Add support for the Motorola C139 phone
This commit is contained in:
Gregory Nutt
parent
f7e4f25760
commit
d6503f4dd2
@ -5657,4 +5657,6 @@
|
||||
are not file descriptors (and, hence, no file system) (2013-9-27).
|
||||
* arch/arm/src/sama5/sam_gmac.c: GMAC driver and GMII logic is
|
||||
code complete and readay for test (2013-9-27)
|
||||
* configs/compal_e86: Basic board support for the Motorola C139
|
||||
(Compal E86) phone. From Craig Comstock (2013-9-27).
|
||||
|
||||
|
||||
4
configs/compal_e86/Kconfig
Normal file
4
configs/compal_e86/Kconfig
Normal file
@ -0,0 +1,4 @@
|
||||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see misc/tools/kconfig-language.txt.
|
||||
#
|
||||
51
configs/compal_e86/README.txt
Normal file
51
configs/compal_e86/README.txt
Normal file
@ -0,0 +1,51 @@
|
||||
compal_e86
|
||||
==========
|
||||
|
||||
This directory contains the board support for compal e86 phones.
|
||||
|
||||
This port is based on patches contributed by Denis Carikli for both the
|
||||
compal e99 and e88. At the time of initial check-in, the following phones
|
||||
were tested:
|
||||
|
||||
* motorolla c155 (compal e99) with the compalram and highram configuration
|
||||
* motorolla W220 (compal e88)
|
||||
* The openmoko freerunner baseband(compal e88)
|
||||
|
||||
The patches were made by Alan Carvalho de Assis and Denis Carikli using
|
||||
the Stefan Richter's patches that can be found here:
|
||||
|
||||
http://cgit.osmocom.org/cgit/nuttx-bb/log/?h=lputt%2Ftesting
|
||||
|
||||
Osmocom-BB Dependencies and Sercomm
|
||||
===================================
|
||||
|
||||
The build environment assumes that you have the osmocom-bb project
|
||||
directory at same level as the nuttx project:
|
||||
|
||||
|- nuttx
|
||||
|- apps
|
||||
`- osmocom-bb
|
||||
|
||||
If you attempt to build this configuration without osmocom-bb, and that
|
||||
you added support for sercomm in your configuration(CONFIG_SERCOMM_CONSOLE=y)
|
||||
you will get compilation errors in drivers/sercomm due to header files that
|
||||
are needed from the osmocom-bb directory.
|
||||
|
||||
By default, NuttX will not use sercomm (HDLC protocol) to communicate with
|
||||
the host system. Sercomm is the transport used by osmocom-bb that runs on top
|
||||
of serial. See http://bb.osmocom.org/trac/wiki/nuttx-bb/run for detailed
|
||||
the usage of nuttx with sercomm.
|
||||
|
||||
Loading NuttX
|
||||
=============
|
||||
|
||||
The osmocom-bb wiki describes how to load NuttX. See
|
||||
http://bb.osmocom.org/trac/wiki/nuttx-bb for detailed information.
|
||||
The way that nuttx is loaded depends on the configuration (highram/compalram)
|
||||
and phone:
|
||||
|
||||
o compalram is for the ramloader(for phone having a bootloader on flash)
|
||||
o highram is for phones having the romloader(if the phone has a bootrom)
|
||||
or for loading in the ram trough a special loader(loaded first on ram
|
||||
by talking to the ramloader) when having a ramloader(which can only
|
||||
load 64k).
|
||||
6
configs/compal_e86/include/board.h
Normal file
6
configs/compal_e86/include/board.h
Normal file
@ -0,0 +1,6 @@
|
||||
/************************************************************************
|
||||
* configs/nsh_highram/include/board.h
|
||||
*
|
||||
* Supposed to be empty
|
||||
*
|
||||
************************************************************************/
|
||||
6
configs/compal_e86/include/power.h
Normal file
6
configs/compal_e86/include/power.h
Normal file
@ -0,0 +1,6 @@
|
||||
/************************************************************************
|
||||
* configs/nsh_highram/power.h
|
||||
*
|
||||
* Supposed to be empty
|
||||
*
|
||||
************************************************************************/
|
||||
129
configs/compal_e86/nsh_highram/Make.defs
Normal file
129
configs/compal_e86/nsh_highram/Make.defs
Normal file
@ -0,0 +1,129 @@
|
||||
############################################################################
|
||||
# configs/compal_e86/nsh_highram/Make.defs
|
||||
#
|
||||
# Copyright (C) 2007, 2008, 2011, 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
|
||||
ifeq ("${CONFIG_SERCOMM_CONSOLE}","y")
