arch/espressif: Add MCUboot support for ESP32-C3
Add MCUboot support for ESP32-C3 when using the Espressif HAL
This commit is contained in:
Lucas Saavedra Vaz
Xiang Xiao
parent
0b721ac21c
commit
d1b5558c8b
2
arch/risc-v/src/espressif/.gitignore
vendored
2
arch/risc-v/src/espressif/.gitignore
vendored
@ -1,4 +1,4 @@
|
|||||||
/esp-wireless-drivers-3rdparty
|
/bootloader
|
||||||
/esp-nuttx-bootloader
|
/esp-nuttx-bootloader
|
||||||
/*.zip
|
/*.zip
|
||||||
/esp-hal-3rdparty
|
/esp-hal-3rdparty
|
||||||
|
|||||||
@ -18,18 +18,108 @@
|
|||||||
#
|
#
|
||||||
############################################################################
|
############################################################################
|
||||||
|
|
||||||
BOOTLOADER_VERSION = latest
|
|
||||||
BOOTLOADER_URL = https://github.com/espressif/esp-nuttx-bootloader/releases/download/$(BOOTLOADER_VERSION)
|
|
||||||
|
|
||||||
# Remove quotes from CONFIG_ESPRESSIF_CHIP_SERIES configuration
|
# Remove quotes from CONFIG_ESPRESSIF_CHIP_SERIES configuration
|
||||||
|
|
||||||
CHIP_SERIES = $(patsubst "%",%,$(CONFIG_ESPRESSIF_CHIP_SERIES))
|
CHIP_SERIES = $(patsubst "%",%,$(CONFIG_ESPRESSIF_CHIP_SERIES))
|
||||||
|
|
||||||
|
TOOLSDIR = $(TOPDIR)/tools/espressif
|
||||||
|
CHIPDIR = $(TOPDIR)/arch/risc-v/src/chip
|
||||||
|
HALDIR = $(CHIPDIR)/esp-hal-3rdparty
|
||||||
|
BOOTLOADER_SRCDIR = $(CHIPDIR)/bootloader
|
||||||
|
BOOTLOADER_OUTDIR = $(BOOTLOADER_SRCDIR)/out
|
||||||
|
BOOTLOADER_CONFIG = $(BOOTLOADER_SRCDIR)/bootloader.conf
|
||||||
|
|
||||||
|
# MCUboot
|
||||||
|
|
||||||
|
MCUBOOT_SRCDIR = $(BOOTLOADER_SRCDIR)/mcuboot
|
||||||
|
MCUBOOT_ESPDIR = $(MCUBOOT_SRCDIR)/boot/espressif
|
||||||
|
MCUBOOT_URL = https://github.com/mcu-tools/mcuboot
|
||||||
|
|
||||||
|
# IDFboot
|
||||||
|
|
||||||
|
BLBIN_VERSION = latest
|
||||||
|
BLBIN_URL = https://github.com/espressif/esp-nuttx-bootloader/releases/download/$(BLBIN_VERSION)
|
||||||
|
|
||||||
|
# Helpers for creating the configuration file
|
||||||
|
|
||||||
|
cfg_en = echo "$(1)=$(if $(CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT),1,y)";
|
||||||
|
cfg_dis = echo "$(1)=$(if $(CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT),0,n)";
|
||||||
|
cfg_val = echo "$(1)=$(2)";
|
||||||
|
|
||||||
|
$(BOOTLOADER_SRCDIR):
|
||||||
|
$(Q) mkdir -p $(BOOTLOADER_SRCDIR) &>/dev/null
|
||||||
|
|
||||||
|
$(BOOTLOADER_CONFIG): $(TOPDIR)/.config $(BOOTLOADER_SRCDIR)
|
||||||
|
$(Q) echo "Creating Bootloader configuration"
|
||||||
|
$(Q) { \
|
||||||
|
$(if $(CONFIG_ESPRESSIF_FLASH_2M),$(call cfg_en,CONFIG_ESPTOOLPY_FLASHSIZE_2MB)) \
|
||||||
|
$(if $(CONFIG_ESPRESSIF_FLASH_4M),$(call cfg_en,CONFIG_ESPTOOLPY_FLASHSIZE_4MB)) \
|
||||||
|
$(if $(CONFIG_ESPRESSIF_FLASH_MODE_DIO),$(call cfg_en,CONFIG_ESPTOOLPY_FLASHMODE_DIO)) \
|
||||||
|
$(if $(CONFIG_ESPRESSIF_FLASH_MODE_DOUT),$(call cfg_en,CONFIG_ESPTOOLPY_FLASHMODE_DOUT)) \
|
||||||
|
$(if $(CONFIG_ESPRESSIF_FLASH_MODE_QIO),$(call cfg_en,CONFIG_ESPTOOLPY_FLASHMODE_QIO)) \
|
||||||
|
$(if $(CONFIG_ESPRESSIF_FLASH_MODE_QOUT),$(call cfg_en,CONFIG_ESPTOOLPY_FLASHMODE_QOUT)) \
|
||||||
|
$(if $(CONFIG_ESPRESSIF_FLASH_FREQ_80M),$(call cfg_en,CONFIG_ESPTOOLPY_FLASHFREQ_80M)) \
|
||||||
|
$(if $(CONFIG_ESPRESSIF_FLASH_FREQ_48M),$(call cfg_en,CONFIG_ESPTOOLPY_FLASHFREQ_48M)) \
|
||||||
|
$(if $(CONFIG_ESPRESSIF_FLASH_FREQ_40M),$(call cfg_en,CONFIG_ESPTOOLPY_FLASHFREQ_40M)) \
|
||||||
|
$(if $(CONFIG_ESPRESSIF_FLASH_FREQ_26M),$(call cfg_en,CONFIG_ESPTOOLPY_FLASHFREQ_26M)) \
|
||||||
|
$(if $(CONFIG_ESPRESSIF_FLASH_FREQ_20M),$(call cfg_en,CONFIG_ESPTOOLPY_FLASHFREQ_20M)) \
|
||||||
|
} > $(BOOTLOADER_CONFIG)
|
||||||
|
ifeq ($(CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT),y)
|
||||||
|
$(Q) { \
|
||||||
|
$(call cfg_val,CONFIG_ESP_BOOTLOADER_OFFSET,0x0000) \
|
||||||
|
$(call cfg_val,CONFIG_ESP_BOOTLOADER_SIZE,0xF000) \
|
||||||
|
$(call cfg_val,CONFIG_ESP_IMAGE0_PRIMARY_START_ADDRESS,$(CONFIG_ESPRESSIF_OTA_PRIMARY_SLOT_OFFSET)) \
|
||||||
|
$(call cfg_val,CONFIG_ESP_APPLICATION_SIZE,$(CONFIG_ESPRESSIF_OTA_SLOT_SIZE)) \
|
||||||
|
$(call cfg_val,CONFIG_ESP_IMAGE0_SECONDARY_START_ADDRESS,$(CONFIG_ESPRESSIF_OTA_SECONDARY_SLOT_OFFSET)) \
|
||||||
|
$(call cfg_en,CONFIG_ESP_MCUBOOT_WDT_ENABLE) \
|
||||||
|
$(call cfg_val,CONFIG_ESP_SCRATCH_OFFSET,$(CONFIG_ESPRESSIF_OTA_SCRATCH_OFFSET)) \
|
||||||
|
$(call cfg_val,CONFIG_ESP_SCRATCH_SIZE,$(CONFIG_ESPRESSIF_OTA_SCRATCH_SIZE)) \
|
||||||
|
$(call cfg_en,CONFIG_ESP_CONSOLE_UART) \
|
||||||
|
$(if $(CONFIG_UART0_SERIAL_CONSOLE),$(call cfg_val,CONFIG_ESP_CONSOLE_UART_NUM,0)) \
|
||||||
|
$(if $(CONFIG_UART1_SERIAL_CONSOLE),$(call cfg_val,CONFIG_ESP_CONSOLE_UART_NUM,1)) \
|
||||||
|
} >> $(BOOTLOADER_CONFIG)
|
||||||
|
else
|
||||||
|
$(Q) { \
|
||||||
|
$(call cfg_en,CONFIG_PARTITION_TABLE_CUSTOM) \
|
||||||
|
$(call cfg_val,CONFIG_PARTITION_TABLE_CUSTOM_FILENAME,\"partitions.csv\") \
|
||||||
|
$(call cfg_val,CONFIG_PARTITION_TABLE_OFFSET,$(CONFIG_ESPRESSIF_PARTITION_TABLE_OFFSET)) \
|
||||||
|
} >> $(BOOTLOADER_CONFIG)
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT),y)
|
||||||
|
|
||||||
|
BOOTLOADER_BIN = $(TOPDIR)/mcuboot-$(CHIP_SERIES).bin
|
||||||
|
|
||||||
|
$(MCUBOOT_SRCDIR): $(BOOTLOADER_SRCDIR)
|
||||||
|
$(Q) echo "Cloning MCUboot"
|
||||||
|
$(Q) git clone --quiet $(MCUBOOT_URL) $(MCUBOOT_SRCDIR)
|
||||||
|
$(Q) git -C "$(MCUBOOT_SRCDIR)" checkout --quiet $(CONFIG_ESPRESSIF_MCUBOOT_VERSION)
|
||||||
|
$(Q) git -C "$(MCUBOOT_SRCDIR)" submodule --quiet update --init --recursive ext/mbedtls
|
||||||
|
|
||||||
|
$(BOOTLOADER_BIN): chip/$(ESP_HAL_3RDPARTY_REPO) $(MCUBOOT_SRCDIR) $(BOOTLOADER_CONFIG)
|
||||||
|
$(Q) echo "Building MCUboot"
|
||||||
|
$(Q) $(TOOLSDIR)/build_mcuboot.sh \
|
||||||
|
