sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

SAM MMCSD/SPI related changes

Browse Source
This commit is contained in:
Gregory Nutt 2013-06-15 17:00:52 -06:00
parent 0b6e12e853
commit dd2983e26a
3 changed files with 13 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
configs/sam4l-xplained/README.txt
View File

@ -719,3 +719,9 @@ Configuration sub-directories
Application Configuration -> NSH Library
CONFIG_NSH_ARCHINIT=y : Board has architecture-specific initialization
NOTE: If you enable the I/O1 this configuration with USART0 as the
console and with the I/O1 module in EXT1, you *must* remove UART
jumper. Otherwise, you have lookpack on USART0 and NSH will *not*
behave very well (since its outgoing prompts also appear as incoming
commands).

2
configs/sam4l-xplained/src/sam_mmcsd.c
View File

@ -86,7 +86,6 @@
int sam_sdinitialize(int minor)
{
#ifdef HAVE_MMCSD
FAR struct spi_dev_s *spi;
int ret;
@ -118,7 +117,6 @@ int sam_sdinitialize(int minor)
fvdbg("Successfuly bound SPI port %d to MMC/SD slot %d\n",
SAM34_MMCSDSPIPORTNO, SAM34_MMCSDSLOTNO);
#endif
return OK;
}

12
drivers/mmcsd/mmcsd_spi.c
View File

@ -348,7 +348,10 @@ static void mmcsd_semtake(FAR struct mmcsd_slot_s *slot)
#ifndef CONFIG_SPI_OWNBUS
(void)SPI_LOCK(slot->spi, true);
/* Set the frequency, as some other driver could have changed it. */
/* Set the frequency, as some other driver could have changed it.
* TODO: Also need to restore mode and number-of-bits. Those can also
* change from SPI device-to-device.
*/
SPI_SETFREQUENCY(slot->spi, slot->spispeed);
#endif
@ -694,9 +697,9 @@ static void mmcsd_decodecsd(FAR struct mmcsd_slot_s *slot, uint8_t *csd)
}
/* Store the value for future use */
slot->spispeed = frequency;
/* Set the actual SPI frequency as close as possible to that value */
frequency = SPI_SETFREQUENCY(spi, frequency);
@ -1253,7 +1256,6 @@ static ssize_t mmcsd_write(FAR struct inode *inode, const unsigned char *buffer,
size_t nbytes;
off_t offset;
uint8_t response;
int ret;
int i;
fvdbg("start_sector=%d nsectors=%d\n", start_sector, nsectors);
@ -1394,7 +1396,7 @@ static ssize_t mmcsd_write(FAR struct inode *inode, const unsigned char *buffer,
/* Wait until the card is no longer busy */
ret = mmcsd_waitready(slot);
(void)mmcsd_waitready(slot);
SPI_SELECT(spi, SPIDEV_MMCSD, false);
SPI_SEND(spi, 0xff);
mmcsd_semgive(slot);