sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add lpc313x header files

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2429 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2009-12-25 15:09:11 +00:00
parent ed0d056aaf
commit dc65d64e70
1 changed files with 161 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

161
arch/arm/src/lpc313x/lpc313x_lcd.h Executable file
View File

@ -0,0 +1,161 @@
/************************************************************************************************
* arch/arm/src/lpc313x/lpc313x_lcd.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC313X_LCD_H
#define __ARCH_ARM_SRC_LPC313X_LCD_H
/************************************************************************************************
* Included Files
************************************************************************************************/
#include <nuttx/config.h>
#include "lpc313x_memorymap.h"
/************************************************************************************************
* Pre-processor Definitions
************************************************************************************************/
/* LCD register base address offset into the APB2 domain ****************************************/
#define LPC313X_LCD_VBASE (LPC313X_APB2_VSECTION+LPC313X_APB2_LCD_OFFSET)
#define LPC313X_LCD_PBASE (LPC313X_APB2_PSECTION+LPC313X_APB2_LCD_OFFSET)
/* LCD register offsets (with respect to the LCD base) ******************************************/
#define LPC313X_LCD_STATUS_OFFSET 0x000 /* Status register */
#define LPC313X_LCD_CONTROL_OFFSET 0x004 /* Control register */
#define LPC313X_LCD_INTRAW_OFFSET 0x008 /* Interrupt Raw register */
#define LPC313X_LCD_INTCLEAR_OFFSET 0x00c /* Interrupt Clear register */
#define LPC313X_LCD_INTMASK_OFFSET 0x010 /* Interrupt Mask Register */
#define LPC313X_LCD_READCMD_OFFSET 0x014 /* Read Command register */
#define LPC313X_LCD_INSTBYTE_OFFSET 0x020 /* Instruction Byte Register */
#define LPC313X_LCD_DATABYTE_OFFSET 0x030 /* Data Byte Register */
#define LPC313X_LCD_INSTWORD_OFFSET 0x040 /* Instruction Word register */
#define LPC313X_LCD_DATAWORD_OFFSET 0x080 /* Data Word register */
/* LCD register (virtual) addresses *************************************************************/
#define LPC313X_LCD_STATUS (LPC313X_LCD_VBASE+LPC313X_LCD_STATUS_OFFSET)
#define LPC313X_LCD_CONTROL (LPC313X_LCD_VBASE+LPC313X_LCD_CONTROL_OFFSET)
#define LPC313X_LCD_INTRAW (LPC313X_LCD_VBASE+LPC313X_LCD_INTRAW_OFFSET)
#define LPC313X_LCD_INTCLEAR (LPC313X_LCD_VBASE+LPC313X_LCD_INTCLEAR_OFFSET)
#define LPC313X_LCD_INTMASK (LPC313X_LCD_VBASE+LPC313X_LCD_INTMASK_OFFSET)
#define LPC313X_LCD_READCMD (LPC313X_LCD_VBASE+LPC313X_LCD_READCMD_OFFSET)
#define LPC313X_LCD_INSTBYTE (LPC313X_LCD_VBASE+LPC313X_LCD_INSTBYTE_OFFSET)
#define LPC313X_LCD_DATABYTE (LPC313X_LCD_VBASE+LPC313X_LCD_DATABYTE_OFFSET)
#define LPC313X_LCD_INSTWORD (LPC313X_LCD_VBASE+LPC313X_LCD_INSTWORD_OFFSET)
#define LPC313X_LCD_DATAWORD (LPC313X_LCD_VBASE+LPC313X_LCD_DATAWORD_OFFSET)
/* LCD register bit definitions *****************************************************************/
/* LCD interface Status Register LCD_STATUS, address 0x15000400 */
#define LCD_STATUS_COUNTER_SHIFT (5) /* Bits 5-9: Current value of the FIFO counter */
#define LCD_STATUS_COUNTER_MASK (0x1f << LCD_STATUS_COUNTER_SHIFT)
#define LCD_STATUS_INTERFACEBUSY (1 << 4) /* Bit 4: LCD interface still reading value */
#define LCD_STATUS_INTREADVALID (1 << 3) /* Bit 3: Value read from the LCD controller is valid */
#define LCD_STATUS_INTFIFOOVERRUN (1 << 2) /* Bit 2: Value written is larger than the FIFO can hold */
#define LCD_STATUS_INTFIFOHALFEMPTY (1 << 1) /* Bit 1: FIFO is less then half full */
#define LCD_STATUS_INTFIFOEMPTY (1 << 0) /* Bit 0: FIFO is empty */
/* LCD interface Control register LCD_CONTROL, address 0x15000404 */
#define LCD_CONTROL_BYASYNCRELCLK (1 << 20) /* Bit 20: Bypass PCLK & LCDLCOK asynch logic */
#define LCD_CONTROL_IF16 (1 << 19) /* Bit 19: Interface to 16 bit LCD-Controller*/
