Add UG_2965SWEG01 driver from Darcy Gong; fix logic error in how waiters are reawakened in the USB HID keyboard driver
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5462 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
9c8152f308
commit
cde9146476
@ -3826,4 +3826,10 @@
|
||||
encode special function keys.
|
||||
* configs/olimex-lpc1766stk/hidkbd: This configuration has been
|
||||
converted to use the kconfig-frontends configuration tool.
|
||||
* drivers/lcd/ug-2864hsweg01.c and include/nuttx/lcd/ug-2864hsweg01.h:
|
||||
Driver for UG-2864HSWEG01 OLED contributed by Darcy Gong.
|
||||
* configs/stm32f4discovery/src/up_ug2864hsweg01.c: Support for the
|
||||
UG-2864HSWEG01 OLED for the STM32F4Discovery board.
|
||||
* drivers/usbhost/usbhost_hidkbd.c: Correct a logic error in how
|
||||
tasks waiting for read data are awakened.
|
||||
|
||||
|
||||
@ -100,6 +100,10 @@ ifeq ($(CONFIG_LCD_UG2864AMBAG01),y)
|
||||
CSRCS += up_ug2864ambag01.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_LCD_UG2864HSWEG01),y)
|
||||
CSRCS += up_ug2864hsweg01.c
|
||||
endif
|
||||
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
|
||||
@ -113,7 +113,7 @@
|
||||
# define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTD|GPIO_PIN5)
|
||||
#endif
|
||||
|
||||
/* UG-2864AMBAG01 OLED Display:
|
||||
/* UG-2864AMBAG01 or UG-2864HSWEG01 OLED Display:
|
||||
*
|
||||
* --------------------------+----------------------------------------------
|
||||
* Connector CON10 J1: | STM32F4Discovery
|
||||
@ -135,7 +135,7 @@
|
||||
* -------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_LCD_UG2864AMBAG01
|
||||
#if defined(CONFIG_LCD_UG2864AMBAG01) || defined(CONFIG_LCD_UG2864HSWEG01)
|
||||
# define GPIO_OLED_RESET (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
|
||||
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN6)
|
||||
# define GPIO_OLED_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
|
||||
|
||||
161
configs/stm32f4discovery/src/up_ug2864hsweg01.c
Normal file
161
configs/stm32f4discovery/src/up_ug2864hsweg01.c
Normal file
@ -0,0 +1,161 @@
|
||||
/****************************************************************************
|
||||
* config/stm32f4discovery/src/up_ug2864hsweg01.c
|
||||
* arch/arm/src/board/up_ug2864hsweg01.c
|
||||
*
|
||||
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/spi.h>
|
||||
#include <nuttx/lcd/lcd.h>
|
||||
#include <nuttx/lcd/ug-2864hsweg01.h>
|
||||
|
||||
#include "stm32_gpio.h"
|
||||
#include "stm32f4discovery-internal.h"
|
||||
|
||||
#ifdef CONFIG_LCD_UG2864HSWEG01
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
/* Configuration ************************************************************/
|
||||
/* The pin configurations here require that SPI1 is selected */
|
||||
|
||||
#ifndef CONFIG_STM32_SPI1
|
||||
# error "The OLED driver requires CONFIG_STM32_SPI1 in the configuration"
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_SPI_CMDDATA
|
||||
# error "The OLED driver requires CONFIG_SPI_CMDDATA in the configuration"
|
||||
#endif
|
||||
|
||||
/* Pin Configuration ********************************************************/
|
||||
/* UG-2864AMBAG01 or UG-2864HSWEG01 OLED Display:
|
||||
*
|
||||
* --------------------------+----------------------------------------------
|
||||
* Connector CON10 J1: | STM32F4Discovery
|
||||
* --------------+-----------+----------------------------------------------
|
||||
* CON10 J1: | CON20 J2: | P1/P2:
|
||||
* --------------+-----------+----------------------------------------------
|
||||
* 1 3v3 | 3,4 3v3 | P2 3V
|
||||
* 3 /RESET | 8 /RESET | P2 PB6 (Arbitrary selection)
|
||||
* 5 /CS | 7 /CS | P2 PB7 (Arbitrary selection)(2)
|
||||
* 7 A0 | 9 A0 | P2 PB8 (Arbitrary selection)(2)
|
||||
* 9 LED+ (N/C) | ----- | -----
|
||||
* 2 5V Vcc | 1,2 Vcc | P2 5V
|
||||
* 4 DI | 18 D1/SI | P1 PA7 (GPIO_SPI1_MOSI == GPIO_SPI1_MOSI_1 (1))
|
||||
* 6 SCLK | 19 D0/SCL | P1 PA5 (GPIO_SPI1_SCK == GPIO_SPI1_SCK_1 (2))
|
||||
* 8 LED- (N/C) | ----- | ------
|
||||
* 10 GND | 20 GND | P2 GND
|
||||
* --------------+-----------+----------------------------------------------
|
||||
* (1) Required because of on-board MEMS
|
||||
* (2) Note that the OLED CS and A0 are managed in the up_spi.c file.
