SAMA5D4-EK: Add a configuration to load a boot program into AT25 FLASH
This commit is contained in:
Gregory Nutt
parent
a97a79a7f3
commit
cd7b1e00f3
@ -63,10 +63,34 @@ config SAMA5D4EK_DRAM_START
|
|||||||
SAMA5D4EK_DRAM_START is defined, then it will not wait but will,
|
SAMA5D4EK_DRAM_START is defined, then it will not wait but will,
|
||||||
instead, immediately start the program in DRAM.
|
instead, immediately start the program in DRAM.
|
||||||
|
|
||||||
|
config SAMA5D4EK_AT25_MAIN
|
||||||
|
bool "Build at25_main"
|
||||||
|
default n
|
||||||
|
depends on SAMA5_BOOT_ISRAM
|
||||||
|
---help---
|
||||||
|
at25_main is a tiny program that runs in ISRAM. at25_main will
|
||||||
|
enable SDRAM and configure the AT25 Serial FLASH. It will prompt
|
||||||
|
and then load an Intel HEX program into SDRAM over the serial
|
||||||
|
console. If the program is successfully loaded in SDRAM, at25_main
|
||||||
|
will copy the program at the beginning of the AT26 Serial FLASH.
|
||||||
|
If the jumpering is set correctly, the SAMA5D4 RomBOOT loader will
|
||||||
|
then boot the program from the serial FLASH the next time that it
|
||||||
|
reset.
|
||||||
|
|
||||||
|
config SAMA5D4EK_AT25_PROGSIZE
|
||||||
|
int "AT25 partition size"
|
||||||
|
default 131072
|
||||||
|
depends on SAMA5D4EK_AT25_MAIN
|
||||||
|
---help---
|
||||||
|
This is the size of the partition at the beginning to the AT25
|
||||||
|
serial FLASH that will be used to hold the boot program. Since
|
||||||
|
this program must run from SRAM, there would be no purpose int
|
||||||
|
making this size any larger than the size of the internal SRAM.
|
||||||
|
|
||||||
config SAMA5D4EK_DRAM_BOOT
|
config SAMA5D4EK_DRAM_BOOT
|
||||||
bool "Using DRAM boot loader"
|
bool "Using DRAM boot loader"
|
||||||
default y
|
default y
|
||||||
depends on SAMA5_BOOT_SDRAM && !SAMA5D4EK_DRAM_MAIN
|
depends on SAMA5_BOOT_SDRAM && !SAMA5D4EK_DRAM_MAIN && !SAMA5D4EK_AT25_MAIN
|
||||||
---help---
|
---help---
|
||||||
Select this option if you are going to boot using the sdram_main
|
Select this option if you are going to boot using the sdram_main
|
||||||
bootloader (created with SAMA5D4EK_DRAM_MAIN=y). This selection
|
bootloader (created with SAMA5D4EK_DRAM_MAIN=y). This selection
|
||||||
@ -115,7 +139,7 @@ endchoice # NAND FLASH configuration
|
|||||||
config SAMA5D4EK_AT25_AUTOMOUNT
|
config SAMA5D4EK_AT25_AUTOMOUNT
|
||||||
bool "AT25 serial FLASH auto-mount"
|
bool "AT25 serial FLASH auto-mount"
|
||||||
default n
|
default n
|
||||||
depends on NSH_ARCHINIT && SAMA5_SPI0 && MTD_AT25
|
depends on (NSH_ARCHINIT || SAMA5D4EK_AT25_MAIN) && SAMA5_SPI0 && MTD_AT25
|
||||||
---help---
|
---help---
|
||||||
Automatically initialize the AT25 SPI FLASH driver when NSH starts.
|
Automatically initialize the AT25 SPI FLASH driver when NSH starts.
|
||||||
|
|
||||||
@ -132,6 +156,14 @@ config SAMA5D4EK_AT25_FTL
|
|||||||
any other file system. Any file system may be used, but there will
|
any other file system. Any file system may be used, but there will
|
||||||
be no wear-leveling.
|
be no wear-leveling.
|
||||||
|
|
||||||
|
config SAMA5D4EK_AT25_CHARDEV
|
||||||
|
bool "Create AT25 Serial FLASH character driver"
|
||||||
|
---help---
|
||||||
|
Create the MTD driver for the AT25 and "wrap" the AT25 as a standard
|
||||||
|
character driver that could then, for example, via simple open, close,
|
||||||
|
read, write file system operations. There will be no wear-leveling
|
||||||
|
in this configuration.
|
||||||
|
|
||||||
config SAMA5D4EK_AT25_NXFFS
|
config SAMA5D4EK_AT25_NXFFS
|
||||||
bool "Create AT25 serial FLASH NXFFS file system"
|
bool "Create AT25 serial FLASH NXFFS file system"
|
||||||
depends on FS_NXFFS
|
depends on FS_NXFFS
|
||||||
|
|||||||
130
configs/sama5d4-ek/at25boot/Make.defs
Normal file
130
configs/sama5d4-ek/at25boot/Make.defs
Normal file
@ -0,0 +1,130 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/sama5d4-ek/at25boot/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
include ${TOPDIR}/tools/Config.mk
|
||||||
|
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
|
||||||
|
LDSCRIPT = isram.ld
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
|
||||||
|
ifeq ($(CONFIG_SAMA5D4EK_DRAM_BOOT),y)
|
||||||
|
LDSCRIPT = dramboot.ld
|
||||||
|
else
|
||||||
|
LDSCRIPT = uboot.ld
|
||||||
|
endif
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native toolchains
|
||||||
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
|
||||||
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
|
||||||
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native toolchain
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||||
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
|
||||||
|
endif
|
||||||
|
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CXX = $(CROSSDEV)g++
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(ARCROSSDEV)ar rcs
|
||||||
|
NM = $(ARCROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||||
|
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-a5 -mfpu=vfpv4-d16
|
||||||
|
ARCHCFLAGS = -fno-builtin
|
||||||
|
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHWARNINGSXX = -Wall -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||||
|
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
ifeq ($(CONFIG_HOST_WINDOWS),y)