|
||||
OSMODIR = $(TOPDIR)/../../osmocom-bb
|
||||
EXTRA_LIBS = $(OSMODIR)/src/target/firmware/comm/libcomm.a \
|
||||
$(OSMODIR)/src/shared/libosmocore/build-target/src/.libs/libosmocore.a \
|
||||
$(OSMODIR)/src/target/firmware/calypso/libcalypso.a \
|
||||
$(OSMODIR)/src/target/firmware/comm/libcomm.a
|
||||
# ^^^ Stupid hack! Why do I have to put it twice???
|
||||
endif
|
||||
|
||||
CROSSDEV = arm-elf-
|
||||
CC = $(CROSSDEV)gcc
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = -Os -fno-strict-aliasing -fno-strength-reduce \
|
||||
-fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ifeq ($(ARCHCCMAJOR),4)
|
||||
ARCHCPUFLAGS = -mcpu=arm7tdmi -mfloat-abi=soft -fno-builtin
|
||||
else
|
||||
ARCHCPUFLAGS = -mapcs-32 -mcpu=arm7tdmi -msoft-float -fno-builtin
|
||||
endif
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHINCLUDES = -I. -I$(OSMODIR)/src/shared/libosmocore/include -isystem $(TOPDIR)/include
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
|
||||
|
||||
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
||||
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) \
|
||||
-T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld \
|
||||
-no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
define PREPROCESS
|
||||
@echo "CPP: $1->$2"
|
||||
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILE
|
||||
@echo "CC: $1"
|
||||
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ASSEMBLE
|
||||
@echo "AS: $1"
|
||||
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ARCHIVE
|
||||
echo "AR: $2"; \
|
||||
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||
endef
|
||||
|
||||
define CLEAN
|
||||
@rm -f *.o *.a
|
||||
endef
|
||||
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
|
||||
43
configs/compal_e86/nsh_highram/appconfig
Normal file
43
configs/compal_e86/nsh_highram/appconfig
Normal file
@ -0,0 +1,43 @@
|
||||
############################################################################
|
||||
# configs/compal_e88/nsh_highram/appconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# NSH shell
|
||||
CONFIGURED_APPS += examples/nsh
|
||||
CONFIGURED_APPS += system/readline
|
||||
CONFIGURED_APPS += nshlib
|
||||
|
||||
# Path to example in apps/examples
|
||||
CONFIGURED_APPS += examples/hello
|
||||
CONFIGURED_APPS += vsn/poweroff
|
||||
282
configs/compal_e86/nsh_highram/defconfig
Normal file
282
configs/compal_e86/nsh_highram/defconfig
Normal file
@ -0,0 +1,282 @@
|
||||
############################################################################
|
||||
# configs/c5471evm/nsh/defconfig
|
||||
#
|
||||
# Copyright (C) 2007-2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
#
|
||||
# Architecture Selection
|
||||
#
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_ARM=y
|
||||
CONFIG_ARCH_ARM7TDMI=y
|
||||
CONFIG_ARCH_CHIP="calypso"
|
||||
CONFIG_ARCH_CHIP_CALYPSO=y
|
||||
CONFIG_ARCH_BOARD="compal_e86"
|
||||
CONFIG_ARCH_BOARD_COMPALE88=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=1250
|
||||
CONFIG_ROM_VECTORS=n
|
||||
CONFIG_ARCH_LEDS=n
|
||||
CONFIG_ARCH_INTERRUPTSTACK=1024
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
|
||||
CONFIG_DRAM_START=0