|
||||
* -------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/* Definitions in stm32f4discovery-internal.h */
|
||||
|
||||
/* Debug ********************************************************************/
|
||||
|
||||
#ifdef CONFIG_DEBUG_LCD
|
||||
# define lcddbg(format, arg...) dbg(format, ##arg)
|
||||
# define lcdvdbg(format, arg...) vdbg(format, ##arg)
|
||||
#else
|
||||
# define lcddbg(x...)
|
||||
# define lcdvdbg(x...)
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_nxdrvinit
|
||||
*
|
||||
* Description:
|
||||
* Called by NX initialization logic to configure the OLED.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno)
|
||||
{
|
||||
FAR struct spi_dev_s *spi;
|
||||
FAR struct lcd_dev_s *dev;
|
||||
|
||||
/* Configure the OLED GPIOs. This initial configuration is RESET low,
|
||||
* putting the OLED into reset state.
|
||||
*/
|
||||
|
||||
(void)stm32_configgpio(GPIO_OLED_RESET);
|
||||
|
||||
/* Wait a bit then release the OLED from the reset state */
|
||||
|
||||
up_mdelay(20);
|
||||
stm32_gpiowrite(GPIO_OLED_RESET, true);
|
||||
|
||||
/* Get the SPI1 port interface */
|
||||
|
||||
spi = up_spiinitialize(1);
|
||||
if (!spi)
|
||||
{
|
||||
lcddbg("Failed to initialize SPI port 1\n");
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Bind the SPI port to the OLED */
|
||||
|
||||
dev = ug2864hsweg01_initialize(spi, devno);
|
||||
if (!dev)
|
||||
{
|
||||
lcddbg("Failed to bind SPI port 1 to OLED %d: %d\n", devno);
|
||||
}
|
||||
else
|
||||
{
|
||||
lcdvdbg("Bound SPI port 1 to OLED %d\n", devno);
|
||||
|
||||
/* And turn the OLED on */
|
||||
|
||||
(void)dev->setpower(dev, CONFIG_LCD_MAXPOWER);
|
||||
return dev;
|
||||
}
|
||||
}
|
||||
|
||||
return NULL;
|
||||
}
|
||||
#endif /* CONFIG_LCD_UG2864AMBAG01 */
|
||||
@ -51,6 +51,10 @@ ifeq ($(CONFIG_LCD_UG2864AMBAG01),y)
|
||||
CSRCS += ug-2864ambag01.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_LCD_UG2864HSWEG01),y)
|
||||
CSRCS += ug-2864hsweg01.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_LCD_UG9664HSWAG01),y)
|
||||
CSRCS += ug-9664hswag01.c
|
||||
endif
|
||||
|
||||
1177
drivers/lcd/ug-2864hsweg01.c
Normal file
1177
drivers/lcd/ug-2864hsweg01.c
Normal file
File diff suppressed because it is too large
Load Diff
@ -1027,6 +1027,7 @@ static int usbhost_kbdpoll(int argc, char *argv[])
|
||||
/* Loop here until the device is disconnected */
|
||||
|
||||
uvdbg("Entering poll loop\n");
|
||||
|
||||
while (!priv->disconnected)
|
||||
{
|
||||
/* Make sure that we have exclusive access to the private data
|
||||
@ -1169,10 +1170,10 @@ static int usbhost_kbdpoll(int argc, char *argv[])
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Did we just transition from no data available to data available? */
|
||||
