sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add support for the Atollic 'Lite' toolchain in all STM32 F4 configurations

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4417 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-02-23 18:42:36 +00:00
parent 18379c0657
commit d14fbab225
39 changed files with 258 additions and 101 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ChangeLog
View File

@ -2493,3 +2493,5 @@
was ignored because its sequence number looked wrong. Fix was, obviously,
to only increment the recevied sequence number if the TCP data was
accepted.
* configs/stm3240g-eval, configs/stm32f40discovery, and arch/*/src/Makefile:
Add changes to support building with the Atollic "Lite" toolchain.

5
arch/arm/src/Makefile
View File

@ -119,11 +119,6 @@ endif
@$(NM) $(NUTTX)$(EXEEXT) | \
grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > $(TOPDIR)/System.map
@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`; \
if [ ! -z "$$vflashstart" ]; then \
$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
fi
# This is part of the top-level export target

16
arch/arm/src/c5471/c5471_irq.c
View File

@ -1,8 +1,8 @@
/****************************************************************************
* arch/arm/src/c5471/c5471_irq.c
*
* Copyright (C) 2007, 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Copyright (C) 2007, 2009, 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -65,17 +65,15 @@ volatile uint32_t *current_regs;
* Private Data
****************************************************************************/
/* The value of _vflashstart is defined in ld.script. It
* could be hard-coded because we know that correct IRAM
* area is 0xffc00000.
/* The value of _svectors is defined in ld.script. It could be hard-coded
* because we know that correct IRAM area is 0xffc00000.
*/
extern int _svectors; /* Type does not matter */
/* The C5471 has FLASH at the low end of memory. The
* rrload bootloaer will catch all interrupts and re-vector
* them to vectors stored in IRAM. The following table is
* used to initialize those vectors.
/* The C5471 has FLASH at the low end of memory. The rrload bootloaer will
* catch all interrupts and re-vector them to vectors stored in IRAM. The
* following table is used to initialize those vectors.
*/
static up_vector_t g_vectorinittab[] =

9
arch/arm/src/dm320/dm320_irq.c
View File

@ -1,8 +1,8 @@
/************************************************************************
* arch/arm/src/dm320/dm320_irq.c
*
* Copyright (C) 2007, 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Copyright (C) 2007, 2009, 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -63,9 +63,8 @@ volatile uint32_t *current_regs;
* Private Data
************************************************************************/
/* The value of _vflashstart is defined in ld.script. It
* could be hard-coded because we know that correct IRAM
* area is 0xffc00000.
/* The value of _svectors is defined in ld.script. It could be hard-
* coded because we know that correct IRAM area is 0xffc00000.
*/
extern int _svectors; /* Type does not matter */

5
arch/avr/src/Makefile
View File

@ -119,11 +119,6 @@ nuttx: $(HEAD_OBJ) board/libboard$(LIBEXT)
@$(NM) $(NUTTX)$(EXEEXT) | \
grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > $(TOPDIR)/System.map
@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`; \
if [ ! -z "$$vflashstart" ]; then \
$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
fi
# This is part of the top-level export target

5
arch/hc/src/Makefile
View File

@ -115,11 +115,6 @@ endif
@$(NM) $(NUTTX)$(EXEEXT) | \
grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > $(TOPDIR)/System.map
@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`; \
if [ ! -z "$$vflashstart" ]; then \
$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
fi
# This is part of the top-level export target

5
arch/mips/src/Makefile
View File

@ -108,11 +108,6 @@ nuttx: $(HEAD_OBJ) board/libboard$(LIBEXT)
@$(NM) $(NUTTX)$(EXEEXT) | \
grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > $(TOPDIR)/System.map
@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`; \
if [ ! -z "$$vflashstart" ]; then \
$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
fi
# This is part of the top-level export target

