sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Nucleo-f4x1re: Fix some joystick pin definitions

Browse Source
This commit is contained in:
Gregory Nutt 2014-12-04 12:04:21 -06:00
parent 39ccffb28f
commit da72a93012
4 changed files with 20 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
configs/nucleo-f4x1re/README.txt
View File

@ -576,6 +576,16 @@ Shields
CONFIG_EXAMPLES_AJOYSTICK_DEVNAME="/dev/ajoy0"
CONFIG_EXAMPLES_AJOYSTICK_SIGNO=13
STATUS:
2014-12-04:
- Without ADC DMA support, it is not possible to sample both X and Y
with a single ADC. Right now, only one axis is being converted.
- There is conflicts with some of the Arduino data pins and the
default USART1 configuration. I am currently running with USART1
but with CONFIG_NUCLEO_F401RE_AJOY_MINBUTTONS to eliminate the
conflict.
- Current showstopper: I am not getting joystick button interrupts.
Configurations
==============

8
configs/nucleo-f4x1re/src/nucleo-f4x1re.h
View File

@ -205,15 +205,15 @@
#define ADC_YOUPUT 0 /* Y output is on ADC channel 0 */
#define GPIO_BUTTON_A \
(GPIO_INPUT | GPIO_FLOAT |GPIO_EXTI | GPIO_PORTB | GPIO_PIN3)
(GPIO_INPUT | GPIO_FLOAT |GPIO_EXTI | GPIO_PORTA | GPIO_PIN8)
#define GPIO_BUTTON_B \
(GPIO_INPUT | GPIO_FLOAT |GPIO_EXTI | GPIO_PORTB | GPIO_PIN5)
(GPIO_INPUT | GPIO_FLOAT |GPIO_EXTI | GPIO_PORTB | GPIO_PIN10)
#define GPIO_BUTTON_C \
(GPIO_INPUT | GPIO_FLOAT |GPIO_EXTI | GPIO_PORTB | GPIO_PIN4)
#define GPIO_BUTTON_D \
(GPIO_INPUT | GPIO_FLOAT |GPIO_EXTI | GPIO_PORTB | GPIO_PIN10)
(GPIO_INPUT | GPIO_FLOAT |GPIO_EXTI | GPIO_PORTB | GPIO_PIN5)
#define GPIO_BUTTON_E \
(GPIO_INPUT | GPIO_FLOAT |GPIO_EXTI | GPIO_PORTA | GPIO_PIN8)
(GPIO_INPUT | GPIO_FLOAT |GPIO_EXTI | GPIO_PORTB | GPIO_PIN3)
#define GPIO_BUTTON_F \
(GPIO_INPUT | GPIO_FLOAT |GPIO_EXTI | GPIO_PORTA | GPIO_PIN9)
#define GPIO_BUTTON_G \

5
configs/nucleo-f4x1re/src/stm32_ajoystick.c
View File

@ -474,7 +474,10 @@ int board_ajoy_initialize(void)
}
#endif
/* Configure the GPIO pins as interrupting inputs. */
/* Configure the GPIO pins as interrupting inputs. NOTE: This is
* unnecessary for interrupting pins since it will also be done by
* stm32_gpiosetevent().
*/
for (i = 0; i < AJOY_NGPIOS; i++)
{

4
configs/stm3210e-eval/src/stm32_djoystick.c
View File

@ -284,8 +284,8 @@ int stm32_djoy_initialization(void)
{
int i;
/* Configure the GPIO pins as inputs. NOTE that EXTI interrupts are
* configured for some pins but NOT yet set up.
/* Configure the GPIO pins as inputs. NOTE: This is unnecessary for
* interrupting pins since it will also be done by stm32_gpiosetevent().
*/
for (i = 0; i < DJOY_NGPIOS; i++)