Add a hello world configuration to help with the SAMA5 bringup
This commit is contained in:
Gregory Nutt
parent
70f0ffdfc5
commit
dc92037e67
@ -5205,4 +5205,7 @@
|
|||||||
me for a long time since most boards don't have DRAM. The more
|
me for a long time since most boards don't have DRAM. The more
|
||||||
generic RAM naming should not produce so much cognitive dissonance
|
generic RAM naming should not produce so much cognitive dissonance
|
||||||
(2013-7-26).
|
(2013-7-26).
|
||||||
|
* configs/sama5d3x-ek/hello: Added a tiny hello world configuration
|
||||||
|
to simplify bring up of the SAMA5 (it will probably be removed
|
||||||
|
later) (2013-7026).
|
||||||
|
|
||||||
|
|||||||
@ -382,8 +382,13 @@ __start:
|
|||||||
mcr CP15_TTBR0(r4)
|
mcr CP15_TTBR0(r4)
|
||||||
mcr CP15_TTBR1(r4)
|
mcr CP15_TTBR1(r4)
|
||||||
|
|
||||||
/* Clear the TTB control register (TTBCR) to indicate that we are using
|
/* Set the TTB control register (TTBCR) to indicate that we are using
|
||||||
* TTBR0. r0 still holds the value of zero.
|
* TTBR0. r0 still holds the value of zero.
|
||||||
|
*
|
||||||
|
* N : 0=Selects TTBR0 and 16KB page table size indexed by VA[31:20]
|
||||||
|
* PD0 : 0=Perform translation table walks using TTBR0
|
||||||
|
* PD1 : 0=Perform translation table walks using TTBR1 (but it is disabled)
|
||||||
|
* EAE : 0=Use 32-bit translation system
|
||||||
*/
|
*/
|
||||||
|
|
||||||
mcr CP15_TTBCR(r0)
|
mcr CP15_TTBCR(r0)
|
||||||
|
|||||||
@ -139,3 +139,4 @@ up_saveusercontext:
|
|||||||
mov r0, #0 /* Return value == 0 */
|
mov r0, #0 /* Return value == 0 */
|
||||||
mov pc, lr /* Return */
|
mov pc, lr /* Return */
|
||||||
.size up_saveusercontext, . - up_saveusercontext
|
.size up_saveusercontext, . - up_saveusercontext
|
||||||
|
.end
|
||||||
|
|||||||
@ -43,12 +43,14 @@
|
|||||||
#include "arm.h"
|
#include "arm.h"
|
||||||
#include "cp15.h"
|
#include "cp15.h"
|
||||||
|
|
||||||
|
.file "arm_vectors.S"
|
||||||
|
|
||||||
/************************************************************************************
|
/************************************************************************************
|
||||||
* Definitions
|
* Pre-processor Definitions
|
||||||
************************************************************************************/
|
************************************************************************************/
|
||||||
|
|
||||||
/************************************************************************************
|
/************************************************************************************
|
||||||
* Global Data
|
* Private Data
|
||||||
************************************************************************************/
|
************************************************************************************/
|
||||||
|
|
||||||
.data
|
.data
|
||||||
@ -76,8 +78,6 @@ g_aborttmp:
|
|||||||
* Public Functions
|
* Public Functions
|
||||||
************************************************************************************/
|
************************************************************************************/
|
||||||
|
|
||||||
.text
|
|
||||||
|
|
||||||
/************************************************************************************
|
/************************************************************************************
|
||||||
* Name: arm_vectorirq
|
* Name: arm_vectorirq
|
||||||
*
|
*
|
||||||
|
|||||||
@ -39,14 +39,19 @@
|
|||||||
|
|
||||||
#include <nuttx/config.h>
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
.file "arm_vectortab.S"
|
||||||
|
|
||||||
/****************************************************************************
|
/****************************************************************************
|
||||||
* Definitions
|
* Pre-processor Definitions
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
|
|
||||||
/****************************************************************************
|
/****************************************************************************
|
||||||
* Global Data
|
* Global Symbols
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
|
|
||||||
|
.globl _vector_start
|
||||||
|
.globl _vector_end
|
||||||
|
|
||||||
/****************************************************************************
|
/****************************************************************************
|
||||||
* Assembly Macros
|
* Assembly Macros
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
@ -101,4 +106,5 @@ _vector_start:
|
|||||||
|
|
||||||
.globl _vector_end
|
.globl _vector_end
|
||||||
_vector_end:
|
_vector_end:
|
||||||
|
.size _vector_start, . - _vector_start
|
||||||
.end
|
.end
|
||||||
|
|||||||
@ -401,7 +401,7 @@
|
|||||||
/* Bit 2: Bufferable bit */
|
/* Bit 2: Bufferable bit */
|
||||||
/* Bit 3: Cacheable bit */
|
/* Bit 3: Cacheable bit */
|
||||||
/* Bits 4-5: Access Permissions bits AP[0:1] */
|
/* Bits 4-5: Access Permissions bits AP[0:1] */
|
||||||
#define PTE_SMALL_AP_MASK (0xfffff000) /* Bits 12-31: Small page base address, PA[31:12] */
|
#define PTE_SMALL_PADDR_MASK (0xfffff000) /* Bits 12-31: Small page base address, PA[31:12] */
|
||||||
|
|
||||||
/* Level 2 Translation Table Access Permissions:
|
/* Level 2 Translation Table Access Permissions:
|
||||||
*
|
*
|
||||||
|
|||||||
@ -264,6 +264,12 @@
|
|||||||
|
|
||||||
#ifndef CONFIG_ARCH_ROMPGTABLE
|
#ifndef CONFIG_ARCH_ROMPGTABLE
|
||||||
|
|
||||||
|
/* Notice that these mappings are a simple 1-to-1 mapping *unless*
|
||||||
|
* CONFIG_ARCH_LOWVECTORS is not defined. In the high vector case, the
|
||||||
|
* register system controls register area is moved out 0f 0xffff:000 where
|
||||||
|
* the high vectors must reside.