-c $(CHIP_SERIES) \
|
||||||
|
-f $(BOOTLOADER_CONFIG) \
|
||||||
|
-p $(BOOTLOADER_SRCDIR) \
|
||||||
|
-e $(HALDIR)
|
||||||
|
$(call COPYFILE, $(BOOTLOADER_OUTDIR)/mcuboot-$(CHIP_SERIES).bin, $(TOPDIR))
|
||||||
|
|
||||||
|
bootloader: $(BOOTLOADER_CONFIG) $(BOOTLOADER_BIN)
|
||||||
|
|
||||||
|
clean_bootloader:
|
||||||
|
$(call DELDIR,$(BOOTLOADER_SRCDIR))
|
||||||
|
$(call DELFILE,$(BOOTLOADER_BIN))
|
||||||
|
|
||||||
|
else
|
||||||
|
|
||||||
bootloader:
|
bootloader:
|
||||||
$(Q) echo "Downloading Bootloader binaries"
|
$(Q) echo "Downloading Bootloader binaries"
|
||||||
$(call DOWNLOAD,$(BOOTLOADER_URL),bootloader-$(CHIP_SERIES).bin,$(TOPDIR)/bootloader-$(CHIP_SERIES).bin)
|
$(call DOWNLOAD,$(BLBIN_URL),bootloader-$(CHIP_SERIES).bin,$(TOPDIR)/bootloader-$(CHIP_SERIES).bin)
|
||||||
$(call DOWNLOAD,$(BOOTLOADER_URL),partition-table-$(CHIP_SERIES).bin,$(TOPDIR)/partition-table-$(CHIP_SERIES).bin)
|
$(call DOWNLOAD,$(BLBIN_URL),partition-table-$(CHIP_SERIES).bin,$(TOPDIR)/partition-table-$(CHIP_SERIES).bin)
|
||||||
|
|
||||||
clean_bootloader:
|
clean_bootloader:
|
||||||
$(call DELFILE,$(TOPDIR)/bootloader-$(CHIP_SERIES).bin)
|
$(call DELFILE,$(TOPDIR)/bootloader-$(CHIP_SERIES).bin)
|
||||||
$(call DELFILE,$(TOPDIR)/partition-table-$(CHIP_SERIES).bin)
|
$(call DELFILE,$(TOPDIR)/partition-table-$(CHIP_SERIES).bin)
|
||||||
|
|
||||||
|
endif
|
||||||
|
|||||||
@ -211,6 +211,100 @@ config ESPRESSIF_SOC_RTC_MEM_SUPPORTED
|
|||||||
bool
|
bool
|
||||||
default n
|
default n
|
||||||
|
|
||||||
|
menu "Bootloader and Image Configuration"
|
||||||
|
|
||||||
|
config ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
bool "Enable Native MCUboot"
|
||||||
|
select ESPRESSIF_HAVE_OTA_PARTITION
|
||||||
|
depends on ESPRESSIF_ESP32C3
|
||||||
|
default n
|
||||||
|
---help---
|
||||||
|
Enables the Espressif port of MCUboot bootloader.
|
||||||
|
|
||||||
|
config ESPRESSIF_MCUBOOT_VERSION
|
||||||
|
string "MCUboot version"
|
||||||
|
depends on ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
default "aa7e2b1faae623dbe01bbc6094e71ab44ec9d80a"
|
||||||
|
|
||||||
|
choice
|
||||||
|
prompt "Target slot for image flashing"
|
||||||
|
default ESPRESSIF_ESPTOOL_TARGET_PRIMARY
|
||||||
|
depends on ESPRESSIF_HAVE_OTA_PARTITION
|
||||||
|
---help---
|
||||||
|
Slot to which ESPTOOL will flash the generated binary image.
|
||||||
|
|
||||||
|
config ESPRESSIF_ESPTOOL_TARGET_PRIMARY
|
||||||
|
bool "Application image primary slot"
|
||||||
|
---help---
|
||||||
|
This assumes that the generated image is already pre-validated.
|
||||||
|
This is the recommended option for the initial stages of the
|
||||||
|
application firmware image development.
|
||||||
|
|
||||||
|
config ESPRESSIF_ESPTOOL_TARGET_SECONDARY
|
||||||
|
bool "Application image secondary slot"
|
||||||
|
---help---
|
||||||
|
The application needs to confirm the generated image as valid,
|
||||||
|
otherwise the bootloader may consider it invalid and perform the
|
||||||
|
rollback of the update after a reset.
|
||||||
|
This is the choice most suitable for the development and verification
|
||||||
|
of a secure firmware update workflow.
|
||||||
|
|
||||||
|
endchoice
|
||||||
|
|
||||||
|
config ESPRESSIF_APP_MCUBOOT_HEADER_SIZE
|
||||||
|
int "Application image header size (in bytes)"
|
||||||
|
default 32
|
||||||
|
depends on ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
|
||||||
|
config ESPRESSIF_PARTITION_TABLE_OFFSET
|
||||||
|
hex "Partition Table offset"
|
||||||
|
default 0x8000
|
||||||
|
depends on !ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
|
||||||
|
config ESPRESSIF_HAVE_OTA_PARTITION
|
||||||
|
bool
|
||||||
|
default n
|
||||||
|
|
||||||
|
if ESPRESSIF_HAVE_OTA_PARTITION
|
||||||
|
|
||||||
|
comment "Application Image OTA Update support"
|
||||||
|
|
||||||
|
config ESPRESSIF_OTA_PRIMARY_SLOT_OFFSET
|
||||||
|
hex "Application image primary slot offset"
|
||||||
|
default 0x10000
|
||||||
|
|
||||||
|
config ESPRESSIF_OTA_PRIMARY_SLOT_DEVPATH
|
||||||
|
string "Application image primary slot device path"
|
||||||
|
default "/dev/ota0"
|
||||||
|
|
||||||
|
config ESPRESSIF_OTA_SECONDARY_SLOT_OFFSET
|
||||||
|
hex "Application image secondary slot offset"
|
||||||
|
default 0x110000
|
||||||
|
|
||||||
|
config ESPRESSIF_OTA_SECONDARY_SLOT_DEVPATH
|
||||||
|
string "Application image secondary slot device path"
|
||||||
|
default "/dev/ota1"
|
||||||
|
|
||||||
|
config ESPRESSIF_OTA_SLOT_SIZE
|
||||||
|
hex "Application image slot size (in bytes)"
|
||||||
|
default 0x100000
|
||||||
|
|
||||||
|
config ESPRESSIF_OTA_SCRATCH_OFFSET
|
||||||
|
hex "Scratch partition offset"
|
||||||
|
default 0x210000
|
||||||
|
|
||||||
|
config ESPRESSIF_OTA_SCRATCH_SIZE
|
||||||
|
hex "Scratch partition size"
|
||||||
|
default 0x40000
|
||||||
|
|
||||||
|
config ESPRESSIF_OTA_SCRATCH_DEVPATH
|
||||||
|
string "Scratch partition device path"
|
||||||
|
default "/dev/otascratch"
|
||||||
|
|
||||||
|
endif # ESPRESSIF_HAVE_OTA_PARTITION
|
||||||
|
|
||||||
|
endmenu # Bootloader and Image Configuration
|
||||||
|
|
||||||
menu "Peripheral Support"
|
menu "Peripheral Support"
|
||||||
|
|
||||||
config ESPRESSIF_UART
|
config ESPRESSIF_UART
|
||||||
@ -551,14 +645,6 @@ config ESPRESSIF_HR_TIMER_TASK_STACK_SIZE
|
|||||||
|
|
||||||
endmenu # High Resolution Timer
|
endmenu # High Resolution Timer
|
||||||
|
|
||||||
menu "Application Image Configuration"
|
|
||||||
|
|
||||||
config ESPRESSIF_PARTITION_TABLE_OFFSET
|
|
||||||
hex "Partition Table offset"
|
|
||||||
default 0x8000
|
|
||||||
|
|
||||||
endmenu # Application Image Configuration
|
|
||||||
|
|
||||||
menu "Brownout Detector Configuration"
|
menu "Brownout Detector Configuration"