/* Is there data available? */
|
||||
|
||||
newstate = (priv->headndx == priv->tailndx);
|
||||
if (empty && !newstate)
|
||||
if (!newstate)
|
||||
{
|
||||
/* Yes.. Is there a thread waiting for keyboard data now? */
|
||||
|
||||
@ -1184,10 +1185,16 @@ static int usbhost_kbdpoll(int argc, char *argv[])
|
||||
priv->waiting = false;
|
||||
}
|
||||
|
||||
/* And wake up any threads waiting for the POLLIN event */
|
||||
/* Did we just transition from no data available to data
|
||||
* available? If so, wake up any threads waiting for the
|
||||
* POLLIN event.
|
||||
*/
|
||||
|
||||
if (empty)
|
||||
{
|
||||
usbhost_pollnotify(priv);
|
||||
}
|
||||
}
|
||||
|
||||
empty = newstate;
|
||||
usbhost_givesem(&priv->exclsem);
|
||||
@ -2146,6 +2153,7 @@ static ssize_t usbhost_read(FAR struct file *filep, FAR char *buffer, size_t len
|
||||
/* Wait for data to be available */
|
||||
|
||||
uvdbg("Waiting...\n");
|
||||
|
||||
priv->waiting = true;
|
||||
usbhost_givesem(&priv->exclsem);
|
||||
usbhost_takesem(&priv->waitsem);
|
||||
|
||||
245
include/nuttx/lcd/ug-2864hsweg01.h
Normal file
245
include/nuttx/lcd/ug-2864hsweg01.h
Normal file
@ -0,0 +1,245 @@
|
||||
/**************************************************************************************
|
||||
* include/nuttx/lcd/ug-2864hsweg01.h
|
||||
* Driver for Univision UG-2864HSWEG01 OLED display (wih SSD1306 controller) in SPI
|
||||
* mode
|
||||
*
|
||||
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* References:
|
||||
* 1. Product Specification (Preliminary), Part Name: OEL Display Module, Part ID:
|
||||
* UG-2864HSWEG01, Doc No: SAS1-9046-B, Univision Technology Inc.
|
||||
* 2. SSD1306, 128 X 64 Dot Matrix OLED/PLED, Preliminary Segment/Common Driver with
|
||||
* Controller, Solomon Systech
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
#ifndef __INCLUDE_NUTTX_UG_8264HSWEG01_H
|
||||
#define __INCLUDE_NUTTX_UG_8264HSWEG01_H
|
||||
|
||||
/**************************************************************************************
|
||||
* Included Files
|
||||
**************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
|
||||
#ifdef CONFIG_LCD_UG2864HSWEG01
|
||||
|
||||
/**************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
**************************************************************************************/
|
||||
/* Configuration **********************************************************************/
|
||||
/* UG-2864HSWEG01 Configuration Settings:
|
||||
*
|
||||
* CONFIG_UG2864HSWEG01_SPIMODE - Controls the SPI mode
|
||||
* CONFIG_UG2864HSWEG01_FREQUENCY - Define to use a different bus frequency
|
||||
* CONFIG_UG2864HSWEG01_NINTERFACES - Specifies the number of physical UG-2864HSWEG01
|
||||
* devices that will be supported.