|
||||||
|
*/
|
||||||
|
|
||||||
#define SAM_INTMEM_VSECTION 0x00000000 /* 0x00000000-0x0fffffff: Internal Memories */
|
#define SAM_INTMEM_VSECTION 0x00000000 /* 0x00000000-0x0fffffff: Internal Memories */
|
||||||
# define SAM_BOOTMEM_VSECTION 0x00000000 /* 0x00000000-0x000fffff: Boot memory */
|
# define SAM_BOOTMEM_VSECTION 0x00000000 /* 0x00000000-0x000fffff: Boot memory */
|
||||||
# define SAM_ROM_VSECTION 0x00100000 /* 0x00100000-0x001fffff: ROM */
|
# define SAM_ROM_VSECTION 0x00100000 /* 0x00100000-0x001fffff: ROM */
|
||||||
@ -284,12 +290,24 @@
|
|||||||
#define SAM_EBICS3_VSECTION 0x60000000 /* 0x60000000-0x6fffffff: EBI Chip select 2 */
|
#define SAM_EBICS3_VSECTION 0x60000000 /* 0x60000000-0x6fffffff: EBI Chip select 2 */
|
||||||
#define SAM_NFCCR_VSECTION 0x70000000 /* 0x70000000-0x7fffffff: NFC Command Registers */
|
#define SAM_NFCCR_VSECTION 0x70000000 /* 0x70000000-0x7fffffff: NFC Command Registers */
|
||||||
/* 0x80000000-0xefffffff: Undefined */
|
/* 0x80000000-0xefffffff: Undefined */
|
||||||
|
|
||||||
|
/* If CONFIG_ARCH_LOWVECTORS is not defined, then move the system control
|
||||||
|
* registers out of the way.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef CONFIG_ARCH_LOWVECTORS
|
||||||
#define SAM_PERIPH_VSECTION 0xf0000000 /* 0xf0000000-0xffffffff: Internal Peripherals */
|
#define SAM_PERIPH_VSECTION 0xf0000000 /* 0xf0000000-0xffffffff: Internal Peripherals */
|
||||||
# define SAM_PERIPHA_VSECTION 0xf0000000 /* 0xf0000000-0xffffffff: Internal Peripherals */
|
# define SAM_PERIPHA_VSECTION 0xf0000000 /* 0xf0000000-0xffffffff: Internal Peripherals */
|
||||||
# define SAM_PERIPHB_VSECTION 0xf8000000 /* 0xf8000000-0xffffbfff: Internal Peripherals B */
|
# define SAM_PERIPHB_VSECTION 0xf8000000 /* 0xf8000000-0xffffbfff: Internal Peripherals B */
|
||||||
# define SAM_SYSC_VSECTION 0xfff00000 /* 0xfff00000-0xffffffff: System Controller */
|
# define SAM_SYSC_VSECTION 0xfff00000 /* 0xfff00000-0xffffffff: System Controller */
|
||||||
# define SAM_SYSC_VADDR 0xffffc000 /* 0xffffc000-0xffffffff: System Controller */
|
# define SAM_SYSC_VADDR 0xffffc000 /* 0xffffc000-0xffffffff: System Controller */
|
||||||
|
#else
|
||||||
|
#define SAM_PERIPH_VSECTION 0xf0000000 /* 0xf0000000-0xffffffff: Internal Peripherals */
|
||||||
|
# define SAM_PERIPHA_VSECTION 0xf1000000 /* 0xf0000000-0xffffffff: Internal Peripherals */
|
||||||
|
# define SAM_PERIPHB_VSECTION 0xf2000000 /* 0xf8000000-0xffffbfff: Internal Peripherals B */
|
||||||
|
# define SAM_SYSC_VSECTION 0xf300000 /* 0xfff00000-0xffffffff: System Controller */
|
||||||
|
# define SAM_SYSC_VADDR 0xf30fc000 /* 0xffffc000-0xffffffff: System Controller */
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/* Peripheral virtual base addresses */
|
/* Peripheral virtual base addresses */
|
||||||
|
|||||||
@ -38,7 +38,9 @@
|
|||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
|
|
||||||
#include <nuttx/config.h>
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
#include <stdint.h>
|
#include <stdint.h>
|
||||||
|
#include <assert.h>
|
||||||
|
|
||||||
#ifdef CONFIG_PAGING
|
#ifdef CONFIG_PAGING
|
||||||
# include <nuttx/page.h>
|
# include <nuttx/page.h>
|
||||||
@ -304,9 +306,14 @@ static void sam_vectorpermissions(uint32_t mmuflags)
|
|||||||
#ifdef NEED_VECTORMAP
|
#ifdef NEED_VECTORMAP
|
||||||
static void sam_vectormapping(void)
|