|
||||||
|
HOSTEXEEXT = .exe
|
||||||
|
else
|
||||||
|
HOSTEXEEXT =
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native host tools
|
||||||
|
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
|
||||||
|
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
|
||||||
|
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native host tools
|
||||||
|
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
|
||||||
|
endif
|
||||||
|
|
||||||
878
configs/sama5d4-ek/at25boot/defconfig
Normal file
878
configs/sama5d4-ek/at25boot/defconfig
Normal file
@ -0,0 +1,878 @@
|
|||||||
|
#
|
||||||
|
# Automatically generated file; DO NOT EDIT.
|
||||||
|
# Nuttx/ Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Setup
|
||||||
|
#
|
||||||
|
# CONFIG_EXPERIMENTAL is not set
|
||||||
|
# CONFIG_DEFAULT_SMALL is not set
|
||||||
|
# CONFIG_HOST_LINUX is not set
|
||||||
|
# CONFIG_HOST_OSX is not set
|
||||||
|
CONFIG_HOST_WINDOWS=y
|
||||||
|
# CONFIG_HOST_OTHER is not set
|
||||||
|
# CONFIG_WINDOWS_NATIVE is not set
|
||||||
|
CONFIG_WINDOWS_CYGWIN=y
|
||||||
|
# CONFIG_WINDOWS_MSYS is not set
|
||||||
|
# CONFIG_WINDOWS_OTHER is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_APPS_DIR="../apps"
|
||||||
|
# CONFIG_BUILD_2PASS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Output Formats
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY is not set
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
# CONFIG_MOTOROLA_SREC is not set
|
||||||
|
CONFIG_RAW_BINARY=y
|
||||||
|
# CONFIG_UBOOT_UIMAGE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Customize Header Files
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_STDINT_H is not set
|
||||||
|
# CONFIG_ARCH_STDBOOL_H is not set
|
||||||
|
# CONFIG_ARCH_MATH_H is not set
|
||||||
|
# CONFIG_ARCH_FLOAT_H is not set
|
||||||
|
# CONFIG_ARCH_STDARG_H is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Debug Options
|
||||||
|
#
|
||||||
|
# CONFIG_DEBUG is not set
|
||||||
|
CONFIG_ARCH_HAVE_STACKCHECK=y
|
||||||
|
# CONFIG_ARCH_HAVE_HEAPCHECK is not set
|
||||||
|
# CONFIG_DEBUG_SYMBOLS is not set
|
||||||
|
CONFIG_ARCH_HAVE_CUSTOMOPT=y
|
||||||
|
# CONFIG_DEBUG_NOOPT is not set
|
||||||
|
# CONFIG_DEBUG_CUSTOMOPT is not set
|
||||||
|
CONFIG_DEBUG_FULLOPT=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Type
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_8051 is not set
|
||||||
|
CONFIG_ARCH_ARM=y
|
||||||
|
# CONFIG_ARCH_AVR is not set
|
||||||
|
# CONFIG_ARCH_HC is not set
|
||||||
|
# CONFIG_ARCH_MIPS is not set
|
||||||
|
# CONFIG_ARCH_RGMP is not set
|
||||||
|
# CONFIG_ARCH_SH is not set
|
||||||
|
# CONFIG_ARCH_SIM is not set
|
||||||
|
# CONFIG_ARCH_X86 is not set
|
||||||
|
# CONFIG_ARCH_Z16 is not set
|
||||||
|
# CONFIG_ARCH_Z80 is not set
|
||||||
|
CONFIG_ARCH="arm"
|
||||||
|
|
||||||
|
#
|
||||||
|
# ARM Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_CHIP_A1X is not set
|
||||||
|
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||||
|
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_IMX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||||
|
# CONFIG_ARCH_CHIP_KL is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LM is not set
|
||||||
|
# CONFIG_ARCH_CHIP_TIVA is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||||
|
CONFIG_ARCH_CHIP_SAMA5=y
|
||||||
|
# CONFIG_ARCH_CHIP_SAMD is not set
|
||||||
|
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||||
|
# CONFIG_ARCH_ARM7TDMI is not set
|
||||||
|
# CONFIG_ARCH_ARM926EJS is not set
|
||||||
|
# CONFIG_ARCH_ARM920T is not set
|
||||||
|
# CONFIG_ARCH_CORTEXM0 is not set
|
||||||
|
# CONFIG_ARCH_CORTEXM3 is not set
|
||||||
|
# CONFIG_ARCH_CORTEXM4 is not set
|
||||||
|
CONFIG_ARCH_CORTEXA5=y
|
||||||
|
# CONFIG_ARCH_CORTEXA8 is not set
|
||||||
|
CONFIG_ARCH_FAMILY="armv7-a"
|
||||||
|
CONFIG_ARCH_CHIP="sama5"
|
||||||
|
CONFIG_ARCH_HAVE_FPU=y
|
||||||
|
CONFIG_ARCH_FPU=y
|
||||||
|
# CONFIG_ARCH_HAVE_MPU is not set
|
||||||
|
CONFIG_ARCH_HAVE_LOWVECTORS=y
|
||||||
|
CONFIG_ARCH_LOWVECTORS=y
|
||||||
|
# CONFIG_ARCH_ROMPGTABLE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# ARMv7-A Configuration Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set
|
||||||
|
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM is not set
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL is not set
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set
|
||||||
|
# CONFIG_ARMV7A_DECODEFIQ is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SAMA5 Configuration Options
|
||||||
|
#
|
||||||
|
CONFIG_SAMA5_HAVE_AESB=y
|
||||||
|
CONFIG_SAMA5_HAVE_ICM=y
|
||||||
|
CONFIG_SAMA5_HAVE_UART0=y
|
||||||
|
CONFIG_SAMA5_HAVE_UART1=y
|
||||||
|
CONFIG_SAMA5_HAVE_USART4=y
|
||||||
|
# CONFIG_SAMA5_HAVE_CAN0 is not set
|
||||||
|
# CONFIG_SAMA5_HAVE_CAN1 is not set
|
||||||
|
# CONFIG_SAMA5_HAVE_DMA is not set
|
||||||
|
CONFIG_SAMA5_HAVE_DDR32=y
|
||||||
|
CONFIG_SAMA5_HAVE_XDMA=y
|
||||||
|
CONFIG_SAMA5_HAVE_L2CC=y
|
||||||
|
CONFIG_SAMA5_HAVE_LCDC=y
|
||||||
|
# CONFIG_SAMA5_HAVE_GMAC is not set
|
||||||
|
# CONFIG_SAMA5_HAVE_EMACA is not set
|
||||||
|
CONFIG_SAMA5_HAVE_EMACB=y
|
||||||
|
CONFIG_SAMA5_HAVE_EMAC1=y
|
||||||
|
# CONFIG_SAMA5_HAVE_HSMCI2 is not set
|
||||||
|
CONFIG_SAMA5_HAVE_SAIC=y
|
||||||
|
CONFIG_SAMA5_HAVE_SBM=y
|
||||||
|
CONFIG_SAMA5_HAVE_SFC=y
|
||||||
|
CONFIG_SAMA5_HAVE_SPI2=y
|
||||||
|
CONFIG_SAMA5_HAVE_TC1=y
|
||||||
|
CONFIG_SAMA5_HAVE_TC2=y
|
||||||
|
CONFIG_SAMA5_HAVE_TRUSTZONE=y
|
||||||
|
CONFIG_SAMA5_HAVE_TWI3=y
|
||||||
|
CONFIG_SAMA5_HAVE_VDEC=y
|
||||||
|
# CONFIG_ARCH_CHIP_SAMA5D3 is not set
|
||||||
|
CONFIG_ARCH_CHIP_SAMA5D4=y
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D31 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D33 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D34 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D35 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D36 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D41 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D42 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D43 is not set
|
||||||
|
CONFIG_ARCH_CHIP_ATSAMA5D44=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# SAMA5 Peripheral Support
|
||||||
|
#
|
||||||
|
# CONFIG_SAMA5_AES is not set
|
||||||
|
# CONFIG_SAMA5_TDES is not set
|
||||||
|
# CONFIG_SAMA5_AESB is not set
|
||||||
|
# CONFIG_SAMA5_DBGU is not set
|
||||||
|
# CONFIG_SAMA5_L2CC is not set
|
||||||
|
# CONFIG_SAMA5_PIT is not set
|
||||||
|
# CONFIG_SAMA5_WDT is not set
|
||||||
|
# CONFIG_SAMA5_RTC is not set
|
||||||
|
# CONFIG_SAMA5_ICM is not set
|
||||||
|
CONFIG_SAMA5_HSMC=y
|
||||||
|
# CONFIG_SAMA5_SMD is not set
|
||||||
|
# CONFIG_SAMA5_SAIC is not set
|
||||||
|
# CONFIG_SAMA5_UART0 is not set
|
||||||
|
# CONFIG_SAMA5_UART1 is not set
|
||||||
|
# CONFIG_SAMA5_USART0 is not set
|
||||||
|
# CONFIG_SAMA5_USART1 is not set
|
||||||
|
# CONFIG_SAMA5_USART2 is not set
|
||||||
|
CONFIG_SAMA5_USART3=y
|
||||||
|
# CONFIG_SAMA5_USART4 is not set
|
||||||
|
# CONFIG_SAMA5_TWI0 is not set
|
||||||
|
# CONFIG_SAMA5_TWI1 is not set
|
||||||
|
# CONFIG_SAMA5_TWI2 is not set
|
||||||
|
# CONFIG_SAMA5_TWI3 is not set
|
||||||
|
# CONFIG_SAMA5_HSMCI0 is not set
|
||||||
|
# CONFIG_SAMA5_HSMCI1 is not set
|
||||||
|
# CONFIG_SAMA5_SBM is not set
|
||||||
|
# CONFIG_SAMA5_SFC is not set
|
||||||
|
CONFIG_SAMA5_SPI0=y
|
||||||
|
# CONFIG_SAMA5_SPI1 is not set
|