|
||||
CONFIG_DRAM_SIZE=8650752
|
||||
|
||||
#
|
||||
# C5471 specific device driver settings
|
||||
#
|
||||
CONFIG_SERCOMM_CONSOLE=y
|
||||
CONFIG_SERIAL_IRDA_CONSOLE=n
|
||||
CONFIG_UART_IRDA_HWFLOWCONTROL=n
|
||||
CONFIG_UART_MODEM_HWFLOWCONTROL=n
|
||||
CONFIG_UART_IRDA_RXBUFSIZE=256
|
||||
CONFIG_UART_MODEM_RXBUFSIZE=256
|
||||
CONFIG_UART_IRDA_TXBUFSIZE=256
|
||||
CONFIG_UART_MODEM_TXBUFSIZE=256
|
||||
CONFIG_UART_IRDA_BAUD=115200
|
||||
CONFIG_UART_MODEM_BAUD=115200
|
||||
CONFIG_UART_IRDA_BITS=8
|
||||
CONFIG_UART_MODEM_BITS=8
|
||||
CONFIG_UART_IRDA_PARITY=0
|
||||
CONFIG_UART_MODEM_PARITY=0
|
||||
CONFIG_UART_IRDA_2STOP=0
|
||||
CONFIG_UART_MODEM_2STOP=0
|
||||
CONFIG_STDIO_LINE_BUFFER=y
|
||||
|
||||
#
|
||||
# C5471 Ethernet Driver settings
|
||||
CONFIG_C5471_NET_STATS=n
|
||||
ETHERNET_PHY_LU3X31T_T64=1
|
||||
ETHERNET_PHY_AC101L=2
|
||||
CONFIG_C5471_ETHERNET_PHY=ETHERNET_PHY_LU3X31T_T64
|
||||
CONFIG_NET_C5471_AUTONEGOTIATION=y
|
||||
CONFIG_NET_C5471_BASET100=n
|
||||
CONFIG_NET_C5471_BASET10=n
|
||||
|
||||
#
|
||||
# General build options
|
||||
#
|
||||
CONFIG_RRLOAD_BINARY=n
|
||||
CONFIG_INTELHEX_BINARY=n
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_HAVE_LIBM=n
|
||||
|
||||
#
|
||||
# General OS setup
|
||||
#
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
CONFIG_DEBUG=n
|
||||
CONFIG_DEBUG_VERBOSE=n
|
||||
CONFIG_DEBUG_SYMBOLS=n
|
||||
CONFIG_MM_REGIONS=1
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_RR_INTERVAL=200
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_START_YEAR=2007
|
||||
CONFIG_START_MONTH=2
|
||||
CONFIG_START_DAY=13
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
CONFIG_DEV_LOWCONSOLE=n
|
||||
CONFIG_MUTEX_TYPES=n
|
||||
CONFIG_PRIORITY_INHERITANCE=n
|
||||
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||
CONFIG_SEM_NNESTPRIO=0
|
||||
CONFIG_FDCLONE_DISABLE=n
|
||||
CONFIG_FDCLONE_STDIO=n
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_NXFLAT=n
|
||||
|
||||
#
|
||||
# The following can be used to disable categories of
|
||||
# APIs supported by the OS. If the compiler supports
|
||||
# weak functions, then it should not be necessary to
|
||||
# disable functions unless you want to restrict usage
|
||||
# of those APIs.
|
||||
#
|
||||
# There are certain dependency relationships in these
|
||||
# features.
|
||||
#
|
||||
# o mq_notify logic depends on signals to awaken tasks
|
||||
# waiting for queues to become full or empty.
|
||||
# o pthread_condtimedwait() depends on signals to wake
|
||||
# up waiting tasks.
|
||||
#
|
||||
CONFIG_DISABLE_CLOCK=n
|
||||
CONFIG_DISABLE_POSIX_TIMERS=n
|
||||
CONFIG_DISABLE_PTHREAD=n
|
||||
CONFIG_DISABLE_SIGNALS=n
|
||||
CONFIG_DISABLE_MQUEUE=y
|
||||
CONFIG_DISABLE_MOUNTPOINT=n
|
||||
CONFIG_DISABLE_ENVIRON=n
|
||||
CONFIG_DISABLE_POLL=y
|
||||
|
||||
#
|
||||
# FAT filesystem configuration
|
||||
#
|
||||
CONFIG_FS_FAT=n
|
||||
CONFIG_FS_ROMFS=n
|
||||
|
||||
#
|
||||
# Misc libc settings
|
||||
#
|
||||
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||
|
||||
#
|
||||
# Allow for architecture optimized implementations
|
||||
#
|
||||
# The architecture can provide optimized versions of the
|