|
||||
*
|
||||
* Required LCD driver settings:
|
||||
*
|
||||
* CONFIG_LCD_UG28HSWEG01 - Enable UG-2864HSWEG01 support
|
||||
* CONFIG_LCD_MAXCONTRAST should be 255, but any value >0 and <=255 will be accepted.
|
||||
* CONFIG_LCD_MAXPOWER must be 1
|
||||
*
|
||||
* Option LCD driver settings:
|
||||
* CONFIG_LCD_LANDSCAPE, CONFIG_LCD_PORTRAIT, CONFIG_LCD_RLANDSCAPE, and
|
||||
* CONFIG_LCD_RPORTRAIT - Display orientation.
|
||||
*
|
||||
* Required SPI driver settings:
|
||||
* CONFIG_SPI_CMDDATA - Include support for cmd/data selection.
|
||||
*/
|
||||
|
||||
/* SPI Interface
|
||||
*
|
||||
* "The serial interface consists of serial clock SCL, serial data SI, A0 and
|
||||
* CS . SI is shifted into an 8-bit shift register on every rising edge of
|
||||
* SCL in the order of D7, D6, … and D0. A0 is sampled on every eighth clock
|
||||
* and the data byte in the shift register is written to the display data RAM
|
||||
* or command register in the same clock."
|
||||
*
|
||||
* MODE 3:
|
||||
* Clock polarity: High (CPOL=1)
|
||||
* Clock phase: Sample on trailing (rising edge) (CPHA 1)
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_UG2864HSWEG01_SPIMODE
|
||||
# define CONFIG_UG2864HSWEG01_SPIMODE SPIDEV_MODE3
|
||||
#endif
|
||||
|
||||
/* "This module determines whether the input data is interpreted as data or
|
||||
* command. When A0 = “H”, the inputs at D7 - D0 are interpreted as data and be
|
||||
* written to display RAM. When A0 = “L”, the inputs at D7 - D0 are interpreted
|
||||
* as command, they will be decoded and be written to the corresponding command
|
||||
* registers.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_SPI_CMDDATA
|
||||
# error "CONFIG_SPI_CMDDATA must be defined in your NuttX configuration"
|
||||
#endif
|
||||
|
||||
/* CONFIG_UG2864HSWEG01_NINTERFACES determines the number of physical interfaces
|
||||
* that will be supported.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_UG2864HSWEG01_NINTERFACES
|
||||
# define CONFIG_UG2864HSWEG01_NINTERFACES 1
|
||||
#endif
|
||||
|
||||
/* Check contrast selection */
|
||||
|
||||
#if !defined(CONFIG_LCD_MAXCONTRAST)
|
||||
# define CONFIG_LCD_MAXCONTRAST 255
|
||||
#endif
|
||||
|
||||
#if CONFIG_LCD_MAXCONTRAST <= 0|| CONFIG_LCD_MAXCONTRAST > 255
|
||||
# error "CONFIG_LCD_MAXCONTRAST exceeds supported maximum"
|
||||
#endif
|
||||
|
||||
#if CONFIG_LCD_MAXCONTRAST < 255
|
||||
# warning "Optimal setting of CONFIG_LCD_MAXCONTRAST is 255"
|
||||
#endif
|
||||
|
||||
/* Check power setting */
|
||||
|
||||
#if !defined(CONFIG_LCD_MAXPOWER)
|
||||
# define CONFIG_LCD_MAXPOWER 1
|
||||
#endif
|
||||
|
||||
#if CONFIG_LCD_MAXPOWER != 1
|
||||
# warning "CONFIG_LCD_MAXPOWER exceeds supported maximum"
|
||||
# undef CONFIG_LCD_MAXPOWER
|
||||
# define CONFIG_LCD_MAXPOWER 1
|
||||
#endif
|
||||
|
||||
/* Color is 1bpp monochrome with leftmost column contained in bits 0 */
|
||||
|
||||
#ifdef CONFIG_NX_DISABLE_1BPP
|
||||
# warning "1 bit-per-pixel support needed"
|
||||
#endif
|
||||
|
||||
/* Orientation */
|
||||
|
||||
#if defined(CONFIG_LCD_LANDSCAPE)
|
||||
# undef CONFIG_LCD_PORTRAIT
|
||||
# undef CONFIG_LCD_RLANDSCAPE
|
||||
# undef CONFIG_LCD_RPORTRAIT
|
||||