||||||
|
# CONFIG_SAMA5_SPI2 is not set
|
||||||
|
# CONFIG_SAMA5_TC0 is not set
|
||||||
|
# CONFIG_SAMA5_TC1 is not set
|
||||||
|
# CONFIG_SAMA5_TC2 is not set
|
||||||
|
# CONFIG_SAMA5_PWM is not set
|
||||||
|
# CONFIG_SAMA5_ADC is not set
|
||||||
|
# CONFIG_SAMA5_XDMAC0 is not set
|
||||||
|
# CONFIG_SAMA5_XDMAC1 is not set
|
||||||
|
# CONFIG_SAMA5_UHPHS is not set
|
||||||
|
# CONFIG_SAMA5_UDPHS is not set
|
||||||
|
# CONFIG_SAMA5_EMACB is not set
|
||||||
|
# CONFIG_SAMA5_EMAC0 is not set
|
||||||
|
# CONFIG_SAMA5_EMAC1 is not set
|
||||||
|
# CONFIG_SAMA5_LCDC is not set
|
||||||
|
# CONFIG_SAMA5_ISI is not set
|
||||||
|
# CONFIG_SAMA5_SHA is not set
|
||||||
|
# CONFIG_SAMA5_TRNG is not set
|
||||||
|
# CONFIG_SAMA5_ARM is not set
|
||||||
|
# CONFIG_SAMA5_FUSE is not set
|
||||||
|
CONFIG_SAMA5_MPDDRC=y
|
||||||
|
# CONFIG_SAMA5_VDEC is not set
|
||||||
|
# CONFIG_SAMA5_PIO_IRQ is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SPI device driver options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# External Memory Configuration
|
||||||
|
#
|
||||||
|
CONFIG_SAMA5_DDRCS=y
|
||||||
|
CONFIG_SAMA5_DDRCS_SIZE=268435456
|
||||||
|
# CONFIG_SAMA5_DDRCS_LPDDR1 is not set
|
||||||
|
CONFIG_SAMA5_DDRCS_LPDDR2=y
|
||||||
|
# CONFIG_SAMA5_EBICS0 is not set
|
||||||
|
# CONFIG_SAMA5_EBICS1 is not set
|
||||||
|
# CONFIG_SAMA5_EBICS2 is not set
|
||||||
|
# CONFIG_SAMA5_EBICS3 is not set
|
||||||
|
# CONFIG_SAMA5_HAVE_NAND is not set
|
||||||
|
# CONFIG_SAMA5_HAVE_PMECC is not set
|
||||||
|
CONFIG_SAMA5_BOOT_ISRAM=y
|
||||||
|
# CONFIG_SAMA5_BOOT_SDRAM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Heap Configuration
|
||||||
|
#
|
||||||
|
CONFIG_SAMA5_DDRCS_HEAP=y
|
||||||
|
CONFIG_SAMA5_DDRCS_HEAP_OFFSET=0
|
||||||
|
CONFIG_SAMA5_DDRCS_HEAP_SIZE=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_NOINTC is not set
|
||||||
|
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||||
|
# CONFIG_ARCH_DMA is not set
|
||||||
|
CONFIG_ARCH_HAVE_IRQPRIO=y
|
||||||
|
# CONFIG_CUSTOM_STACK is not set
|
||||||
|
# CONFIG_ADDRENV is not set
|
||||||
|
CONFIG_ARCH_HAVE_VFORK=y
|
||||||
|
CONFIG_ARCH_HAVE_MMU=y
|
||||||
|
CONFIG_ARCH_NAND_HWECC=y
|
||||||
|
# CONFIG_ARCH_HAVE_EXTCLK is not set
|
||||||
|
# CONFIG_PAGING is not set
|
||||||
|
# CONFIG_ARCH_IRQPRIO is not set
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
# CONFIG_ENDIAN_BIG is not set
|
||||||
|
# CONFIG_ARCH_IDLE_CUSTOM is not set
|
||||||
|
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||||
|
# CONFIG_ARCH_HAVE_RAMVECTORS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Settings
|
||||||
|
#
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=65775
|
||||||
|
# CONFIG_ARCH_CALIBRATION is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Interrupt options
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||||
|
# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Boot options
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||||
|
# CONFIG_BOOT_RUNFROMFLASH is not set
|
||||||
|
CONFIG_BOOT_RUNFROMISRAM=y
|
||||||
|
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||||
|
# CONFIG_BOOT_COPYTORAM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Boot Memory Configuration
|
||||||
|
#
|
||||||
|
CONFIG_RAM_START=0x00200000
|
||||||
|
CONFIG_RAM_VSTART=0x00200000
|
||||||
|
CONFIG_RAM_SIZE=114688
|
||||||
|
CONFIG_ARCH_HAVE_SDRAM=y
|
||||||
|
CONFIG_BOOT_SDRAM_DATA=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Selection
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_BOARD_SAMA5D4_EK=y
|
||||||
|
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||||
|
CONFIG_ARCH_BOARD="sama5d4-ek"
|
||||||
|
|
||||||
|
#
|
||||||
|
# Common Board Options
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_HAVE_LEDS=y
|
||||||
|
CONFIG_ARCH_LEDS=y
|
||||||
|
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||||
|
# CONFIG_ARCH_BUTTONS is not set
|
||||||
|
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board-Specific Options
|
||||||
|
#
|
||||||
|
# CONFIG_SAMA5D4EK_384MHZ is not set
|
||||||
|
# CONFIG_SAMA5D4EK_396MHZ is not set
|
||||||
|
CONFIG_SAMA5D4EK_528MHZ=y
|
||||||
|
CONFIG_SAMA5D4EK_MT47H128M16RT=y
|
||||||
|
# CONFIG_SAMA5D4EK_MT47H64M16HR is not set
|
||||||
|
# CONFIG_SAMA5D4EK_DRAM_MAIN is not set
|
||||||
|
CONFIG_SAMA5D4EK_AT25_MAIN=y
|
||||||
|
CONFIG_SAMA5D4EK_AT25_PROGSIZE=131072
|
||||||
|
CONFIG_SAMA5D4EK_AT25_AUTOMOUNT=y
|
||||||
|
# CONFIG_SAMA5D4EK_AT25_FTL is not set
|
||||||
|
CONFIG_SAMA5D4EK_AT25_CHARDEV=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# RTOS Features
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_OS_API=y
|
||||||
|
# CONFIG_DISABLE_CLOCK is not set
|
||||||
|
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||||
|
# CONFIG_DISABLE_PTHREAD is not set
|
||||||
|
# CONFIG_DISABLE_SIGNALS is not set
|
||||||
|
# CONFIG_DISABLE_MQUEUE is not set
|
||||||
|
CONFIG_DISABLE_ENVIRON=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Clocks and Timers
|
||||||
|
#
|
||||||
|
CONFIG_MSEC_PER_TICK=10
|
||||||
|
# CONFIG_SYSTEM_TIME64 is not set
|
||||||
|
# CONFIG_CLOCK_MONOTONIC is not set
|
||||||
|
# CONFIG_JULIAN_TIME is not set
|
||||||
|
CONFIG_START_YEAR=2014
|
||||||
|
CONFIG_START_MONTH=7
|
||||||
|
CONFIG_START_DAY=31
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=16
|
||||||
|
CONFIG_PREALLOC_TIMERS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Tasks and Scheduling
|
||||||
|
#
|
||||||
|
CONFIG_USER_ENTRYPOINT="at25_main"
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
CONFIG_TASK_NAME_SIZE=32
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_MAX_TASKS=16
|
||||||
|
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||||
|
CONFIG_SCHED_WAITPID=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Pthread Options
|
||||||
|
#
|
||||||
|
# CONFIG_MUTEX_TYPES is not set
|
||||||
|
CONFIG_NPTHREAD_KEYS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Performance Monitoring
|
||||||
|
#
|
||||||
|
# CONFIG_SCHED_CPULOAD is not set
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Files and I/O
|
||||||
|
#
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
# CONFIG_FDCLONE_DISABLE is not set
|
||||||
|
# CONFIG_FDCLONE_STDIO is not set
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=8
|
||||||
|
CONFIG_NFILE_STREAMS=8
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RTOS hooks
|
||||||
|
#
|
||||||
|
# CONFIG_BOARD_INITIALIZE is not set
|
||||||
|
# CONFIG_SCHED_STARTHOOK is not set
|
||||||
|
# CONFIG_SCHED_ATEXIT is not set
|
||||||
|
# CONFIG_SCHED_ONEXIT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Signal Numbers
|
||||||
|
#
|
||||||
|
CONFIG_SIG_SIGUSR1=1
|
||||||
|
CONFIG_SIG_SIGUSR2=2
|
||||||
|
CONFIG_SIG_SIGALARM=3
|
||||||
|
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||||
|
|
||||||
|
#
|
||||||
|
# POSIX Message Queue Options
|
||||||
|
#
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=4
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=32
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=2048
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||||
|
|
||||||
|
#
|
||||||
|
# Device Drivers
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_POLL=y
|
||||||
|
CONFIG_DEV_NULL=y
|
||||||
|
# CONFIG_DEV_ZERO is not set
|
||||||
|
# CONFIG_LOOP is not set
|
||||||
|
# CONFIG_RAMDISK is not set
|
||||||
|