||||
# following to improve sysem performance
|
||||
#
|
||||
CONFIG_ARCH_MEMCPY=n
|
||||
CONFIG_ARCH_MEMCMP=n
|
||||
CONFIG_ARCH_MEMMOVE=n
|
||||
CONFIG_ARCH_MEMSET=n
|
||||
CONFIG_ARCH_STRCMP=n
|
||||
CONFIG_ARCH_STRCPY=n
|
||||
CONFIG_ARCH_STRNCPY=n
|
||||
CONFIG_ARCH_STRLEN=n
|
||||
CONFIG_ARCH_STRNLEN=n
|
||||
CONFIG_ARCH_BZERO=n
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_STDIO_BUFFER_SIZE=1024
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_PREALLOC_MQ_MSGS=0
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=4
|
||||
CONFIG_PREALLOC_WDOGS=8
|
||||
CONFIG_PREALLOC_TIMERS=8
|
||||
|
||||
# SPI driver
|
||||
#
|
||||
CONFIG_SPI_OWNBUS=y
|
||||
CONFIG_SPI_EXCHANGE=y
|
||||
|
||||
#
|
||||
# TCP/IP and UDP support via uIP
|
||||
#
|
||||
CONFIG_NET=n
|
||||
CONFIG_NET_IPv6=n
|
||||
CONFIG_NSOCKET_DESCRIPTORS=8
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
CONFIG_NET_BUFSIZE=420
|
||||
CONFIG_NET_TCP=y
|
||||
CONFIG_NET_TCP_CONNS=8
|
||||
CONFIG_NET_NTCP_READAHEAD_BUFFERS=32
|
||||
CONFIG_NET_TCPBACKLOG=n
|
||||
CONFIG_NET_MAX_LISTENPORTS=8
|
||||
CONFIG_NET_UDP=y
|
||||
CONFIG_NET_UDP_CHECKSUMS=y
|
||||
#CONFIG_NET_UDP_CONNS=4
|
||||
CONFIG_NET_ICMP=y
|
||||
CONFIG_NET_ICMP_PING=n
|
||||
#CONFIG_NET_PINGADDRCONF=0
|
||||
CONFIG_NET_STATISTICS=y
|
||||
#CONFIG_NET_RECEIVE_WINDOW=
|
||||
#CONFIG_NET_ARPTAB_SIZE=8
|
||||
CONFIG_NET_BROADCAST=n
|
||||
#CONFIG_NET_FWCACHE_SIZE=2
|
||||
|
||||
#
|
||||
# UIP Network Utilities
|
||||
#
|
||||
CONFIG_NET_DHCP_LIGHT=n
|
||||
CONFIG_NET_RESOLV_ENTRIES=4
|
||||
|
||||
#
|
||||
# Settings for examples/uip
|
||||
CONFIG_EXAMPLE_UIP_NOMAC=y
|
||||
CONFIG_EXAMPLE_UIP_IPADDR=0x0a000002
|
||||
CONFIG_EXAMPLE_UIP_DRIPADDR=0x0a000001
|
||||
CONFIG_EXAMPLE_UIP_NETMASK=0xffffff00
|
||||
CONFIG_EXAMPLE_UIP_DHCPC=n
|
||||
|
||||
#
|
||||
# Settings for examples/nettest
|
||||
CONFIG_EXAMPLE_NETTEST_SERVER=n
|
||||
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
|
||||
CONFIG_EXAMPLE_NETTEST_NOMAC=y
|
||||
CONFIG_EXAMPLE_NETTEST_IPADDR=0x0a000002
|
||||
CONFIG_EXAMPLE_NETTEST_DRIPADDR=0x0a000001
|
||||
CONFIG_EXAMPLE_NETTEST_NETMASK=0xffffff00
|
||||
CONFIG_EXAMPLE_NETTEST_CLIENTIP=0x0a000001
|
||||
|
||||
#
|
||||
# Settings for examples/nsh
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
CONFIG_NSH_TELNET=n
|
||||
CONFIG_NSH_IOBUFFER_SIZE=512
|
||||
CONFIG_NSH_CMD_SIZE=40
|
||||
CONFIG_NSH_STACKSIZE=4096
|
||||
CONFIG_NSH_DHCPC=n
|
||||
CONFIG_NSH_NOMAC=y
|
||||
CONFIG_NSH_IPADDR=0x0a000002
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001
|
||||
CONFIG_NSH_NETMASK=0xffffff00
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
|
||||
#
|
||||
# Settings for examples/hello
|
||||
CONFIG_EXAMPLES_HELLO_BUILTIN=y
|
||||
|
||||
#
|
||||
# Settings for examples/wget
|
||||
#
|
||||
CONFIG_EXAMPLE_WGET_URL="http://www.nuttx.org/index.html"
|
||||
CONFIG_EXAMPLE_WGET_NOMAC=y
|
||||
CONFIG_EXAMPLE_WGET_IPADDR=0x0a000002
|
||||
CONFIG_EXAMPLE_WGET_DRIPADDR=0x0a000001
|
||||
CONFIG_EXAMPLE_WGET_NETMASK=0xffffff00
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_BOOT_RUNFROMFLASH=n
|
||||
CONFIG_BOOT_COPYTORAM=n
|
||||