static void sam_vectormapping(void)
|
||||||
{
|
{
|
||||||
uint32_t vector_paddr = SAM_VECTOR_PADDR;
|
uint32_t vector_paddr = SAM_VECTOR_PADDR & PTE_SMALL_PADDR_MASK;
|
||||||
uint32_t vector_vaddr = SAM_VECTOR_VADDR;
|
uint32_t vector_vaddr = SAM_VECTOR_VADDR & PTE_SMALL_PADDR_MASK;
|
||||||
uint32_t end_paddr = vector_paddr + VECTOR_TABLE_SIZE;
|
uint32_t vector_size = (uint32_t)&_vector_end - (uint32_t)&_vector_start;
|
||||||
|
uint32_t end_paddr = SAM_VECTOR_PADDR + vector_size;
|
||||||
|
|
||||||
|
/* REVISIT: Cannot really assert in this context */
|
||||||
|
|
||||||
|
DEBUGASSERT (vector_size <= VECTOR_TABLE_SIZE);
|
||||||
|
|
||||||
/* We want to keep our interrupt vectors and interrupt-related logic in
|
/* We want to keep our interrupt vectors and interrupt-related logic in
|
||||||
* zero-wait state internal SRAM (ISRAM). The SAMA5 has 128Kb of ISRAM
|
* zero-wait state internal SRAM (ISRAM). The SAMA5 has 128Kb of ISRAM
|
||||||
@ -324,7 +331,9 @@ static void sam_vectormapping(void)
|
|||||||
|
|
||||||
/* Now set the level 1 descriptor to refer to the level 2 page table. */
|
/* Now set the level 1 descriptor to refer to the level 2 page table. */
|
||||||
|
|
||||||
sam_setl1entry(VECTOR_L2_PBASE, SAM_VECTOR_VADDR, MMU_L1_VECTORFLAGS);
|
sam_setl1entry(VECTOR_L2_PBASE & PMD_PTE_PADDR_MASK,
|
||||||
|
SAM_VECTOR_VADDR & PMD_PTE_PADDR_MASK,
|
||||||
|
MMU_L1_VECTORFLAGS);
|
||||||
}
|
}
|
||||||
#else
|
#else
|
||||||
/* No vector remap */
|
/* No vector remap */
|
||||||
|
|||||||
@ -633,6 +633,35 @@ Configurations
|
|||||||
Configuration sub-directories
|
Configuration sub-directories
|
||||||
-----------------------------
|
-----------------------------
|
||||||
|
|
||||||
|
hello:
|
||||||
|
This configuration directory, performs the (almost) simplest of all
|
||||||
|
possible examples: examples/hello. This just comes up, says hello
|
||||||
|
on the serial console and terminates. This configuration is of
|
||||||
|
value during bring-up because it is small and can run entirely out
|
||||||
|
of internal SRAM.
|
||||||
|
|
||||||
|
NOTES:
|
||||||
|
1. This configuration uses the default USART1 serial console. That
|
||||||
|
is easily changed by reconfiguring to (1) enable a different
|
||||||
|
serial peripheral, and (2) selecting that serial peripheral as
|
||||||
|
the console device.
|
||||||
|
|
||||||
|
2. By default, this configuration is set up to build on Windows
|
||||||
|
under either a Cygwin or MSYS environment using a recent, Windows-
|
||||||
|
native, generic ARM EABI GCC toolchain (such as the CodeSourcery
|
||||||
|
toolchain). Both the build environment and the toolchain
|
||||||
|
selection can easily be changed by reconfiguring:
|
||||||
|
|
||||||
|
CONFIG_HOST_WINDOWS=y : Windows operating system
|
||||||
|
CONFIG_WINDOWS_CYGWIN=y : POSIX environment under windows
|
||||||
|
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
|
||||||
|
|
||||||
|
3. This configuration executes out of internal SRAM an can only
|
||||||
|
be loaded via JTAG.
|
||||||
|
|
||||||
|
CONFIG_SAMA5_BOOT_ISRAM=y : Boot into internal SRAM
|
||||||
|
CONFIG_BOOT_RUNFROMISRAM=y : Run from internal SRAM
|
||||||
|
|
||||||
ostest:
|
ostest:
|
||||||
This configuration directory, performs a simple OS test using
|
This configuration directory, performs a simple OS test using
|
||||||
examples/ostest.
|
examples/ostest.