#define LCD_CONTROL_LOOPBACK (1 << 18) /* Bit 18: LCD Interface in Loopback mode*/
#define LCD_CONTROL_MSBFIRST (1 << 17) /* Bit 17: Send multi-byte data MSB first*/
#define LCD_CONTROL_INVERTERD (1 << 16) /* Bit 16: Invert polarity of E_RD*/
#define LCD_CONTROL_INVERTCS (1 << 15) /* Bit 15: Invert CS*/
#define LCD_CONTROL_BUSYRSVALUE (1 << 14) /* Bit 14: Busy check on RS=1*/
#define LCD_CONTROL_BUSYBITNR_SHIFT (10) /* Bits 10-13: Bit that represents busy flag*/
#define LCD_CONTROL_BUSYBITNR_MASK (15 << LCD_CONTROL_BUSYBITNR_SHIFT)
#define LCD_CONTROL_BUSYVALUE (1 << 9) /* Bit 9: LCD controller is busy if bit=1*/
#define LCD_CONTROL_BUSYFLAGCHECK (1 << 8) /* Bit 8: Enable the busy-flag-checking*/
#define LCD_CONTROL_SERRDPOSS_SHIFT (9) /* Bits 6-7: 7:6 Serial sample mode*/
#define LCD_CONTROL_SERRDPOSS_MASK (3 << LCD_CONTROL_SERRDPOSS_SHIFT)
# define LCD_CONTROL_SERRDPOSS_START (0 << LCD_CONTROL_SERRDPOSS_SHIFT) /* Sample at beginning of cycle*/
# define LCD_CONTROL_SERRDPOSS_FOURTH (1 << LCD_CONTROL_SERRDPOSS_SHIFT) /* Sample at 0.25 * cycle*/
# define LCD_CONTROL_SERRDPOSS_HALF (2 << LCD_CONTROL_SERRDPOSS_SHIFT) /* Sample at 0.5 * cycle*/
# define LCD_CONTROL_SERRDPOSS_3FOURTHS (3 << LCD_CONTROL_SERRDPOSS_SHIFT) /* Sample at 0.75 * cycle*/
#define LCD_CONTROL_SERCLKSHIFT_SHIFT (4) /* Bits 4-5: Serial clock mode*/
#define LCD_CONTROL_SERCLKSHIFT_MASK (3 << LCD_CONTROL_SERCLKSHIFT_SHIFT)
# define LCD_CONTROL_SERCLKSHIFT_MODE0 (0 << LCD_CONTROL_SERCLKSHIFT_SHIFT) /* Clock mode 0*/
# define LCD_CONTROL_SERCLKSHIFT_MODE1 (1 << LCD_CONTROL_SERCLKSHIFT_SHIFT) /* Clock mode 1*/
# define LCD_CONTROL_SERCLKSHIFT_MODE2 (2 << LCD_CONTROL_SERCLKSHIFT_SHIFT) /* Clock mode 2*/
# define LCD_CONTROL_SERCLKSHIFT_MODE3 (3 << LCD_CONTROL_SERCLKSHIFT_SHIFT) /* Clock mode 3*/
#define LCD_CONTROL_4BIT (1 << 3) /* Bit 2: LCD interface 4 bit mode (vs 8)*/
#define LCD_CONTROL_MI (1 << 2) /* Bit 2: LCD interface 6800 mode (vs 8080 mode)*/
#define LCD_CONTROL_PS (1 << 1) /* Bit 1: LCD interface serial mode (vs parallel)*/
/* LCD interface Interrupt Raw register LCD_INTRAW, address 0x15000408
* LCD interface Interrupt Clear register LCD_INTCLEAR, address 0x1500040c
* LCD interface Interrupt Mask register LCD_INTMASK, address 0x15000410
*/
#define LCD_INT_READVALID (1 << 3) /* Bit 3: Value that has been read from the LCD controller */
#define LCD_INT_OVERRUN (1 << 2) /* Bit 2: FIFO overrun */
#define LCD_INT_FIFOHALFEMPTY (1 << 1) /* Bit 1: FIFO is less then half full */
#define LCD_INT_FIFO_EMPTY (1 << 0) /* Bit 0: FIFO is empty */
/* LCD interface Read Command register LCD_READCMD, address 0x15000414 */
#define LCD_READCMD_DATABYTE (1 << 0) /* Bit 0: Read in DATA byte (vs INST) */
/* LCD interface Instruction Byte register LCD_INSTBYTE, address 0x15000420 */
#define LCD_INSTBYTE_WORD_SHIFT (0) /* Bits 0-15: 16 bit mode = 15:0 Instruction */
#define LCD_INSTBYTE_WORD_MASK (0xffff << LCD_INSTBYTE_WORD_SHIFT)
#define LCD_INSTBYTE_BYTE_SHIFT (0) /* Bits 0-7: 8 bit mode = 7:0 Instruction */
#define LCD_INSTBYTE_BYTE_MASK (0xff << LCD_INSTBYTE_BYTE_SHIFT)
/* LCD interface Data Byte register LCD_DATABYTE, address 0x15000430 */
#define LCD_DATABYTE_WORD_SHIFT (0) /* Bits 0-15: 16 bit mode = 15:0 Instruction */
#define LCD_DATABYTE_WORD_MASK (0xffff << LCD_IDATABYTE_WORD_SHIFT)
#define LCD_DATABYTE_BYTE_SHIFT (0) /* Bits 0-7: 8 bit mode = 7:0 Instruction */
#define LCD_DATABYTE_BYTE_MASK (0xff << LCD_IDATABYTE_BYTE_SHIFT)
/************************************************************************************************
* Public Types
************************************************************************************************/
/************************************************************************************************
* Public Data
************************************************************************************************/
/************************************************************************************************
* Public Functions
************************************************************************************************/
#endif /* __ARCH_ARM_SRC_LPC313X_LCD_H */