|
||||||
depends on ESPRESSIF_BROWNOUT_DET
|
depends on ESPRESSIF_BROWNOUT_DET
|
||||||
|
|
||||||
|
|||||||
@ -18,7 +18,6 @@
|
|||||||
#
|
#
|
||||||
############################################################################
|
############################################################################
|
||||||
|
|
||||||
include chip/Bootloader.mk
|
|
||||||
include common/Make.defs
|
include common/Make.defs
|
||||||
|
|
||||||
# The start-up, "head", file. May be either a .S or a .c file.
|
# The start-up, "head", file. May be either a .S or a .c file.
|
||||||
@ -115,3 +114,5 @@ distclean::
|
|||||||
$(call DELFILE,../include/chip/gpio_sig_map.h)
|
$(call DELFILE,../include/chip/gpio_sig_map.h)
|
||||||
$(call DELFILE,../include/chip/irq.h)
|
$(call DELFILE,../include/chip/irq.h)
|
||||||
$(call DELDIR,chip/$(ESP_HAL_3RDPARTY_REPO))
|
$(call DELDIR,chip/$(ESP_HAL_3RDPARTY_REPO))
|
||||||
|
|
||||||
|
include chip/Bootloader.mk
|
||||||
|
|||||||
@ -40,6 +40,10 @@
|
|||||||
#include "esp_cpu.h"
|
#include "esp_cpu.h"
|
||||||
#include "esp_private/brownout.h"
|
#include "esp_private/brownout.h"
|
||||||
#include "hal/wdt_hal.h"
|
#include "hal/wdt_hal.h"
|
||||||
|
#include "soc/ext_mem_defs.h"
|
||||||
|
#include "soc/extmem_reg.h"
|
||||||
|
#include "soc/mmu.h"
|
||||||
|
#include "soc/reg_base.h"
|
||||||
|
|
||||||
/****************************************************************************
|
/****************************************************************************
|
||||||
* Pre-processor Definitions
|
* Pre-processor Definitions
|
||||||
@ -51,6 +55,75 @@
|
|||||||
# define showprogress(c)
|
# define showprogress(c)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
# define PRIMARY_SLOT_OFFSET CONFIG_ESPRESSIF_OTA_PRIMARY_SLOT_OFFSET
|
||||||
|
# define HDR_ATTR __attribute__((section(".entry_addr"))) \
|
||||||
|
__attribute__((used))
|
||||||
|
# define FLASH_MMU_TABLE ((volatile uint32_t*) DR_REG_MMU_TABLE)
|
||||||
|
# define FLASH_MMU_TABLE_SIZE (ICACHE_MMU_SIZE/sizeof(uint32_t))
|
||||||
|
# define MMU_BLOCK_SIZE 0x00010000 /* 64 KB */
|
||||||
|
# define MMU_FLASH_MASK (~(MMU_BLOCK_SIZE - 1))
|
||||||
|
# define CACHE_REG EXTMEM_ICACHE_CTRL1_REG
|
||||||
|
# define CACHE_MASK (EXTMEM_ICACHE_SHUT_IBUS_M | \
|
||||||
|
EXTMEM_ICACHE_SHUT_DBUS_M)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Types
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
extern uint8_t _image_irom_vma[];
|
||||||
|
extern uint8_t _image_irom_lma[];
|
||||||
|
extern uint8_t _image_irom_size[];
|
||||||
|
|
||||||
|
extern uint8_t _image_drom_vma[];
|
||||||
|
extern uint8_t _image_drom_lma[];
|
||||||
|
extern uint8_t _image_drom_size[];
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* ROM Function Prototypes
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
extern int ets_printf(const char *fmt, ...) printf_like(1, 2);
|
||||||
|
extern uint32_t cache_suspend_icache(void);
|
||||||
|
extern void cache_resume_icache(uint32_t val);
|
||||||
|
extern void cache_invalidate_icache_all(void);
|
||||||
|
|
||||||
|
#ifdef CONFIG_ESPRESSIF_ESP32C3
|
||||||
|
extern int cache_dbus_mmu_set(uint32_t ext_ram, uint32_t vaddr,
|
||||||
|
uint32_t paddr, uint32_t psize, uint32_t num,
|
||||||
|
uint32_t fixed);
|
||||||
|
extern int cache_ibus_mmu_set(uint32_t ext_ram, uint32_t vaddr,
|
||||||
|
uint32_t paddr, uint32_t psize, uint32_t num,
|
||||||
|
uint32_t fixed);
|
||||||
|
#elif defined(CONFIG_ESPRESSIF_ESP32C6)
|
||||||
|
extern bool ets_efuse_cache_encryption_enabled(void);
|
||||||
|
extern int cache_mspi_mmu_set(uint32_t sensitive, uint32_t ext_ram,
|
||||||
|
uint32_t vaddr, uint32_t paddr, uint32_t psize,
|
||||||
|
uint32_t num, uint32_t fixed);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Function Prototypes
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
IRAM_ATTR noreturn_function void __start(void);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Data
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
HDR_ATTR static void (*_entry_point)(void) = __start;
|
||||||
|
#endif
|
||||||
|
|
||||||
/****************************************************************************
|
/****************************************************************************
|
||||||
* Public Data
|
* Public Data
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
@ -61,6 +134,101 @@ uint8_t g_idlestack[CONFIG_IDLETHREAD_STACKSIZE]
|
|||||||
aligned_data(16) locate_data(".noinit");
|
aligned_data(16) locate_data(".noinit");
|
||||||
uintptr_t g_idle_topstack = ESP_IDLESTACK_TOP;
|
uintptr_t g_idle_topstack = ESP_IDLESTACK_TOP;
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: calc_mmu_pages
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Calculate the number of cache pages to map.
|
||||||
|
*
|
||||||
|
* Input Parameters:
|
||||||
|
* size - Size of data to map
|
||||||
|
* vaddr - Virtual address where data will be mapped
|
||||||
|
*
|
||||||
|
* Returned Value:
|
||||||
|
* Number of cache MMU pages required to do the mapping.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
static inline uint32_t calc_mmu_pages(uint32_t size, uint32_t vaddr)
|
||||||
|
{
|
||||||
|
return (size + (vaddr - (vaddr & MMU_FLASH_MASK)) + MMU_BLOCK_SIZE - 1) /
|
||||||
|
MMU_BLOCK_SIZE;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: map_rom_segments
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Configure the MMU and Cache peripherals for accessing ROM code and data.
|
||||||
|
*
|
||||||
|
* Input Parameters:
|
||||||
|
* None.
|
||||||
|
*
|
||||||
|
* Returned Value:
|
||||||
|
* None.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
static int map_rom_segments(void)
|
||||||
|
{
|
||||||
|
uint32_t rc = 0;
|
||||||
|
uint32_t regval;
|
||||||
|
uint32_t drom_lma_aligned;
|
||||||
|
uint32_t drom_vma_aligned;
|
||||||
|
uint32_t drom_page_count;
|
||||||
|
uint32_t irom_lma_aligned;
|
||||||
|
uint32_t irom_vma_aligned;
|
||||||
|
uint32_t irom_page_count;
|
||||||
|
|
||||||
|
size_t partition_offset = PRIMARY_SLOT_OFFSET;
|
||||||
|
uint32_t app_irom_lma = partition_offset + (uint32_t)_image_irom_lma;
|
||||||
|
uint32_t app_irom_size = (uint32_t)_image_irom_size;
|
||||||
|
uint32_t app_irom_vma = (uint32_t)_image_irom_vma;
|
||||||
|
uint32_t app_drom_lma = partition_offset + (uint32_t)_image_drom_lma;
|
||||||
|
uint32_t app_drom_size = (uint32_t)_image_drom_size;
|
||||||
|
uint32_t app_drom_vma = (uint32_t)_image_drom_vma;
|
||||||
|
|
||||||
|
uint32_t autoload = cache_suspend_icache();
|
||||||
|
cache_invalidate_icache_all();
|
||||||
|
|
||||||
|
/* Clear the MMU entries that are already set up, so the new app only has
|
||||||
|
* the mappings it creates.