|
||||||
@ -658,3 +687,11 @@ Configurations
|
|||||||
|
|
||||||
CONFIG_SAMA5_BOOT_ISRAM=y : Boot into internal SRAM
|
CONFIG_SAMA5_BOOT_ISRAM=y : Boot into internal SRAM
|
||||||
CONFIG_BOOT_RUNFROMISRAM=y : Run from internal SRAM
|
CONFIG_BOOT_RUNFROMISRAM=y : Run from internal SRAM
|
||||||
|
|
||||||
|
STATUS:
|
||||||
|
2013-7-26: This ostest configuration is too large to fit in SAMA5
|
||||||
|
internal SRAM (along with a usable heap and a 16KB page table).
|
||||||
|
I do not want to simplify this test because I will, eventually,
|
||||||
|
need to do the entire OS test. But I will need to configure this
|
||||||
|
to run out of FLASH or SDRAM in this future. For now, I created
|
||||||
|
the smaller 'hello' configuration for the basic bringup.
|
||||||
|
|||||||
136
configs/sama5d3x-ek/hello/Make.defs
Normal file
136
configs/sama5d3x-ek/hello/Make.defs
Normal file
@ -0,0 +1,136 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/sama5d3x-ek/hello/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
include ${TOPDIR}/tools/Config.mk
|
||||||
|
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
|
||||||
|
LDSCRIPT = isram.ld
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
|
||||||
|
LDSCRIPT = ddram.ld
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
|
||||||
|
# LDSCRIPT = cs0flash.ld
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y)
|
||||||
|
# LDSCRIPT = cs1flash.ld
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y)
|
||||||
|
# LDSCRIPT = cs2flash.ld
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y)
|
||||||
|
# LDSCRIPT = cs3flash.ld
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native toolchains
|
||||||
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
|
||||||
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
|
||||||
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native toolchain
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||||
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
|
||||||
|
endif
|
||||||
|
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CXX = $(CROSSDEV)g++
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(ARCROSSDEV)ar rcs
|
||||||
|
NM = $(ARCROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-a5 -mfpu=vfpv4-d16
|
||||||
|
ARCHCFLAGS = -fno-builtin
|
||||||
|
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHWARNINGSXX = -Wall -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||||
|
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
ifeq ($(CONFIG_HOST_WINDOWS),y)
|
||||||
|
HOSTEXEEXT = .exe
|
||||||
|
else
|
||||||
|
HOSTEXEEXT =
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native host tools
|
||||||
|
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
|
||||||
|
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
|
||||||
|
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native host tools
|
||||||
|
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
|
||||||
|
endif
|
||||||
|
|
||||||
627
configs/sama5d3x-ek/hello/defconfig
Normal file
627
configs/sama5d3x-ek/hello/defconfig
Normal file
@ -0,0 +1,627 @@
|
|||||||
|
#
|
||||||
|
# Automatically generated file; DO NOT EDIT.
|
||||||
|
# Nuttx/ Configuration
|
||||||
|
#
|
||||||
|
CONFIG_NUTTX_NEWCONFIG=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Setup
|
||||||
|
#
|
||||||
|
# CONFIG_EXPERIMENTAL is not set
|
||||||
|
# CONFIG_HOST_LINUX is not set
|
||||||
|
# CONFIG_HOST_OSX is not set
|
||||||
|
CONFIG_HOST_WINDOWS=y
|
||||||
|
# CONFIG_HOST_OTHER is not set
|
||||||
|
# CONFIG_WINDOWS_NATIVE is not set
|
||||||
|
CONFIG_WINDOWS_CYGWIN=y
|
||||||
|
# CONFIG_WINDOWS_MSYS is not set
|
||||||
|
# CONFIG_WINDOWS_OTHER is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_APPS_DIR="../apps"
|
||||||
|
# CONFIG_BUILD_2PASS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Output Formats
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY is not set
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
# CONFIG_MOTOROLA_SREC is not set
|
||||||
|
CONFIG_RAW_BINARY=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Customize Header Files
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_STDBOOL_H is not set
|
||||||
|
# CONFIG_ARCH_MATH_H is not set
|
||||||
|
# CONFIG_ARCH_FLOAT_H is not set
|
||||||
|
# CONFIG_ARCH_STDARG_H is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Debug Options
|
||||||
|
#
|
||||||
|
# CONFIG_DEBUG is not set
|
||||||
|
# CONFIG_DEBUG_SYMBOLS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Type
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_8051 is not set
|
||||||
|
CONFIG_ARCH_ARM=y
|
||||||
|
# CONFIG_ARCH_AVR is not set
|
||||||
|
# CONFIG_ARCH_HC is not set
|
||||||
|
# CONFIG_ARCH_MIPS is not set
|
||||||
|
# CONFIG_ARCH_RGMP is not set
|
||||||
|
# CONFIG_ARCH_SH is not set
|
||||||
|
# CONFIG_ARCH_SIM is not set
|
||||||
|
# CONFIG_ARCH_X86 is not set
|
||||||
|