#elif defined(CONFIG_LCD_PORTRAIT)
|
||||
# undef CONFIG_LCD_LANDSCAPE
|
||||
# undef CONFIG_LCD_RLANDSCAPE
|
||||
# undef CONFIG_LCD_RPORTRAIT
|
||||
#elif defined(CONFIG_LCD_RLANDSCAPE)
|
||||
# undef CONFIG_LCD_LANDSCAPE
|
||||
# undef CONFIG_LCD_PORTRAIT
|
||||
# undef CONFIG_LCD_RPORTRAIT
|
||||
#elif defined(CONFIG_LCD_RPORTRAIT)
|
||||
# undef CONFIG_LCD_LANDSCAPE
|
||||
# undef CONFIG_LCD_PORTRAIT
|
||||
# undef CONFIG_LCD_RLANDSCAPE
|
||||
#else
|
||||
# define CONFIG_LCD_LANDSCAPE 1
|
||||
# warning "Assuming landscape orientation"
|
||||
#endif
|
||||
|
||||
/* Some important "colors" */
|
||||
|
||||
#define UG_Y1_BLACK 0
|
||||
#define UG_Y1_WHITE 1
|
||||
|
||||
/**************************************************************************************
|
||||
* Public Types
|
||||
**************************************************************************************/
|
||||
|
||||
/**************************************************************************************
|
||||
* Public Data
|
||||
**************************************************************************************/
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif
|
||||
|
||||
/**************************************************************************************
|
||||
* Public Function Prototypes
|
||||
**************************************************************************************/
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: ug2864hsweg01_initialize
|
||||
*
|
||||
* Description:
|
||||
* Initialize the UG-2864HSWEG01 video hardware. The initial state of the
|
||||
* OLED is fully initialized, display memory cleared, and the OLED ready
|
||||
* to use, but with the power setting at 0 (full off == sleep mode).
|
||||
*
|
||||
* Input Parameters:
|
||||
*
|
||||
* spi - A reference to the SPI driver instance.
|
||||
* devno - A value in the range of 0 through CONFIG_UG2864HSWEG01_NINTERFACES-1.
|
||||
* This allows support for multiple OLED devices.
|
||||
*
|
||||
* Returned Value:
|
||||
*
|
||||
* On success, this function returns a reference to the LCD object for
|
||||
* the specified OLED. NULL is returned on any failure.
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
struct lcd_dev_s; /* See include/nuttx/lcd/lcd.h */
|
||||
struct spi_dev_s; /* See include/nuttx/spi.h */
|
||||
FAR struct lcd_dev_s *ug2864hsweg01_initialize(FAR struct spi_dev_s *spi,
|
||||
unsigned int devno);
|
||||
|
||||
/************************************************************************************************
|
||||
* Name: ug2864hsweg01_fill
|
||||
*
|
||||
* Description:
|
||||
* This non-standard method can be used to clear the entire display by writing one
|
||||
* color to the display. This is much faster than writing a series of runs.
|
||||
*
|
||||
* Input Parameters:
|
||||
* priv - Reference to private driver structure
|
||||
*
|
||||
* Assumptions:
|
||||
* Caller has selected the OLED section.
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
void ug2864hsweg01_fill(FAR struct lcd_dev_s *dev, uint8_t color);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_LCD_UG2864HSWEG01 */
|
||||
#endif /* __INCLUDE_NUTTX_UG_8264HSWEG01_H */
|
||||
Loading…
Reference in New Issue
Block a user