl, #0 ; Argument #2 is the beginning of the reg structure
|
||||
add hl, sp ;
|
||||
push hl ; Place argument #2 at the top of stack
|
||||
push bc ; Argument #1 is the Reset number
|
||||
inc sp ; (make byte sized)
|
||||
call _up_doirq ; Decode the IRQ
|
||||
|
||||
; On return, HL points to the beginning of the reg structure to restore
|
||||
@ -216,61 +216,81 @@ _up_rstcommon:
|
||||
; original stack pointer is lost. In the normal case (no context switch),
|
||||
; HL will contain the value of the SP before the arguments wer pushed.
|
||||
|
||||
ld sp, hl ; Use the new stack pointer
|
||||
ld sp, hl ; Use the new stack pointer
|
||||
|
||||
; Restore registers. HL points to the beginning of the reg structure to restore
|
||||
|
||||
ex af, af' ; Select alternate AF
|
||||
pop af ; Offset 0: AF' = I with interrupt state in parity
|
||||
ex af, af' ; Restore original AF
|
||||
pop bc ; Offset 1: BC
|
||||
pop de ; Offset 2: DE
|
||||
pop ix ; Offset 3: IX
|
||||
pop iy ; Offset 4: IY
|
||||
exx ; Use alternate BC/DE/HL
|
||||
ld hl, #-2 ; Offset of SP to account for ret addr on stack
|
||||
pop de ; Offset 5: HL' = Stack pointer after return
|
||||
add hl, de ; HL = Stack pointer value before return
|
||||
exx ; Restore original BC/DE/HL
|
||||
pop hl ; Offset 6: HL
|
||||
pop af ; Offset 7: AF
|
||||
ex af, af' ; Select alternate AF
|
||||
pop af ; Offset 0: AF' = I with interrupt state in parity
|
||||
ex af, af' ; Restore original AF
|
||||
pop bc ; Offset 1: BC
|
||||
pop de ; Offset 2: DE
|
||||
pop ix ; Offset 3: IX
|
||||
pop iy ; Offset 4: IY
|
||||
exx ; Use alternate BC/DE/HL
|
||||
ld hl, #-2 ; Offset of SP to account for ret addr on stack
|
||||
pop de ; Offset 5: HL' = Stack pointer after return
|
||||
add hl, de ; HL = Stack pointer value before return
|
||||
exx ; Restore original BC/DE/HL
|
||||
pop hl ; Offset 6: HL
|
||||
pop af ; Offset 7: AF
|
||||
|
||||
; Restore the stack pointer
|
||||
|
||||
exx ; Use alternate BC/DE/HL
|
||||
ld sp, hl ; Set SP = saved stack pointer value before return
|
||||
exx ; Restore original BC/DE/HL
|
||||
exx ; Use alternate BC/DE/HL
|
||||
ld sp, hl ; Set SP = saved stack pointer value before return
|
||||
exx ; Restore original BC/DE/HL
|
||||
|
||||
; Restore interrupt state
|
||||
|
||||
ex af, af' ; Recover interrupt state
|
||||
jp po, nointenable ; Odd parity, IFF2=0, means disabled
|
||||
ex af, af' ; Restore AF (before enabling interrupts)
|
||||
ei ; yes
|
||||
ex af, af' ; Recover interrupt state
|
||||
jp po, nointenable ; Odd parity, IFF2=0, means disabled
|
||||
ex af, af' ; Restore AF (before enabling interrupts)
|
||||
ei ; yes
|
||||
reti
|
||||
nointenable::
|
||||
ex af, af' ; Restore AF
|
||||
ex af, af' ; Restore AF
|
||||
reti
|
||||
|
||||
;**************************************************************************
|
||||
; Ordering of segments for the linker (SDCC only)
|