# CONFIG_ARCH_Z16 is not set
|
||||||
|
# CONFIG_ARCH_Z80 is not set
|
||||||
|
CONFIG_ARCH="arm"
|
||||||
|
|
||||||
|
#
|
||||||
|
# ARM Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||||
|
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_IMX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||||
|
# CONFIG_ARCH_CHIP_KL is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LM is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||||
|
CONFIG_ARCH_CHIP_SAMA5=y
|
||||||
|
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||||
|
# CONFIG_ARCH_ARM7TDMI is not set
|
||||||
|
# CONFIG_ARCH_ARM926EJS is not set
|
||||||
|
# CONFIG_ARCH_ARM920T is not set
|
||||||
|
# CONFIG_ARCH_CORTEXM0 is not set
|
||||||
|
# CONFIG_ARCH_CORTEXM3 is not set
|
||||||
|
# CONFIG_ARCH_CORTEXM4 is not set
|
||||||
|
CONFIG_ARCH_CORTEXA5=y
|
||||||
|
CONFIG_ARCH_FAMILY="armv7-a"
|
||||||
|
CONFIG_ARCH_CHIP="sama5"
|
||||||
|
CONFIG_ARCH_HAVE_FPU=y
|
||||||
|
CONFIG_ARCH_FPU=y
|
||||||
|
# CONFIG_ARCH_HAVE_MPU is not set
|
||||||
|
CONFIG_ARCH_HAVE_LOWVECTORS=y
|
||||||
|
CONFIG_ARCH_LOWVECTORS=y
|
||||||
|
CONFIG_PGTABLE_VADDR=0x20000000
|
||||||
|
# CONFIG_ARCH_ROMPGTABLE is not set
|
||||||
|
# CONFIG_PAGING is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# ARMv7-A Configuration Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set
|
||||||
|
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM is not set
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL is not set
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# ATSAMA5 Configuration Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D31 is not set
|
||||||
|
CONFIG_ARCH_CHIP_ATSAMA5D33=y
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D34 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D35 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# ATSAMA5 Peripheral Support
|
||||||
|
#
|
||||||
|
# CONFIG_SAMA5_DBGU is not set
|
||||||
|
# CONFIG_SAMA5_PIT is not set
|
||||||
|
# CONFIG_SAMA5_WDT is not set
|
||||||
|
# CONFIG_SAMA5_HSMC is not set
|
||||||
|
# CONFIG_SAMA5_SMD is not set
|
||||||
|
# CONFIG_SAMA5_UART0 is not set
|
||||||
|
# CONFIG_SAMA5_UART1 is not set
|
||||||
|
# CONFIG_SAMA5_USART0 is not set
|
||||||
|
CONFIG_SAMA5_USART1=y
|
||||||
|
# CONFIG_SAMA5_USART2 is not set
|
||||||
|
# CONFIG_SAMA5_USART3 is not set
|
||||||
|
# CONFIG_SAMA5_TWI0 is not set
|
||||||
|
# CONFIG_SAMA5_TWI1 is not set
|
||||||
|
# CONFIG_SAMA5_TWI2 is not set
|
||||||
|
# CONFIG_SAMA5_HSMCI0 is not set
|
||||||
|
# CONFIG_SAMA5_HSMCI1 is not set
|
||||||
|
# CONFIG_SAMA5_HSMCI2 is not set
|
||||||
|
# CONFIG_SAMA5_SPI0 is not set
|
||||||
|
# CONFIG_SAMA5_SPI1 is not set
|
||||||
|
# CONFIG_SAMA5_TC0 is not set
|
||||||
|
# CONFIG_SAMA5_TC1 is not set
|
||||||
|
# CONFIG_SAMA5_PWM is not set
|
||||||
|
# CONFIG_SAMA5_ADC is not set
|
||||||
|
# CONFIG_SAMA5_DMAC0 is not set
|
||||||
|
# CONFIG_SAMA5_DMAC1 is not set
|
||||||
|
# CONFIG_SAMA5_UHPHS is not set
|
||||||
|
# CONFIG_SAMA5_UDPHS is not set
|
||||||
|
# CONFIG_SAMA5_GMAC is not set
|
||||||
|
# CONFIG_SAMA5_EMAC is not set
|
||||||
|
# CONFIG_SAMA5_LCDC is not set
|
||||||
|
# CONFIG_SAMA5_ISI is not set
|
||||||
|
# CONFIG_SAMA5_SSC0 is not set
|
||||||
|
# CONFIG_SAMA5_SSC1 is not set
|
||||||
|
# CONFIG_SAMA5_CAN0 is not set
|
||||||
|
# CONFIG_SAMA5_CAN1 is not set
|
||||||
|
# CONFIG_SAMA5_SHA is not set
|
||||||
|
# CONFIG_SAMA5_AES is not set
|
||||||
|
# CONFIG_SAMA5_TDES is not set
|
||||||
|
# CONFIG_SAMA5_TRNG is not set
|
||||||
|
# CONFIG_SAMA5_ARM is not set
|
||||||
|
# CONFIG_SAMA5_FUSE is not set
|
||||||
|
# CONFIG_SAMA5_MPDDRC is not set
|
||||||
|
# CONFIG_PIO_IRQ is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# External Memory Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_SAMA5_DDRCS is not set
|
||||||
|
# CONFIG_SAMA5_EBICS0 is not set
|
||||||
|
# CONFIG_SAMA5_EBICS1 is not set
|
||||||
|
# CONFIG_SAMA5_EBICS2 is not set
|
||||||
|
# CONFIG_SAMA5_EBICS3 is not set
|
||||||
|
CONFIG_SAMA5_BOOT_ISRAM=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Heap Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_NOINTC is not set
|
||||||
|
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||||
|
# CONFIG_ARCH_DMA is not set
|
||||||
|
CONFIG_ARCH_IRQPRIO=y
|
||||||
|
# CONFIG_CUSTOM_STACK is not set
|
||||||
|
# CONFIG_ADDRENV is not set
|
||||||
|
CONFIG_ARCH_HAVE_VFORK=y
|
||||||
|
CONFIG_ARCH_HAVE_MMU=y
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
# CONFIG_ENDIAN_BIG is not set
|
||||||
|
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||||
|
# CONFIG_ARCH_HAVE_RAMVECTORS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Settings
|
||||||
|
#
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||||
|
# CONFIG_ARCH_CALIBRATION is not set
|
||||||
|
CONFIG_RAM_START=0x20000000
|
||||||
|
CONFIG_RAM_VSTART=0x20000000
|
||||||
|
CONFIG_RAM_SIZE=114688
|
||||||