# CONFIG_CAN is not set
|
||||||
|
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
|
||||||
|
# CONFIG_PWM is not set
|
||||||
|
# CONFIG_ARCH_HAVE_I2CRESET is not set
|
||||||
|
# CONFIG_I2C is not set
|
||||||
|
CONFIG_SPI=y
|
||||||
|
# CONFIG_SPI_OWNBUS is not set
|
||||||
|
CONFIG_SPI_EXCHANGE=y
|
||||||
|
# CONFIG_SPI_CMDDATA is not set
|
||||||
|
# CONFIG_SPI_BITBANG is not set
|
||||||
|
# CONFIG_I2S is not set
|
||||||
|
# CONFIG_RTC is not set
|
||||||
|
# CONFIG_WATCHDOG is not set
|
||||||
|
# CONFIG_TIMER is not set
|
||||||
|
# CONFIG_ANALOG is not set
|
||||||
|
# CONFIG_AUDIO_DEVICES is not set
|
||||||
|
# CONFIG_VIDEO_DEVICES is not set
|
||||||
|
# CONFIG_BCH is not set
|
||||||
|
# CONFIG_INPUT is not set
|
||||||
|
# CONFIG_LCD is not set
|
||||||
|
# CONFIG_MMCSD is not set
|
||||||
|
CONFIG_MTD=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# MTD Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_PARTITION is not set
|
||||||
|
# CONFIG_MTD_SECT512 is not set
|
||||||
|
# CONFIG_MTD_BYTE_WRITE is not set
|
||||||
|
# CONFIG_MTD_CONFIG is not set
|
||||||
|
# CONFIG_MTD_CONFIG_RAM_CONSOLIDATE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# MTD Device Drivers
|
||||||
|
#
|
||||||
|
# CONFIG_MTD_NAND is not set
|
||||||
|
# CONFIG_RAMMTD is not set
|
||||||
|
# CONFIG_MTD_AT24XX is not set
|
||||||
|
CONFIG_MTD_AT25=y
|
||||||
|
CONFIG_AT25_SPIMODE=0
|
||||||
|
CONFIG_AT25_SPIFREQUENCY=20000000
|
||||||
|
# CONFIG_MTD_AT45DB is not set
|
||||||
|
# CONFIG_MTD_M25P is not set
|
||||||
|
# CONFIG_MTD_SMART is not set
|
||||||
|
# CONFIG_MTD_RAMTRON is not set
|
||||||
|
# CONFIG_MTD_SST25 is not set
|
||||||
|
# CONFIG_MTD_SST25XX is not set
|
||||||
|
# CONFIG_MTD_SST39FV is not set
|
||||||
|
# CONFIG_MTD_W25 is not set
|
||||||
|
# CONFIG_PIPES is not set
|
||||||
|
# CONFIG_PM is not set
|
||||||
|
# CONFIG_POWER is not set
|
||||||
|
# CONFIG_SENSORS is not set
|
||||||
|
# CONFIG_SERCOMM_CONSOLE is not set
|
||||||
|
CONFIG_SERIAL=y
|
||||||
|
# CONFIG_DEV_LOWCONSOLE is not set
|
||||||
|
# CONFIG_16550_UART is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART0 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART1 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART2 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART3 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART4 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART5 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART6 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART7 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART8 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_SCI0 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_SCI1 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART0 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART1 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART2 is not set
|
||||||
|
CONFIG_ARCH_HAVE_USART3=y
|
||||||
|
# CONFIG_ARCH_HAVE_USART4 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART5 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART6 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART7 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART8 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USART Configuration
|
||||||
|
#
|
||||||
|
CONFIG_USART3_ISUART=y
|
||||||
|
CONFIG_MCU_SERIAL=y
|
||||||
|
CONFIG_STANDARD_SERIAL=y
|
||||||
|
CONFIG_USART3_SERIAL_CONSOLE=y
|
||||||
|
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USART3 Configuration
|
||||||
|
#
|
||||||
|
CONFIG_USART3_RXBUFSIZE=256
|
||||||
|
CONFIG_USART3_TXBUFSIZE=256
|
||||||
|
CONFIG_USART3_BAUD=115200
|
||||||
|
CONFIG_USART3_BITS=8
|
||||||
|
CONFIG_USART3_PARITY=0
|
||||||
|
CONFIG_USART3_2STOP=0
|
||||||
|
# CONFIG_USART3_IFLOWCONTROL is not set
|
||||||
|
# CONFIG_USART3_OFLOWCONTROL is not set
|
||||||
|
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||||
|
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||||
|
# CONFIG_USBDEV is not set
|
||||||
|
# CONFIG_USBHOST is not set
|
||||||
|
# CONFIG_WIRELESS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging Device Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_RAMLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Support
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_HAVE_NET is not set
|
||||||
|
# CONFIG_ARCH_HAVE_PHY is not set
|
||||||
|
# CONFIG_NET is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# File Systems
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# File system configuration
|
||||||
|
#
|
||||||
|
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||||
|
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
|
||||||
|
CONFIG_FS_READABLE=y
|
||||||
|
CONFIG_FS_WRITABLE=y
|
||||||
|
# CONFIG_FS_RAMMAP is not set
|
||||||
|
CONFIG_FS_FAT=y
|
||||||
|
CONFIG_FAT_LCNAMES=y
|
||||||
|
CONFIG_FAT_LFN=y
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
# CONFIG_FS_FATTIME is not set
|
||||||
|
# CONFIG_FAT_DMAMEMORY is not set
|
||||||
|
# CONFIG_FS_NXFFS is not set
|
||||||
|
# CONFIG_FS_ROMFS is not set
|
||||||
|
# CONFIG_FS_SMARTFS is not set
|
||||||
|
# CONFIG_FS_BINFS is not set
|
||||||
|
# CONFIG_FS_PROCFS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_SYSLOG_ENABLE is not set
|
||||||
|
# CONFIG_SYSLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics Support
|
||||||
|
#
|
||||||
|
# CONFIG_NX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Memory Management
|
||||||
|
#
|
||||||
|
# CONFIG_MM_MULTIHEAP is not set
|
||||||
|
# CONFIG_MM_SMALL is not set
|
||||||
|
CONFIG_MM_REGIONS=1
|
||||||
|
# CONFIG_ARCH_HAVE_HEAP2 is not set
|
||||||
|
# CONFIG_GRAN is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Audio Support
|
||||||
|
#
|
||||||
|
# CONFIG_AUDIO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Formats
|
||||||
|
#
|
||||||
|
# CONFIG_BINFMT_DISABLE is not set
|
||||||
|
# CONFIG_NXFLAT is not set
|
||||||
|
# CONFIG_ELF is not set
|
||||||
|
CONFIG_BUILTIN=y
|
||||||
|
# CONFIG_PIC is not set
|
||||||
|
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Library Routines
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Standard C Library Options
|
||||||
|
#
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=64
|
||||||
|
CONFIG_STDIO_LINEBUFFER=y
|
||||||
|
CONFIG_NUNGET_CHARS=2
|
||||||
|
# CONFIG_LIBM is not set
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||||
|
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||||
|
CONFIG_LIB_RAND_ORDER=1
|
||||||
|
# CONFIG_EOL_IS_CR is not set
|
||||||
|
# CONFIG_EOL_IS_LF is not set
|
||||||
|
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||||
|
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||||
|
# CONFIG_LIBC_EXECFUNCS is not set
|
||||||
|
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||||
|
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||||
|
# CONFIG_LIBC_STRERROR is not set
|
||||||
|
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||||
|
# CONFIG_ARCH_ROMGETC is not set
|
||||||
|
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Non-standard Library Support
|
||||||
|
#
|
||||||
|
# CONFIG_SCHED_WORKQUEUE is not set
|
||||||
|
# CONFIG_LIB_KBDCODEC is not set
|
||||||
|
# CONFIG_LIB_SLCDCODEC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Basic CXX Support
|
||||||
|
#
|
||||||
|
# CONFIG_C99_BOOL8 is not set
|
||||||
|