5
arch/sh/src/Makefile
View File

@ -93,11 +93,6 @@ endif
@$(NM) $(TOPDIR)/$@ | \
grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > $(TOPDIR)/System.map
@export vflashstart=`$(OBJDUMP) --all-headers $(TOPDIR)/$@ | grep _vflashstart | cut -d' ' -f1`; \
if [ ! -z "$$vflashstart" ]; then \
$(OBJCOPY) --adjust-section-vma=.vector=0x$$vflashstart $(TOPDIR)/$@ $(TOPDIR)/$@.flashimage; \
mv $(TOPDIR)/$@.flashimage $(TOPDIR)/$@; \
fi
# This is part of the top-level export target

5
arch/x86/src/Makefile
View File

@ -121,11 +121,6 @@ endif
@$(NM) $(NUTTX)$(EXEEXT) | \
grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > $(TOPDIR)/System.map
@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`; \
if [ ! -z "$$vflashstart" ]; then \
$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
fi
# This is part of the top-level export target

6
configs/c5471evm/httpd/ld.script
View File

@ -1,8 +1,8 @@
/************************************************************
* ld.script
*
* Copyright (C) 2007, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Copyright (C) 2007, 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -39,7 +39,7 @@ SECTIONS
{
/* Interrupt vector trampoline and command line parameters
* are provided in IRAM by the rrload bootloader. Vectors will be
* copied into _svectors from _vflashstart.
* copied into _svectors.
*/
. = 0xffc00000;

6
configs/c5471evm/nettest/ld.script
View File

@ -1,8 +1,8 @@
/************************************************************
* ld.script
*
* Copyright (C) 2007, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Copyright (C) 2007, 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -39,7 +39,7 @@ SECTIONS
{
/* Interrupt vector trampoline and command line parameters
* are provided in IRAM by the rrload bootloader. Vectors will be
* copied into _svectors from _vflashstart.
* copied into _svectors.
*/
. = 0xffc00000;

6
configs/c5471evm/nsh/ld.script
View File

@ -1,8 +1,8 @@
/************************************************************
* ld.script
*
* Copyright (C) 2007, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Copyright (C) 2007, 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -39,7 +39,7 @@ SECTIONS
{
/* Interrupt vector trampoline and command line parameters
* are provided in IRAM by the rrload bootloader. Vectors will be
* copied into _svectors from _vflashstart.
* copied into _svectors.
*/
. = 0xffc00000;

6
configs/c5471evm/ostest/ld.script
View File

@ -1,8 +1,8 @@
/************************************************************
* ld.script
*
* Copyright (C) 2007, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Copyright (C) 2007, 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -39,7 +39,7 @@ SECTIONS
{
/* Interrupt vector trampoline and command line parameters
* are provided in IRAM by the rrload bootloader. Vectors will be
* copied into _svectors from _vflashstart.
* copied into _svectors.
*/
. = 0xffc00000;

36
configs/stm3240g-eval/README.txt
View File

@ -36,17 +36,19 @@ GNU Toolchain Options
toolchain options.
1. The CodeSourcery GNU toolchain,
2. The devkitARM GNU toolchain,
3. Raisonance GNU toolchain, or
4. The NuttX buildroot Toolchain (see below).
2. The Atollic Toolchain,
3. The devkitARM GNU toolchain,
4. Raisonance GNU toolchain, or
5. The NuttX buildroot Toolchain (see below).
All testing has been conducted using the CodeSourcery toolchain for Windows. To use
the devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to
the Atollic, devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to
add one of the following configuration options to your .config (or defconfig)
file:
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux
CONFIG_STM32_ATOLLIC=y : Atollic toolchain under Windows
CONFIG_STM32_DEVKITARM=y : devkitARM under Windows
CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows
CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
@ -54,7 +56,7 @@ GNU Toolchain Options
If you change the default toolchain, then you may also have to modify the PATH in
the setenv.h file if your make cannot find the tools.
NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
NOTE: the CodeSourcery (for Windows), Atollic, devkitARM, and Raisonance toolchains are
Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot
toolchains are Cygwin and/or Linux native toolchains. There are several limitations
to using a Windows based toolchain in a Cygwin environment. The three biggest are:
@ -89,11 +91,31 @@ GNU Toolchain Options
If you have problems with the dependency build (for example, if you are not
building on C:), then you may need to modify tools/mkdeps.sh
NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
-Os.
NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
NOTE 2: The free, "Lite" version of the Atollic toolchain does not support C++
nor does it support ar, nm, objdump, or objdcopy. If you use the Atollic "Lite"
toolchain, you will have to set:
CONFIG_HAVE_CXX=n
In order to compile successfully. Otherwise, you will get errors like:
"C++ Compiler only available in TrueSTUDIO Professional"
The make may then fail in some of the post link processing because of some of
the other missing tools. The Make.defs file replaces the ar and nm with
the default system x86 tool versions and these seem to work okay. Disable all
of the following to avoid using objcopy:
CONFIG_RRLOAD_BINARY=n
CONFIG_INTELHEX_BINARY=n
CONFIG_MOTOROLA_SREC=n
CONFIG_RAW_BINARY=n
NOTE 3: The devkitARM toolchain includes a version of MSYS make. Make sure that
the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
path or will get the wrong version of make.