|
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Boot options
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||||
|
# CONFIG_BOOT_RUNFROMFLASH is not set
|
||||||
|
CONFIG_BOOT_RUNFROMISRAM=y
|
||||||
|
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||||
|
# CONFIG_BOOT_COPYTORAM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Selection
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_BOARD_SAMA5D3X_EK=y
|
||||||
|
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||||
|
CONFIG_ARCH_BOARD="sama5d3x-ek"
|
||||||
|
|
||||||
|
#
|
||||||
|
# Common Board Options
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_HAVE_LEDS=y
|
||||||
|
CONFIG_ARCH_LEDS=y
|
||||||
|
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||||
|
# CONFIG_ARCH_BUTTONS is not set
|
||||||
|
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board-Specific Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# RTOS Features
|
||||||
|
#
|
||||||
|
# CONFIG_BOARD_INITIALIZE is not set
|
||||||
|
CONFIG_MSEC_PER_TICK=10
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||||
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
|
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||||
|
# CONFIG_JULIAN_TIME is not set
|
||||||
|
CONFIG_START_YEAR=2009
|
||||||
|
CONFIG_START_MONTH=9
|
||||||
|
CONFIG_START_DAY=21
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
# CONFIG_MUTEX_TYPES is not set
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||||
|
# CONFIG_FDCLONE_DISABLE is not set
|
||||||
|
# CONFIG_FDCLONE_STDIO is not set
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
CONFIG_SCHED_WAITPID=y
|
||||||
|
# CONFIG_SCHED_STARTHOOK is not set
|
||||||
|
# CONFIG_SCHED_ATEXIT is not set
|
||||||
|
# CONFIG_SCHED_ONEXIT is not set
|
||||||
|
CONFIG_USER_ENTRYPOINT="hello_main"
|
||||||
|
CONFIG_DISABLE_OS_API=y
|
||||||
|
# CONFIG_DISABLE_CLOCK is not set
|
||||||
|
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||||
|
# CONFIG_DISABLE_PTHREAD is not set
|
||||||
|
# CONFIG_DISABLE_SIGNALS is not set
|
||||||
|
# CONFIG_DISABLE_MQUEUE is not set
|
||||||
|
CONFIG_DISABLE_ENVIRON=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Signal Numbers
|
||||||
|
#
|
||||||
|
CONFIG_SIG_SIGUSR1=1
|
||||||
|
CONFIG_SIG_SIGUSR2=2
|
||||||
|
CONFIG_SIG_SIGALARM=3
|
||||||
|
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sizes of configurable things (0 disables)
|
||||||
|
#
|
||||||
|
CONFIG_MAX_TASKS=16
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_NPTHREAD_KEYS=4
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=8
|
||||||
|
CONFIG_NFILE_STREAMS=8
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=4
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=32
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=4
|
||||||
|
CONFIG_PREALLOC_TIMERS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=2048
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||||
|
|
||||||
|
#
|
||||||
|
# Device Drivers
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_POLL=y
|
||||||
|
CONFIG_DEV_NULL=y
|
||||||
|
# CONFIG_DEV_ZERO is not set
|
||||||
|
# CONFIG_LOOP is not set
|
||||||
|
# CONFIG_RAMDISK is not set
|
||||||
|
# CONFIG_CAN is not set
|
||||||
|
# CONFIG_PWM is not set
|
||||||
|
# CONFIG_I2C is not set
|
||||||
|
# CONFIG_SPI is not set
|
||||||
|
# CONFIG_RTC is not set
|
||||||
|
# CONFIG_WATCHDOG is not set
|
||||||
|
# CONFIG_ANALOG is not set
|
||||||
|
# CONFIG_AUDIO_DEVICES is not set
|
||||||
|
# CONFIG_BCH is not set
|
||||||
|
# CONFIG_INPUT is not set
|
||||||
|
# CONFIG_LCD is not set
|
||||||
|
# CONFIG_MMCSD is not set
|
||||||
|
# CONFIG_MTD is not set
|
||||||
|
# CONFIG_PIPES is not set
|
||||||
|
# CONFIG_PM is not set
|
||||||
|
# CONFIG_POWER is not set
|
||||||
|
# CONFIG_SENSORS is not set
|
||||||
|
CONFIG_SERIAL=y
|
||||||
|
CONFIG_DEV_LOWCONSOLE=y
|
||||||
|
# CONFIG_16550_UART is not set
|
||||||
|
CONFIG_ARCH_HAVE_USART1=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# USART Configuration
|
||||||
|
#
|
||||||
|
CONFIG_USART1_ISUART=y
|
||||||
|
CONFIG_MCU_SERIAL=y
|
||||||
|
CONFIG_USART1_SERIAL_CONSOLE=y
|
||||||
|
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USART1 Configuration
|
||||||
|
#
|
||||||
|
CONFIG_USART1_RXBUFSIZE=256
|
||||||
|
CONFIG_USART1_TXBUFSIZE=256
|
||||||
|
CONFIG_USART1_BAUD=115200
|
||||||
|
CONFIG_USART1_BITS=8
|
||||||
|
CONFIG_USART1_PARITY=0
|
||||||
|
CONFIG_USART1_2STOP=0
|
||||||
|
# CONFIG_USART1_IFLOWCONTROL is not set
|
||||||
|
# CONFIG_USART1_OFLOWCONTROL is not set
|
||||||
|
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||||
|
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||||
|
# CONFIG_USBDEV is not set
|
||||||
|
# CONFIG_USBHOST is not set
|
||||||
|
# CONFIG_WIRELESS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging Device Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_RAMLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Support
|