CONFIG_HAVE_CXX=y
|
||||||
|
CONFIG_HAVE_CXXINITIALIZE=y
|
||||||
|
# CONFIG_CXX_NEWLONG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# uClibc++ Standard C++ Library
|
||||||
|
#
|
||||||
|
# CONFIG_UCLIBCXX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Application Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Built-In Applications
|
||||||
|
#
|
||||||
|
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||||
|
|
||||||
|
#
|
||||||
|
# Examples
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||||
|
# CONFIG_EXAMPLES_CAN is not set
|
||||||
|
# CONFIG_EXAMPLES_CONFIGDATA is not set
|
||||||
|
# CONFIG_EXAMPLES_CPUHOG is not set
|
||||||
|
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_DHCPD is not set
|
||||||
|
# CONFIG_EXAMPLES_ELF is not set
|
||||||
|
# CONFIG_EXAMPLES_FTPC is not set
|
||||||
|
# CONFIG_EXAMPLES_FTPD is not set
|
||||||
|
# CONFIG_EXAMPLES_HELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||||
|
# CONFIG_EXAMPLES_JSON is not set
|
||||||
|
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||||
|
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_IGMP is not set
|
||||||
|
# CONFIG_EXAMPLES_MM is not set
|
||||||
|
# CONFIG_EXAMPLES_MODBUS is not set
|
||||||
|
# CONFIG_EXAMPLES_MOUNT is not set
|
||||||
|
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||||
|
# CONFIG_EXAMPLES_NSH is not set
|
||||||
|
# CONFIG_EXAMPLES_NULL is not set
|
||||||
|
# CONFIG_EXAMPLES_NX is not set
|
||||||
|
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||||
|
# CONFIG_EXAMPLES_NXFFS is not set
|
||||||
|
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||||
|
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||||
|
# CONFIG_EXAMPLES_NXLINES is not set
|
||||||
|
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||||
|
# CONFIG_EXAMPLES_OSTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_PIPE is not set
|
||||||
|
# CONFIG_EXAMPLES_POLL is not set
|
||||||
|
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||||
|
# CONFIG_EXAMPLES_QENCODER is not set
|
||||||
|
# CONFIG_EXAMPLES_RGMP is not set
|
||||||
|
# CONFIG_EXAMPLES_ROMFS is not set
|
||||||
|
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||||
|
# CONFIG_EXAMPLES_SERIALBLASTER is not set
|
||||||
|
# CONFIG_EXAMPLES_SERIALRX is not set
|
||||||
|
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||||
|
# CONFIG_EXAMPLES_SLCD is not set
|
||||||
|
# CONFIG_EXAMPLES_SMART is not set
|
||||||
|
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||||
|
# CONFIG_EXAMPLES_TELNETD is not set
|
||||||
|
# CONFIG_EXAMPLES_THTTPD is not set
|
||||||
|
# CONFIG_EXAMPLES_TIFF is not set
|
||||||
|
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||||
|
# CONFIG_EXAMPLES_UDP is not set
|
||||||
|
# CONFIG_EXAMPLES_UIP is not set
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||||
|
# CONFIG_EXAMPLES_USBTERM is not set
|
||||||
|
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics Support
|
||||||
|
#
|
||||||
|
# CONFIG_TIFF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Interpreters
|
||||||
|
#
|
||||||
|
# CONFIG_INTERPRETERS_FICL is not set
|
||||||
|
# CONFIG_INTERPRETERS_PCODE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Network Utilities
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Utilities
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_CODECS is not set
|
||||||
|
# CONFIG_NETUTILS_DHCPD is not set
|
||||||
|
# CONFIG_NETUTILS_FTPC is not set
|
||||||
|
# CONFIG_NETUTILS_FTPD is not set
|
||||||
|
# CONFIG_NETUTILS_JSON is not set
|
||||||
|
# CONFIG_NETUTILS_SMTP is not set
|
||||||
|
# CONFIG_NETUTILS_TFTPC is not set
|
||||||
|
# CONFIG_NETUTILS_THTTPD is not set
|
||||||
|
# CONFIG_NETUTILS_UIPLIB is not set
|
||||||
|
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FreeModBus
|
||||||
|
#
|
||||||
|
# CONFIG_MODBUS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NSH Library
|
||||||
|
#
|
||||||
|
# CONFIG_NSH_LIBRARY is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NxWidgets/NxWM
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Platform-specific Support
|
||||||
|
#
|
||||||
|
# CONFIG_PLATFORM_CONFIGDATA is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Libraries and NSH Add-Ons
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Custom Free Memory Command
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_FREE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# EMACS-like Command Line Editor
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_CLE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FLASH Program Installation
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_INSTALL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FLASH Erase-all Command
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Intel HEX to binary conversion
|
||||||
|
#
|
||||||
|
CONFIG_SYSTEM_HEX2BIN=y
|
||||||
|
# CONFIG_SYSTEM_HEX2BIN_DEBUG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# I2C tool
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# INI File Parser
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_INIFILE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NxPlayer media player library / command Line
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_NXPLAYER is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAM test
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_RAMTEST is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# readline()
|
||||||
|
#
|
||||||
|
CONFIG_SYSTEM_READLINE=y
|
||||||
|
CONFIG_READLINE_ECHO=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# P-Code Support
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# PHY Tool
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Power Off
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_POWEROFF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAMTRON
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_RAMTRON is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SD Card
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SDCARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sysinfo
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SYSINFO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# VI Work-Alike Editor
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_VI is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack Monitor
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB CDC/ACM Device Commands
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Composite Device Commands
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Mass Storage Device Commands
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Monitor
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Zmodem Commands
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_ZMODEM is not set
|
||||||
76
configs/sama5d4-ek/at25boot/setenv.sh
Executable file
76
configs/sama5d4-ek/at25boot/setenv.sh
Executable file
@ -0,0 +1,76 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/sama5d4-ek/at25boot/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$_" = "$0" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
if [ ! -x "setenv.sh" ]; then
|
||||||
|
echo "This script must be executed from the top-level NuttX build directory"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then
|
||||||
|
export PATH_ORIG="${PATH}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||||