18
configs/stm3240g-eval/dhcpd/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3240g-eval/dhcpd/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -40,30 +40,42 @@ include ${TOPDIR}/.config
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_ATOLLIC),y)
# Atollic toolchain under Windows
CROSSDEV = arm-atollic-eabi-
ARCROSSDEV =
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
ARCROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@ -91,8 +103,8 @@ CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump

3
configs/stm3240g-eval/dhcpd/defconfig
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3240g-eval/dhcpd/defconfig
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -97,6 +97,7 @@ CONFIG_ARCH_DMA=n
#
CONFIG_STM32_CODESOURCERYW=y
CONFIG_STM32_CODESOURCERYL=n
CONFIG_STM32_ATOLLIC=n
CONFIG_STM32_DEVKITARM=n
CONFIG_STM32_RAISONANCE=n
CONFIG_STM32_BUILDROOT=n

7
configs/stm3240g-eval/dhcpd/setenv.sh
View File

@ -1,7 +1,7 @@
#!/bin/bash
# configs/stm3240g-eval/dhcpd/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -57,6 +57,11 @@ fi
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"

18
configs/stm3240g-eval/nettest/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3240g-eval/nettest/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -40,30 +40,42 @@ include ${TOPDIR}/.config
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_ATOLLIC),y)
# Atollic toolchain under Windows
CROSSDEV = arm-atollic-eabi-
ARCROSSDEV =
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
ARCROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@ -91,8 +103,8 @@ CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump

3
configs/stm3240g-eval/nettest/defconfig
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3240g-eval/nettest/defconfig
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -97,6 +97,7 @@ CONFIG_ARCH_DMA=n
#
CONFIG_STM32_CODESOURCERYW=y
CONFIG_STM32_CODESOURCERYL=n
CONFIG_STM32_ATOLLIC=n
CONFIG_STM32_DEVKITARM=n
CONFIG_STM32_RAISONANCE=n
CONFIG_STM32_BUILDROOT=n

7
configs/stm3240g-eval/nettest/setenv.sh
View File

@ -1,7 +1,7 @@
#!/bin/bash
# configs/stm3240g-eval/nettest/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -57,6 +57,11 @@ fi
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"

18
configs/stm3240g-eval/nsh/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3240g-eval/nsh/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -40,30 +40,42 @@ include ${TOPDIR}/.config
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_ATOLLIC),y)
# Atollic toolchain under Windows
CROSSDEV = arm-atollic-eabi-
ARCROSSDEV =
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
ARCROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@ -91,8 +103,8 @@ CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump

1
configs/stm3240g-eval/nsh/defconfig
View File

@ -97,6 +97,7 @@ CONFIG_ARCH_DMA=n
#
CONFIG_STM32_CODESOURCERYW=y
CONFIG_STM32_CODESOURCERYL=n
CONFIG_STM32_ATOLLIC=n
CONFIG_STM32_DEVKITARM=n
CONFIG_STM32_RAISONANCE=n
CONFIG_STM32_BUILDROOT=n