|
||||||
|
*/
|
||||||
|
|
||||||
|
for (size_t i = 0; i < FLASH_MMU_TABLE_SIZE; i++)
|
||||||
|
{
|
||||||
|
FLASH_MMU_TABLE[i] = MMU_INVALID;
|
||||||
|
}
|
||||||
|
|
||||||
|
drom_lma_aligned = app_drom_lma & MMU_FLASH_MASK;
|
||||||
|
drom_vma_aligned = app_drom_vma & MMU_FLASH_MASK;
|
||||||
|
drom_page_count = calc_mmu_pages(app_drom_size, app_drom_vma);
|
||||||
|
rc = cache_dbus_mmu_set(MMU_ACCESS_FLASH, drom_vma_aligned,
|
||||||
|
drom_lma_aligned, 64, (int)drom_page_count, 0);
|
||||||
|
|
||||||
|
irom_lma_aligned = app_irom_lma & MMU_FLASH_MASK;
|
||||||
|
irom_vma_aligned = app_irom_vma & MMU_FLASH_MASK;
|
||||||
|
irom_page_count = calc_mmu_pages(app_irom_size, app_irom_vma);
|
||||||
|
rc |= cache_ibus_mmu_set(MMU_ACCESS_FLASH, irom_vma_aligned,
|
||||||
|
irom_lma_aligned, 64, (int)irom_page_count, 0);
|
||||||
|
|
||||||
|
regval = getreg32(CACHE_REG);
|
||||||
|
regval &= ~(CACHE_MASK);
|
||||||
|
putreg32(regval, CACHE_REG);
|
||||||
|
|
||||||
|
cache_resume_icache(autoload);
|
||||||
|
|
||||||
|
return (int)rc;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
/****************************************************************************
|
/****************************************************************************
|
||||||
* Public Functions
|
* Public Functions
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
@ -71,6 +239,15 @@ uintptr_t g_idle_topstack = ESP_IDLESTACK_TOP;
|
|||||||
|
|
||||||
void __esp_start(void)
|
void __esp_start(void)
|
||||||
{
|
{
|
||||||
|
#ifdef CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
if (map_rom_segments() != 0)
|
||||||
|
{
|
||||||
|
ets_printf("Failed to setup XIP, aborting\n");
|
||||||
|
while (true);
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
#ifdef CONFIG_ESPRESSIF_REGION_PROTECTION
|
#ifdef CONFIG_ESPRESSIF_REGION_PROTECTION
|
||||||
/* Configure region protection */
|
/* Configure region protection */
|
||||||
|
|
||||||
|
|||||||
@ -18,6 +18,12 @@
|
|||||||
*
|
*
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
|
|
||||||
|
cache_dbus_mmu_set = Cache_Dbus_MMU_Set;
|
||||||
|
cache_ibus_mmu_set = Cache_Ibus_MMU_Set;
|
||||||
|
cache_invalidate_icache_all = Cache_Invalidate_ICache_All;
|
||||||
|
cache_resume_icache = Cache_Resume_ICache;
|
||||||
|
cache_suspend_icache = Cache_Suspend_ICache;
|
||||||
|
|
||||||
#ifdef CONFIG_ESPRESSIF_BLE
|
#ifdef CONFIG_ESPRESSIF_BLE
|
||||||
|
|
||||||
/* Lower-case aliases for BLE library symbols not compliant to nxstyle */
|
/* Lower-case aliases for BLE library symbols not compliant to nxstyle */
|
||||||
|
|||||||
@ -48,8 +48,33 @@
|
|||||||
|
|
||||||
#define I_D_SRAM_SIZE (SRAM_DRAM_END - SRAM_DRAM_ORG)
|
#define I_D_SRAM_SIZE (SRAM_DRAM_END - SRAM_DRAM_ORG)
|
||||||
|
|
||||||
|
#ifdef CONFIG_ESPRESSIF_FLASH_2M
|
||||||
|
# define FLASH_SIZE 0x200000
|
||||||
|
#elif defined (CONFIG_ESPRESSIF_FLASH_4M)
|
||||||
|
# define FLASH_SIZE 0x400000
|
||||||
|
#elif defined (CONFIG_ESPRESSIF_FLASH_8M)
|
||||||
|
# define FLASH_SIZE 0x800000
|
||||||
|
#elif defined (CONFIG_ESPRESSIF_FLASH_16M)
|
||||||
|
# define FLASH_SIZE 0x1000000
|
||||||
|
#endif
|
||||||
|
|
||||||
MEMORY
|
MEMORY
|
||||||
{
|
{
|
||||||
|
#ifdef CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
/* The origin values for "metadata" and "ROM" memory regions are the actual
|
||||||
|
* load addresses.
|
||||||
|
*
|
||||||
|
* NOTE: The memory region starting from 0x0 with length represented by
|
||||||
|
* CONFIG_ESPRESSIF_APP_MCUBOOT_HEADER_SIZE is reserved for the MCUboot header,
|
||||||
|
* which will be prepended to the binary file by the "imgtool" during the
|
||||||
|
* signing of firmware image.
|
||||||
|
*/
|
||||||
|
|
||||||
|
metadata (RX) : org = CONFIG_ESPRESSIF_APP_MCUBOOT_HEADER_SIZE, len = 0x20
|
||||||
|
ROM (RX) : org = ORIGIN(metadata) + LENGTH(metadata),
|
||||||
|
len = FLASH_SIZE - ORIGIN(ROM)
|
||||||
|
#endif
|
||||||
|
|
||||||
/* Below values assume the flash cache is on, and have the blocks this
|
/* Below values assume the flash cache is on, and have the blocks this
|
||||||
* uses subtracted from the length of the various regions. The 'data access
|
* uses subtracted from the length of the various regions. The 'data access
|
||||||
* port' dram/drom regions map to the same iram/irom regions but are
|
* port' dram/drom regions map to the same iram/irom regions but are
|
||||||
@ -58,31 +83,53 @@ MEMORY
|
|||||||
|
|
||||||
iram0_0_seg (RX) : org = SRAM_IRAM_ORG, len = I_D_SRAM_SIZE
|
iram0_0_seg (RX) : org = SRAM_IRAM_ORG, len = I_D_SRAM_SIZE
|
||||||
|
|
||||||
/* Flash mapped instruction data.
|
/* Flash mapped instruction data. */
|
||||||
*
|
|
||||||
* The 0x20 offset is a convenience for the app binary image generation.
|
#ifdef CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
irom0_0_seg (RX) : org = 0x42000000, len = FLASH_SIZE
|
||||||
|
#else
|
||||||
|
/* The 0x20 offset is a convenience for the app binary image generation.
|
||||||
* Flash cache has 64KB pages. The .bin file which is flashed to the chip
|
* Flash cache has 64KB pages. The .bin file which is flashed to the chip
|
||||||
* has a 0x18 byte file header, and each segment has a 0x08 byte segment
|
* has a 0x18 byte file header, and each segment has a 0x08 byte segment
|
||||||
* header. Setting this offset makes it simple to meet the flash cache MMU's
|
* header. Setting this offset makes it simple to meet the flash cache MMU's
|
||||||
* constraint that (paddr % 64KB == vaddr % 64KB).
|
* constraint that (paddr % 64KB == vaddr % 64KB).
|
||||||
*/
|
*/
|
||||||
|
|
||||||
irom0_0_seg (RX) : org = 0x42000020, len = 0x800000 - 0x20
|
irom0_0_seg (RX) : org = 0x42000020, len = FLASH_SIZE - 0x20
|
||||||
|
#endif
|
||||||
|
|
||||||
/* Shared data RAM, excluding memory reserved for ROM bss/data/stack. */
|
/* Shared data RAM, excluding memory reserved for ROM bss/data/stack. */
|
||||||
|
|
||||||
dram0_0_seg (RW) : org = SRAM_DRAM_ORG, len = I_D_SRAM_SIZE
|
dram0_0_seg (RW) : org = SRAM_DRAM_ORG, len = I_D_SRAM_SIZE
|
||||||
|
|
||||||
/* Flash mapped constant data.
|
/* Flash mapped constant data. */
|
||||||
*
|
|
||||||
* The 0x20 offset is a convenience for the app binary image generation.
|
#ifdef CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT
|
||||||
|
/* The DROM segment origin is offset by 0x40 for mirroring the actual ROM
|
||||||
|
* image layout:
|
||||||
|
* 0x0 - 0x1F : MCUboot header
|
||||||
|
* 0x20 - 0x3F : Application image metadata section
|
||||||
|
* 0x40 onwards: ROM code and data
|
||||||
|
* This is required to meet the following constraint from the external
|
||||||
|
* flash MMU:
|
||||||
|
* VMA % 64KB == LMA % 64KB
|
||||||
|
* i.e. the lower 16 bits of both the virtual address (address seen by the
|
||||||
|
* CPU) and the load address (physical address of the external flash) must
|
||||||
|
* be equal.