|
# toolchain under Windows. You will also have to edit this if you install
|
||||||
|
# this toolchain in any other location
|
||||||
|
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||||
|
# toolchain under windows. You will also have to edit this if you install
|
||||||
|
# the CodeSourcery toolchain in any other location
|
||||||
|
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||||
|
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||||
|
|
||||||
|
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||||
|
# toolchain under windows. You will also have to edit this if you install
|
||||||
|
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||||
|
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||||
|
# at those locations as well.
|
||||||
|
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||||
|
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I build the buildroot
|
||||||
|
# toolchain.
|
||||||
|
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm/staging_dir/bin"
|
||||||
|
|
||||||
|
# Add the path to the toolchain to the PATH varialble
|
||||||
|
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
274
configs/sama5d4-ek/src/at25_main.c
Normal file
274
configs/sama5d4-ek/src/at25_main.c
Normal file
@ -0,0 +1,274 @@
|
|||||||
|
/*****************************************************************************
|
||||||
|
* configs/sama5d4-ek/src/at25_main.c
|
||||||
|
*
|
||||||
|
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <debug.h>
|
||||||
|
|
||||||
|
#include <arch/irq.h>
|
||||||
|
#include <apps/hex2bin.h>
|
||||||
|
|
||||||
|
#include "sama5d4-ek.h"
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
/* Configuration ************************************************************/
|
||||||
|
|
||||||
|
#ifndef HAVE_AT25
|
||||||
|
# error The AT25 Serial FLASH is not available
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef CONFIG_SAMA5D4EK_NAND_AUTOMOUNT
|
||||||
|
# error CONFIG_SAMA5D4EK_NAND_AUTOMOUNT must be selected
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef CONFIG_SAMA5D4EK_AT25_CHARDEV
|
||||||
|
# error CONFIG_SAMA5D4EK_AT25_CHARDEV must be selected
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef CONFIG_BOOT_SDRAM_DATA
|
||||||
|
# error CONFIG_BOOT_SDRAM_DATA must be selected
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(CONFIG_SAMA5D4EK_AT25_PROGSIZE) || CONFIG_SAMA5D4EK_AT25_PROGSIZE < 128
|
||||||
|
# error Large CONFIG_SAMA5D4EK_AT25_PROGSIZE must be selected
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define DEVNAME_MAXSIZE 12
|
||||||
|
#define IOBUFFER_SIZE 512
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Types
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Data
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
static uint8_t g_heximage[CONFIG_SAMA5D4EK_AT25_PROGSIZE];
|
||||||
|
static uint8_t g_iobuffer[IOBUFFER_SIZE];
|
||||||
|
statid uint8_t g_at25dev[DEVNAME_MAXSIZE];
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: at25_main
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* at25_main is a tiny program that runs in ISRAM. at25_main will
|
||||||
|
* configure DRAM and the AT25 serial FLASH, present a prompt, and load
|
||||||
|
* an Intel HEX file into the AT25 serial FLASH (after first buffering
|
||||||
|
* the binary data into memory). On re-boot, the program loaded into
|
||||||
|
* the AT25 FLASH should then execute.
|
||||||
|
*
|
||||||
|
* On entry:
|
||||||
|
* - SDRAM has already been initialized (we are using it for .bss!)
|
||||||
|
* - SPI0 chip select has already been configured.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
int at25_main(int argc, char *argv)
|
||||||
|
{
|
||||||
|
struct lib_rawinstream_s rawinstream;
|
||||||
|
struct lib_memsostream_s memoutstream;
|
||||||
|
const uint8_t *src;
|
||||||
|
uint8_t *dest;
|
||||||
|
ssize_t nwritten;
|
||||||
|
ssize_t nread;
|
||||||
|
ssize_t remaining;
|
||||||
|
size_t rdsize;
|
||||||
|
int fd;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
/* Configure the AT25 as the a character device. */
|
||||||
|
|
||||||
|
ret = sam_at25_automount(AT25_MINOR);
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
fprintf(stderr, "ERROR: Failed to mount AT25 FLASH: %d\n", ret);
|
||||||
|
return EXIT_FAILURE;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Open the AT25 device for writing */
|
||||||
|
|
||||||
|
snprintf(g_at25dev, DEVNAME_MAXSIZE, "/dev/mtd%d", AT25_MINOR);
|
||||||
|
fd = open(g_at25dev, O_WRONLY);
|
||||||
|
if (fd < 0)
|
||||||
|
{
|
||||||
|
int errcode = errno;
|
||||||
|
fprintf(stderr, "ERROR: Failed to open %s: %d\n", g_at25dev, errcode);
|
||||||
|
return EXIT_FAILURE;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Wrap stdin as an IN stream that can the HEX data over the serial port */
|
||||||
|
|
||||||
|
lib_rawinstream(&rawinstream, 0);
|
||||||
|
|
||||||
|
/* Wrap the memory buffer as a seek-able OUT stream in which we can buffer
|
||||||
|
* the binary data.
|
||||||
|
*/
|
||||||
|
|
||||||
|
lib_memsostream(&memoutstream, (FAR char *)g_heximage,
|
||||||
|
CONFIG_SAMA5D4EK_AT25_PROGSIZE);
|
||||||
|
|
||||||
|
/* We are ready to load the Intel HEX stream into DRAM.
|
||||||
|
*
|
||||||
|
* Hmm.. With no hardware handshake, there is a possibility of data loss
|
||||||
|
* to overrunning incoming data buffer. So far I have not seen this at
|
||||||
|
* 115200 8N1, but still it is a possibility.