7
configs/stm3240g-eval/nsh/setenv.sh
View File

@ -1,7 +1,7 @@
#!/bin/bash
# configs/stm3240g-eval/nsh/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -57,6 +57,11 @@ fi
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"

16
configs/stm3240g-eval/nsh2/Make.defs
View File

@ -40,30 +40,42 @@ include ${TOPDIR}/.config
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_ATOLLIC),y)
# Atollic toolchain under Windows
CROSSDEV = arm-atollic-eabi-
ARCROSSDEV =
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
ARCROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@ -91,8 +103,8 @@ CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump

1
configs/stm3240g-eval/nsh2/defconfig
View File

@ -97,6 +97,7 @@ CONFIG_ARCH_DMA=y
#
CONFIG_STM32_CODESOURCERYW=y
CONFIG_STM32_CODESOURCERYL=n
CONFIG_STM32_ATOLLIC=n
CONFIG_STM32_DEVKITARM=n
CONFIG_STM32_RAISONANCE=n
CONFIG_STM32_BUILDROOT=n

5
configs/stm3240g-eval/nsh2/setenv.sh
View File

@ -57,6 +57,11 @@ fi
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"

18
configs/stm3240g-eval/ostest/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3240g-eval/ostest/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -40,30 +40,42 @@ include ${TOPDIR}/.config
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_ATOLLIC),y)
# Atollic toolchain under Windows
CROSSDEV = arm-atollic-eabi-
ARCROSSDEV =
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
ARCROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@ -91,8 +103,8 @@ CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump

3
configs/stm3240g-eval/ostest/defconfig
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3240g-eval/ostest/defconfig
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -97,6 +97,7 @@ CONFIG_ARCH_DMA=n
#
CONFIG_STM32_CODESOURCERYW=y
CONFIG_STM32_CODESOURCERYL=n
CONFIG_STM32_ATOLLIC=n
CONFIG_STM32_DEVKITARM=n
CONFIG_STM32_RAISONANCE=n
CONFIG_STM32_BUILDROOT=n

7
configs/stm3240g-eval/ostest/setenv.sh
View File

@ -1,7 +1,7 @@
#!/bin/bash
# configs/stm3240g-eval/ostest/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -57,6 +57,11 @@ fi
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"

16
configs/stm3240g-eval/telnetd/Make.defs
View File

@ -40,30 +40,42 @@ include ${TOPDIR}/.config
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_ATOLLIC),y)
# Atollic toolchain under Windows
CROSSDEV = arm-atollic-eabi-
ARCROSSDEV =
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
ARCROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@ -91,8 +103,8 @@ CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump

1
configs/stm3240g-eval/telnetd/defconfig
View File

@ -97,6 +97,7 @@ CONFIG_ARCH_DMA=n
#
CONFIG_STM32_CODESOURCERYW=y
CONFIG_STM32_CODESOURCERYL=n
CONFIG_STM32_ATOLLIC=n
CONFIG_STM32_DEVKITARM=n
CONFIG_STM32_RAISONANCE=n
CONFIG_STM32_BUILDROOT=n

5
configs/stm3240g-eval/telnetd/setenv.sh
View File

@ -57,6 +57,11 @@ fi
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"