CONFIG_CUSTOM_STACK=n
|
||||
#CONFIG_STACK_POINTER
|
||||
CONFIG_IDLETHREAD_STACKSIZE=4096
|
||||
CONFIG_USERMAIN_STACKSIZE=4096
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=4096
|
||||
CONFIG_HEAP_BASE=
|
||||
CONFIG_HEAP_SIZE=
|
||||
74
configs/compal_e86/nsh_highram/setenv.sh
Normal file
74
configs/compal_e86/nsh_highram/setenv.sh
Normal file
@ -0,0 +1,74 @@
|
||||
#!/bin/bash
|
||||
# compal_e86/nsh_highram/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2007, 2008, 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||
# toolchain under Windows. You will also have to edit this if you install
|
||||
# this toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
142
configs/compal_e86/scripts/ld.script
Normal file
142
configs/compal_e86/scripts/ld.script
Normal file
@ -0,0 +1,142 @@
|
||||
/*
|
||||
* Linker script for running from internal SRAM on Compal phones
|
||||
*
|
||||
* This script is tailored specifically to the requirements imposed
|
||||
* on us by the Compal bootloader.
|
||||
*
|
||||
*/
|
||||
|
||||
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(__start)
|
||||
MEMORY
|
||||
{
|
||||
|
||||
/* E86 stacked flash 32mbit flash, 4mbit sram, DBB internal 256kb SRAM */
|
||||
/* 0x800000-0x87ffff */ /* bump up because we have 32mbit instead of 16mbit */
|
||||
/* compal-loaded binary: our text, initialized data */
|
||||
LRAM (rw) : ORIGIN = 0x00800000, LENGTH = 0x00040000
|
||||
TRAM (rw) : ORIGIN = 0x00840000, LENGTH = 0x00020000
|
||||
/* compal-loaded binary: our unitialized data, stacks, heap */
|
||||
IRAM (rw) : ORIGIN = 0x00860000, LENGTH = 0x00020000
|
||||
|
||||
/* E88 NOR flash 16mbits, SRAM 256 kb, DBB has 256kb internal SRAM */
|
||||
/* 0x800000-0x83ffff */
|
||||
/* compal-loaded binary: our text, initialized data */
|
||||
/*
|
||||
LRAM (rw) : ORIGIN = 0x00800000, LENGTH = 0x00020000
|
||||
TRAM (rw) : ORIGIN = 0x00820000, LENGTH = 0x00010000
|
||||
*/
|
||||
/* compal-loaded binary: our unitialized data, stacks, heap */
|
||||
/*
|
||||
IRAM (rw) : ORIGIN = 0x00830000, LENGTH = 0x00010000
|
||||
*/
|
||||
}
|
||||
SECTIONS
|
||||
{
|
||||
. = 0x800000;
|
||||
|
||||
/* romloader data section, contains passthru interrupt vectors */
|
||||
.compal.loader (NOLOAD) : { . = 0x100; } > LRAM
|
||||
|
||||
/* image signature (prepended by osmocon according to phone type) */
|
||||
.compal.header (NOLOAD) : { . = 4; } > LRAM
|
||||
|
||||
/* initialization code */
|
||||
. = ALIGN(4);
|
||||
.text.start : {
|
||||
PROVIDE(__start = .);
|
||||
KEEP(*(.text.start))
|
||||
*(.text.start)
|
||||
} > TRAM
|
||||
|
||||
/* exception vectors from 0x80001c to 0x800034 */
|
||||
.text.exceptions 0x80001c : AT (LOADADDR(.text.start) + SIZEOF(.text.start)) {
|
||||
KEEP(*(.text.exceptions))
|
||||
* (.text.exceptions)
|
||||
. = ALIGN(4);
|
||||
} > LRAM
|
||||
PROVIDE(_exceptions = LOADADDR(.text.exceptions));
|
||||
|
||||
/* code */
|
||||
. = ALIGN(4);
|
||||
.text (LOADADDR(.text.exceptions) + SIZEOF(.text.exceptions)) :
|
||||
AT (LOADADDR(.text.exceptions) + SIZEOF(.text.exceptions)) {
|
||||
/* regular code */
|
||||
*(.text*)
|
||||
/* always-in-ram code */
|
||||
*(.ramtext*)
|
||||