|
||||||
|
*/
|
||||||
|
|
||||||
|
printf("Send Intel HEX file now\n");
|
||||||
|
fflush(stdout);
|
||||||
|
|
||||||
|
return hex2bin(&rawinstream.public, &memoutstream.public,
|
||||||
|
(uint32_t)SAM_ISRAM_VSECTION,
|
||||||
|
(uint32_t)(SAM_ISRAM_VSECTION + CONFIG_SAMA5D4EK_AT25_PROGSIZE),
|
||||||
|
0);
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
/* We failed the load */
|
||||||
|
|
||||||
|
fprintf(stderr, "ERROR: Intel HEX file load failed: %d\n", ret);
|
||||||
|
close(fd);
|
||||||
|
return EXIT_FAILURE;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* The HEX file load was successful, write the data to FLASH */
|
||||||
|
|
||||||
|
printf("Successfully loaded the Intel HEX file into memory...\n");
|
||||||
|
printf(" Writing %d bytes to the AT25 Serial FLASH\n",
|
||||||
|
memoutstream.public.nput);
|
||||||
|
|
||||||
|
remaining = memoutstream.public.nput;
|
||||||
|
dest = g_heximage;
|
||||||
|
|
||||||
|
do
|
||||||
|
{
|
||||||
|
nwritten = write(fd, dest, memoutstream.public.nput);
|
||||||
|
if (nwritten <= 0)
|
||||||
|
{
|
||||||
|
int errcode = errno;
|
||||||
|
if (errno != EINTR)
|
||||||
|
{
|
||||||
|
fprintf(stderr, "ERROR: Write failed: %d\n", errcode);
|
||||||
|
close(fd);
|
||||||
|
return EXIT_FAILURE;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
remaining -= nwritten;
|
||||||
|
dest += nwritten;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
while (remaining > 0);
|
||||||
|
|
||||||
|
close(fd);
|
||||||
|
|
||||||
|
/* Now verify that the image in memory and the image in FLASH are truly
|
||||||
|
* the same.
|
||||||
|
*/
|
||||||
|
|
||||||
|
printf(" Verifying %d bytes in the AT25 Serial FLASH\n",
|
||||||
|
memoutstream.public.nput);
|
||||||
|
|
||||||
|
/* Open the AT25 device for writing */
|
||||||
|
|
||||||
|
fd = open(g_at25dev, O_RDONLY);
|
||||||
|
if (fd < 0)
|
||||||
|
{
|
||||||
|
int errcode = errno;
|
||||||
|
fprintf(stderr, "ERROR: Failed to open %s: %d\n", g_at25dev, errcode);
|
||||||
|
return EXIT_FAILURE;
|
||||||
|
}
|
||||||
|
|
||||||
|
remaining = memoutstream.public.nput;
|
||||||
|
src = g_heximage;
|
||||||
|
|
||||||
|
do
|
||||||
|
{
|
||||||
|
rdsize = remaining;
|
||||||
|
if (rdsize > IOBUFFER_SIZE)
|
||||||
|
{
|
||||||
|
rdsize = IOBUFFER_SIZE;
|
||||||
|
}
|
||||||
|
|
||||||
|
nread = read(fd, g_iobuffer, rdsize);
|
||||||
|
if (nread <= 0)
|
||||||
|
{
|
||||||
|
int errcode = errno;
|
||||||
|
if (errno != EINTR)
|
||||||
|
{
|
||||||
|
fprintf(stderr, "ERROR: Read failed: %d\n", errcode);
|
||||||
|
close(fd);
|
||||||
|
return EXIT_FAILURE;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
if (memcmp(g_iobuffer, src, nread) != 0)
|
||||||
|
{
|
||||||
|
fprintf(stderr, "ERROR: Verify failed at offset %d\n",
|
||||||
|
memoutstream.public.nput - remaining);
|
||||||
|
close(fd);
|
||||||
|
return EXIT_FAILURE;
|
||||||
|
}
|
||||||
|
|
||||||
|
remaining -= nwritten;
|
||||||
|
dest += nwritten;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
while (remaining > 0);
|
||||||
|
|
||||||
|
printf(" Successfully verified %d bytes in the AT25 Serial FLASH\n",
|
||||||
|
memoutstream.public.nput);
|
||||||
|
|
||||||
|
close(fd);
|
||||||
|
return EXIT_SUCCESS;
|
||||||
|
}
|
||||||
@ -85,7 +85,7 @@ typedef void (*dram_entry_t)(void);
|
|||||||
*
|
*
|
||||||
* Description:
|
* Description:
|
||||||
* dram_main is a tiny program that runs in ISRAM. dram_main will
|
* dram_main is a tiny program that runs in ISRAM. dram_main will
|
||||||
* configure DRAM, present a prompt, load and Intel HEX file into DRAM,
|
* configure DRAM, present a prompt, load an Intel HEX file into DRAM,
|
||||||
* and either start that program or wait for you to break in with the
|
* and either start that program or wait for you to break in with the
|
||||||
* debugger.
|
* debugger.
|
||||||
*
|
*
|
||||||
@ -105,7 +105,7 @@ int dram_main(int argc, char *argv)
|
|||||||
* Intel HEX stream into DRAM.
|
* Intel HEX stream into DRAM.
|
||||||
*
|
*
|
||||||
* Hmm.. With no hardware handshake, there is a possibility of data loss
|
* Hmm.. With no hardware handshake, there is a possibility of data loss
|
||||||
* to overruning incoming data buffer. So far I have not seen this at
|
* to overrunning incoming data buffer. So far I have not seen this at
|
||||||
* 115200 8N1, but still it is a possibility.
|
* 115200 8N1, but still it is a possibility.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
|||||||
@ -46,6 +46,7 @@
|
|||||||
#include <errno.h>
|
#include <errno.h>
|
||||||
#include <debug.h>
|
#include <debug.h>
|
||||||
|
|
||||||
|
#include <nuttx/fs/fs.h>
|
||||||
#include <nuttx/spi/spi.h>
|
#include <nuttx/spi/spi.h>
|
||||||
#include <nuttx/mtd/mtd.h>
|
#include <nuttx/mtd/mtd.h>
|
||||||
#include <nuttx/fs/nxffs.h>
|
#include <nuttx/fs/nxffs.h>
|
||||||
@ -75,6 +76,10 @@ int sam_at25_automount(int minor)
|
|||||||
{
|
{
|
||||||
FAR struct spi_dev_s *spi;
|
FAR struct spi_dev_s *spi;
|
||||||
FAR struct mtd_dev_s *mtd;
|
FAR struct mtd_dev_s *mtd;
|
||||||
|
#ifdef CONFIG_SAMA5D4EK_AT25_CHARDEV
|
||||||
|
uint8_t blockdev[18];
|
||||||
|
uint8_t chardev[12];
|
||||||
|
#endif
|
||||||
static bool initialized = false;
|
static bool initialized = false;
|
||||||
int ret;
|
int ret;
|
||||||
|
|
||||||
@ -101,15 +106,41 @@ int sam_at25_automount(int minor)
|
|||||||
}
|
}
|
||||||
|
|
||||||
#if defined(CONFIG_SAMA5D4EK_AT25_FTL)
|
#if defined(CONFIG_SAMA5D4EK_AT25_FTL)
|
||||||
/* And finally, use the FTL layer to wrap the MTD driver as a block driver */
|
/* And finally, use the FTL layer to wrap the MTD driver as a block
|
||||||
|
* driver.