||||||
|
#
|
||||||
|
# CONFIG_NET is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# File Systems
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# File system configuration
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_MOUNTPOINT=y
|
||||||
|
# CONFIG_FS_RAMMAP is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_SYSLOG_ENABLE is not set
|
||||||
|
# CONFIG_SYSLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics Support
|
||||||
|
#
|
||||||
|
# CONFIG_NX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Memory Management
|
||||||
|
#
|
||||||
|
# CONFIG_MM_MULTIHEAP is not set
|
||||||
|
# CONFIG_MM_SMALL is not set
|
||||||
|
CONFIG_MM_REGIONS=1
|
||||||
|
# CONFIG_GRAN is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Audio Support
|
||||||
|
#
|
||||||
|
# CONFIG_AUDIO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Formats
|
||||||
|
#
|
||||||
|
# CONFIG_BINFMT_DISABLE is not set
|
||||||
|
# CONFIG_NXFLAT is not set
|
||||||
|
# CONFIG_ELF is not set
|
||||||
|
# CONFIG_BUILTIN is not set
|
||||||
|
# CONFIG_PIC is not set
|
||||||
|
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Library Routines
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Standard C Library Options
|
||||||
|
#
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=64
|
||||||
|
CONFIG_STDIO_LINEBUFFER=y
|
||||||
|
CONFIG_NUNGET_CHARS=2
|
||||||
|
# CONFIG_LIBM is not set
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||||
|
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||||
|
CONFIG_LIB_RAND_ORDER=1
|
||||||
|
# CONFIG_EOL_IS_CR is not set
|
||||||
|
# CONFIG_EOL_IS_LF is not set
|
||||||
|
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||||
|
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||||
|
# CONFIG_LIBC_EXECFUNCS is not set
|
||||||
|
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||||
|
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||||
|
# CONFIG_LIBC_STRERROR is not set
|
||||||
|
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||||
|
# CONFIG_ARCH_ROMGETC is not set
|
||||||
|
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Non-standard Library Support
|
||||||
|
#
|
||||||
|
# CONFIG_SCHED_WORKQUEUE is not set
|
||||||
|
# CONFIG_LIB_KBDCODEC is not set
|
||||||
|
# CONFIG_LIB_SLCDCODEC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Basic CXX Support
|
||||||
|
#
|
||||||
|
# CONFIG_C99_BOOL8 is not set
|
||||||
|
# CONFIG_HAVE_CXX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Application Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Built-In Applications
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Examples
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||||
|
# CONFIG_EXAMPLES_CAN is not set
|
||||||
|
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||||
|
# CONFIG_EXAMPLES_DHCPD is not set
|
||||||
|
# CONFIG_EXAMPLES_ELF is not set
|
||||||
|
# CONFIG_EXAMPLES_FTPC is not set
|
||||||
|
# CONFIG_EXAMPLES_FTPD is not set
|
||||||
|
CONFIG_EXAMPLES_HELLO=y
|
||||||
|
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||||
|
# CONFIG_EXAMPLES_JSON is not set
|
||||||
|
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||||
|
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_IGMP is not set
|
||||||
|
# CONFIG_EXAMPLES_LCDRW is not set
|
||||||
|
# CONFIG_EXAMPLES_MM is not set
|
||||||
|
# CONFIG_EXAMPLES_MODBUS is not set
|
||||||
|
# CONFIG_EXAMPLES_MOUNT is not set
|
||||||
|
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||||
|
# CONFIG_EXAMPLES_NSH is not set
|
||||||
|
# CONFIG_EXAMPLES_NULL is not set
|
||||||
|
# CONFIG_EXAMPLES_NX is not set
|
||||||
|
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||||
|
# CONFIG_EXAMPLES_NXFFS is not set
|
||||||
|
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||||
|
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||||
|
# CONFIG_EXAMPLES_NXLINES is not set
|
||||||
|
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||||
|
CONFIG_EXAMPLES_OSTEST=y
|
||||||
|
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||||
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||||
|
CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
|
||||||
|
CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
|
||||||
|
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_PIPE is not set
|
||||||
|
# CONFIG_EXAMPLES_POLL is not set
|
||||||
|
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||||
|
# CONFIG_EXAMPLES_QENCODER is not set
|
||||||
|
# CONFIG_EXAMPLES_RGMP is not set
|
||||||
|
# CONFIG_EXAMPLES_ROMFS is not set
|
||||||
|
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||||
|
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||||
|
# CONFIG_EXAMPLES_SLCD is not set
|
||||||
|
# CONFIG_EXAMPLES_SMART is not set
|
||||||
|
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||||