|
||||||
|
*/
|
||||||
|
|
||||||
|
drom0_0_seg (R) : org = 0x3c000000 + ORIGIN(ROM),
|
||||||
|
len = FLASH_SIZE - ORIGIN(ROM)
|
||||||
|
#else
|
||||||
|
/* The 0x20 offset is a convenience for the app binary image generation.
|
||||||
* Flash cache has 64KB pages. The .bin file which is flashed to the chip
|
* Flash cache has 64KB pages. The .bin file which is flashed to the chip
|
||||||
* has a 0x18 byte file header, and each segment has a 0x08 byte segment
|
* has a 0x18 byte file header, and each segment has a 0x08 byte segment
|
||||||
* header. Setting this offset makes it simple to meet the flash cache MMU's
|
* header. Setting this offset makes it simple to meet the flash cache MMU's
|
||||||
* constraint that (paddr % 64KB == vaddr % 64KB).
|
* constraint that (paddr % 64KB == vaddr % 64KB).
|
||||||
*/
|
*/
|
||||||
|
|
||||||
drom0_0_seg (R) : org = 0x3c000020, len = 0x800000 - 0x20
|
drom0_0_seg (R) : org = 0x3c000020, len = FLASH_SIZE - 0x20
|
||||||
|
#endif
|
||||||
|
|
||||||
/* RTC fast memory (executable). Persists over deep sleep. */
|
/* RTC fast memory (executable). Persists over deep sleep. */
|
||||||
|
|
||||||
|
|||||||
@ -0,0 +1,313 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* boards/risc-v/espressif/common/scripts/esp32c3_mcuboot_sections.ld
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* Default entry point: */
|
||||||
|
|
||||||
|
ENTRY(__start);
|
||||||
|
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
.metadata :
|
||||||
|
{
|
||||||
|
/* Magic for load header */
|
||||||
|
|
||||||
|
LONG(0xace637d3)
|
||||||
|
|
||||||
|
/* Application entry point address */
|
||||||
|
|
||||||
|
KEEP(*(.entry_addr))
|
||||||
|
|
||||||
|
/* IRAM metadata:
|
||||||
|
* - Destination address (VMA) for IRAM region
|
||||||
|
* - Flash offset (LMA) for start of IRAM region
|
||||||
|
* - Size of IRAM region
|
||||||
|
*/
|
||||||
|
|
||||||
|
LONG(ADDR(.iram0.text))
|
||||||
|
LONG(LOADADDR(.iram0.text))
|
||||||
|
LONG(SIZEOF(.iram0.text))
|
||||||
|
|
||||||
|
/* DRAM metadata:
|
||||||
|
* - Destination address (VMA) for DRAM region
|
||||||
|
* - Flash offset (LMA) for start of DRAM region
|
||||||
|
* - Size of DRAM region
|
||||||
|
*/
|
||||||
|
|
||||||
|
LONG(ADDR(.dram0.data))
|
||||||
|
LONG(LOADADDR(.dram0.data))
|
||||||
|
LONG(SIZEOF(.dram0.data))
|
||||||
|
} >metadata
|
||||||
|
|
||||||
|
_image_drom_vma = ADDR(.flash.rodata);
|
||||||
|
_image_drom_lma = LOADADDR(.flash.rodata);
|
||||||
|
_image_drom_size = LOADADDR(.flash.rodata) + SIZEOF(.flash.rodata) - _image_drom_lma;
|
||||||
|
|
||||||
|
.flash.rodata :
|
||||||
|
{
|
||||||
|
_srodata = ABSOLUTE(.);
|
||||||
|
*(EXCLUDE_FILE (*libarch.a:esp_spiflash.* esp_head.* esp_start.*) .rodata)
|
||||||
|
*(EXCLUDE_FILE (*libarch.a:esp_spiflash.* esp_head.* esp_start.*) .rodata.*)
|
||||||
|
|
||||||
|
*(.srodata.*)
|
||||||
|
|
||||||
|
*(.irom1.text) /* catch stray ICACHE_RODATA_ATTR */
|
||||||
|
*(.gnu.linkonce.r.*)
|
||||||
|
*(.rodata1)
|
||||||
|
__XT_EXCEPTION_TABLE_ = ABSOLUTE(.);
|
||||||
|
*(.xt_except_table)
|
||||||
|
*(.gcc_except_table .gcc_except_table.*)
|
||||||
|
*(.gnu.linkonce.e.*)
|
||||||
|
*(.gnu.version_r)
|
||||||
|
. = (. + 3) & ~ 3;
|
||||||
|
__eh_frame = ABSOLUTE(.);
|
||||||
|
KEEP(*(.eh_frame))
|
||||||
|
. = (. + 7) & ~ 3;
|
||||||
|
|
||||||
|
/* C++ constructor and destructor tables, properly ordered: */
|
||||||
|
|
||||||
|
_sinit = ABSOLUTE(.);
|
||||||
|
KEEP (*crtbegin.o(.ctors))
|
||||||
|
KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
|
||||||
|
KEEP (*(SORT(.ctors.*)))
|
||||||
|
KEEP (*(.ctors))
|
||||||
|
_einit = ABSOLUTE(.);
|
||||||
|
KEEP (*crtbegin.o(.dtors))
|
||||||
|
KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
|
||||||
|
KEEP (*(SORT(.dtors.*)))
|
||||||
|
KEEP (*(.dtors))
|
||||||
|
|
||||||
|
/* C++ exception handlers table: */
|
||||||
|
|
||||||
|
__XT_EXCEPTION_DESCS_ = ABSOLUTE(.);
|
||||||
|
*(.xt_except_desc)
|
||||||
|
*(.gnu.linkonce.h.*)
|
||||||
|
__XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
|
||||||
|
*(.xt_except_desc_end)
|
||||||
|
*(.dynamic)
|
||||||
|
*(.gnu.version_d)
|
||||||
|
. = ALIGN(4); /* This table MUST be 4-byte aligned */
|
||||||
|
_erodata = ABSOLUTE(.);
|
||||||
|
|
||||||
|
/* Literals are also RO data. */
|
||||||
|
|
||||||
|
_lit4_start = ABSOLUTE(.);
|
||||||
|
*(*.lit4)
|
||||||
|
*(.lit4.*)
|
||||||
|
*(.gnu.linkonce.lit4.*)
|
||||||
|
_lit4_end = ABSOLUTE(.);
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >drom0_0_seg AT>ROM
|
||||||
|
|
||||||
|
.iram0.text :
|
||||||
|
{
|
||||||
|
_iram_start = ABSOLUTE(.);
|
||||||
|
|
||||||
|
/* Vectors go to start of IRAM */
|
||||||
|
|
||||||
|
KEEP(*(.exception_vectors.text));
|
||||||
|
. = ALIGN(4);
|
||||||
|
|
||||||
|
*(.iram1)
|
||||||
|
*(.iram1.*)
|
||||||
|
*libarch.a:esp_spiflash.*(.literal .text .literal.* .text.*)
|
||||||
|
esp_head.*(.literal .text .literal.* .text.*)
|
||||||
|
esp_start.*(.literal .text .literal.* .text.*)
|
||||||
|
*(.wifi0iram .wifi0iram.*)
|
||||||
|
*(.wifirxiram .wifirxiram.*)
|
||||||
|
*(.wifislpiram .wifislpiram.*)
|
||||||
|
*(.wifislprxiram .wifislprxiram.*)
|
||||||
|
} >iram0_0_seg AT>ROM
|
||||||
|
|
||||||
|
.dram0.dummy (NOLOAD):
|
||||||
|
{
|
||||||
|
/* This section is required to skip .iram0.text area because iram0_0_seg
|
||||||
|
* and dram0_0_seg reflect the same address space on different buses.
|
||||||
|
*/
|
||||||
|
|
||||||
|
. = ORIGIN(dram0_0_seg) + _iram_end - _iram_start;
|
||||||
|
} >dram0_0_seg
|
||||||
|
|
||||||
|
/* Shared RAM */
|
||||||
|
|
||||||
|
.dram0.bss (NOLOAD) :
|
||||||
|
{
|
||||||
|
/* .bss initialized on power-up */
|
||||||
|
|
||||||
|
. = ALIGN (8);
|
||||||
|
_sbss = ABSOLUTE(.);
|
||||||
|
*(.dynsbss)
|
||||||
|
*(.sbss)
|
||||||
|
*(.sbss.*)
|
||||||
|
*(.gnu.linkonce.sb.*)
|
||||||
|
*(.scommon)
|
||||||
|
*(.sbss2)
|
||||||
|
*(.sbss2.*)
|
||||||
|
*(.gnu.linkonce.sb2.*)
|
||||||
|
*(.dynbss)
|
||||||
|
KEEP (*(.bss))
|
||||||
|
*(.bss.*)
|
||||||
|
*(.share.mem)
|
||||||
|
*(.gnu.linkonce.b.*)
|
||||||
|
*(COMMON)
|
||||||
|
. = ALIGN(8);
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
} >dram0_0_seg
|
||||||
|
|
||||||
|
.noinit (NOLOAD):
|
||||||
|
{
|
||||||
|
/* This section contains data that is not initialized during load,
|
||||||
|
* or during the application's initialization sequence.