|
||||||
|
*/
|
||||||
|
|
||||||
ret = ftl_initialize(AT25_MINOR, mtd);
|
ret = ftl_initialize(minor, mtd);
|
||||||
if (ret < 0)
|
if (ret < 0)
|
||||||
{
|
{
|
||||||
fdbg("ERROR: Failed to initialize the FTL layer: %d\n", ret);
|
fdbg("ERROR: Failed to initialize the FTL layer: %d\n", ret);
|
||||||
return ret;
|
return ret;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#elif defined(CONFIG_SAMA5D4EK_AT25_CHARDEV)
|
||||||
|
/* Use the FTL layer to wrap the MTD driver as a block driver */
|
||||||
|
|
||||||
|
ret = ftl_initialize(minor, mtd);
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
fdbg("ERROR: Failed to initialize the FTL layer: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Use the minor number to create device paths */
|
||||||
|
|
||||||
|
snprintf(blockdev, 18, "/dev/mtdblock%d", minor);
|
||||||
|
snprintf(chardev, 12, "/dev/mtd%d", minor);
|
||||||
|
|
||||||
|
/* Now create a character device on the block device */
|
||||||
|
|
||||||
|
ret = bchdev_register(blockdev, chardev, false);
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
fdbg("ERROR: bchdev_register %s failed: %d\n", chardev, ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
#elif defined(CONFIG_SAMA5D4EK_AT25_NXFFS)
|
#elif defined(CONFIG_SAMA5D4EK_AT25_NXFFS)
|
||||||
/* Initialize to provide NXFFS on the MTD interface */
|
/* Initialize to provide NXFFS on the MTD interface */
|
||||||
|
|
||||||
@ -128,8 +159,10 @@ int sam_at25_automount(int minor)
|
|||||||
fdbg("ERROR: Failed to mount the NXFFS volume: %d\n", errno);
|
fdbg("ERROR: Failed to mount the NXFFS volume: %d\n", errno);
|
||||||
return ret;
|
return ret;
|
||||||
}
|
}
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
/* Now we are initializeed */
|
|
||||||
|
/* Now we are initialized */
|
||||||
|
|
||||||
initialized = true;
|
initialized = true;
|
||||||
}
|
}
|
||||||
|
|||||||
@ -71,7 +71,8 @@ void sam_boardinitialize(void)
|
|||||||
* sam_spiinitialize() has been brought into the link.
|
* sam_spiinitialize() has been brought into the link.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#if defined(CONFIG_SAMA5_SPI0) || defined(CONFIG_SAMA5_SPI1)
|
#if defined(CONFIG_SAMA5_SPI0) || defined(CONFIG_SAMA5_SPI1) || \
|
||||||
|
defined(CONFIG_SAMA5_SPI2)
|
||||||
if (sam_spiinitialize)
|
if (sam_spiinitialize)
|
||||||
{
|
{
|
||||||
sam_spiinitialize();
|
sam_spiinitialize();
|
||||||
|
|||||||
@ -152,16 +152,29 @@
|
|||||||
# undef CONFIG_SAMA5D4EK_AT25_NXFFS
|
# undef CONFIG_SAMA5D4EK_AT25_NXFFS
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if !defined(CONFIG_SAMA5D4EK_AT25_FTL) && !defined(CONFIG_SAMA5D4EK_AT25_NXFFS)
|
#if !defined(CONFIG_SAMA5D4EK_AT25_FTL) && !defined(CONFIG_SAMA5D4EK_AT25_CHARDEV) && \
|
||||||
|
!defined(CONFIG_SAMA5D4EK_AT25_NXFFS)
|
||||||
# undef HAVE_AT25
|
# undef HAVE_AT25
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if defined(CONFIG_SAMA5D4EK_AT25_FTL) && defined(CONFIG_SAMA5D4EK_AT25_CHARDEV)
|
||||||
|
# warning Both CONFIG_SAMA5D4EK_AT25_CHARDEV and CONFIG_SAMA5D4EK_AT25_FTL are set
|
||||||
|
# warning Ignoring CONFIG_SAMA5D4EK_AT25_FTL
|
||||||
|
# undef CONFIG_SAMA5D4EK_AT25_FTL
|
||||||
|
#endif
|
||||||
|
|
||||||
#if defined(CONFIG_SAMA5D4EK_AT25_FTL) && defined(CONFIG_SAMA5D4EK_AT25_NXFFS)
|
#if defined(CONFIG_SAMA5D4EK_AT25_FTL) && defined(CONFIG_SAMA5D4EK_AT25_NXFFS)
|
||||||
# warning Both CONFIG_SAMA5D4EK_AT25_FTL and CONFIG_SAMA5D4EK_AT25_NXFFS are set
|
# warning Both CONFIG_SAMA5D4EK_AT25_FTL and CONFIG_SAMA5D4EK_AT25_NXFFS are set
|
||||||
# warning Ignoring CONFIG_SAMA5D4EK_AT25_NXFFS
|
# warning Ignoring CONFIG_SAMA5D4EK_AT25_NXFFS
|
||||||
# undef CONFIG_SAMA5D4EK_AT25_NXFFS
|
# undef CONFIG_SAMA5D4EK_AT25_NXFFS
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if defined(CONFIG_SAMA5D4EK_AT25_CHARDEV) && defined(CONFIG_SAMA5D4EK_AT25_NXFFS)
|
||||||
|
# warning Both CONFIG_SAMA5D4EK_AT25_CHARDEV and CONFIG_SAMA5D4EK_AT25_NXFFS are set
|
||||||
|
# warning Ignoring CONFIG_SAMA5D4EK_AT25_NXFFS
|
||||||
|
# undef CONFIG_SAMA5D4EK_AT25_NXFFS
|
||||||
|
#endif
|
||||||
|
|
||||||
/* Assign minor device numbers. For example, if we also use MINOR number 0
|
/* Assign minor device numbers. For example, if we also use MINOR number 0
|
||||||
* for the AT25, it should appear as /dev/mtdblock0
|
* for the AT25, it should appear as /dev/mtdblock0
|
||||||
*/
|
*/
|
||||||
@ -509,25 +522,21 @@
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
/* SPI Chip Selects *****************************************************************/
|
/* SPI Chip Selects *****************************************************************/
|
||||||
/* Both the Ronetix and Embest versions of the SAMAD3x CPU modules include an
|
/* The SAMA5D4-EK includes an Atmel AT25DF321A, 32-megabit, 2.7-volt SPI serial
|
||||||
* Atmel AT25DF321A, 32-megabit, 2.7-volt SPI serial flash. The SPI
|
* FLASH on board. The connection is as follows:
|
||||||
* connection is as follows:
|
|
||||||
*
|
*
|
||||||
* AT25DF321A SAMA5
|
* AT25DF321A SAMA5D4-EK SAMA5
|
||||||
* --------------- -----------------------------------------------
|
* ---------- --------------- --------------------------------
|
||||||
* SI PD11 SPI0_MOSI
|
* SI AT25_SPI0_SI PC1 PC1/SPI0_MOSI/PWML2/ISI_D9
|
||||||
* SO PD10 SPI0_MIS0
|
* SO AT25_SPI0_SO PC0 PC0/SPI0_MISO/PWMH2/ISI_D8
|
||||||
* SCK PD12 SPI0_SPCK
|
* SCK AT25_SPI0_SPCK PC2 PC2/SPI0_SPCK/PWMH3/ISI_D10
|
||||||
* /CS PD13 via NL17SZ126 if JP1 is closed (See below)
|
* /CS AT25_SPI0_NCPS0 PC3 PC3/SPI0_NPCS0/PWML3/ISI_D11
|
||||||
*
|
*
|
||||||
* JP1 and JP2 seem to related to /CS on the Ronetix board, but the usage is
|
* AT25_SPI0_NCPS0 goes to the AT25DF321A as via a NL17SZ126 if JP6 is closed
|
||||||
* less clear. For the Embest module, JP1 must be closed to connect /CS to
|
|
||||||
* PD13; on the Ronetix schematic, JP11 seems only to bypass a resistor (may
|
|
||||||
* not be populated?). I think closing JP1 is correct in either case.
|
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#define PIO_AT25_NPCS0 (PIO_OUTPUT | PIO_CFG_PULLUP | PIO_OUTPUT_SET | \
|
#define PIO_AT25_NPCS0 (PIO_OUTPUT | PIO_CFG_PULLUP | PIO_OUTPUT_SET | \
|
||||||
PIO_PORT_PIOD | PIO_PIN13)
|
PIO_PORT_PIOC | PIO_PIN3)
|
||||||
#define AT25_PORT SPI0_CS0
|
#define AT25_PORT SPI0_CS0
|
||||||
|
|
||||||
/************************************************************************************
|
/************************************************************************************
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user