Cosmetic changes from review of last PR

This commit is contained in:
Gregory Nutt 2017-09-28 08:30:41 -06:00
parent b55005669a
commit cc6b1275f9
2 changed files with 37 additions and 12 deletions

View File

@ -32,14 +32,22 @@
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __CONFIGS_STM32F4DISCOVERY_SRC_STM32_ROMFS_H
#define __CONFIGS_STM32F4DISCOVERY_SRC_STM32_ROMFS_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifdef CONFIG_STM32_ROMFS
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define ROMFS_SECTOR_SIZE 64
/****************************************************************************
@ -53,8 +61,14 @@
* Registers built-in ROMFS image as block device and mounts it.
*
* Returned Value:
* 0 on success, <0 on error.
* Zero (OK) on success, a negated errno value on error.
*
* Assumptions/Limitations:
* Memory addresses [&romfs_data_begin .. &romfs_data_begin) should contain
* ROMFS volume data, as included in the assembly snippet above (l. 84).
*
****************************************************************************/
int stm32_romfs_initialize(void);
#endif /* CONFIG_STM32_ROMFS */

View File

@ -42,6 +42,7 @@
#include <sys/mount.h>
#include <sys/types.h>
#include <stdint.h>
#include <debug.h>
#include <errno.h>
@ -51,18 +52,21 @@
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef CONFIG_STM32_ROMFS
#error "CONFIG_STM32_ROMFS must be defined"
# error "CONFIG_STM32_ROMFS must be defined"
#else
#ifndef CONFIG_STM32_ROMFS_IMAGEFILE
#error "CONFIG_STM32_ROMFS_IMAGEFILE must be defined"
# error "CONFIG_STM32_ROMFS_IMAGEFILE must be defined"
#endif
#ifndef CONFIG_STM32_ROMFS_DEV_MINOR
#error "CONFIG_STM32_ROMFS_DEV_MINOR must be defined"
# error "CONFIG_STM32_ROMFS_DEV_MINOR must be defined"
#endif
#ifndef CONFIG_STM32_ROMFS_MOUNTPOINT
#error "CONFIG_STM32_ROMFS_MOUNTPOINT must be defined"
# error "CONFIG_STM32_ROMFS_MOUNTPOINT must be defined"
#endif
#define NSECTORS(size) (((size) + ROMFS_SECTOR_SIZE - 1)/ROMFS_SECTOR_SIZE)
@ -76,6 +80,7 @@
/****************************************************************************
* Private Data
****************************************************************************/
__asm__ (
".section .rodata\n"
".balign 16\n"
@ -92,7 +97,7 @@ __asm__ (
extern const char romfs_data_begin;
extern const char romfs_data_end;
extern const int romfs_data_size;
extern const int romfs_data_size;
/****************************************************************************
* Public Functions
@ -106,30 +111,35 @@ extern const int romfs_data_size;
* Then mounts the block device as ROMFS filesystems.
*
* Returned Value:
* 0 on success, <0 on error.
* Zero (OK) on success, a negated errno value on error.
*
* Assumptions/Limitations:
* Memory addresses [&romfs_data_begin .. &romfs_data_begin) should contain
* ROMFS volume data, as included in the assembly snippet above (l. 84).
*
****************************************************************************/
int stm32_romfs_initialize(void)
{
uintptr_t romfs_data_len
int ret;
/* Create a ROM disk for the /etc filesystem */
long int romfs_data_len = &romfs_data_end - &romfs_data_begin;
romfs_data_len = (uintptr_t)&romfs_data_end - (uintptr_t)&romfs_data_begin;
ret = romdisk_register(CONFIG_STM32_ROMFS_DEV_MINOR, &romfs_data_begin,
NSECTORS(romfs_data_len), ROMFS_SECTOR_SIZE);
if (ret < 0)
{
ferr("ERROR: romdisk_register failed: %d\n", -ret);
return -1;
return ret;
}
/* Mount the file system */
finfo("Mounting ROMFS filesystem at target=%s with source=%s\n",
CONFIG_STM32_ROMFS_MOUNTPOINT, MOUNT_DEVNAME);
CONFIG_STM32_ROMFS_MOUNTPOINT, MOUNT_DEVNAME);
ret = mount(MOUNT_DEVNAME, CONFIG_STM32_ROMFS_MOUNTPOINT,
"romfs", MS_RDONLY, NULL);
@ -137,9 +147,10 @@ int stm32_romfs_initialize(void)
{
ferr("ERROR: mount(%s,%s,romfs) failed: %d\n",
MOUNT_DEVNAME, CONFIG_STM32_ROMFS_MOUNTPOINT, errno);
return -1;
return ret;
}
return 0;
return OK;
}
#endif /* CONFIG_STM32_ROMFS */