|
# CONFIG_EXAMPLES_TELNETD is not set
|
||||||
|
# CONFIG_EXAMPLES_THTTPD is not set
|
||||||
|
# CONFIG_EXAMPLES_TIFF is not set
|
||||||
|
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||||
|
# CONFIG_EXAMPLES_UDP is not set
|
||||||
|
# CONFIG_EXAMPLES_UIP is not set
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||||
|
# CONFIG_EXAMPLES_USBMSC is not set
|
||||||
|
# CONFIG_EXAMPLES_USBTERM is not set
|
||||||
|
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics Support
|
||||||
|
#
|
||||||
|
# CONFIG_TIFF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Interpreters
|
||||||
|
#
|
||||||
|
# CONFIG_INTERPRETERS_FICL is not set
|
||||||
|
# CONFIG_INTERPRETERS_PCODE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Network Utilities
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Utilities
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_CODECS is not set
|
||||||
|
# CONFIG_NETUTILS_DHCPC is not set
|
||||||
|
# CONFIG_NETUTILS_DHCPD is not set
|
||||||
|
# CONFIG_NETUTILS_FTPC is not set
|
||||||
|
# CONFIG_NETUTILS_FTPD is not set
|
||||||
|
# CONFIG_NETUTILS_JSON is not set
|
||||||
|
# CONFIG_NETUTILS_RESOLV is not set
|
||||||
|
# CONFIG_NETUTILS_SMTP is not set
|
||||||
|
# CONFIG_NETUTILS_TELNETD is not set
|
||||||
|
# CONFIG_NETUTILS_TFTPC is not set
|
||||||
|
# CONFIG_NETUTILS_THTTPD is not set
|
||||||
|
# CONFIG_NETUTILS_UIPLIB is not set
|
||||||
|
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FreeModBus
|
||||||
|
#
|
||||||
|
# CONFIG_MODBUS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NSH Library
|
||||||
|
#
|
||||||
|
# CONFIG_NSH_LIBRARY is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NxWidgets/NxWM
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# System NSH Add-Ons
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Custom Free Memory Command
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_FREE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# I2C tool
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# FLASH Program Installation
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_INSTALL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FLASH Erase-all Command
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAM test
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_RAMTEST is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# readline()
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_READLINE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Power Off
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_POWEROFF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAMTRON
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_RAMTRON is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SD Card
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SDCARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sysinfo
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SYSINFO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Monitor
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Zmodem Commands
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_ZMODEM is not set
|
||||||
76
configs/sama5d3x-ek/hello/setenv.sh
Executable file
76
configs/sama5d3x-ek/hello/setenv.sh
Executable file
@ -0,0 +1,76 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/samard3x-ek/hello/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$_" = "$0" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
if [ ! -x "setenv.sh" ]; then
|
||||||
|
echo "This script must be executed from the top-level NuttX build directory"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then
|
||||||
|
export PATH_ORIG="${PATH}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||||
|
# toolchain under Windows. You will also have to edit this if you install
|
||||||
|
# this toolchain in any other location
|
||||||
|
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||||
|
# toolchain under windows. You will also have to edit this if you install
|
||||||
|
# the CodeSourcery toolchain in any other location
|
||||||
|
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||||
|
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||||
|
|
||||||
|
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||||
|
# toolchain under windows. You will also have to edit this if you install
|
||||||
|
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||||
|
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||||
|
# at those locations as well.
|
||||||
|
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||||
|
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I build the buildroot
|
||||||
|
# toolchain.
|
||||||
|
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||||
|
|
||||||
|
# Add the path to the toolchain to the PATH varialble
|
||||||
|
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
Loading…
Reference in New Issue
Block a user