|
||||||
|
*/
|
||||||
|
|
||||||
|
. = ALIGN(8);
|
||||||
|
*(.noinit)
|
||||||
|
*(.noinit.*)
|
||||||
|
. = ALIGN(8);
|
||||||
|
} >dram0_0_seg
|
||||||
|
|
||||||
|
.dram0.data :
|
||||||
|
{
|
||||||
|
/* .data initialized on power-up in ROMed configurations. */
|
||||||
|
|
||||||
|
_sdata = ABSOLUTE(.);
|
||||||
|
KEEP (*(.data))
|
||||||
|
KEEP (*(.data.*))
|
||||||
|
KEEP (*(.gnu.linkonce.d.*))
|
||||||
|
KEEP (*(.data1))
|
||||||
|
__global_pointer$ = . + 0x800;
|
||||||
|
KEEP (*(.sdata))
|
||||||
|
KEEP (*(.sdata.*))
|
||||||
|
KEEP (*(.gnu.linkonce.s.*))
|
||||||
|
KEEP (*(.sdata2))
|
||||||
|
KEEP (*(.sdata2.*))
|
||||||
|
KEEP (*(.gnu.linkonce.s2.*))
|
||||||
|
KEEP (*(.jcr))
|
||||||
|
*(.dram1 .dram1.*)
|
||||||
|
*libarch.a:esp_spiflash.*(.rodata .rodata.*)
|
||||||
|
esp_head.*(.rodata .rodata.*)
|
||||||
|
esp_start.*(.rodata .rodata.*)
|
||||||
|
_edata = ABSOLUTE(.);
|
||||||
|
. = ALIGN(4);
|
||||||
|
|
||||||
|
/* Heap starts at the end of .data */
|
||||||
|
|
||||||
|
_sheap = ABSOLUTE(.);
|
||||||
|
} >dram0_0_seg AT>ROM
|
||||||
|
|
||||||
|
/* Marks the end of IRAM code segment */
|
||||||
|
|
||||||
|
.iram0.text_end (NOLOAD) :
|
||||||
|
{
|
||||||
|
. = ALIGN (16);
|
||||||
|
} >iram0_0_seg
|
||||||
|
|
||||||
|
.iram0.data :
|
||||||
|
{
|
||||||
|
. = ALIGN(16);
|
||||||
|
*(.iram.data)
|
||||||
|
*(.iram.data*)
|
||||||
|
} >iram0_0_seg AT>ROM
|
||||||
|
|
||||||
|
.iram0.bss (NOLOAD) :
|
||||||
|
{
|
||||||
|
. = ALIGN(16);
|
||||||
|
*(.iram.bss)
|
||||||
|
*(.iram.bss*)
|
||||||
|
|
||||||
|
. = ALIGN(16);
|
||||||
|
_iram_end = ABSOLUTE(.);
|
||||||
|
} >iram0_0_seg
|
||||||
|
|
||||||
|
_image_irom_vma = ADDR(.flash.text);
|
||||||
|
_image_irom_lma = LOADADDR(.flash.text);
|
||||||
|
_image_irom_size = LOADADDR(.flash.text) + SIZEOF(.flash.text) - _image_irom_lma;
|
||||||
|
|
||||||
|
/* The alignment of the ".flash.text" output section is forced to
|
||||||
|
* 0x0000FFFF (64KB) to ensure that it will be allocated at the beginning
|
||||||
|
* of the next available Flash block.
|
||||||
|
* This is required to meet the following constraint from the external
|
||||||
|
* flash MMU:
|
||||||
|
* VMA % 64KB == LMA % 64KB
|
||||||
|
* i.e. the lower 16 bits of both the virtual address (address seen by the
|
||||||
|
* CPU) and the load address (physical address of the external flash) must
|
||||||
|
* be equal.
|
||||||
|
*/
|
||||||
|
|
||||||
|
.flash_text_dummy (NOLOAD) : ALIGN(0x0000FFFF)
|
||||||
|
{
|
||||||
|
/* This section is required to skip .flash.rodata area because irom0_0_seg
|
||||||
|
* and drom0_0_seg reflect the same address space on different buses.
|
||||||
|
*/
|
||||||
|
|
||||||
|
. = SIZEOF(.flash.rodata);
|
||||||
|
} >irom0_0_seg
|
||||||
|
|
||||||
|
.flash.text : ALIGN(0x0000FFFF)
|
||||||
|
{
|
||||||
|
_stext = .;
|
||||||
|
|
||||||
|
*(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
|
||||||
|
*(.irom0.text) /* catch stray ICACHE_RODATA_ATTR */
|
||||||
|
*(.fini.literal)
|
||||||
|
*(.fini)
|
||||||
|
*(.gnu.version)
|
||||||
|
. = ALIGN(4);
|
||||||
|
|
||||||
|
_etext = .;
|
||||||
|
} >irom0_0_seg AT>ROM
|
||||||
|
|
||||||
|
.rtc.text :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.rtc.literal .rtc.text)
|
||||||
|
} >rtc_iram_seg AT>ROM
|
||||||
|
|
||||||
|
/* RTC BSS section. */
|
||||||
|
|
||||||
|
.rtc.bss (NOLOAD) :
|
||||||
|
{
|
||||||
|
*(.rtc.bss)
|
||||||
|
} >rtc_iram_seg
|
||||||
|
|
||||||
|
.rtc.data :
|
||||||
|
{
|
||||||
|
*(.rtc.data)
|
||||||
|
*(.rtc.rodata)
|
||||||
|
} >rtc_iram_seg AT>ROM
|
||||||
|
|
||||||
|
/* This section holds RTC data that should have fixed addresses.
|
||||||
|
* The data are not initialized at power-up and are retained during deep sleep.
|
||||||
|
*/
|
||||||
|
.rtc_reserved (NOLOAD):
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_rtc_reserved_start = ABSOLUTE(.);
|
||||||
|
|
||||||
|
/* New data can only be added here to ensure existing data are not moved.
|
||||||
|
Because data have adhered to the end of the segment and code is relied on it.
|
||||||
|
>> put new data here << */
|
||||||
|
|
||||||
|
*(.rtc_timer_data_in_rtc_mem .rtc_timer_data_in_rtc_mem.*)
|
||||||
|
KEEP(*(.bootloader_data_rtc_mem .bootloader_data_rtc_mem.*))
|
||||||
|
_rtc_reserved_end = ABSOLUTE(.);
|
||||||
|
} > rtc_reserved_seg
|
||||||
|
|
||||||
|
_rtc_reserved_length = _rtc_reserved_end - _rtc_reserved_start;