36
configs/stm32f4discovery/README.txt
View File

@ -35,17 +35,19 @@ GNU Toolchain Options
toolchain options.
1. The CodeSourcery GNU toolchain,
2. The devkitARM GNU toolchain,
3. Raisonance GNU toolchain, or
4. The NuttX buildroot Toolchain (see below).
2. The Atollic Toolchain,
3. The devkitARM GNU toolchain,
4. Raisonance GNU toolchain, or
5. The NuttX buildroot Toolchain (see below).
All testing has been conducted using the CodeSourcery toolchain for Windows. To use
the devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to
the Atollic, devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to
add one of the following configuration options to your .config (or defconfig)
file:
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux
CONFIG_STM32_ATOLLIC=y : Atollic toolchain under Windows
CONFIG_STM32_DEVKITARM=y : devkitARM under Windows
CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows
CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
@ -53,7 +55,7 @@ GNU Toolchain Options
If you change the default toolchain, then you may also have to modify the PATH in
the setenv.h file if your make cannot find the tools.
NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
NOTE: the CodeSourcery (for Windows), Atollic, devkitARM, and Raisonance toolchains are
Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot
toolchains are Cygwin and/or Linux native toolchains. There are several limitations
to using a Windows based toolchain in a Cygwin environment. The three biggest are:
@ -88,11 +90,31 @@ GNU Toolchain Options
If you have problems with the dependency build (for example, if you are not
building on C:), then you may need to modify tools/mkdeps.sh
NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
-Os.
NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
NOTE 2: The free, "Lite" version of the Atollic toolchain does not support C++
nor does it support ar, nm, objdump, or objdcopy. If you use the Atollic "Lite"
toolchain, you will have to set:
CONFIG_HAVE_CXX=n
In order to compile successfully. Otherwise, you will get errors like:
"C++ Compiler only available in TrueSTUDIO Professional"
The make may then fail in some of the post link processing because of some of
the other missing tools. The Make.defs file replaces the ar and nm with
the default system x86 tool versions and these seem to work okay. Disable all
of the following to avoid using objcopy:
CONFIG_RRLOAD_BINARY=n
CONFIG_INTELHEX_BINARY=n
CONFIG_MOTOROLA_SREC=n
CONFIG_RAW_BINARY=n
NOTE 3: The devkitARM toolchain includes a version of MSYS make. Make sure that
the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
path or will get the wrong version of make.

18
configs/stm32f4discovery/nsh/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm32f4discovery/nsh/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -40,30 +40,42 @@ include ${TOPDIR}/.config
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_ATOLLIC),y)
# Atollic toolchain under Windows
CROSSDEV = arm-atollic-eabi-
ARCROSSDEV =
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
ARCROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@ -91,8 +103,8 @@ CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump

1
configs/stm32f4discovery/nsh/defconfig
View File

@ -97,6 +97,7 @@ CONFIG_ARCH_DMA=n
#
CONFIG_STM32_CODESOURCERYW=n
CONFIG_STM32_CODESOURCERYL=y
CONFIG_STM32_ATOLLIC=n
CONFIG_STM32_DEVKITARM=n
CONFIG_STM32_RAISONANCE=n
CONFIG_STM32_BUILDROOT=n

7
configs/stm32f4discovery/nsh/setenv.sh
View File

@ -1,7 +1,7 @@
#!/bin/bash
# configs/stm32f4discovery/nsh/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -57,6 +57,11 @@ fi
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"

18
configs/stm32f4discovery/ostest/Make.defs
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm32f4discovery/ostest/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -40,30 +40,42 @@ include ${TOPDIR}/.config
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_ATOLLIC),y)
# Atollic toolchain under Windows
CROSSDEV = arm-atollic-eabi-
ARCROSSDEV =
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
ARCROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
ARCROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
@ -91,8 +103,8 @@ CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump

1
configs/stm32f4discovery/ostest/defconfig
View File

@ -97,6 +97,7 @@ CONFIG_ARCH_DMA=n
#
CONFIG_STM32_CODESOURCERYW=n
CONFIG_STM32_CODESOURCERYL=y
CONFIG_STM32_ATOLLIC=n
CONFIG_STM32_DEVKITARM=n
CONFIG_STM32_RAISONANCE=n
CONFIG_STM32_BUILDROOT=n

7
configs/stm32f4discovery/ostest/setenv.sh
View File

@ -1,7 +1,7 @@
#!/bin/bash
# configs/stm32f4discovery/ostest/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -57,6 +57,11 @@ fi
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"