/* gcc voodoo */
|
||||
*(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
|
||||
. = ALIGN(4);
|
||||
} > TRAM
|
||||
PROVIDE(_text_start = LOADADDR(.text));
|
||||
PROVIDE(_text_end = LOADADDR(.text) + SIZEOF(.text));
|
||||
|
||||
/* constructor pointers */
|
||||
.ctors : {
|
||||
/* ctor count */
|
||||
LONG(SIZEOF(.ctors) / 4 - 2)
|
||||
/* ctor pointers */
|
||||
KEEP(*(SORT(.ctors)))
|
||||
/* end of list */
|
||||
LONG(0)
|
||||
} > TRAM
|
||||
PROVIDE(_ctor_start = LOADADDR(.ctors));
|
||||
PROVIDE(_ctor_end = LOADADDR(.ctors) + SIZEOF(.ctors));
|
||||
|
||||
/* destructor pointers */
|
||||
.dtors : {
|
||||
/* dtor count */
|
||||
LONG(SIZEOF(.dtors) / 4 - 2)
|
||||
/* dtor pointers */
|
||||
KEEP(*(SORT(.dtors)))
|
||||
/* end of list */
|
||||
LONG(0)
|
||||
} > TRAM
|
||||
PROVIDE(_dtor_start = LOADADDR(.dtors));
|
||||
PROVIDE(_dtor_end = LOADADDR(.dtors) + SIZEOF(.dtors));
|
||||
|
||||
/* read-only data */
|
||||
. = ALIGN(4);
|
||||
.rodata : {
|
||||
*(.rodata*)
|
||||
} > TRAM
|
||||
PROVIDE(_rodata_start = LOADADDR(.rodata));
|
||||
PROVIDE(_rodata_end = LOADADDR(.rodata) + SIZEOF(.rodata));
|
||||
|
||||
/* initialized data */
|
||||
. = ALIGN(4);
|
||||
.data : {
|
||||
*(.data)
|
||||
} > TRAM
|
||||
PROVIDE(_data_start = LOADADDR(.data));
|
||||
PROVIDE(_data_end = LOADADDR(.data) + SIZEOF(.data));
|
||||
|
||||
/* pic offset tables */
|
||||
. = ALIGN(4);
|
||||
.got : {
|
||||
*(.got)
|
||||
*(.got.plt) *(.igot.plt) *(.got) *(.igot)
|
||||
} > TRAM
|
||||
PROVIDE(_got_start = LOADADDR(.got));
|
||||
PROVIDE(_got_end = LOADADDR(.got) + SIZEOF(.got));
|
||||
|
||||
/* uninitialized data */
|
||||
.bss (NOLOAD) : {
|
||||
. = ALIGN(4);
|
||||
__bss_start = .;
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > IRAM
|
||||
. = ALIGN(4);
|
||||
__bss_end = .;
|
||||
PROVIDE(_bss_start = __bss_start);
|
||||
PROVIDE(_bss_end = __bss_end);
|
||||
|
||||
/* end of image */
|
||||
. = ALIGN(4);
|
||||
_end = .;
|
||||
PROVIDE(end = .);
|
||||
}
|
||||
80
configs/compal_e86/src/Makefile
Normal file
80
configs/compal_e86/src/Makefile
Normal file
@ -0,0 +1,80 @@
|
||||
############################################################################
|
||||
# configs/compal_e86/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2007, 2008, 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Copyright (C) 2011 Stefan Richter. All rights reserved.
|
||||
# Author: Stefan Richter <ichgeh@l--putt.de>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
CSRCS = dummy.c
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/arm
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
@( for obj in $(OBJS) ; do \
|
||||
$(call ARCHIVE, $@, $${obj}); \
|
||||
done ; )
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
@touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
@rm -f libboard$(LIBEXT) *~ .*.swp
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
@rm -f Make.dep .depend
|
||||
|
||||
-include Make.dep
|
||||
1
configs/compal_e86/src/dummy.c
Normal file
1
configs/compal_e86/src/dummy.c
Normal file
@ -0,0 +1 @@
|
||||
/* no libboard.a otherwise */
|
||||
Loading…
Reference in New Issue
Block a user