|
||||||
|
}
|
||||||
@ -0,0 +1,47 @@
|
|||||||
|
#
|
||||||
|
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||||
|
#
|
||||||
|
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||||
|
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||||
|
# modifications.
|
||||||
|
#
|
||||||
|
# CONFIG_NSH_ARGCAT is not set
|
||||||
|
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
|
||||||
|
CONFIG_ARCH="risc-v"
|
||||||
|
CONFIG_ARCH_BOARD="esp32c3-generic"
|
||||||
|
CONFIG_ARCH_BOARD_COMMON=y
|
||||||
|
CONFIG_ARCH_BOARD_ESP32C3_GENERIC=y
|
||||||
|
CONFIG_ARCH_CHIP="espressif"
|
||||||
|
CONFIG_ARCH_CHIP_ESPRESSIF=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=1536
|
||||||
|
CONFIG_ARCH_RISCV=y
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
CONFIG_BOARDCTL_RESET=y
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=15000
|
||||||
|
CONFIG_BUILTIN=y
|
||||||
|
CONFIG_DEV_ZERO=y
|
||||||
|
CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT=y
|
||||||
|
CONFIG_FS_PROCFS=y
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||||
|
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
CONFIG_LIBC_PERROR_STDOUT=y
|
||||||
|
CONFIG_LIBC_STRERROR=y
|
||||||
|
CONFIG_NFILE_DESCRIPTORS_PER_BLOCK=6
|
||||||
|
CONFIG_NSH_ARCHINIT=y
|
||||||
|
CONFIG_NSH_BUILTIN_APPS=y
|
||||||
|
CONFIG_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_NSH_READLINE=y
|
||||||
|
CONFIG_NSH_STRERROR=y
|
||||||
|
CONFIG_PREALLOC_TIMERS=0
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
CONFIG_SCHED_BACKTRACE=y
|
||||||
|
CONFIG_SCHED_WAITPID=y
|
||||||
|
CONFIG_START_DAY=29
|
||||||
|
CONFIG_START_MONTH=11
|
||||||
|
CONFIG_START_YEAR=2019
|
||||||
|
CONFIG_SYSTEM_DUMPSTACK=y
|
||||||
|
CONFIG_SYSTEM_NSH=y
|
||||||
|
CONFIG_TESTING_GETPRIME=y
|
||||||
|
CONFIG_TESTING_OSTEST=y
|
||||||
|
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||||
@ -31,9 +31,13 @@ CHIP_SERIES = $(patsubst "%",%,$(CONFIG_ESPRESSIF_CHIP_SERIES))
|
|||||||
# pick the common linker scripts.
|
# pick the common linker scripts.
|
||||||
|
|
||||||
ARCHSCRIPT += $(BOARD_COMMON_DIR)/scripts/$(CHIP_SERIES)_aliases.ld
|
ARCHSCRIPT += $(BOARD_COMMON_DIR)/scripts/$(CHIP_SERIES)_aliases.ld
|
||||||
|
|
||||||
ARCHSCRIPT += $(call FINDSCRIPT,$(CHIP_SERIES)_flat_memory.ld)
|
ARCHSCRIPT += $(call FINDSCRIPT,$(CHIP_SERIES)_flat_memory.ld)
|
||||||
ARCHSCRIPT += $(call FINDSCRIPT,$(CHIP_SERIES)_legacy_sections.ld)
|
|
||||||
|
ifeq ($(CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT),y)
|
||||||
|
ARCHSCRIPT += $(call FINDSCRIPT,$(CHIP_SERIES)_mcuboot_sections.ld)
|
||||||
|
else
|
||||||
|
ARCHSCRIPT += $(call FINDSCRIPT,$(CHIP_SERIES)_legacy_sections.ld)
|
||||||
|
endif
|
||||||
|
|
||||||
ARCHPICFLAGS = -fpic
|
ARCHPICFLAGS = -fpic
|
||||||
|
|
||||||
|
|||||||
@ -58,9 +58,21 @@ else ifeq ($(CONFIG_ESPRESSIF_FLASH_FREQ_20M),y)
|
|||||||
FLASH_FREQ := 20m
|
FLASH_FREQ := 20m
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_ESPRESSIF_FLASH_DETECT),y)
|
||||||
|
ESPTOOL_WRITEFLASH_OPTS := -fs detect -fm dio -ff $(FLASH_FREQ)
|
||||||
|
else
|
||||||
|
ESPTOOL_WRITEFLASH_OPTS := -fs $(FLASH_SIZE) -fm dio -ff $(FLASH_FREQ)
|
||||||
|
endif
|
||||||
|
|
||||||
# Configure the variables according to build environment
|
# Configure the variables according to build environment
|
||||||
|
|
||||||
ifdef ESPTOOL_BINDIR
|
ifdef ESPTOOL_BINDIR
|
||||||
|
ifeq ($(CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT),y)
|
||||||
|
BL_OFFSET := 0x0000
|
||||||
|
BOOTLOADER := $(ESPTOOL_BINDIR)/mcuboot-$(CHIP_SERIES).bin
|
||||||
|
FLASH_BL := $(BL_OFFSET) $(BOOTLOADER)
|
||||||
|
ESPTOOL_BINS := $(FLASH_BL)
|
||||||
|
else
|
||||||
BL_OFFSET := 0x0
|
BL_OFFSET := 0x0
|
||||||
PT_OFFSET := $(CONFIG_ESPRESSIF_PARTITION_TABLE_OFFSET)
|
PT_OFFSET := $(CONFIG_ESPRESSIF_PARTITION_TABLE_OFFSET)
|
||||||
BOOTLOADER := $(ESPTOOL_BINDIR)/bootloader-$(CHIP_SERIES).bin
|
BOOTLOADER := $(ESPTOOL_BINDIR)/bootloader-$(CHIP_SERIES).bin
|
||||||
@ -68,11 +80,29 @@ ifdef ESPTOOL_BINDIR
|
|||||||
FLASH_BL := $(BL_OFFSET) $(BOOTLOADER)
|
FLASH_BL := $(BL_OFFSET) $(BOOTLOADER)
|
||||||
FLASH_PT := $(PT_OFFSET) $(PARTITION_TABLE)
|
FLASH_PT := $(PT_OFFSET) $(PARTITION_TABLE)
|
||||||
ESPTOOL_BINS := $(FLASH_BL) $(FLASH_PT)
|
ESPTOOL_BINS := $(FLASH_BL) $(FLASH_PT)
|
||||||
|
endif
|
||||||
endif
|
endif
|
||||||
|
|
||||||
APP_OFFSET := 0x10000
|
ifeq ($(CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT),y)
|
||||||
APP_IMAGE := nuttx.bin
|
ifeq ($(CONFIG_ESPRESSIF_ESPTOOL_TARGET_PRIMARY),y)
|
||||||
FLASH_APP := $(APP_OFFSET) $(APP_IMAGE)
|
VERIFIED := --confirm
|
||||||
|
APP_OFFSET := $(CONFIG_ESPRESSIF_OTA_PRIMARY_SLOT_OFFSET)
|
||||||
|
else ifeq ($(CONFIG_ESPRESSIF_ESPTOOL_TARGET_SECONDARY),y)
|
||||||
|
VERIFIED :=
|
||||||
|
APP_OFFSET := $(CONFIG_ESPRESSIF_OTA_SECONDARY_SLOT_OFFSET)
|
||||||
|
endif
|
||||||
|
|
||||||
|
APP_IMAGE := nuttx.bin
|
||||||
|
FLASH_APP := $(APP_OFFSET) $(APP_IMAGE)
|
||||||
|
IMGTOOL_ALIGN_ARGS := --align 4
|
||||||
|
IMGTOOL_SIGN_ARGS := --pad $(VERIFIED) $(IMGTOOL_ALIGN_ARGS) -v 0 -s auto \
|
||||||
|
-H $(CONFIG_ESPRESSIF_APP_MCUBOOT_HEADER_SIZE) --pad-header \
|
||||||
|
-S $(CONFIG_ESPRESSIF_OTA_SLOT_SIZE)
|
||||||
|
else
|
||||||
|
APP_OFFSET := 0x10000
|
||||||
|
APP_IMAGE := nuttx.bin
|
||||||
|
FLASH_APP := $(APP_OFFSET) $(APP_IMAGE)
|
||||||
|
endif
|
||||||
|
|
||||||
ESPTOOL_BINS += $(FLASH_APP)
|
ESPTOOL_BINS += $(FLASH_APP)
|
||||||
|
|
||||||
@ -99,6 +129,21 @@ endef
|
|||||||
|
|
||||||
# MKIMAGE -- Convert an ELF file into a compatible binary file
|
# MKIMAGE -- Convert an ELF file into a compatible binary file
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_ESPRESSIF_BOOTLOADER_MCUBOOT),y)
|
||||||
|
define MKIMAGE
|
||||||
|
$(Q) echo "MKIMAGE: NuttX binary"
|
||||||
|
$(Q) if ! imgtool version 1>/dev/null 2>&1; then \
|
||||||
|
echo ""; \
|
||||||
|
echo "imgtool not found. Please run: \"pip install imgtool\""; \
|
||||||
|
echo ""; \
|
||||||
|
echo "Run make again to create the nuttx.bin image."; \
|
||||||
|
exit 1; \
|
||||||
|
fi
|
||||||
|
imgtool sign $(IMGTOOL_SIGN_ARGS) nuttx.hex nuttx.bin