||||
;**************************************************************************
|
||||
|
||||
.area _HOME
|
||||
.area _CODE
|
||||
.area _GSINIT
|
||||
.area _GSFINAL
|
||||
.area _HOME
|
||||
.area _CODE
|
||||
.area _INITIALIZER
|
||||
.area _GSINIT
|
||||
.area _GSFINAL
|
||||
|
||||
.area _DATA
|
||||
.area _BSS
|
||||
.area _HEAP
|
||||
.area _DATA
|
||||
.area _INITIALIZED
|
||||
.area _BSEG
|
||||
.area _BSS
|
||||
.area _HEAP
|
||||
|
||||
;**************************************************************************
|
||||
; Global data initialization logic (SDCC only)
|
||||
;**************************************************************************
|
||||
|
||||
.area _GSINIT
|
||||
.area _GSINIT
|
||||
gsinit::
|
||||
ld bc, #l__INITIALIZER
|
||||
ld a, b
|
||||
or a, c
|
||||
jr Z, gsinit_next
|
||||
ld de, #s__INITIALIZED
|
||||
ld hl, #s__INITIALIZER
|
||||
ldir
|
||||
gsinit_next:
|
||||
|
||||
.area _GSFINAL
|
||||
ret
|
||||
|
||||
;**************************************************************************
|
||||
; The start of the heap (SDCC only). Note that is actually resides in
|
||||
; the _CODE area (which may be FLASH or ROM)
|
||||
;**************************************************************************
|
||||
|
||||
.area _CODE
|
||||
_g_heapbase::
|
||||
.dw #s__HEAP
|
||||
|
||||
@ -139,8 +139,13 @@ by modifying the configuration file as follows:
|
||||
You may need to first manually change the CONFIG_APPS_DIR="..\apps" definition
|
||||
in the .config file because the backslash may upset some Unix-based tools.
|
||||
|
||||
This configuration will require a recent version of SDCC (ca. 3.2.1) for Linux
|
||||
or custom built for Cygwin (see below).
|
||||
|
||||
You cannot use the default setenv.bat in these Unix-like enviroments because
|
||||
that is a Windows batch file. Use configs/z80sim/script/setenv.sh instead.
|
||||
setenv.sh must include the path to the installation location of SDCC (probably
|
||||
/usr/local/bin).
|
||||
|
||||
SDCC
|
||||
^^^^
|
||||
|
||||
@ -208,7 +208,7 @@ CONFIG_NO_SERIAL_CONSOLE=y
|
||||
#
|
||||
CONFIG_UART_RXBUFSIZE=64
|
||||
CONFIG_UART_TXBUFSIZE=64
|
||||
CONFIG_UART_BAUD=11520
|
||||
CONFIG_UART_BAUD=115200
|
||||
CONFIG_UART_BITS=8
|
||||
CONFIG_UART_PARITY=0
|
||||
CONFIG_UART_2STOP=0
|
||||
|
||||
@ -207,7 +207,7 @@ CONFIG_UART_SERIAL_CONSOLE=y
|
||||
#
|
||||
CONFIG_UART_RXBUFSIZE=0
|
||||
CONFIG_UART_TXBUFSIZE=0
|
||||
CONFIG_UART_BAUD=11520
|
||||
CONFIG_UART_BAUD=115200
|
||||
CONFIG_UART_BITS=8
|
||||
CONFIG_UART_PARITY=0
|
||||
CONFIG_UART_2STOP=0
|
||||
|
||||
@ -207,7 +207,7 @@ CONFIG_NO_SERIAL_CONSOLE=y
|
||||
#
|
||||
CONFIG_UART_RXBUFSIZE=64
|
||||
CONFIG_UART_TXBUFSIZE=64
|
||||
CONFIG_UART_BAUD=11520
|
||||
CONFIG_UART_BAUD=115200
|
||||
CONFIG_UART_BITS=8
|
||||
CONFIG_UART_PARITY=0
|
||||
CONFIG_UART_2STOP=0
|
||||
|
||||
Loading…
Reference in New Issue
Block a user