Update some comments

Documentation

@@ -1 +1 @@
-Subproject commit 402546464095015a48662c75a13861a6100153fd
+Subproject commit bc3e2537116a608a90b89e9e1a7b2c72593d8c58

drivers/mtd/skeleton.c

@@ -100,7 +100,7 @@ static struct skel_dev_s g_skeldev =
     skel_bwrite,
     skel_read,
 #ifdef CONFIG_MTD_BYTE_WRITE
-    skel_write,
+    skel_write,   /* Should be NULL if the byte write method is not supported */
 #endif
     skel_ioctl
   },
@@ -226,7 +226,8 @@ static ssize_t skel_read(FAR struct mtd_dev_s *dev, off_t offset,
  *
  * Description:
  *   Some FLASH parts have the ability to write an arbitrary number of
- *   bytes to an arbitrary offset on the device.
+ *   bytes to an arbitrary offset on the device.  This method should be
+ *   implement only for devices that support such access.
  *
  ****************************************************************************/
 

drivers/timers/ds3231.h

@@ -169,7 +169,7 @@
 #      define DS1307_CR_RS_32KHZ         (3 << DS1307_CR_RS_SHIFT) /* 32.768kHz */
 #    define DS1307_CR_SQWE               (1 << 4)  /* Bit 4:  Square wave enable */
 #    define DS1307_CR_OUT                (1 << 7)  /* Bit 7:  Output control */
-#  define DS1307_RAM_BASE                0x08      /* 0x08-0x3f: 56x8 RAM */
+#  define DS1307_RAM_BASER               0x08      /* 0x08-0x3f: 56x8 RAM */
 #endif
 
 #if defined(CONFIG_RTC_DS3231) || defined(CONFIG_RTC_DS3232) || defined(CONFIG_RTC_DS3234)
@@ -334,7 +334,7 @@
 #endif /* CONFIG_RTC_DS3231 || CONFIG_RTC_DS3232 || CONFIG_RTC_DS3234 */
 
 #ifdef CONFIG_RTC_DS3232
-#  define DS3232_SRAM_BASE               0x14      /* 0x14-0xff: SRAM */
+#  define DS3232_SRAM_BASER              0x14      /* 0x14-0xff: SRAM */
 #endif /* CONFIG_RTC_DS3232 */
 
 #ifdef CONFIG_RTC_DS3234

include/nuttx/arch.h

@@ -1770,7 +1770,7 @@ size_t  up_check_intstack_remain(void);
  * Description:
  *   Initialize the builtin, MCU hardware RTC per the selected
  *   configuration.  This function is called once very early in the OS
- *   initialization sequence
+ *   initialization sequence.
  *
  *   NOTE that initialization of external RTC hardware that depends on the
  *   availability of OS resources (such as SPI or I2C) must be deferred
@@ -1803,7 +1803,7 @@ int up_rtc_initialize(void);
  *   None
  *
  * Returned Value:
- *   The current time in seconds
+ *   The current time in seconds.
  *
  ************************************************************************************/
 
@@ -1823,7 +1823,7 @@ time_t up_rtc_time(void);
  *   tp - The location to return the high resolution time value.
  *
  * Returned Value:
- *   Zero (OK) on success; a negated errno on failure
+ *   Zero (OK) on success; a negated errno value on failure.
  *
  ************************************************************************************/
 
@@ -1850,7 +1850,7 @@ int up_rtc_gettime(FAR struct timespec *tp);
  *   tp - The location to return the high resolution time value.
  *
  * Returned Value:
- *   Zero (OK) on success; a negated errno on failure
+ *   Zero (OK) on success; a negated errno value on failure.
  *
  ************************************************************************************/
 
@@ -1869,7 +1869,7 @@ int up_rtc_getdatetime(FAR struct tm *tp);
  *   tp - the time to use
  *
  * Returned Value:
- *   Zero (OK) on success; a negated errno on failure
+ *   Zero (OK) on success; a negated errno value on failure.
  *
  ************************************************************************************/