|
||||||
|
$(Q) echo nuttx.bin >> nuttx.manifest
|
||||||
|
$(Q) echo "Generated: nuttx.bin (MCUboot compatible)"
|
||||||
|
endef
|
||||||
|
else
|
||||||
define MKIMAGE
|
define MKIMAGE
|
||||||
$(Q) echo "MKIMAGE: NuttX binary"
|
$(Q) echo "MKIMAGE: NuttX binary"
|
||||||
$(Q) if ! esptool.py version 1>/dev/null 2>&1; then \
|
$(Q) if ! esptool.py version 1>/dev/null 2>&1; then \
|
||||||
@ -117,6 +162,7 @@ define MKIMAGE
|
|||||||
$(Q) echo nuttx.bin >> nuttx.manifest
|
$(Q) echo nuttx.bin >> nuttx.manifest
|
||||||
$(Q) echo "Generated: nuttx.bin"
|
$(Q) echo "Generated: nuttx.bin"
|
||||||
endef
|
endef
|
||||||
|
endif
|
||||||
|
|
||||||
# POSTBUILD -- Perform post build operations
|
# POSTBUILD -- Perform post build operations
|
||||||
|
|
||||||
@ -139,6 +185,6 @@ define FLASH
|
|||||||
fi
|
fi
|
||||||
|
|
||||||
$(eval ESPTOOL_OPTS := -c $(CHIP_SERIES) -p $(ESPTOOL_PORT) -b $(ESPTOOL_BAUD) $(if $(CONFIG_ESPRESSIF_ESPTOOLPY_NO_STUB),--no-stub))
|
$(eval ESPTOOL_OPTS := -c $(CHIP_SERIES) -p $(ESPTOOL_PORT) -b $(ESPTOOL_BAUD) $(if $(CONFIG_ESPRESSIF_ESPTOOLPY_NO_STUB),--no-stub))
|
||||||
$(eval WRITEFLASH_OPTS := $(if $(CONFIG_ESPRESSIF_MERGE_BINS),0x0 nuttx.merged.bin,$(if $(CONFIG_ESPRESSIF_FLASH_DETECT),-fs detect) -fm dio $(ESPTOOL_BINS)))
|
$(eval WRITEFLASH_OPTS := $(if $(CONFIG_ESPRESSIF_MERGE_BINS),0x0 nuttx.merged.bin,$(ESPTOOL_WRITEFLASH_OPTS) $(ESPTOOL_BINS)))
|
||||||
esptool.py $(ESPTOOL_OPTS) write_flash $(WRITEFLASH_OPTS)
|
esptool.py $(ESPTOOL_OPTS) write_flash $(WRITEFLASH_OPTS)
|
||||||
endef
|
endef
|
||||||
|
|||||||
136
tools/espressif/build_mcuboot.sh
Executable file
136
tools/espressif/build_mcuboot.sh
Executable file
@ -0,0 +1,136 @@
|
|||||||
|
#!/usr/bin/env bash
|
||||||
|
|
||||||
|
SCRIPT_NAME=$(basename "${BASH_SOURCE[0]}")
|
||||||
|
|
||||||
|
usage() {
|
||||||
|
echo ""
|
||||||
|
echo "USAGE: ${SCRIPT_NAME} [-h] -c <chip> -f <config> -p <path> -e <hal>"
|
||||||
|
echo ""
|
||||||
|
echo "Where:"
|
||||||
|
echo " -c <chip> Target chip"
|
||||||
|
echo " -f <config> Path to file containing configuration options"
|
||||||
|
echo " -p <path> Path to execute the script"
|
||||||
|
echo " -e <hal> Path to HAL directory"
|
||||||
|
echo " -h Show usage and terminate"
|
||||||
|
echo ""
|
||||||
|
}
|
||||||
|
|
||||||
|
build_mcuboot() {
|
||||||
|
local target=${1}
|
||||||
|
local config=${2}
|
||||||
|
local mcuboot_dir="${exec_path}/mcuboot"
|
||||||
|
local build_dir=".build-${target}"
|
||||||
|
local source_dir="boot/espressif"
|
||||||
|
local output_dir="${exec_path}/out"
|
||||||
|
local toolchain_file="tools/toolchain-${target}.cmake"
|
||||||
|
local mcuboot_config
|
||||||
|
local mcuboot_flashsize
|
||||||
|
local mcuboot_flashmode
|
||||||
|
local mcuboot_flashfreq
|
||||||
|
local make_generator
|
||||||
|
|
||||||
|
mcuboot_config=$(realpath "${config:-${exec_path}/mcuboot.conf}")
|
||||||
|
|
||||||
|
# Try parsing Flash parameters from the mcuboot config file.
|
||||||
|
# If not found, let's assume some commonplace values.
|
||||||
|
|
||||||
|
mcuboot_flashsize=$(sed -n 's/^CONFIG_ESPTOOLPY_FLASHSIZE_\(.*\)MB=1/\1MB/p' "${mcuboot_config}")
|
||||||
|
if [ -z "${mcuboot_flashsize}" ]; then
|
||||||
|
mcuboot_flashsize="4MB"
|
||||||
|
fi
|
||||||
|
|
||||||
|
mcuboot_flashmode=$(sed -n 's/^CONFIG_ESPTOOLPY_FLASHMODE_\(.*\)=1/\L\1/p' "${mcuboot_config}")
|
||||||
|
if [ -z "${mcuboot_flashmode}" ]; then
|
||||||
|
mcuboot_flashmode="dio"
|
||||||
|
fi
|
||||||
|
|
||||||
|
mcuboot_flashfreq=$(sed -n 's/^CONFIG_ESPTOOLPY_FLASHFREQ_\(.*\)M=1/\1m/p' "${mcuboot_config}")
|
||||||
|
if [ -z "${mcuboot_flashfreq}" ]; then
|
||||||
|
mcuboot_flashfreq="40m"
|
||||||
|
fi
|
||||||
|
|
||||||
|
pushd "${exec_path}" &>/dev/null
|
||||||
|
mkdir -p "${output_dir}" &>/dev/null
|
||||||
|
|
||||||
|
# Build with Ninja if installed
|
||||||
|
|
||||||
|
if command -v ninja &>/dev/null; then
|
||||||
|
make_generator="-GNinja"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Build bootloader for selected target
|
||||||
|
|
||||||
|
cd "${mcuboot_dir}" &>/dev/null
|
||||||
|
cmake -DCMAKE_TOOLCHAIN_FILE="${toolchain_file}" \
|
||||||
|
-DMCUBOOT_TARGET="${target}" \
|
||||||
|
-DMCUBOOT_CONFIG_FILE="${mcuboot_config}" \
|
||||||
|
-DESP_HAL_PATH="${esp_hal}" \
|
||||||
|
-DCONFIG_ESP_FLASH_SIZE="${mcuboot_flashsize}" \
|
||||||
|
-DESP_FLASH_MODE="${mcuboot_flashmode}" \
|
||||||
|
-DESP_FLASH_FREQ="${mcuboot_flashfreq}" \
|
||||||
|
-B "${build_dir}" \
|
||||||
|
"${make_generator}" \
|
||||||
|
"${source_dir}"
|
||||||
|
cmake --build "${build_dir}"/
|
||||||
|
|
||||||
|
# Copy bootloader binary file to output directory
|
||||||
|
|
||||||
|
cp "${build_dir}"/mcuboot_"${target}".bin "${output_dir}"/mcuboot-"${target}".bin &>/dev/null
|
||||||
|
|
||||||
|
# Remove build directory
|
||||||
|
|
||||||
|
rm -rf "${build_dir}" &>/dev/null
|
||||||
|
|
||||||
|
popd &>/dev/null
|
||||||
|
}
|
||||||
|
|
||||||
|
while getopts ":hc:f:p:e:" arg; do
|
||||||
|
case "${arg}" in
|
||||||
|
c)
|
||||||
|
chip=${OPTARG}
|
||||||
|
;;
|
||||||
|
f)
|
||||||
|
config=${OPTARG}
|
||||||
|
;;
|
||||||
|
p)
|
||||||
|
exec_path=${OPTARG}
|
||||||
|
;;
|
||||||
|
e)
|
||||||
|
esp_hal=${OPTARG}
|
||||||
|
;;
|
||||||
|
h)
|
||||||
|
usage
|
||||||
|
exit 0
|
||||||
|
;;
|
||||||
|
*)
|
||||||
|
usage
|
||||||
|
exit 1
|
||||||
|
;;
|
||||||
|
esac
|
||||||
|
done
|
||||||
|
|
||||||
|
if [ -z "${chip}" ]; then
|
||||||
|
printf "ERROR: Missing target chip.\n"
|
||||||
|
usage
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if ! [ -d "${esp_hal}" ]; then
|
||||||
|
printf "ERROR: Invalid HAL path.\n"
|
||||||
|
usage
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ ! -d "${exec_path}" ]; then
|
||||||
|
printf "ERROR: Invalid exec path.\n"
|
||||||
|
usage
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -n "${config}" ] && [ ! -f "${config}" ]; then
|
||||||
|
printf "ERROR: Configuration file %s not found.\n" "${config}"
|
||||||
|
usage
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
build_mcuboot "${chip}" "${config}"
|
||||||
Loading…
Reference in New Issue
Block a user